1 /* 2 * DaVinci DM816 AHCI SATA platform driver 3 * 4 * Copyright (C) 2017 BayLibre SAS 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2, or (at your option) 9 * any later version. 10 */ 11 12 #include <linux/kernel.h> 13 #include <linux/module.h> 14 #include <linux/device.h> 15 #include <linux/pm.h> 16 #include <linux/platform_device.h> 17 #include <linux/libata.h> 18 #include <linux/ahci_platform.h> 19 20 #include "ahci.h" 21 22 #define AHCI_DM816_DRV_NAME "ahci-dm816" 23 24 #define AHCI_DM816_PHY_ENPLL(x) ((x) << 0) 25 #define AHCI_DM816_PHY_MPY(x) ((x) << 1) 26 #define AHCI_DM816_PHY_LOS(x) ((x) << 12) 27 #define AHCI_DM816_PHY_RXCDR(x) ((x) << 13) 28 #define AHCI_DM816_PHY_RXEQ(x) ((x) << 16) 29 #define AHCI_DM816_PHY_TXSWING(x) ((x) << 23) 30 31 #define AHCI_DM816_P0PHYCR_REG 0x178 32 #define AHCI_DM816_P1PHYCR_REG 0x1f8 33 34 #define AHCI_DM816_PLL_OUT 1500000000LU 35 36 static const unsigned long pll_mpy_table[] = { 37 400, 500, 600, 800, 825, 1000, 1200, 38 1250, 1500, 1600, 1650, 2000, 2200, 2500 39 }; 40 41 static int ahci_dm816_get_mpy_bits(unsigned long refclk_rate) 42 { 43 unsigned long pll_multiplier; 44 int i; 45 46 /* 47 * We need to determine the value of the multiplier (MPY) bits. 48 * In order to include the 8.25 multiplier we need to first divide 49 * the refclk rate by 100. 50 */ 51 pll_multiplier = AHCI_DM816_PLL_OUT / (refclk_rate / 100); 52 53 for (i = 0; i < ARRAY_SIZE(pll_mpy_table); i++) { 54 if (pll_mpy_table[i] == pll_multiplier) 55 return i; 56 } 57 58 /* 59 * We should have divided evenly - if not, return an invalid 60 * value. 61 */ 62 return -1; 63 } 64 65 static int ahci_dm816_phy_init(struct ahci_host_priv *hpriv, struct device *dev) 66 { 67 unsigned long refclk_rate; 68 int mpy; 69 u32 val; 70 71 /* 72 * We should have been supplied two clocks: the functional and 73 * keep-alive clock and the external reference clock. We need the 74 * rate of the latter to calculate the correct value of MPY bits. 75 */ 76 if (!hpriv->clks[1]) { 77 dev_err(dev, "reference clock not supplied\n"); 78 return -EINVAL; 79 } 80 81 refclk_rate = clk_get_rate(hpriv->clks[1]); 82 if ((refclk_rate % 100) != 0) { 83 dev_err(dev, "reference clock rate must be divisible by 100\n"); 84 return -EINVAL; 85 } 86 87 mpy = ahci_dm816_get_mpy_bits(refclk_rate); 88 if (mpy < 0) { 89 dev_err(dev, "can't calculate the MPY bits value\n"); 90 return -EINVAL; 91 } 92 93 /* Enable the PHY and configure the first HBA port. */ 94 val = AHCI_DM816_PHY_MPY(mpy) | AHCI_DM816_PHY_LOS(1) | 95 AHCI_DM816_PHY_RXCDR(4) | AHCI_DM816_PHY_RXEQ(1) | 96 AHCI_DM816_PHY_TXSWING(3) | AHCI_DM816_PHY_ENPLL(1); 97 writel(val, hpriv->mmio + AHCI_DM816_P0PHYCR_REG); 98 99 /* Configure the second HBA port. */ 100 val = AHCI_DM816_PHY_LOS(1) | AHCI_DM816_PHY_RXCDR(4) | 101 AHCI_DM816_PHY_RXEQ(1) | AHCI_DM816_PHY_TXSWING(3); 102 writel(val, hpriv->mmio + AHCI_DM816_P1PHYCR_REG); 103 104 return 0; 105 } 106 107 static int ahci_dm816_softreset(struct ata_link *link, 108 unsigned int *class, unsigned long deadline) 109 { 110 int pmp, ret; 111 112 pmp = sata_srst_pmp(link); 113 114 /* 115 * There's an issue with the SATA controller on DM816 SoC: if we 116 * enable Port Multiplier support, but the drive is connected directly 117 * to the board, it can't be detected. As a workaround: if PMP is 118 * enabled, we first call ahci_do_softreset() and pass it the result of 119 * sata_srst_pmp(). If this call fails, we retry with pmp = 0. 120 */ 121 ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); 122 if (pmp && ret == -EBUSY) 123 return ahci_do_softreset(link, class, 0, 124 deadline, ahci_check_ready); 125 126 return ret; 127 } 128 129 static struct ata_port_operations ahci_dm816_port_ops = { 130 .inherits = &ahci_platform_ops, 131 .softreset = ahci_dm816_softreset, 132 }; 133 134 static const struct ata_port_info ahci_dm816_port_info = { 135 .flags = AHCI_FLAG_COMMON, 136 .pio_mask = ATA_PIO4, 137 .udma_mask = ATA_UDMA6, 138 .port_ops = &ahci_dm816_port_ops, 139 }; 140 141 static struct scsi_host_template ahci_dm816_platform_sht = { 142 AHCI_SHT(AHCI_DM816_DRV_NAME), 143 }; 144 145 static int ahci_dm816_probe(struct platform_device *pdev) 146 { 147 struct device *dev = &pdev->dev; 148 struct ahci_host_priv *hpriv; 149 int rc; 150 151 hpriv = ahci_platform_get_resources(pdev); 152 if (IS_ERR(hpriv)) 153 return PTR_ERR(hpriv); 154 155 rc = ahci_platform_enable_resources(hpriv); 156 if (rc) 157 return rc; 158 159 rc = ahci_dm816_phy_init(hpriv, dev); 160 if (rc) 161 goto disable_resources; 162 163 rc = ahci_platform_init_host(pdev, hpriv, 164 &ahci_dm816_port_info, 165 &ahci_dm816_platform_sht); 166 if (rc) 167 goto disable_resources; 168 169 return 0; 170 171 disable_resources: 172 ahci_platform_disable_resources(hpriv); 173 174 return rc; 175 } 176 177 static SIMPLE_DEV_PM_OPS(ahci_dm816_pm_ops, 178 ahci_platform_suspend, 179 ahci_platform_resume); 180 181 static const struct of_device_id ahci_dm816_of_match[] = { 182 { .compatible = "ti,dm816-ahci", }, 183 { }, 184 }; 185 MODULE_DEVICE_TABLE(of, ahci_dm816_of_match); 186 187 static struct platform_driver ahci_dm816_driver = { 188 .probe = ahci_dm816_probe, 189 .remove = ata_platform_remove_one, 190 .driver = { 191 .name = AHCI_DM816_DRV_NAME, 192 .of_match_table = ahci_dm816_of_match, 193 .pm = &ahci_dm816_pm_ops, 194 }, 195 }; 196 module_platform_driver(ahci_dm816_driver); 197 198 MODULE_DESCRIPTION("DaVinci DM816 AHCI SATA platform driver"); 199 MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); 200 MODULE_LICENSE("GPL"); 201