1# SPDX-License-Identifier: GPL-2.0 2# 3# SATA/PATA driver configuration 4# 5 6config HAVE_PATA_PLATFORM 7 bool 8 help 9 This is an internal configuration node for any machine that 10 uses pata-platform driver to enable the relevant driver in the 11 configuration structure without having to submit endless patches 12 to update the PATA_PLATFORM entry. 13 14menuconfig ATA 15 tristate "Serial ATA and Parallel ATA drivers (libata)" 16 depends on HAS_IOMEM 17 depends on BLOCK 18 select SCSI 19 select GLOB 20 ---help--- 21 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or 22 any other ATA device under Linux, say Y and make sure that you know 23 the name of your ATA host adapter (the card inside your computer 24 that "speaks" the ATA protocol, also called ATA controller), 25 because you will be asked for it. 26 27 NOTE: ATA enables basic SCSI support; *however*, 28 'SCSI disk support', 'SCSI tape support', or 29 'SCSI CDROM support' may also be needed, 30 depending on your hardware configuration. 31 32if ATA 33 34config ATA_NONSTANDARD 35 bool 36 default n 37 38config ATA_VERBOSE_ERROR 39 bool "Verbose ATA error reporting" 40 default y 41 help 42 This option adds parsing of ATA command descriptions and error bits 43 in libata kernel output, making it easier to interpret. 44 This option will enlarge the kernel by approx. 6KB. Disable it only 45 if kernel size is more important than ease of debugging. 46 47 If unsure, say Y. 48 49config ATA_ACPI 50 bool "ATA ACPI Support" 51 depends on ACPI 52 default y 53 help 54 This option adds support for ATA-related ACPI objects. 55 These ACPI objects add the ability to retrieve taskfiles 56 from the ACPI BIOS and write them to the disk controller. 57 These objects may be related to performance, security, 58 power management, or other areas. 59 You can disable this at kernel boot time by using the 60 option libata.noacpi=1 61 62config SATA_ZPODD 63 bool "SATA Zero Power Optical Disc Drive (ZPODD) support" 64 depends on ATA_ACPI && PM 65 default n 66 help 67 This option adds support for SATA Zero Power Optical Disc 68 Drive (ZPODD). It requires both the ODD and the platform 69 support, and if enabled, will automatically power on/off the 70 ODD when certain condition is satisfied. This does not impact 71 end user's experience of the ODD, only power is saved when 72 the ODD is not in use (i.e. no disc inside). 73 74 If unsure, say N. 75 76config SATA_PMP 77 bool "SATA Port Multiplier support" 78 default y 79 help 80 This option adds support for SATA Port Multipliers 81 (the SATA version of an ethernet hub, or SAS expander). 82 83if HAS_DMA 84 85comment "Controllers with non-SFF native interface" 86 87config SATA_AHCI 88 tristate "AHCI SATA support" 89 depends on PCI 90 help 91 This option enables support for AHCI Serial ATA. 92 93 If unsure, say N. 94 95config SATA_AHCI_PLATFORM 96 tristate "Platform AHCI SATA support" 97 help 98 This option enables support for Platform AHCI Serial ATA 99 controllers. 100 101 If unsure, say N. 102 103config AHCI_BRCM 104 tristate "Broadcom AHCI SATA support" 105 depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP 106 help 107 This option enables support for the AHCI SATA3 controller found on 108 Broadcom SoC's. 109 110 If unsure, say N. 111 112config AHCI_DA850 113 tristate "DaVinci DA850 AHCI SATA support" 114 depends on ARCH_DAVINCI_DA850 115 help 116 This option enables support for the DaVinci DA850 SoC's 117 onboard AHCI SATA. 118 119 If unsure, say N. 120 121config AHCI_DM816 122 tristate "DaVinci DM816 AHCI SATA support" 123 depends on ARCH_OMAP2PLUS 124 help 125 This option enables support for the DaVinci DM816 SoC's 126 onboard AHCI SATA controller. 127 128 If unsure, say N. 129 130config AHCI_ST 131 tristate "ST AHCI SATA support" 132 depends on ARCH_STI 133 help 134 This option enables support for ST AHCI SATA controller. 135 136 If unsure, say N. 137 138config AHCI_IMX 139 tristate "Freescale i.MX AHCI SATA support" 140 depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) 141 depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON 142 help 143 This option enables support for the Freescale i.MX SoC's 144 onboard AHCI SATA. 145 146 If unsure, say N. 147 148config AHCI_CEVA 149 tristate "CEVA AHCI SATA support" 150 depends on OF 151 help 152 This option enables support for the CEVA AHCI SATA. 153 It can be found on the Xilinx Zynq UltraScale+ MPSoC. 154 155 If unsure, say N. 156 157config AHCI_MTK 158 tristate "MediaTek AHCI SATA support" 159 depends on ARCH_MEDIATEK 160 select MFD_SYSCON 161 help 162 This option enables support for the MediaTek SoC's 163 onboard AHCI SATA controller. 164 165 If unsure, say N. 166 167config AHCI_MVEBU 168 tristate "Marvell EBU AHCI SATA support" 169 depends on ARCH_MVEBU 170 help 171 This option enables support for the Marvebu EBU SoC's 172 onboard AHCI SATA. 173 174 If unsure, say N. 175 176config AHCI_OCTEON 177 tristate "Cavium Octeon Soc Serial ATA" 178 depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC 179 default y 180 help 181 This option enables support for Cavium Octeon SoC Serial ATA. 182 183 If unsure, say N. 184 185config AHCI_SUNXI 186 tristate "Allwinner sunxi AHCI SATA support" 187 depends on ARCH_SUNXI 188 help 189 This option enables support for the Allwinner sunxi SoC's 190 onboard AHCI SATA. 191 192 If unsure, say N. 193 194config AHCI_TEGRA 195 tristate "NVIDIA Tegra124 AHCI SATA support" 196 depends on ARCH_TEGRA 197 help 198 This option enables support for the NVIDIA Tegra124 SoC's 199 onboard AHCI SATA. 200 201 If unsure, say N. 202 203config AHCI_XGENE 204 tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" 205 depends on PHY_XGENE 206 help 207 This option enables support for APM X-Gene SoC SATA host controller. 208 209config AHCI_QORIQ 210 tristate "Freescale QorIQ AHCI SATA support" 211 depends on OF 212 help 213 This option enables support for the Freescale QorIQ AHCI SoC's 214 onboard AHCI SATA. 215 216 If unsure, say N. 217 218config SATA_FSL 219 tristate "Freescale 3.0Gbps SATA support" 220 depends on FSL_SOC 221 help 222 This option enables support for Freescale 3.0Gbps SATA controller. 223 It can be found on MPC837x and MPC8315. 224 225 If unsure, say N. 226 227config SATA_GEMINI 228 tristate "Gemini SATA bridge support" 229 depends on ARCH_GEMINI || COMPILE_TEST 230 default ARCH_GEMINI 231 help 232 This enabled support for the FTIDE010 to SATA bridge 233 found in Cortina Systems Gemini platform. 234 235 If unsure, say N. 236 237config SATA_AHCI_SEATTLE 238 tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" 239 depends on ARCH_SEATTLE 240 help 241 This option enables support for AMD Seattle SATA host controller. 242 243 If unsure, say N 244 245config SATA_INIC162X 246 tristate "Initio 162x SATA support (Very Experimental)" 247 depends on PCI 248 help 249 This option enables support for Initio 162x Serial ATA. 250 251config SATA_ACARD_AHCI 252 tristate "ACard AHCI variant (ATP 8620)" 253 depends on PCI 254 help 255 This option enables support for Acard. 256 257 If unsure, say N. 258 259config SATA_SIL24 260 tristate "Silicon Image 3124/3132 SATA support" 261 depends on PCI 262 help 263 This option enables support for Silicon Image 3124/3132 Serial ATA. 264 265 If unsure, say N. 266 267endif # HAS_DMA 268 269config ATA_SFF 270 bool "ATA SFF support (for legacy IDE and PATA)" 271 default y 272 help 273 This option adds support for ATA controllers with SFF 274 compliant or similar programming interface. 275 276 SFF is the legacy IDE interface that has been around since 277 the dawn of time. Almost all PATA controllers have an 278 SFF interface. Many SATA controllers have an SFF interface 279 when configured into a legacy compatibility mode. 280 281 For users with exclusively modern controllers like AHCI, 282 Silicon Image 3124, or Marvell 6440, you may choose to 283 disable this unneeded SFF support. 284 285 If unsure, say Y. 286 287if ATA_SFF 288 289comment "SFF controllers with custom DMA interface" 290 291config PDC_ADMA 292 tristate "Pacific Digital ADMA support" 293 depends on PCI 294 help 295 This option enables support for Pacific Digital ADMA controllers 296 297 If unsure, say N. 298 299config PATA_OCTEON_CF 300 tristate "OCTEON Boot Bus Compact Flash support" 301 depends on CAVIUM_OCTEON_SOC 302 help 303 This option enables a polled compact flash driver for use with 304 compact flash cards attached to the OCTEON boot bus. 305 306 If unsure, say N. 307 308config SATA_QSTOR 309 tristate "Pacific Digital SATA QStor support" 310 depends on PCI 311 help 312 This option enables support for Pacific Digital Serial ATA QStor. 313 314 If unsure, say N. 315 316config SATA_SX4 317 tristate "Promise SATA SX4 support (Experimental)" 318 depends on PCI 319 help 320 This option enables support for Promise Serial ATA SX4. 321 322 If unsure, say N. 323 324config ATA_BMDMA 325 bool "ATA BMDMA support" 326 depends on HAS_DMA 327 default y 328 help 329 This option adds support for SFF ATA controllers with BMDMA 330 capability. BMDMA stands for bus-master DMA and is the 331 de facto DMA interface for SFF controllers. 332 333 If unsure, say Y. 334 335if ATA_BMDMA 336 337comment "SATA SFF controllers with BMDMA" 338 339config ATA_PIIX 340 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" 341 depends on PCI 342 help 343 This option enables support for ICH5/6/7/8 Serial ATA 344 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series 345 host controllers. 346 347 If unsure, say N. 348 349config SATA_DWC 350 tristate "DesignWare Cores SATA support" 351 depends on DMADEVICES 352 select GENERIC_PHY 353 help 354 This option enables support for the on-chip SATA controller of the 355 AppliedMicro processor 460EX. 356 357 If unsure, say N. 358 359config SATA_DWC_OLD_DMA 360 bool "Support old device trees" 361 depends on SATA_DWC 362 select DW_DMAC_CORE 363 default y if 460EX 364 help 365 This option enables support for old device trees without the 366 "dmas" property. 367 368config SATA_DWC_DEBUG 369 bool "Debugging driver version" 370 depends on SATA_DWC 371 help 372 This option enables debugging output in the driver. 373 374config SATA_DWC_VDEBUG 375 bool "Verbose debug output" 376 depends on SATA_DWC_DEBUG 377 help 378 This option enables the taskfile dumping and NCQ debugging. 379 380config SATA_HIGHBANK 381 tristate "Calxeda Highbank SATA support" 382 depends on HAS_DMA 383 depends on ARCH_HIGHBANK || COMPILE_TEST 384 help 385 This option enables support for the Calxeda Highbank SoC's 386 onboard SATA. 387 388 If unsure, say N. 389 390config SATA_MV 391 tristate "Marvell SATA support" 392 depends on HAS_DMA 393 depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ 394 ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST 395 select GENERIC_PHY 396 help 397 This option enables support for the Marvell Serial ATA family. 398 Currently supports 88SX[56]0[48][01] PCI(-X) chips, 399 as well as the newer [67]042 PCI-X/PCIe and SOC devices. 400 401 If unsure, say N. 402 403config SATA_NV 404 tristate "NVIDIA SATA support" 405 depends on PCI 406 help 407 This option enables support for NVIDIA Serial ATA. 408 409 If unsure, say N. 410 411config SATA_PROMISE 412 tristate "Promise SATA TX2/TX4 support" 413 depends on PCI 414 help 415 This option enables support for Promise Serial ATA TX2/TX4. 416 417 If unsure, say N. 418 419config SATA_RCAR 420 tristate "Renesas R-Car SATA support" 421 depends on ARCH_RENESAS || COMPILE_TEST 422 help 423 This option enables support for Renesas R-Car Serial ATA. 424 425 If unsure, say N. 426 427config SATA_SIL 428 tristate "Silicon Image SATA support" 429 depends on PCI 430 help 431 This option enables support for Silicon Image Serial ATA. 432 433 If unsure, say N. 434 435config SATA_SIS 436 tristate "SiS 964/965/966/180 SATA support" 437 depends on PCI 438 select PATA_SIS 439 help 440 This option enables support for SiS Serial ATA on 441 SiS 964/965/966/180 and Parallel ATA on SiS 180. 442 The PATA support for SiS 180 requires additionally to 443 enable the PATA_SIS driver in the config. 444 If unsure, say N. 445 446config SATA_SVW 447 tristate "ServerWorks Frodo / Apple K2 SATA support" 448 depends on PCI 449 help 450 This option enables support for Broadcom/Serverworks/Apple K2 451 SATA support. 452 453 If unsure, say N. 454 455config SATA_ULI 456 tristate "ULi Electronics SATA support" 457 depends on PCI 458 help 459 This option enables support for ULi Electronics SATA. 460 461 If unsure, say N. 462 463config SATA_VIA 464 tristate "VIA SATA support" 465 depends on PCI 466 help 467 This option enables support for VIA Serial ATA. 468 469 If unsure, say N. 470 471config SATA_VITESSE 472 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" 473 depends on PCI 474 help 475 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. 476 477 If unsure, say N. 478 479comment "PATA SFF controllers with BMDMA" 480 481config PATA_ALI 482 tristate "ALi PATA support" 483 depends on PCI 484 help 485 This option enables support for the ALi ATA interfaces 486 found on the many ALi chipsets. 487 488 If unsure, say N. 489 490config PATA_AMD 491 tristate "AMD/NVidia PATA support" 492 depends on PCI 493 help 494 This option enables support for the AMD and NVidia PATA 495 interfaces found on the chipsets for Athlon/Athlon64. 496 497 If unsure, say N. 498 499config PATA_ARASAN_CF 500 tristate "ARASAN CompactFlash PATA Controller Support" 501 depends on ARCH_SPEAR13XX || COMPILE_TEST 502 depends on DMADEVICES 503 select DMA_ENGINE 504 help 505 Say Y here to support the ARASAN CompactFlash PATA controller 506 507config PATA_ARTOP 508 tristate "ARTOP 6210/6260 PATA support" 509 depends on PCI 510 help 511 This option enables support for ARTOP PATA controllers. 512 513 If unsure, say N. 514 515config PATA_ATIIXP 516 tristate "ATI PATA support" 517 depends on PCI 518 help 519 This option enables support for the ATI ATA interfaces 520 found on the many ATI chipsets. 521 522 If unsure, say N. 523 524config PATA_ATP867X 525 tristate "ARTOP/Acard ATP867X PATA support" 526 depends on PCI 527 help 528 This option enables support for ARTOP/Acard ATP867X PATA 529 controllers. 530 531 If unsure, say N. 532 533config PATA_BF54X 534 tristate "Blackfin 54x ATAPI support" 535 depends on BF542 || BF548 || BF549 536 help 537 This option enables support for the built-in ATAPI controller on 538 Blackfin 54x family chips. 539 540 If unsure, say N. 541 542config PATA_BK3710 543 tristate "Palmchip BK3710 PATA support" 544 depends on ARCH_DAVINCI 545 help 546 This option enables support for the integrated IDE controller on 547 the TI DaVinci SoC. 548 549 If unsure, say N. 550 551config PATA_CMD64X 552 tristate "CMD64x PATA support" 553 depends on PCI 554 help 555 This option enables support for the CMD64x series chips 556 except for the CMD640. 557 558 If unsure, say N. 559 560config PATA_CS5520 561 tristate "CS5510/5520 PATA support" 562 depends on PCI && (X86_32 || COMPILE_TEST) 563 help 564 This option enables support for the Cyrix 5510/5520 565 companion chip used with the MediaGX/Geode processor family. 566 567 If unsure, say N. 568 569config PATA_CS5530 570 tristate "CS5530 PATA support" 571 depends on PCI && (X86_32 || COMPILE_TEST) 572 help 573 This option enables support for the Cyrix/NatSemi/AMD CS5530 574 companion chip used with the MediaGX/Geode processor family. 575 576 If unsure, say N. 577 578config PATA_CS5535 579 tristate "CS5535 PATA support (Experimental)" 580 depends on PCI && X86_32 581 help 582 This option enables support for the NatSemi/AMD CS5535 583 companion chip used with the Geode processor family. 584 585 If unsure, say N. 586 587config PATA_CS5536 588 tristate "CS5536 PATA support" 589 depends on PCI && (X86_32 || MIPS || COMPILE_TEST) 590 help 591 This option enables support for the AMD CS5536 592 companion chip used with the Geode LX processor family. 593 594 If unsure, say N. 595 596config PATA_CYPRESS 597 tristate "Cypress CY82C693 PATA support (Very Experimental)" 598 depends on PCI 599 help 600 This option enables support for the Cypress/Contaq CY82C693 601 chipset found in some Alpha systems 602 603 If unsure, say N. 604 605config PATA_EFAR 606 tristate "EFAR SLC90E66 support" 607 depends on PCI 608 help 609 This option enables support for the EFAR SLC90E66 610 IDE controller found on some older machines. 611 612 If unsure, say N. 613 614config PATA_EP93XX 615 tristate "Cirrus Logic EP93xx PATA support" 616 depends on ARCH_EP93XX 617 help 618 This option enables support for the PATA controller in 619 the Cirrus Logic EP9312 and EP9315 ARM CPU. 620 621 If unsure, say N. 622 623config PATA_FTIDE010 624 tristate "Faraday Technology FTIDE010 PATA support" 625 depends on OF 626 depends on ARM 627 depends on SATA_GEMINI 628 help 629 This option enables support for the Faraday FTIDE010 630 PATA controller found in the Cortina Gemini SoCs. 631 632 If unsure, say N. 633 634config PATA_HPT366 635 tristate "HPT 366/368 PATA support" 636 depends on PCI 637 help 638 This option enables support for the HPT 366 and 368 639 PATA controllers via the new ATA layer. 640 641 If unsure, say N. 642 643config PATA_HPT37X 644 tristate "HPT 370/370A/371/372/374/302 PATA support" 645 depends on PCI 646 help 647 This option enables support for the majority of the later HPT 648 PATA controllers via the new ATA layer. 649 650 If unsure, say N. 651 652config PATA_HPT3X2N 653 tristate "HPT 371N/372N/302N PATA support" 654 depends on PCI 655 help 656 This option enables support for the N variant HPT PATA 657 controllers via the new ATA layer. 658 659 If unsure, say N. 660 661config PATA_HPT3X3 662 tristate "HPT 343/363 PATA support" 663 depends on PCI 664 help 665 This option enables support for the HPT 343/363 666 PATA controllers via the new ATA layer 667 668 If unsure, say N. 669 670config PATA_HPT3X3_DMA 671 bool "HPT 343/363 DMA support" 672 depends on PATA_HPT3X3 673 help 674 This option enables DMA support for the HPT343/363 675 controllers. Enable with care as there are still some 676 problems with DMA on this chipset. 677 678config PATA_ICSIDE 679 tristate "Acorn ICS PATA support" 680 depends on ARM && ARCH_ACORN 681 help 682 On Acorn systems, say Y here if you wish to use the ICS PATA 683 interface card. This is not required for ICS partition support. 684 If you are unsure, say N to this. 685 686config PATA_IMX 687 tristate "PATA support for Freescale iMX" 688 depends on ARCH_MXC 689 help 690 This option enables support for the PATA host available on Freescale 691 iMX SoCs. 692 693 If unsure, say N. 694 695config PATA_IT8213 696 tristate "IT8213 PATA support (Experimental)" 697 depends on PCI 698 help 699 This option enables support for the ITE 821 PATA 700 controllers via the new ATA layer. 701 702 If unsure, say N. 703 704config PATA_IT821X 705 tristate "IT8211/2 PATA support" 706 depends on PCI 707 help 708 This option enables support for the ITE 8211 and 8212 709 PATA controllers via the new ATA layer, including RAID 710 mode. 711 712 If unsure, say N. 713 714config PATA_JMICRON 715 tristate "JMicron PATA support" 716 depends on PCI 717 help 718 Enable support for the JMicron IDE controller, via the new 719 ATA layer. 720 721 If unsure, say N. 722 723config PATA_MACIO 724 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" 725 depends on PPC_PMAC 726 help 727 Most IDE capable PowerMacs have IDE busses driven by a variant 728 of this controller which is part of the Apple chipset used on 729 most PowerMac models. Some models have multiple busses using 730 different chipsets, though generally, MacIO is one of them. 731 732config PATA_MARVELL 733 tristate "Marvell PATA support via legacy mode" 734 depends on PCI 735 help 736 This option enables limited support for the Marvell 88SE61xx ATA 737 controllers. If you wish to use only the SATA ports then select 738 the AHCI driver alone. If you wish to the use the PATA port or 739 both SATA and PATA include this driver. 740 741 If unsure, say N. 742 743config PATA_MPC52xx 744 tristate "Freescale MPC52xx SoC internal IDE" 745 depends on PPC_MPC52xx && PPC_BESTCOMM 746 select PPC_BESTCOMM_ATA 747 help 748 This option enables support for integrated IDE controller 749 of the Freescale MPC52xx SoC. 750 751 If unsure, say N. 752 753config PATA_NETCELL 754 tristate "NETCELL Revolution RAID support" 755 depends on PCI 756 help 757 This option enables support for the Netcell Revolution RAID 758 PATA controller. 759 760 If unsure, say N. 761 762config PATA_NINJA32 763 tristate "Ninja32/Delkin Cardbus ATA support" 764 depends on PCI 765 help 766 This option enables support for the Ninja32, Delkin and 767 possibly other brands of Cardbus ATA adapter 768 769 If unsure, say N. 770 771config PATA_NS87415 772 tristate "Nat Semi NS87415 PATA support" 773 depends on PCI 774 help 775 This option enables support for the National Semiconductor 776 NS87415 PCI-IDE controller. 777 778 If unsure, say N. 779 780config PATA_OLDPIIX 781 tristate "Intel PATA old PIIX support" 782 depends on PCI 783 help 784 This option enables support for early PIIX PATA support. 785 786 If unsure, say N. 787 788config PATA_OPTIDMA 789 tristate "OPTI FireStar PATA support (Very Experimental)" 790 depends on PCI 791 help 792 This option enables DMA/PIO support for the later OPTi 793 controllers found on some old motherboards and in some 794 laptops. 795 796 If unsure, say N. 797 798config PATA_PDC2027X 799 tristate "Promise PATA 2027x support" 800 depends on PCI 801 help 802 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. 803 804 If unsure, say N. 805 806config PATA_PDC_OLD 807 tristate "Older Promise PATA controller support" 808 depends on PCI 809 help 810 This option enables support for the Promise 20246, 20262, 20263, 811 20265 and 20267 adapters. 812 813 If unsure, say N. 814 815config PATA_RADISYS 816 tristate "RADISYS 82600 PATA support (Experimental)" 817 depends on PCI 818 help 819 This option enables support for the RADISYS 82600 820 PATA controllers via the new ATA layer 821 822 If unsure, say N. 823 824config PATA_RDC 825 tristate "RDC PATA support" 826 depends on PCI 827 help 828 This option enables basic support for the later RDC PATA controllers 829 controllers via the new ATA layer. For the RDC 1010, you need to 830 enable the IT821X driver instead. 831 832 If unsure, say N. 833 834config PATA_SC1200 835 tristate "SC1200 PATA support" 836 depends on PCI && (X86_32 || COMPILE_TEST) 837 help 838 This option enables support for the NatSemi/AMD SC1200 SoC 839 companion chip used with the Geode processor family. 840 841 If unsure, say N. 842 843config PATA_SCH 844 tristate "Intel SCH PATA support" 845 depends on PCI 846 help 847 This option enables support for Intel SCH PATA on the Intel 848 SCH (US15W, US15L, UL11L) series host controllers. 849 850 If unsure, say N. 851 852config PATA_SERVERWORKS 853 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" 854 depends on PCI 855 help 856 This option enables support for the Serverworks OSB4/CSB5/CSB6 and 857 HT1000 PATA controllers, via the new ATA layer. 858 859 If unsure, say N. 860 861config PATA_SIL680 862 tristate "CMD / Silicon Image 680 PATA support" 863 depends on PCI 864 help 865 This option enables support for CMD / Silicon Image 680 PATA. 866 867 If unsure, say N. 868 869config PATA_SIS 870 tristate "SiS PATA support" 871 depends on PCI 872 help 873 This option enables support for SiS PATA controllers 874 875 If unsure, say N. 876 877config PATA_TOSHIBA 878 tristate "Toshiba Piccolo support (Experimental)" 879 depends on PCI 880 help 881 Support for the Toshiba Piccolo controllers. Currently only the 882 primary channel is supported by this driver. 883 884 If unsure, say N. 885 886config PATA_TRIFLEX 887 tristate "Compaq Triflex PATA support" 888 depends on PCI 889 help 890 Enable support for the Compaq 'Triflex' IDE controller as found 891 on many Compaq Pentium-Pro systems, via the new ATA layer. 892 893 If unsure, say N. 894 895config PATA_VIA 896 tristate "VIA PATA support" 897 depends on PCI 898 help 899 This option enables support for the VIA PATA interfaces 900 found on the many VIA chipsets. 901 902 If unsure, say N. 903 904config PATA_PXA 905 tristate "PXA DMA-capable PATA support" 906 depends on ARCH_PXA 907 help 908 This option enables support for harddrive attached to PXA CPU's bus. 909 910 NOTE: This driver utilizes PXA DMA controller, in case your hardware 911 is not capable of doing MWDMA, use pata_platform instead. 912 913 If unsure, say N. 914 915config PATA_WINBOND 916 tristate "Winbond SL82C105 PATA support" 917 depends on PCI 918 help 919 This option enables support for SL82C105 PATA devices found in the 920 Netwinder and some other systems 921 922 If unsure, say N. 923 924endif # ATA_BMDMA 925 926comment "PIO-only SFF controllers" 927 928config PATA_AT32 929 tristate "Atmel AVR32 PATA support (Experimental)" 930 depends on AVR32 && PLATFORM_AT32AP 931 help 932 This option enables support for the IDE devices on the 933 Atmel AT32AP platform. 934 935 If unsure, say N. 936 937config PATA_CMD640_PCI 938 tristate "CMD640 PCI PATA support (Experimental)" 939 depends on PCI 940 help 941 This option enables support for the CMD640 PCI IDE 942 interface chip. Only the primary channel is currently 943 supported. 944 945 If unsure, say N. 946 947config PATA_FALCON 948 tristate "Atari Falcon PATA support" 949 depends on M68K && ATARI 950 help 951 This option enables support for the on-board IDE 952 interface on the Atari Falcon. 953 954 If unsure, say N. 955 956config PATA_ISAPNP 957 tristate "ISA Plug and Play PATA support" 958 depends on ISAPNP 959 help 960 This option enables support for ISA plug & play ATA 961 controllers such as those found on old soundcards. 962 963 If unsure, say N. 964 965config PATA_IXP4XX_CF 966 tristate "IXP4XX Compact Flash support" 967 depends on ARCH_IXP4XX 968 help 969 This option enables support for a Compact Flash connected on 970 the ixp4xx expansion bus. This driver had been written for 971 Loft/Avila boards in mind but can work with others. 972 973 If unsure, say N. 974 975config PATA_MPIIX 976 tristate "Intel PATA MPIIX support" 977 depends on PCI 978 help 979 This option enables support for MPIIX PATA support. 980 981 If unsure, say N. 982 983config PATA_NS87410 984 tristate "Nat Semi NS87410 PATA support" 985 depends on PCI 986 help 987 This option enables support for the National Semiconductor 988 NS87410 PCI-IDE controller. 989 990 If unsure, say N. 991 992config PATA_OPTI 993 tristate "OPTI621/6215 PATA support (Very Experimental)" 994 depends on PCI 995 help 996 This option enables full PIO support for the early Opti ATA 997 controllers found on some old motherboards. 998 999 If unsure, say N. 1000 1001config PATA_PALMLD 1002 tristate "Palm LifeDrive PATA support" 1003 depends on MACH_PALMLD 1004 help 1005 This option enables support for Palm LifeDrive's internal ATA 1006 port via the new ATA layer. 1007 1008 If unsure, say N. 1009 1010config PATA_PCMCIA 1011 tristate "PCMCIA PATA support" 1012 depends on PCMCIA 1013 help 1014 This option enables support for PCMCIA ATA interfaces, including 1015 compact flash card adapters via the new ATA layer. 1016 1017 If unsure, say N. 1018 1019config PATA_PLATFORM 1020 tristate "Generic platform device PATA support" 1021 depends on EXPERT || PPC || HAVE_PATA_PLATFORM 1022 help 1023 This option enables support for generic directly connected ATA 1024 devices commonly found on embedded systems. 1025 1026 If unsure, say N. 1027 1028config PATA_OF_PLATFORM 1029 tristate "OpenFirmware platform device PATA support" 1030 depends on PATA_PLATFORM && OF 1031 help 1032 This option enables support for generic directly connected ATA 1033 devices commonly found on embedded systems with OpenFirmware 1034 bindings. 1035 1036 If unsure, say N. 1037 1038config PATA_QDI 1039 tristate "QDI VLB PATA support" 1040 depends on ISA 1041 select PATA_LEGACY 1042 help 1043 Support for QDI 6500 and 6580 PATA controllers on VESA local bus. 1044 1045config PATA_RB532 1046 tristate "RouterBoard 532 PATA CompactFlash support" 1047 depends on MIKROTIK_RB532 1048 help 1049 This option enables support for the RouterBoard 532 1050 PATA CompactFlash controller. 1051 1052 If unsure, say N. 1053 1054config PATA_RZ1000 1055 tristate "PC Tech RZ1000 PATA support" 1056 depends on PCI 1057 help 1058 This option enables basic support for the PC Tech RZ1000/1 1059 PATA controllers via the new ATA layer 1060 1061 If unsure, say N. 1062 1063config PATA_SAMSUNG_CF 1064 tristate "Samsung SoC PATA support" 1065 depends on SAMSUNG_DEV_IDE 1066 help 1067 This option enables basic support for Samsung's S3C/S5P board 1068 PATA controllers via the new ATA layer 1069 1070 If unsure, say N. 1071 1072config PATA_WINBOND_VLB 1073 tristate "Winbond W83759A VLB PATA support (Experimental)" 1074 depends on ISA 1075 select PATA_LEGACY 1076 help 1077 Support for the Winbond W83759A controller on Vesa Local Bus 1078 systems. 1079 1080comment "Generic fallback / legacy drivers" 1081 1082config PATA_ACPI 1083 tristate "ACPI firmware driver for PATA" 1084 depends on ATA_ACPI && ATA_BMDMA 1085 help 1086 This option enables an ACPI method driver which drives 1087 motherboard PATA controller interfaces through the ACPI 1088 firmware in the BIOS. This driver can sometimes handle 1089 otherwise unsupported hardware. 1090 1091config ATA_GENERIC 1092 tristate "Generic ATA support" 1093 depends on PCI && ATA_BMDMA 1094 help 1095 This option enables support for generic BIOS configured 1096 ATA controllers via the new ATA layer 1097 1098 If unsure, say N. 1099 1100config PATA_LEGACY 1101 tristate "Legacy ISA PATA support (Experimental)" 1102 depends on (ISA || PCI) 1103 help 1104 This option enables support for ISA/VLB/PCI bus legacy PATA 1105 ports and allows them to be accessed via the new ATA layer. 1106 1107 If unsure, say N. 1108 1109endif # ATA_SFF 1110endif # ATA 1111