1 /* 2 * pata_ali.c - ALI 15x3 PATA for new ATA layer 3 * (C) 2005 Red Hat Inc 4 * 5 * based in part upon 6 * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02 7 * 8 * Copyright (C) 1998-2000 Michel Aubry, Maintainer 9 * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer 10 * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer 11 * 12 * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org) 13 * May be copied or modified under the terms of the GNU General Public License 14 * Copyright (C) 2002 Alan Cox <alan@redhat.com> 15 * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> 16 * 17 * Documentation 18 * Chipset documentation available under NDA only 19 * 20 * TODO/CHECK 21 * Cannot have ATAPI on both master & slave for rev < c2 (???) but 22 * otherwise should do atapi DMA (For now for old we do PIO only for 23 * ATAPI) 24 * Review Sunblade workaround. 25 */ 26 27 #include <linux/kernel.h> 28 #include <linux/module.h> 29 #include <linux/pci.h> 30 #include <linux/init.h> 31 #include <linux/blkdev.h> 32 #include <linux/delay.h> 33 #include <scsi/scsi_host.h> 34 #include <linux/libata.h> 35 #include <linux/dmi.h> 36 37 #define DRV_NAME "pata_ali" 38 #define DRV_VERSION "0.7.8" 39 40 static int ali_atapi_dma = 0; 41 module_param_named(atapi_dma, ali_atapi_dma, int, 0644); 42 MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)"); 43 44 static struct pci_dev *ali_isa_bridge; 45 46 /* 47 * Cable special cases 48 */ 49 50 static const struct dmi_system_id cable_dmi_table[] = { 51 { 52 .ident = "HP Pavilion N5430", 53 .matches = { 54 DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"), 55 DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), 56 }, 57 }, 58 { 59 .ident = "Toshiba Satelite S1800-814", 60 .matches = { 61 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), 62 DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"), 63 }, 64 }, 65 { } 66 }; 67 68 static int ali_cable_override(struct pci_dev *pdev) 69 { 70 /* Fujitsu P2000 */ 71 if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF) 72 return 1; 73 /* Mitac 8317 (Winbook-A) and relatives */ 74 if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317) 75 return 1; 76 /* Systems by DMI */ 77 if (dmi_check_system(cable_dmi_table)) 78 return 1; 79 return 0; 80 } 81 82 /** 83 * ali_c2_cable_detect - cable detection 84 * @ap: ATA port 85 * 86 * Perform cable detection for C2 and later revisions 87 */ 88 89 static int ali_c2_cable_detect(struct ata_port *ap) 90 { 91 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 92 u8 ata66; 93 94 /* Certain laptops use short but suitable cables and don't 95 implement the detect logic */ 96 97 if (ali_cable_override(pdev)) 98 return ATA_CBL_PATA40_SHORT; 99 100 /* Host view cable detect 0x4A bit 0 primary bit 1 secondary 101 Bit set for 40 pin */ 102 pci_read_config_byte(pdev, 0x4A, &ata66); 103 if (ata66 & (1 << ap->port_no)) 104 return ATA_CBL_PATA40; 105 else 106 return ATA_CBL_PATA80; 107 } 108 109 /** 110 * ali_20_filter - filter for earlier ALI DMA 111 * @ap: ALi ATA port 112 * @adev: attached device 113 * 114 * Ensure that we do not do DMA on CD devices. We may be able to 115 * fix that later on. Also ensure we do not do UDMA on WDC drives 116 */ 117 118 static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask) 119 { 120 char model_num[ATA_ID_PROD_LEN + 1]; 121 /* No DMA on anything but a disk for now */ 122 if (adev->class != ATA_DEV_ATA) 123 mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); 124 ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num)); 125 if (strstr(model_num, "WDC")) 126 return mask &= ~ATA_MASK_UDMA; 127 return ata_bmdma_mode_filter(adev, mask); 128 } 129 130 /** 131 * ali_fifo_control - FIFO manager 132 * @ap: ALi channel to control 133 * @adev: device for FIFO control 134 * @on: 0 for off 1 for on 135 * 136 * Enable or disable the FIFO on a given device. Because of the way the 137 * ALi FIFO works it provides a boost on ATA disk but can be confused by 138 * ATAPI and we must therefore manage it. 139 */ 140 141 static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int on) 142 { 143 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 144 int pio_fifo = 0x54 + ap->port_no; 145 u8 fifo; 146 int shift = 4 * adev->devno; 147 148 /* ATA - FIFO on set nibble to 0x05, ATAPI - FIFO off, set nibble to 149 0x00. Not all the docs agree but the behaviour we now use is the 150 one stated in the BIOS Programming Guide */ 151 152 pci_read_config_byte(pdev, pio_fifo, &fifo); 153 fifo &= ~(0x0F << shift); 154 fifo |= (on << shift); 155 pci_write_config_byte(pdev, pio_fifo, fifo); 156 } 157 158 /** 159 * ali_program_modes - load mode registers 160 * @ap: ALi channel to load 161 * @adev: Device the timing is for 162 * @cmd: Command timing 163 * @data: Data timing 164 * @ultra: UDMA timing or zero for off 165 * 166 * Loads the timing registers for cmd/data and disable UDMA if 167 * ultra is zero. If ultra is set then load and enable the UDMA 168 * timing but do not touch the command/data timing. 169 */ 170 171 static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, struct ata_timing *t, u8 ultra) 172 { 173 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 174 int cas = 0x58 + 4 * ap->port_no; /* Command timing */ 175 int cbt = 0x59 + 4 * ap->port_no; /* Command timing */ 176 int drwt = 0x5A + 4 * ap->port_no + adev->devno; /* R/W timing */ 177 int udmat = 0x56 + ap->port_no; /* UDMA timing */ 178 int shift = 4 * adev->devno; 179 u8 udma; 180 181 if (t != NULL) { 182 t->setup = clamp_val(t->setup, 1, 8) & 7; 183 t->act8b = clamp_val(t->act8b, 1, 8) & 7; 184 t->rec8b = clamp_val(t->rec8b, 1, 16) & 15; 185 t->active = clamp_val(t->active, 1, 8) & 7; 186 t->recover = clamp_val(t->recover, 1, 16) & 15; 187 188 pci_write_config_byte(pdev, cas, t->setup); 189 pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b); 190 pci_write_config_byte(pdev, drwt, (t->active << 4) | t->recover); 191 } 192 193 /* Set up the UDMA enable */ 194 pci_read_config_byte(pdev, udmat, &udma); 195 udma &= ~(0x0F << shift); 196 udma |= ultra << shift; 197 pci_write_config_byte(pdev, udmat, udma); 198 } 199 200 /** 201 * ali_set_piomode - set initial PIO mode data 202 * @ap: ATA interface 203 * @adev: ATA device 204 * 205 * Program the ALi registers for PIO mode. FIXME: add timings for 206 * PIO5. 207 */ 208 209 static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev) 210 { 211 struct ata_device *pair = ata_dev_pair(adev); 212 struct ata_timing t; 213 unsigned long T = 1000000000 / 33333; /* PCI clock based */ 214 215 ata_timing_compute(adev, adev->pio_mode, &t, T, 1); 216 if (pair) { 217 struct ata_timing p; 218 ata_timing_compute(pair, pair->pio_mode, &p, T, 1); 219 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); 220 if (pair->dma_mode) { 221 ata_timing_compute(pair, pair->dma_mode, &p, T, 1); 222 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); 223 } 224 } 225 226 /* PIO FIFO is only permitted on ATA disk */ 227 if (adev->class != ATA_DEV_ATA) 228 ali_fifo_control(ap, adev, 0x00); 229 ali_program_modes(ap, adev, &t, 0); 230 if (adev->class == ATA_DEV_ATA) 231 ali_fifo_control(ap, adev, 0x05); 232 233 } 234 235 /** 236 * ali_set_dmamode - set initial DMA mode data 237 * @ap: ATA interface 238 * @adev: ATA device 239 * 240 * FIXME: MWDMA timings 241 */ 242 243 static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) 244 { 245 static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD }; 246 struct ata_device *pair = ata_dev_pair(adev); 247 struct ata_timing t; 248 unsigned long T = 1000000000 / 33333; /* PCI clock based */ 249 struct pci_dev *pdev = to_pci_dev(ap->host->dev); 250 251 252 if (adev->class == ATA_DEV_ATA) 253 ali_fifo_control(ap, adev, 0x08); 254 255 if (adev->dma_mode >= XFER_UDMA_0) { 256 ali_program_modes(ap, adev, NULL, udma_timing[adev->dma_mode - XFER_UDMA_0]); 257 if (adev->dma_mode >= XFER_UDMA_3) { 258 u8 reg4b; 259 pci_read_config_byte(pdev, 0x4B, ®4b); 260 reg4b |= 1; 261 pci_write_config_byte(pdev, 0x4B, reg4b); 262 } 263 } else { 264 ata_timing_compute(adev, adev->dma_mode, &t, T, 1); 265 if (pair) { 266 struct ata_timing p; 267 ata_timing_compute(pair, pair->pio_mode, &p, T, 1); 268 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); 269 if (pair->dma_mode) { 270 ata_timing_compute(pair, pair->dma_mode, &p, T, 1); 271 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT); 272 } 273 } 274 ali_program_modes(ap, adev, &t, 0); 275 } 276 } 277 278 /** 279 * ali_warn_atapi_dma - Warn about ATAPI DMA disablement 280 * @adev: Device 281 * 282 * Whine about ATAPI DMA disablement if @adev is an ATAPI device. 283 * Can be used as ->dev_config. 284 */ 285 286 static void ali_warn_atapi_dma(struct ata_device *adev) 287 { 288 struct ata_eh_context *ehc = &adev->link->eh_context; 289 int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; 290 291 if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) { 292 ata_dev_printk(adev, KERN_WARNING, 293 "WARNING: ATAPI DMA disabled for reliability issues. It can be enabled\n"); 294 ata_dev_printk(adev, KERN_WARNING, 295 "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n"); 296 } 297 } 298 299 /** 300 * ali_lock_sectors - Keep older devices to 255 sector mode 301 * @adev: Device 302 * 303 * Called during the bus probe for each device that is found. We use 304 * this call to lock the sector count of the device to 255 or less on 305 * older ALi controllers. If we didn't do this then large I/O's would 306 * require LBA48 commands which the older ALi requires are issued by 307 * slower PIO methods 308 */ 309 310 static void ali_lock_sectors(struct ata_device *adev) 311 { 312 adev->max_sectors = 255; 313 ali_warn_atapi_dma(adev); 314 } 315 316 /** 317 * ali_check_atapi_dma - DMA check for most ALi controllers 318 * @adev: Device 319 * 320 * Called to decide whether commands should be sent by DMA or PIO 321 */ 322 323 static int ali_check_atapi_dma(struct ata_queued_cmd *qc) 324 { 325 if (!ali_atapi_dma) { 326 /* FIXME: pata_ali can't do ATAPI DMA reliably but the 327 * IDE alim15x3 driver can. I tried lots of things 328 * but couldn't find what the actual difference was. 329 * If you got an idea, please write it to 330 * linux-ide@vger.kernel.org and cc htejun@gmail.com. 331 * 332 * Disable ATAPI DMA for now. 333 */ 334 return -EOPNOTSUPP; 335 } 336 337 /* If its not a media command, its not worth it */ 338 if (atapi_cmd_type(qc->cdb[0]) == ATAPI_MISC) 339 return -EOPNOTSUPP; 340 return 0; 341 } 342 343 static void ali_c2_c3_postreset(struct ata_link *link, unsigned int *classes) 344 { 345 u8 r; 346 int port_bit = 4 << link->ap->port_no; 347 348 /* If our bridge is an ALI 1533 then do the extra work */ 349 if (ali_isa_bridge) { 350 /* Tristate and re-enable the bus signals */ 351 pci_read_config_byte(ali_isa_bridge, 0x58, &r); 352 r &= ~port_bit; 353 pci_write_config_byte(ali_isa_bridge, 0x58, r); 354 r |= port_bit; 355 pci_write_config_byte(ali_isa_bridge, 0x58, r); 356 } 357 ata_sff_postreset(link, classes); 358 } 359 360 static struct scsi_host_template ali_sht = { 361 ATA_BMDMA_SHT(DRV_NAME), 362 }; 363 364 /* 365 * Port operations for PIO only ALi 366 */ 367 368 static struct ata_port_operations ali_early_port_ops = { 369 .inherits = &ata_sff_port_ops, 370 .cable_detect = ata_cable_40wire, 371 .set_piomode = ali_set_piomode, 372 .sff_data_xfer = ata_sff_data_xfer32, 373 }; 374 375 static const struct ata_port_operations ali_dma_base_ops = { 376 .inherits = &ata_bmdma32_port_ops, 377 .set_piomode = ali_set_piomode, 378 .set_dmamode = ali_set_dmamode, 379 }; 380 381 /* 382 * Port operations for DMA capable ALi without cable 383 * detect 384 */ 385 static struct ata_port_operations ali_20_port_ops = { 386 .inherits = &ali_dma_base_ops, 387 .cable_detect = ata_cable_40wire, 388 .mode_filter = ali_20_filter, 389 .check_atapi_dma = ali_check_atapi_dma, 390 .dev_config = ali_lock_sectors, 391 }; 392 393 /* 394 * Port operations for DMA capable ALi with cable detect 395 */ 396 static struct ata_port_operations ali_c2_port_ops = { 397 .inherits = &ali_dma_base_ops, 398 .check_atapi_dma = ali_check_atapi_dma, 399 .cable_detect = ali_c2_cable_detect, 400 .dev_config = ali_lock_sectors, 401 .postreset = ali_c2_c3_postreset, 402 }; 403 404 /* 405 * Port operations for DMA capable ALi with cable detect 406 */ 407 static struct ata_port_operations ali_c4_port_ops = { 408 .inherits = &ali_dma_base_ops, 409 .check_atapi_dma = ali_check_atapi_dma, 410 .cable_detect = ali_c2_cable_detect, 411 .dev_config = ali_lock_sectors, 412 }; 413 414 /* 415 * Port operations for DMA capable ALi with cable detect and LBA48 416 */ 417 static struct ata_port_operations ali_c5_port_ops = { 418 .inherits = &ali_dma_base_ops, 419 .check_atapi_dma = ali_check_atapi_dma, 420 .dev_config = ali_warn_atapi_dma, 421 .cable_detect = ali_c2_cable_detect, 422 }; 423 424 425 /** 426 * ali_init_chipset - chip setup function 427 * @pdev: PCI device of ATA controller 428 * 429 * Perform the setup on the device that must be done both at boot 430 * and at resume time. 431 */ 432 433 static void ali_init_chipset(struct pci_dev *pdev) 434 { 435 u8 tmp; 436 struct pci_dev *north; 437 438 /* 439 * The chipset revision selects the driver operations and 440 * mode data. 441 */ 442 443 if (pdev->revision <= 0x20) { 444 pci_read_config_byte(pdev, 0x53, &tmp); 445 tmp |= 0x03; 446 pci_write_config_byte(pdev, 0x53, tmp); 447 } else { 448 pci_read_config_byte(pdev, 0x4a, &tmp); 449 pci_write_config_byte(pdev, 0x4a, tmp | 0x20); 450 pci_read_config_byte(pdev, 0x4B, &tmp); 451 if (pdev->revision < 0xC2) 452 /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */ 453 /* Clear CD-ROM DMA write bit */ 454 tmp &= 0x7F; 455 /* Cable and UDMA */ 456 pci_write_config_byte(pdev, 0x4B, tmp | 0x09); 457 /* 458 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want 459 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control 460 * via 0x54/55. 461 */ 462 pci_read_config_byte(pdev, 0x53, &tmp); 463 if (pdev->revision >= 0xc7) 464 tmp |= 0x03; 465 else 466 tmp |= 0x01; /* CD_ROM enable for DMA */ 467 pci_write_config_byte(pdev, 0x53, tmp); 468 } 469 north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0)); 470 if (north && north->vendor == PCI_VENDOR_ID_AL && ali_isa_bridge) { 471 /* Configure the ALi bridge logic. For non ALi rely on BIOS. 472 Set the south bridge enable bit */ 473 pci_read_config_byte(ali_isa_bridge, 0x79, &tmp); 474 if (pdev->revision == 0xC2) 475 pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x04); 476 else if (pdev->revision > 0xC2 && pdev->revision < 0xC5) 477 pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x02); 478 } 479 pci_dev_put(north); 480 ata_pci_bmdma_clear_simplex(pdev); 481 } 482 /** 483 * ali_init_one - discovery callback 484 * @pdev: PCI device ID 485 * @id: PCI table info 486 * 487 * An ALi IDE interface has been discovered. Figure out what revision 488 * and perform configuration work before handing it to the ATA layer 489 */ 490 491 static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) 492 { 493 static const struct ata_port_info info_early = { 494 .flags = ATA_FLAG_SLAVE_POSS, 495 .pio_mask = ATA_PIO4, 496 .port_ops = &ali_early_port_ops 497 }; 498 /* Revision 0x20 added DMA */ 499 static const struct ata_port_info info_20 = { 500 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | 501 ATA_FLAG_IGN_SIMPLEX, 502 .pio_mask = ATA_PIO4, 503 .mwdma_mask = ATA_MWDMA2, 504 .port_ops = &ali_20_port_ops 505 }; 506 /* Revision 0x20 with support logic added UDMA */ 507 static const struct ata_port_info info_20_udma = { 508 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | 509 ATA_FLAG_IGN_SIMPLEX, 510 .pio_mask = ATA_PIO4, 511 .mwdma_mask = ATA_MWDMA2, 512 .udma_mask = ATA_UDMA2, 513 .port_ops = &ali_20_port_ops 514 }; 515 /* Revision 0xC2 adds UDMA66 */ 516 static const struct ata_port_info info_c2 = { 517 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | 518 ATA_FLAG_IGN_SIMPLEX, 519 .pio_mask = ATA_PIO4, 520 .mwdma_mask = ATA_MWDMA2, 521 .udma_mask = ATA_UDMA4, 522 .port_ops = &ali_c2_port_ops 523 }; 524 /* Revision 0xC3 is UDMA66 for now */ 525 static const struct ata_port_info info_c3 = { 526 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | 527 ATA_FLAG_IGN_SIMPLEX, 528 .pio_mask = ATA_PIO4, 529 .mwdma_mask = ATA_MWDMA2, 530 .udma_mask = ATA_UDMA4, 531 .port_ops = &ali_c2_port_ops 532 }; 533 /* Revision 0xC4 is UDMA100 */ 534 static const struct ata_port_info info_c4 = { 535 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 | 536 ATA_FLAG_IGN_SIMPLEX, 537 .pio_mask = ATA_PIO4, 538 .mwdma_mask = ATA_MWDMA2, 539 .udma_mask = ATA_UDMA5, 540 .port_ops = &ali_c4_port_ops 541 }; 542 /* Revision 0xC5 is UDMA133 with LBA48 DMA */ 543 static const struct ata_port_info info_c5 = { 544 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_IGN_SIMPLEX, 545 .pio_mask = ATA_PIO4, 546 .mwdma_mask = ATA_MWDMA2, 547 .udma_mask = ATA_UDMA6, 548 .port_ops = &ali_c5_port_ops 549 }; 550 551 const struct ata_port_info *ppi[] = { NULL, NULL }; 552 u8 tmp; 553 int rc; 554 555 rc = pcim_enable_device(pdev); 556 if (rc) 557 return rc; 558 559 /* 560 * The chipset revision selects the driver operations and 561 * mode data. 562 */ 563 564 if (pdev->revision < 0x20) { 565 ppi[0] = &info_early; 566 } else if (pdev->revision < 0xC2) { 567 ppi[0] = &info_20; 568 } else if (pdev->revision == 0xC2) { 569 ppi[0] = &info_c2; 570 } else if (pdev->revision == 0xC3) { 571 ppi[0] = &info_c3; 572 } else if (pdev->revision == 0xC4) { 573 ppi[0] = &info_c4; 574 } else 575 ppi[0] = &info_c5; 576 577 ali_init_chipset(pdev); 578 579 if (ali_isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) { 580 /* Are we paired with a UDMA capable chip */ 581 pci_read_config_byte(ali_isa_bridge, 0x5E, &tmp); 582 if ((tmp & 0x1E) == 0x12) 583 ppi[0] = &info_20_udma; 584 } 585 586 return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL); 587 } 588 589 #ifdef CONFIG_PM 590 static int ali_reinit_one(struct pci_dev *pdev) 591 { 592 struct ata_host *host = dev_get_drvdata(&pdev->dev); 593 int rc; 594 595 rc = ata_pci_device_do_resume(pdev); 596 if (rc) 597 return rc; 598 ali_init_chipset(pdev); 599 ata_host_resume(host); 600 return 0; 601 } 602 #endif 603 604 static const struct pci_device_id ali[] = { 605 { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), }, 606 { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), }, 607 608 { }, 609 }; 610 611 static struct pci_driver ali_pci_driver = { 612 .name = DRV_NAME, 613 .id_table = ali, 614 .probe = ali_init_one, 615 .remove = ata_pci_remove_one, 616 #ifdef CONFIG_PM 617 .suspend = ata_pci_device_suspend, 618 .resume = ali_reinit_one, 619 #endif 620 }; 621 622 static int __init ali_init(void) 623 { 624 int ret; 625 ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL); 626 627 ret = pci_register_driver(&ali_pci_driver); 628 if (ret < 0) 629 pci_dev_put(ali_isa_bridge); 630 return ret; 631 } 632 633 634 static void __exit ali_exit(void) 635 { 636 pci_unregister_driver(&ali_pci_driver); 637 pci_dev_put(ali_isa_bridge); 638 } 639 640 641 MODULE_AUTHOR("Alan Cox"); 642 MODULE_DESCRIPTION("low-level driver for ALi PATA"); 643 MODULE_LICENSE("GPL"); 644 MODULE_DEVICE_TABLE(pci, ali); 645 MODULE_VERSION(DRV_VERSION); 646 647 module_init(ali_init); 648 module_exit(ali_exit); 649