xref: /linux/drivers/ata/pata_buddha.c (revision e7d759f31ca295d589f7420719c311870bb3166f)
1 // SPDX-License-Identifier: GPL-2.0
2 
3 /*
4  * Buddha, Catweasel and X-Surf PATA controller driver
5  *
6  * Copyright (c) 2018 Samsung Electronics Co., Ltd.
7  *		http://www.samsung.com
8  *
9  * Based on buddha.c:
10  *
11  *	Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
12  */
13 
14 #include <linux/ata.h>
15 #include <linux/blkdev.h>
16 #include <linux/delay.h>
17 #include <linux/interrupt.h>
18 #include <linux/kernel.h>
19 #include <linux/libata.h>
20 #include <linux/mm.h>
21 #include <linux/mod_devicetable.h>
22 #include <linux/module.h>
23 #include <linux/types.h>
24 #include <linux/zorro.h>
25 #include <scsi/scsi_cmnd.h>
26 #include <scsi/scsi_host.h>
27 
28 #include <asm/amigahw.h>
29 #include <asm/amigaints.h>
30 #include <asm/setup.h>
31 
32 #define DRV_NAME "pata_buddha"
33 #define DRV_VERSION "0.1.1"
34 
35 #define BUDDHA_BASE1	0x800
36 #define BUDDHA_BASE2	0xa00
37 #define BUDDHA_BASE3	0xc00
38 #define XSURF_BASE1	0xb000 /* 2.5" interface */
39 #define XSURF_BASE2	0xd000 /* 3.5" interface */
40 #define BUDDHA_CONTROL	0x11a
41 #define BUDDHA_IRQ	0xf00
42 #define XSURF_IRQ	0x7e
43 #define BUDDHA_IRQ_MR	0xfc0	/* master interrupt enable */
44 
45 enum {
46 	BOARD_BUDDHA = 0,
47 	BOARD_CATWEASEL,
48 	BOARD_XSURF
49 };
50 
51 static unsigned int buddha_bases[3] = {
52 	BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
53 };
54 
55 static unsigned int xsurf_bases[2] = {
56 	XSURF_BASE1, XSURF_BASE2
57 };
58 
59 static const struct scsi_host_template pata_buddha_sht = {
60 	ATA_PIO_SHT(DRV_NAME),
61 };
62 
63 /* FIXME: is this needed? */
64 static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc,
65 					 unsigned char *buf,
66 					 unsigned int buflen, int rw)
67 {
68 	struct ata_device *dev = qc->dev;
69 	struct ata_port *ap = dev->link->ap;
70 	void __iomem *data_addr = ap->ioaddr.data_addr;
71 	unsigned int words = buflen >> 1;
72 
73 	/* Transfer multiple of 2 bytes */
74 	if (rw == READ)
75 		raw_insw((u16 *)data_addr, (u16 *)buf, words);
76 	else
77 		raw_outsw((u16 *)data_addr, (u16 *)buf, words);
78 
79 	/* Transfer trailing byte, if any. */
80 	if (unlikely(buflen & 0x01)) {
81 		unsigned char pad[2] = { };
82 
83 		/* Point buf to the tail of buffer */
84 		buf += buflen - 1;
85 
86 		if (rw == READ) {
87 			raw_insw((u16 *)data_addr, (u16 *)pad, 1);
88 			*buf = pad[0];
89 		} else {
90 			pad[0] = *buf;
91 			raw_outsw((u16 *)data_addr, (u16 *)pad, 1);
92 		}
93 		words++;
94 	}
95 
96 	return words << 1;
97 }
98 
99 /*
100  * Provide our own set_mode() as we don't want to change anything that has
101  * already been configured..
102  */
103 static int pata_buddha_set_mode(struct ata_link *link,
104 				struct ata_device **unused)
105 {
106 	struct ata_device *dev;
107 
108 	ata_for_each_dev(dev, link, ENABLED) {
109 		/* We don't really care */
110 		dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
111 		dev->xfer_shift = ATA_SHIFT_PIO;
112 		dev->flags |= ATA_DFLAG_PIO;
113 		ata_dev_info(dev, "configured for PIO\n");
114 	}
115 	return 0;
116 }
117 
118 static bool pata_buddha_irq_check(struct ata_port *ap)
119 {
120 	u8 ch;
121 
122 	ch = z_readb((unsigned long)ap->private_data);
123 
124 	return !!(ch & 0x80);
125 }
126 
127 static void pata_xsurf_irq_clear(struct ata_port *ap)
128 {
129 	z_writeb(0, (unsigned long)ap->private_data);
130 }
131 
132 static struct ata_port_operations pata_buddha_ops = {
133 	.inherits	= &ata_sff_port_ops,
134 	.sff_data_xfer	= pata_buddha_data_xfer,
135 	.sff_irq_check	= pata_buddha_irq_check,
136 	.cable_detect	= ata_cable_unknown,
137 	.set_mode	= pata_buddha_set_mode,
138 };
139 
140 static struct ata_port_operations pata_xsurf_ops = {
141 	.inherits	= &ata_sff_port_ops,
142 	.sff_data_xfer	= pata_buddha_data_xfer,
143 	.sff_irq_check	= pata_buddha_irq_check,
144 	.sff_irq_clear	= pata_xsurf_irq_clear,
145 	.cable_detect	= ata_cable_unknown,
146 	.set_mode	= pata_buddha_set_mode,
147 };
148 
149 static int pata_buddha_probe(struct zorro_dev *z,
150 			     const struct zorro_device_id *ent)
151 {
152 	static const char * const board_name[] = {
153 		"Buddha", "Catweasel", "X-Surf"
154 	};
155 	struct ata_host *host;
156 	void __iomem *buddha_board;
157 	unsigned long board;
158 	unsigned int type = ent->driver_data;
159 	unsigned int nr_ports = (type == BOARD_CATWEASEL) ? 3 : 2;
160 	void *old_drvdata;
161 	int i;
162 
163 	dev_info(&z->dev, "%s IDE controller\n", board_name[type]);
164 
165 	board = z->resource.start;
166 
167 	if (type != BOARD_XSURF) {
168 		if (!devm_request_mem_region(&z->dev,
169 					     board + BUDDHA_BASE1,
170 					     0x800, DRV_NAME))
171 			return -ENXIO;
172 	} else {
173 		if (!devm_request_mem_region(&z->dev,
174 					     board + XSURF_BASE1,
175 					     0x1000, DRV_NAME))
176 			return -ENXIO;
177 		if (!devm_request_mem_region(&z->dev,
178 					     board + XSURF_BASE2,
179 					     0x1000, DRV_NAME)) {
180 		}
181 	}
182 
183 	/* Workaround for X-Surf: Save drvdata in case zorro8390 has set it */
184 	if (type == BOARD_XSURF)
185 		old_drvdata = dev_get_drvdata(&z->dev);
186 
187 	/* allocate host */
188 	host = ata_host_alloc(&z->dev, nr_ports);
189 	if (type == BOARD_XSURF)
190 		dev_set_drvdata(&z->dev, old_drvdata);
191 	if (!host)
192 		return -ENXIO;
193 
194 	buddha_board = ZTWO_VADDR(board);
195 
196 	/* enable the board IRQ on Buddha/Catweasel */
197 	if (type != BOARD_XSURF)
198 		z_writeb(0, buddha_board + BUDDHA_IRQ_MR);
199 
200 	for (i = 0; i < nr_ports; i++) {
201 		struct ata_port *ap = host->ports[i];
202 		void __iomem *base, *irqport;
203 		unsigned long ctl = 0;
204 
205 		if (type != BOARD_XSURF) {
206 			ap->ops = &pata_buddha_ops;
207 			base = buddha_board + buddha_bases[i];
208 			ctl = BUDDHA_CONTROL;
209 			irqport = buddha_board + BUDDHA_IRQ + i * 0x40;
210 		} else {
211 			ap->ops = &pata_xsurf_ops;
212 			base = buddha_board + xsurf_bases[i];
213 			/* X-Surf has no CS1* (Control/AltStat) */
214 			irqport = buddha_board + XSURF_IRQ;
215 		}
216 
217 		ap->pio_mask = ATA_PIO4;
218 		ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
219 
220 		ap->ioaddr.data_addr		= base;
221 		ap->ioaddr.error_addr		= base + 2 + 1 * 4;
222 		ap->ioaddr.feature_addr		= base + 2 + 1 * 4;
223 		ap->ioaddr.nsect_addr		= base + 2 + 2 * 4;
224 		ap->ioaddr.lbal_addr		= base + 2 + 3 * 4;
225 		ap->ioaddr.lbam_addr		= base + 2 + 4 * 4;
226 		ap->ioaddr.lbah_addr		= base + 2 + 5 * 4;
227 		ap->ioaddr.device_addr		= base + 2 + 6 * 4;
228 		ap->ioaddr.status_addr		= base + 2 + 7 * 4;
229 		ap->ioaddr.command_addr		= base + 2 + 7 * 4;
230 
231 		if (ctl) {
232 			ap->ioaddr.altstatus_addr = base + ctl;
233 			ap->ioaddr.ctl_addr	  = base + ctl;
234 		}
235 
236 		ap->private_data = (void *)irqport;
237 
238 		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board,
239 			      ctl ? board + buddha_bases[i] + ctl : 0);
240 	}
241 
242 	ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt,
243 			  IRQF_SHARED, &pata_buddha_sht);
244 
245 	return 0;
246 }
247 
248 static void pata_buddha_remove(struct zorro_dev *z)
249 {
250 	struct ata_host *host = dev_get_drvdata(&z->dev);
251 
252 	ata_host_detach(host);
253 }
254 
255 static const struct zorro_device_id pata_buddha_zorro_tbl[] = {
256 	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA, BOARD_BUDDHA},
257 	{ ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL, BOARD_CATWEASEL},
258 	{ 0 }
259 };
260 MODULE_DEVICE_TABLE(zorro, pata_buddha_zorro_tbl);
261 
262 static struct zorro_driver pata_buddha_driver = {
263 	.name           = "pata_buddha",
264 	.id_table       = pata_buddha_zorro_tbl,
265 	.probe          = pata_buddha_probe,
266 	.remove         = pata_buddha_remove,
267 };
268 
269 /*
270  * We cannot have a modalias for X-Surf boards, as it competes with the
271  * zorro8390 network driver. As a stopgap measure until we have proper
272  * MFD support for this board, we manually attach to it late after Zorro
273  * has enumerated its boards.
274  */
275 static int __init pata_buddha_late_init(void)
276 {
277 	struct zorro_dev *z = NULL;
278 
279 	/* Auto-bind to regular boards */
280 	zorro_register_driver(&pata_buddha_driver);
281 
282 	/* Manually bind to all X-Surf boards */
283 	while ((z = zorro_find_device(ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, z))) {
284 		static struct zorro_device_id xsurf_ent = {
285 			ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF, BOARD_XSURF
286 		};
287 
288 		pata_buddha_probe(z, &xsurf_ent);
289 	}
290 
291 	return 0;
292 }
293 late_initcall(pata_buddha_late_init);
294 
295 MODULE_AUTHOR("Bartlomiej Zolnierkiewicz");
296 MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA");
297 MODULE_LICENSE("GPL v2");
298 MODULE_VERSION(DRV_VERSION);
299