1 /* 2 * libata-bmdma.c - helper library for PCI IDE BMDMA 3 * 4 * Maintained by: Jeff Garzik <jgarzik@pobox.com> 5 * Please ALWAYS copy linux-ide@vger.kernel.org 6 * on emails. 7 * 8 * Copyright 2003-2006 Red Hat, Inc. All rights reserved. 9 * Copyright 2003-2006 Jeff Garzik 10 * 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation; either version 2, or (at your option) 15 * any later version. 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; see the file COPYING. If not, write to 24 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 * 27 * libata documentation is available via 'make {ps|pdf}docs', 28 * as Documentation/DocBook/libata.* 29 * 30 * Hardware documentation available from http://www.t13.org/ and 31 * http://www.sata-io.org/ 32 * 33 */ 34 35 #include <linux/kernel.h> 36 #include <linux/pci.h> 37 #include <linux/libata.h> 38 39 #include "libata.h" 40 41 /** 42 * ata_irq_on - Enable interrupts on a port. 43 * @ap: Port on which interrupts are enabled. 44 * 45 * Enable interrupts on a legacy IDE device using MMIO or PIO, 46 * wait for idle, clear any pending interrupts. 47 * 48 * LOCKING: 49 * Inherited from caller. 50 */ 51 u8 ata_irq_on(struct ata_port *ap) 52 { 53 struct ata_ioports *ioaddr = &ap->ioaddr; 54 u8 tmp; 55 56 ap->ctl &= ~ATA_NIEN; 57 ap->last_ctl = ap->ctl; 58 59 iowrite8(ap->ctl, ioaddr->ctl_addr); 60 tmp = ata_wait_idle(ap); 61 62 ap->ops->irq_clear(ap); 63 64 return tmp; 65 } 66 67 u8 ata_dummy_irq_on (struct ata_port *ap) { return 0; } 68 69 /** 70 * ata_irq_ack - Acknowledge a device interrupt. 71 * @ap: Port on which interrupts are enabled. 72 * 73 * Wait up to 10 ms for legacy IDE device to become idle (BUSY 74 * or BUSY+DRQ clear). Obtain dma status and port status from 75 * device. Clear the interrupt. Return port status. 76 * 77 * LOCKING: 78 */ 79 80 u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq) 81 { 82 unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY; 83 u8 host_stat, post_stat, status; 84 85 status = ata_busy_wait(ap, bits, 1000); 86 if (status & bits) 87 if (ata_msg_err(ap)) 88 printk(KERN_ERR "abnormal status 0x%X\n", status); 89 90 /* get controller status; clear intr, err bits */ 91 host_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); 92 iowrite8(host_stat | ATA_DMA_INTR | ATA_DMA_ERR, 93 ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); 94 95 post_stat = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); 96 97 if (ata_msg_intr(ap)) 98 printk(KERN_INFO "%s: irq ack: host_stat 0x%X, new host_stat 0x%X, drv_stat 0x%X\n", 99 __FUNCTION__, 100 host_stat, post_stat, status); 101 102 return status; 103 } 104 105 u8 ata_dummy_irq_ack(struct ata_port *ap, unsigned int chk_drq) { return 0; } 106 107 /** 108 * ata_tf_load - send taskfile registers to host controller 109 * @ap: Port to which output is sent 110 * @tf: ATA taskfile register set 111 * 112 * Outputs ATA taskfile to standard ATA host controller. 113 * 114 * LOCKING: 115 * Inherited from caller. 116 */ 117 118 void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) 119 { 120 struct ata_ioports *ioaddr = &ap->ioaddr; 121 unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; 122 123 if (tf->ctl != ap->last_ctl) { 124 iowrite8(tf->ctl, ioaddr->ctl_addr); 125 ap->last_ctl = tf->ctl; 126 ata_wait_idle(ap); 127 } 128 129 if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { 130 iowrite8(tf->hob_feature, ioaddr->feature_addr); 131 iowrite8(tf->hob_nsect, ioaddr->nsect_addr); 132 iowrite8(tf->hob_lbal, ioaddr->lbal_addr); 133 iowrite8(tf->hob_lbam, ioaddr->lbam_addr); 134 iowrite8(tf->hob_lbah, ioaddr->lbah_addr); 135 VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", 136 tf->hob_feature, 137 tf->hob_nsect, 138 tf->hob_lbal, 139 tf->hob_lbam, 140 tf->hob_lbah); 141 } 142 143 if (is_addr) { 144 iowrite8(tf->feature, ioaddr->feature_addr); 145 iowrite8(tf->nsect, ioaddr->nsect_addr); 146 iowrite8(tf->lbal, ioaddr->lbal_addr); 147 iowrite8(tf->lbam, ioaddr->lbam_addr); 148 iowrite8(tf->lbah, ioaddr->lbah_addr); 149 VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", 150 tf->feature, 151 tf->nsect, 152 tf->lbal, 153 tf->lbam, 154 tf->lbah); 155 } 156 157 if (tf->flags & ATA_TFLAG_DEVICE) { 158 iowrite8(tf->device, ioaddr->device_addr); 159 VPRINTK("device 0x%X\n", tf->device); 160 } 161 162 ata_wait_idle(ap); 163 } 164 165 /** 166 * ata_exec_command - issue ATA command to host controller 167 * @ap: port to which command is being issued 168 * @tf: ATA taskfile register set 169 * 170 * Issues ATA command, with proper synchronization with interrupt 171 * handler / other threads. 172 * 173 * LOCKING: 174 * spin_lock_irqsave(host lock) 175 */ 176 void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) 177 { 178 DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); 179 180 iowrite8(tf->command, ap->ioaddr.command_addr); 181 ata_pause(ap); 182 } 183 184 /** 185 * ata_tf_read - input device's ATA taskfile shadow registers 186 * @ap: Port from which input is read 187 * @tf: ATA taskfile register set for storing input 188 * 189 * Reads ATA taskfile registers for currently-selected device 190 * into @tf. 191 * 192 * LOCKING: 193 * Inherited from caller. 194 */ 195 void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) 196 { 197 struct ata_ioports *ioaddr = &ap->ioaddr; 198 199 tf->command = ata_check_status(ap); 200 tf->feature = ioread8(ioaddr->error_addr); 201 tf->nsect = ioread8(ioaddr->nsect_addr); 202 tf->lbal = ioread8(ioaddr->lbal_addr); 203 tf->lbam = ioread8(ioaddr->lbam_addr); 204 tf->lbah = ioread8(ioaddr->lbah_addr); 205 tf->device = ioread8(ioaddr->device_addr); 206 207 if (tf->flags & ATA_TFLAG_LBA48) { 208 iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr); 209 tf->hob_feature = ioread8(ioaddr->error_addr); 210 tf->hob_nsect = ioread8(ioaddr->nsect_addr); 211 tf->hob_lbal = ioread8(ioaddr->lbal_addr); 212 tf->hob_lbam = ioread8(ioaddr->lbam_addr); 213 tf->hob_lbah = ioread8(ioaddr->lbah_addr); 214 } 215 } 216 217 /** 218 * ata_check_status - Read device status reg & clear interrupt 219 * @ap: port where the device is 220 * 221 * Reads ATA taskfile status register for currently-selected device 222 * and return its value. This also clears pending interrupts 223 * from this device 224 * 225 * LOCKING: 226 * Inherited from caller. 227 */ 228 u8 ata_check_status(struct ata_port *ap) 229 { 230 return ioread8(ap->ioaddr.status_addr); 231 } 232 233 /** 234 * ata_altstatus - Read device alternate status reg 235 * @ap: port where the device is 236 * 237 * Reads ATA taskfile alternate status register for 238 * currently-selected device and return its value. 239 * 240 * Note: may NOT be used as the check_altstatus() entry in 241 * ata_port_operations. 242 * 243 * LOCKING: 244 * Inherited from caller. 245 */ 246 u8 ata_altstatus(struct ata_port *ap) 247 { 248 if (ap->ops->check_altstatus) 249 return ap->ops->check_altstatus(ap); 250 251 return ioread8(ap->ioaddr.altstatus_addr); 252 } 253 254 /** 255 * ata_bmdma_setup - Set up PCI IDE BMDMA transaction 256 * @qc: Info associated with this ATA transaction. 257 * 258 * LOCKING: 259 * spin_lock_irqsave(host lock) 260 */ 261 void ata_bmdma_setup(struct ata_queued_cmd *qc) 262 { 263 struct ata_port *ap = qc->ap; 264 unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); 265 u8 dmactl; 266 267 /* load PRD table addr. */ 268 mb(); /* make sure PRD table writes are visible to controller */ 269 iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); 270 271 /* specify data direction, triple-check start bit is clear */ 272 dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); 273 dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); 274 if (!rw) 275 dmactl |= ATA_DMA_WR; 276 iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); 277 278 /* issue r/w command */ 279 ap->ops->exec_command(ap, &qc->tf); 280 } 281 282 /** 283 * ata_bmdma_start - Start a PCI IDE BMDMA transaction 284 * @qc: Info associated with this ATA transaction. 285 * 286 * LOCKING: 287 * spin_lock_irqsave(host lock) 288 */ 289 void ata_bmdma_start (struct ata_queued_cmd *qc) 290 { 291 struct ata_port *ap = qc->ap; 292 u8 dmactl; 293 294 /* start host DMA transaction */ 295 dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); 296 iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); 297 298 /* Strictly, one may wish to issue a readb() here, to 299 * flush the mmio write. However, control also passes 300 * to the hardware at this point, and it will interrupt 301 * us when we are to resume control. So, in effect, 302 * we don't care when the mmio write flushes. 303 * Further, a read of the DMA status register _immediately_ 304 * following the write may not be what certain flaky hardware 305 * is expected, so I think it is best to not add a readb() 306 * without first all the MMIO ATA cards/mobos. 307 * Or maybe I'm just being paranoid. 308 */ 309 } 310 311 /** 312 * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. 313 * @ap: Port associated with this ATA transaction. 314 * 315 * Clear interrupt and error flags in DMA status register. 316 * 317 * May be used as the irq_clear() entry in ata_port_operations. 318 * 319 * LOCKING: 320 * spin_lock_irqsave(host lock) 321 */ 322 void ata_bmdma_irq_clear(struct ata_port *ap) 323 { 324 void __iomem *mmio = ap->ioaddr.bmdma_addr; 325 326 if (!mmio) 327 return; 328 329 iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS); 330 } 331 332 /** 333 * ata_bmdma_status - Read PCI IDE BMDMA status 334 * @ap: Port associated with this ATA transaction. 335 * 336 * Read and return BMDMA status register. 337 * 338 * May be used as the bmdma_status() entry in ata_port_operations. 339 * 340 * LOCKING: 341 * spin_lock_irqsave(host lock) 342 */ 343 u8 ata_bmdma_status(struct ata_port *ap) 344 { 345 return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); 346 } 347 348 /** 349 * ata_bmdma_stop - Stop PCI IDE BMDMA transfer 350 * @qc: Command we are ending DMA for 351 * 352 * Clears the ATA_DMA_START flag in the dma control register 353 * 354 * May be used as the bmdma_stop() entry in ata_port_operations. 355 * 356 * LOCKING: 357 * spin_lock_irqsave(host lock) 358 */ 359 void ata_bmdma_stop(struct ata_queued_cmd *qc) 360 { 361 struct ata_port *ap = qc->ap; 362 void __iomem *mmio = ap->ioaddr.bmdma_addr; 363 364 /* clear start/stop bit */ 365 iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, 366 mmio + ATA_DMA_CMD); 367 368 /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ 369 ata_altstatus(ap); /* dummy read */ 370 } 371 372 /** 373 * ata_bmdma_freeze - Freeze BMDMA controller port 374 * @ap: port to freeze 375 * 376 * Freeze BMDMA controller port. 377 * 378 * LOCKING: 379 * Inherited from caller. 380 */ 381 void ata_bmdma_freeze(struct ata_port *ap) 382 { 383 struct ata_ioports *ioaddr = &ap->ioaddr; 384 385 ap->ctl |= ATA_NIEN; 386 ap->last_ctl = ap->ctl; 387 388 iowrite8(ap->ctl, ioaddr->ctl_addr); 389 390 /* Under certain circumstances, some controllers raise IRQ on 391 * ATA_NIEN manipulation. Also, many controllers fail to mask 392 * previously pending IRQ on ATA_NIEN assertion. Clear it. 393 */ 394 ata_chk_status(ap); 395 396 ap->ops->irq_clear(ap); 397 } 398 399 /** 400 * ata_bmdma_thaw - Thaw BMDMA controller port 401 * @ap: port to thaw 402 * 403 * Thaw BMDMA controller port. 404 * 405 * LOCKING: 406 * Inherited from caller. 407 */ 408 void ata_bmdma_thaw(struct ata_port *ap) 409 { 410 /* clear & re-enable interrupts */ 411 ata_chk_status(ap); 412 ap->ops->irq_clear(ap); 413 ap->ops->irq_on(ap); 414 } 415 416 /** 417 * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller 418 * @ap: port to handle error for 419 * @prereset: prereset method (can be NULL) 420 * @softreset: softreset method (can be NULL) 421 * @hardreset: hardreset method (can be NULL) 422 * @postreset: postreset method (can be NULL) 423 * 424 * Handle error for ATA BMDMA controller. It can handle both 425 * PATA and SATA controllers. Many controllers should be able to 426 * use this EH as-is or with some added handling before and 427 * after. 428 * 429 * This function is intended to be used for constructing 430 * ->error_handler callback by low level drivers. 431 * 432 * LOCKING: 433 * Kernel thread context (may sleep) 434 */ 435 void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset, 436 ata_reset_fn_t softreset, ata_reset_fn_t hardreset, 437 ata_postreset_fn_t postreset) 438 { 439 struct ata_queued_cmd *qc; 440 unsigned long flags; 441 int thaw = 0; 442 443 qc = __ata_qc_from_tag(ap, ap->active_tag); 444 if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) 445 qc = NULL; 446 447 /* reset PIO HSM and stop DMA engine */ 448 spin_lock_irqsave(ap->lock, flags); 449 450 ap->hsm_task_state = HSM_ST_IDLE; 451 452 if (qc && (qc->tf.protocol == ATA_PROT_DMA || 453 qc->tf.protocol == ATA_PROT_ATAPI_DMA)) { 454 u8 host_stat; 455 456 host_stat = ap->ops->bmdma_status(ap); 457 458 /* BMDMA controllers indicate host bus error by 459 * setting DMA_ERR bit and timing out. As it wasn't 460 * really a timeout event, adjust error mask and 461 * cancel frozen state. 462 */ 463 if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) { 464 qc->err_mask = AC_ERR_HOST_BUS; 465 thaw = 1; 466 } 467 468 ap->ops->bmdma_stop(qc); 469 } 470 471 ata_altstatus(ap); 472 ata_chk_status(ap); 473 ap->ops->irq_clear(ap); 474 475 spin_unlock_irqrestore(ap->lock, flags); 476 477 if (thaw) 478 ata_eh_thaw_port(ap); 479 480 /* PIO and DMA engines have been stopped, perform recovery */ 481 ata_do_eh(ap, prereset, softreset, hardreset, postreset); 482 } 483 484 /** 485 * ata_bmdma_error_handler - Stock error handler for BMDMA controller 486 * @ap: port to handle error for 487 * 488 * Stock error handler for BMDMA controller. 489 * 490 * LOCKING: 491 * Kernel thread context (may sleep) 492 */ 493 void ata_bmdma_error_handler(struct ata_port *ap) 494 { 495 ata_reset_fn_t hardreset; 496 497 hardreset = NULL; 498 if (sata_scr_valid(ap)) 499 hardreset = sata_std_hardreset; 500 501 ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset, 502 ata_std_postreset); 503 } 504 505 /** 506 * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for 507 * BMDMA controller 508 * @qc: internal command to clean up 509 * 510 * LOCKING: 511 * Kernel thread context (may sleep) 512 */ 513 void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) 514 { 515 if (qc->ap->ioaddr.bmdma_addr) 516 ata_bmdma_stop(qc); 517 } 518 519 #ifdef CONFIG_PCI 520 521 static int ata_resources_present(struct pci_dev *pdev, int port) 522 { 523 int i; 524 525 /* Check the PCI resources for this channel are enabled */ 526 port = port * 2; 527 for (i = 0; i < 2; i ++) { 528 if (pci_resource_start(pdev, port + i) == 0 || 529 pci_resource_len(pdev, port + i) == 0) 530 return 0; 531 } 532 return 1; 533 } 534 535 /** 536 * ata_pci_init_bmdma - acquire PCI BMDMA resources and init ATA host 537 * @host: target ATA host 538 * 539 * Acquire PCI BMDMA resources and initialize @host accordingly. 540 * 541 * LOCKING: 542 * Inherited from calling layer (may sleep). 543 * 544 * RETURNS: 545 * 0 on success, -errno otherwise. 546 */ 547 static int ata_pci_init_bmdma(struct ata_host *host) 548 { 549 struct device *gdev = host->dev; 550 struct pci_dev *pdev = to_pci_dev(gdev); 551 int i, rc; 552 553 /* TODO: If we get no DMA mask we should fall back to PIO */ 554 rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); 555 if (rc) 556 return rc; 557 rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); 558 if (rc) 559 return rc; 560 561 /* request and iomap DMA region */ 562 rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME); 563 if (rc) { 564 dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n"); 565 return -ENOMEM; 566 } 567 host->iomap = pcim_iomap_table(pdev); 568 569 for (i = 0; i < host->n_ports; i++) { 570 struct ata_port *ap = host->ports[i]; 571 void __iomem *bmdma = host->iomap[4] + 8 * i; 572 573 if (ata_port_is_dummy(ap)) 574 continue; 575 576 ap->ioaddr.bmdma_addr = bmdma; 577 if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) && 578 (ioread8(bmdma + 2) & 0x80)) 579 host->flags |= ATA_HOST_SIMPLEX; 580 } 581 582 return 0; 583 } 584 585 /** 586 * ata_pci_init_native_host - acquire native ATA resources and init host 587 * @host: target ATA host 588 * @port_mask: ports to consider 589 * 590 * Acquire native PCI ATA resources for @host and initialize 591 * @host accordoingly. 592 * 593 * LOCKING: 594 * Inherited from calling layer (may sleep). 595 * 596 * RETURNS: 597 * 0 on success, -errno otherwise. 598 */ 599 int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask) 600 { 601 struct device *gdev = host->dev; 602 struct pci_dev *pdev = to_pci_dev(gdev); 603 int i, rc; 604 605 /* Discard disabled ports. Some controllers show their unused 606 * channels this way. Disabled ports are made dummy. 607 */ 608 for (i = 0; i < 2; i++) { 609 if ((port_mask & (1 << i)) && !ata_resources_present(pdev, i)) { 610 host->ports[i]->ops = &ata_dummy_port_ops; 611 port_mask &= ~(1 << i); 612 } 613 } 614 615 if (!port_mask) { 616 dev_printk(KERN_ERR, gdev, "no available port\n"); 617 return -ENODEV; 618 } 619 620 /* request, iomap BARs and init port addresses accordingly */ 621 for (i = 0; i < 2; i++) { 622 struct ata_port *ap = host->ports[i]; 623 int base = i * 2; 624 void __iomem * const *iomap; 625 626 if (!(port_mask & (1 << i))) 627 continue; 628 629 rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME); 630 if (rc) { 631 dev_printk(KERN_ERR, gdev, "failed to request/iomap " 632 "BARs for port %d (errno=%d)\n", i, rc); 633 if (rc == -EBUSY) 634 pcim_pin_device(pdev); 635 return rc; 636 } 637 host->iomap = iomap = pcim_iomap_table(pdev); 638 639 ap->ioaddr.cmd_addr = iomap[base]; 640 ap->ioaddr.altstatus_addr = 641 ap->ioaddr.ctl_addr = (void __iomem *) 642 ((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS); 643 ata_std_ports(&ap->ioaddr); 644 } 645 646 return 0; 647 } 648 649 /** 650 * ata_pci_prepare_native_host - helper to prepare native PCI ATA host 651 * @pdev: target PCI device 652 * @ppi: array of port_info 653 * @n_ports: number of ports to allocate 654 * @r_host: out argument for the initialized ATA host 655 * 656 * Helper to allocate ATA host for @pdev, acquire all native PCI 657 * resources and initialize it accordingly in one go. 658 * 659 * LOCKING: 660 * Inherited from calling layer (may sleep). 661 * 662 * RETURNS: 663 * 0 on success, -errno otherwise. 664 */ 665 int ata_pci_prepare_native_host(struct pci_dev *pdev, 666 const struct ata_port_info * const * ppi, 667 int n_ports, struct ata_host **r_host) 668 { 669 struct ata_host *host; 670 unsigned int port_mask; 671 int rc; 672 673 if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) 674 return -ENOMEM; 675 676 host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2); 677 if (!host) { 678 dev_printk(KERN_ERR, &pdev->dev, 679 "failed to allocate ATA host\n"); 680 rc = -ENOMEM; 681 goto err_out; 682 } 683 684 port_mask = ATA_PORT_PRIMARY; 685 if (n_ports > 1) 686 port_mask |= ATA_PORT_SECONDARY; 687 688 rc = ata_pci_init_native_host(host, port_mask); 689 if (rc) 690 goto err_out; 691 692 /* init DMA related stuff */ 693 rc = ata_pci_init_bmdma(host); 694 if (rc) 695 goto err_bmdma; 696 697 devres_remove_group(&pdev->dev, NULL); 698 *r_host = host; 699 return 0; 700 701 err_bmdma: 702 /* This is necessary because PCI and iomap resources are 703 * merged and releasing the top group won't release the 704 * acquired resources if some of those have been acquired 705 * before entering this function. 706 */ 707 pcim_iounmap_regions(pdev, 0xf); 708 err_out: 709 devres_release_group(&pdev->dev, NULL); 710 return rc; 711 } 712 713 struct ata_legacy_devres { 714 unsigned int mask; 715 unsigned long cmd_port[2]; 716 void __iomem * cmd_addr[2]; 717 void __iomem * ctl_addr[2]; 718 unsigned int irq[2]; 719 void * irq_dev_id[2]; 720 }; 721 722 static void ata_legacy_free_irqs(struct ata_legacy_devres *legacy_dr) 723 { 724 int i; 725 726 for (i = 0; i < 2; i++) { 727 if (!legacy_dr->irq[i]) 728 continue; 729 730 free_irq(legacy_dr->irq[i], legacy_dr->irq_dev_id[i]); 731 legacy_dr->irq[i] = 0; 732 legacy_dr->irq_dev_id[i] = NULL; 733 } 734 } 735 736 static void ata_legacy_release(struct device *gdev, void *res) 737 { 738 struct ata_legacy_devres *this = res; 739 int i; 740 741 ata_legacy_free_irqs(this); 742 743 for (i = 0; i < 2; i++) { 744 if (this->cmd_addr[i]) 745 ioport_unmap(this->cmd_addr[i]); 746 if (this->ctl_addr[i]) 747 ioport_unmap(this->ctl_addr[i]); 748 if (this->cmd_port[i]) 749 release_region(this->cmd_port[i], 8); 750 } 751 } 752 753 static int ata_init_legacy_port(struct ata_port *ap, 754 struct ata_legacy_devres *legacy_dr) 755 { 756 struct ata_host *host = ap->host; 757 int port_no = ap->port_no; 758 unsigned long cmd_port, ctl_port; 759 760 if (port_no == 0) { 761 cmd_port = ATA_PRIMARY_CMD; 762 ctl_port = ATA_PRIMARY_CTL; 763 } else { 764 cmd_port = ATA_SECONDARY_CMD; 765 ctl_port = ATA_SECONDARY_CTL; 766 } 767 768 /* request cmd_port */ 769 if (request_region(cmd_port, 8, "libata")) 770 legacy_dr->cmd_port[port_no] = cmd_port; 771 else { 772 dev_printk(KERN_WARNING, host->dev, 773 "0x%0lX IDE port busy\n", cmd_port); 774 return -EBUSY; 775 } 776 777 /* iomap cmd and ctl ports */ 778 legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8); 779 legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1); 780 if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no]) 781 return -ENOMEM; 782 783 /* init IO addresses */ 784 ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no]; 785 ap->ioaddr.altstatus_addr = legacy_dr->ctl_addr[port_no]; 786 ap->ioaddr.ctl_addr = legacy_dr->ctl_addr[port_no]; 787 ata_std_ports(&ap->ioaddr); 788 789 return 0; 790 } 791 792 /** 793 * ata_init_legacy_host - acquire legacy ATA resources and init ATA host 794 * @host: target ATA host 795 * @legacy_mask: out parameter, mask indicating ports is in legacy mode 796 * @was_busy: out parameter, indicates whether any port was busy 797 * 798 * Acquire legacy ATA resources for ports. 799 * 800 * LOCKING: 801 * Inherited from calling layer (may sleep). 802 * 803 * RETURNS: 804 * 0 on success, -errno otherwise. 805 */ 806 static int ata_init_legacy_host(struct ata_host *host, 807 unsigned int *legacy_mask, int *was_busy) 808 { 809 struct device *gdev = host->dev; 810 struct ata_legacy_devres *legacy_dr; 811 int i, rc; 812 813 if (!devres_open_group(gdev, NULL, GFP_KERNEL)) 814 return -ENOMEM; 815 816 rc = -ENOMEM; 817 legacy_dr = devres_alloc(ata_legacy_release, sizeof(*legacy_dr), 818 GFP_KERNEL); 819 if (!legacy_dr) 820 goto err_out; 821 devres_add(gdev, legacy_dr); 822 823 for (i = 0; i < 2; i++) { 824 *legacy_mask &= ~(1 << i); 825 rc = ata_init_legacy_port(host->ports[i], legacy_dr); 826 if (rc == 0) 827 legacy_dr->mask |= 1 << i; 828 else if (rc == -EBUSY) 829 (*was_busy)++; 830 } 831 832 if (!legacy_dr->mask) 833 return -EBUSY; 834 835 for (i = 0; i < 2; i++) 836 if (!(legacy_dr->mask & (1 << i))) 837 host->ports[i]->ops = &ata_dummy_port_ops; 838 839 *legacy_mask |= legacy_dr->mask; 840 841 devres_remove_group(gdev, NULL); 842 return 0; 843 844 err_out: 845 devres_release_group(gdev, NULL); 846 return rc; 847 } 848 849 /** 850 * ata_request_legacy_irqs - request legacy ATA IRQs 851 * @host: target ATA host 852 * @handler: array of IRQ handlers 853 * @irq_flags: array of IRQ flags 854 * @dev_id: array of IRQ dev_ids 855 * 856 * Request legacy IRQs for non-dummy legacy ports in @host. All 857 * IRQ parameters are passed as array to allow ports to have 858 * separate IRQ handlers. 859 * 860 * LOCKING: 861 * Inherited from calling layer (may sleep). 862 * 863 * RETURNS: 864 * 0 on success, -errno otherwise. 865 */ 866 static int ata_request_legacy_irqs(struct ata_host *host, 867 irq_handler_t const *handler, 868 const unsigned int *irq_flags, 869 void * const *dev_id) 870 { 871 struct device *gdev = host->dev; 872 struct ata_legacy_devres *legacy_dr; 873 int i, rc; 874 875 legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL); 876 BUG_ON(!legacy_dr); 877 878 for (i = 0; i < host->n_ports; i++) { 879 unsigned int irq; 880 881 /* FIXME: ATA_*_IRQ() should take generic device not pci_dev */ 882 if (i == 0) 883 irq = ATA_PRIMARY_IRQ(to_pci_dev(gdev)); 884 else 885 irq = ATA_SECONDARY_IRQ(to_pci_dev(gdev)); 886 887 if (!(legacy_dr->mask & (1 << i))) 888 continue; 889 890 if (!handler[i]) { 891 dev_printk(KERN_ERR, gdev, 892 "NULL handler specified for port %d\n", i); 893 rc = -EINVAL; 894 goto err_out; 895 } 896 897 rc = request_irq(irq, handler[i], irq_flags[i], DRV_NAME, 898 dev_id[i]); 899 if (rc) { 900 dev_printk(KERN_ERR, gdev, 901 "irq %u request failed (errno=%d)\n", irq, rc); 902 goto err_out; 903 } 904 905 /* record irq allocation in legacy_dr */ 906 legacy_dr->irq[i] = irq; 907 legacy_dr->irq_dev_id[i] = dev_id[i]; 908 909 /* only used to print info */ 910 if (i == 0) 911 host->irq = irq; 912 else 913 host->irq2 = irq; 914 } 915 916 return 0; 917 918 err_out: 919 ata_legacy_free_irqs(legacy_dr); 920 return rc; 921 } 922 923 /** 924 * ata_pci_init_one - Initialize/register PCI IDE host controller 925 * @pdev: Controller to be initialized 926 * @port_info: Information from low-level host driver 927 * @n_ports: Number of ports attached to host controller 928 * 929 * This is a helper function which can be called from a driver's 930 * xxx_init_one() probe function if the hardware uses traditional 931 * IDE taskfile registers. 932 * 933 * This function calls pci_enable_device(), reserves its register 934 * regions, sets the dma mask, enables bus master mode, and calls 935 * ata_device_add() 936 * 937 * ASSUMPTION: 938 * Nobody makes a single channel controller that appears solely as 939 * the secondary legacy port on PCI. 940 * 941 * LOCKING: 942 * Inherited from PCI layer (may sleep). 943 * 944 * RETURNS: 945 * Zero on success, negative on errno-based value on error. 946 */ 947 948 int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, 949 unsigned int n_ports) 950 { 951 struct device *dev = &pdev->dev; 952 struct ata_host *host = NULL; 953 const struct ata_port_info *port[2]; 954 u8 mask; 955 unsigned int legacy_mode = 0; 956 int rc; 957 958 DPRINTK("ENTER\n"); 959 960 if (!devres_open_group(dev, NULL, GFP_KERNEL)) 961 return -ENOMEM; 962 963 BUG_ON(n_ports < 1 || n_ports > 2); 964 965 port[0] = port_info[0]; 966 port[1] = (n_ports > 1) ? port_info[1] : NULL; 967 968 /* FIXME: Really for ATA it isn't safe because the device may be 969 multi-purpose and we want to leave it alone if it was already 970 enabled. Secondly for shared use as Arjan says we want refcounting 971 972 Checking dev->is_enabled is insufficient as this is not set at 973 boot for the primary video which is BIOS enabled 974 */ 975 976 rc = pcim_enable_device(pdev); 977 if (rc) 978 goto err_out; 979 980 if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { 981 u8 tmp8; 982 983 /* TODO: What if one channel is in native mode ... */ 984 pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); 985 mask = (1 << 2) | (1 << 0); 986 if ((tmp8 & mask) != mask) 987 legacy_mode = (1 << 3); 988 #if defined(CONFIG_NO_ATA_LEGACY) 989 /* Some platforms with PCI limits cannot address compat 990 port space. In that case we punt if their firmware has 991 left a device in compatibility mode */ 992 if (legacy_mode) { 993 printk(KERN_ERR "ata: Compatibility mode ATA is not supported on this platform, skipping.\n"); 994 rc = -EOPNOTSUPP; 995 goto err_out; 996 } 997 #endif 998 } 999 1000 /* alloc and init host */ 1001 host = ata_host_alloc_pinfo(dev, port, n_ports); 1002 if (!host) { 1003 dev_printk(KERN_ERR, &pdev->dev, 1004 "failed to allocate ATA host\n"); 1005 rc = -ENOMEM; 1006 goto err_out; 1007 } 1008 1009 if (!legacy_mode) { 1010 unsigned int port_mask; 1011 1012 port_mask = ATA_PORT_PRIMARY; 1013 if (n_ports > 1) 1014 port_mask |= ATA_PORT_SECONDARY; 1015 1016 rc = ata_pci_init_native_host(host, port_mask); 1017 if (rc) 1018 goto err_out; 1019 } else { 1020 int was_busy = 0; 1021 1022 rc = ata_init_legacy_host(host, &legacy_mode, &was_busy); 1023 if (was_busy) 1024 pcim_pin_device(pdev); 1025 if (rc) 1026 goto err_out; 1027 1028 /* request respective PCI regions, may fail */ 1029 rc = pci_request_region(pdev, 1, DRV_NAME); 1030 rc = pci_request_region(pdev, 3, DRV_NAME); 1031 } 1032 1033 /* init BMDMA, may fail */ 1034 ata_pci_init_bmdma(host); 1035 pci_set_master(pdev); 1036 1037 /* start host and request IRQ */ 1038 rc = ata_host_start(host); 1039 if (rc) 1040 goto err_out; 1041 1042 if (!legacy_mode) 1043 rc = devm_request_irq(dev, pdev->irq, 1044 port_info[0]->port_ops->irq_handler, 1045 IRQF_SHARED, DRV_NAME, host); 1046 else { 1047 irq_handler_t handler[2] = { host->ops->irq_handler, 1048 host->ops->irq_handler }; 1049 unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED }; 1050 void *dev_id[2] = { host, host }; 1051 1052 rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id); 1053 } 1054 if (rc) 1055 goto err_out; 1056 1057 /* register */ 1058 rc = ata_host_register(host, port_info[0]->sht); 1059 if (rc) 1060 goto err_out; 1061 1062 devres_remove_group(dev, NULL); 1063 return 0; 1064 1065 err_out: 1066 devres_release_group(dev, NULL); 1067 return rc; 1068 } 1069 1070 /** 1071 * ata_pci_clear_simplex - attempt to kick device out of simplex 1072 * @pdev: PCI device 1073 * 1074 * Some PCI ATA devices report simplex mode but in fact can be told to 1075 * enter non simplex mode. This implements the neccessary logic to 1076 * perform the task on such devices. Calling it on other devices will 1077 * have -undefined- behaviour. 1078 */ 1079 1080 int ata_pci_clear_simplex(struct pci_dev *pdev) 1081 { 1082 unsigned long bmdma = pci_resource_start(pdev, 4); 1083 u8 simplex; 1084 1085 if (bmdma == 0) 1086 return -ENOENT; 1087 1088 simplex = inb(bmdma + 0x02); 1089 outb(simplex & 0x60, bmdma + 0x02); 1090 simplex = inb(bmdma + 0x02); 1091 if (simplex & 0x80) 1092 return -EOPNOTSUPP; 1093 return 0; 1094 } 1095 1096 unsigned long ata_pci_default_filter(struct ata_device *adev, unsigned long xfer_mask) 1097 { 1098 /* Filter out DMA modes if the device has been configured by 1099 the BIOS as PIO only */ 1100 1101 if (adev->ap->ioaddr.bmdma_addr == 0) 1102 xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); 1103 return xfer_mask; 1104 } 1105 1106 #endif /* CONFIG_PCI */ 1107 1108