xref: /linux/drivers/ata/Kconfig (revision ed3174d93c342b8b2eeba6bbd124707d55304a7b) 
1#
2# SATA/PATA driver configuration
3#
4
5menuconfig ATA
6	tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
7	depends on HAS_IOMEM
8	depends on BLOCK
9	depends on !(M32R || M68K) || BROKEN
10	depends on !SUN4 || BROKEN
11	select SCSI
12	---help---
13	  If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
14	  any other ATA device under Linux, say Y and make sure that you know
15	  the name of your ATA host adapter (the card inside your computer
16	  that "speaks" the ATA protocol, also called ATA controller),
17	  because you will be asked for it.
18
19	  NOTE: ATA enables basic SCSI support; *however*,
20	  'SCSI disk support', 'SCSI tape support', or
21	  'SCSI CDROM support' may also be needed,
22	  depending on your hardware configuration.
23
24if ATA
25
26config ATA_NONSTANDARD
27       bool
28       default n
29
30config ATA_ACPI
31	bool
32	depends on ACPI && PCI
33	default y
34	help
35	  This option adds support for ATA-related ACPI objects.
36	  These ACPI objects add the ability to retrieve taskfiles
37	  from the ACPI BIOS and write them to the disk controller.
38	  These objects may be related to performance, security,
39	  power management, or other areas.
40	  You can disable this at kernel boot time by using the
41	  option libata.noacpi=1
42
43config SATA_AHCI
44	tristate "AHCI SATA support"
45	depends on PCI
46	help
47	  This option enables support for AHCI Serial ATA.
48
49	  If unsure, say N.
50
51config SATA_SVW
52	tristate "ServerWorks Frodo / Apple K2 SATA support"
53	depends on PCI
54	help
55	  This option enables support for Broadcom/Serverworks/Apple K2
56	  SATA support.
57
58	  If unsure, say N.
59
60config ATA_PIIX
61	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
62	depends on PCI
63	help
64	  This option enables support for ICH5/6/7/8 Serial ATA
65	  and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
66	  host controllers.
67
68	  If unsure, say N.
69
70config SATA_MV
71	tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
72	depends on EXPERIMENTAL
73	help
74	  This option enables support for the Marvell Serial ATA family.
75	  Currently supports 88SX[56]0[48][01] chips.
76
77	  If unsure, say N.
78
79config SATA_NV
80	tristate "NVIDIA SATA support"
81	depends on PCI
82	help
83	  This option enables support for NVIDIA Serial ATA.
84
85	  If unsure, say N.
86
87config PDC_ADMA
88	tristate "Pacific Digital ADMA support"
89	depends on PCI
90	help
91	  This option enables support for Pacific Digital ADMA controllers
92
93	  If unsure, say N.
94
95config SATA_QSTOR
96	tristate "Pacific Digital SATA QStor support"
97	depends on PCI
98	help
99	  This option enables support for Pacific Digital Serial ATA QStor.
100
101	  If unsure, say N.
102
103config SATA_PROMISE
104	tristate "Promise SATA TX2/TX4 support"
105	depends on PCI
106	help
107	  This option enables support for Promise Serial ATA TX2/TX4.
108
109	  If unsure, say N.
110
111config SATA_SX4
112	tristate "Promise SATA SX4 support"
113	depends on PCI && EXPERIMENTAL
114	help
115	  This option enables support for Promise Serial ATA SX4.
116
117	  If unsure, say N.
118
119config SATA_SIL
120	tristate "Silicon Image SATA support"
121	depends on PCI
122	help
123	  This option enables support for Silicon Image Serial ATA.
124
125	  If unsure, say N.
126
127config SATA_SIL24
128	tristate "Silicon Image 3124/3132 SATA support"
129	depends on PCI
130	help
131	  This option enables support for Silicon Image 3124/3132 Serial ATA.
132
133	  If unsure, say N.
134
135config SATA_SIS
136	tristate "SiS 964/965/966/180 SATA support"
137	depends on PCI
138	select PATA_SIS
139	help
140	  This option enables support for SiS Serial ATA on
141	  SiS 964/965/966/180 and Parallel ATA on SiS 180.
142	  The PATA support for SiS 180 requires additionally to
143	  enable the PATA_SIS driver in the config.
144	  If unsure, say N.
145
146config SATA_ULI
147	tristate "ULi Electronics SATA support"
148	depends on PCI
149	help
150	  This option enables support for ULi Electronics SATA.
151
152	  If unsure, say N.
153
154config SATA_VIA
155	tristate "VIA SATA support"
156	depends on PCI
157	help
158	  This option enables support for VIA Serial ATA.
159
160	  If unsure, say N.
161
162config SATA_VITESSE
163	tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
164	depends on PCI
165	help
166	  This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
167
168	  If unsure, say N.
169
170config SATA_INIC162X
171	tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
172	depends on PCI && EXPERIMENTAL
173	help
174	  This option enables support for Initio 162x Serial ATA.
175
176config PATA_ACPI
177	tristate "ACPI firmware driver for PATA"
178	depends on ATA_ACPI
179	help
180	  This option enables an ACPI method driver which drives
181	  motherboard PATA controller interfaces through the ACPI
182	  firmware in the BIOS. This driver can sometimes handle
183	  otherwise unsupported hardware.
184
185config SATA_FSL
186	tristate "Freescale 3.0Gbps SATA support"
187	depends on FSL_SOC
188	help
189	  This option enables support for Freescale 3.0Gbps SATA controller.
190	  It can be found on MPC837x and MPC8315.
191
192	  If unsure, say N.
193
194config PATA_ALI
195	tristate "ALi PATA support (Experimental)"
196	depends on PCI && EXPERIMENTAL
197	help
198	  This option enables support for the ALi ATA interfaces
199	  found on the many ALi chipsets.
200
201	  If unsure, say N.
202
203config PATA_AMD
204	tristate "AMD/NVidia PATA support"
205	depends on PCI
206	help
207	  This option enables support for the AMD and NVidia PATA
208	  interfaces found on the chipsets for Athlon/Athlon64.
209
210	  If unsure, say N.
211
212config PATA_ARTOP
213	tristate "ARTOP 6210/6260 PATA support"
214	depends on PCI
215	help
216	  This option enables support for ARTOP PATA controllers.
217
218	  If unsure, say N.
219
220config PATA_AT32
221	tristate "Atmel AVR32 PATA support (Experimental)"
222	depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
223	help
224	  This option enables support for the IDE devices on the
225	  Atmel AT32AP platform.
226
227	  If unsure, say N.
228
229config PATA_ATIIXP
230	tristate "ATI PATA support"
231	depends on PCI
232	help
233	  This option enables support for the ATI ATA interfaces
234	  found on the many ATI chipsets.
235
236	  If unsure, say N.
237
238config PATA_CMD640_PCI
239	tristate "CMD640 PCI PATA support (Very Experimental)"
240	depends on PCI && EXPERIMENTAL
241	help
242	  This option enables support for the CMD640 PCI IDE
243	  interface chip. Only the primary channel is currently
244	  supported.
245
246	  If unsure, say N.
247
248config PATA_CMD64X
249	tristate "CMD64x PATA support"
250	depends on PCI
251	help
252	  This option enables support for the CMD64x series chips
253	  except for the CMD640.
254
255	  If unsure, say N.
256
257config PATA_CS5520
258	tristate "CS5510/5520 PATA support"
259	depends on PCI
260	help
261	  This option enables support for the Cyrix 5510/5520
262	  companion chip used with the MediaGX/Geode processor family.
263
264	  If unsure, say N.
265
266config PATA_CS5530
267	tristate "CS5530 PATA support (Experimental)"
268	depends on PCI && EXPERIMENTAL
269	help
270	  This option enables support for the Cyrix/NatSemi/AMD CS5530
271	  companion chip used with the MediaGX/Geode processor family.
272
273	  If unsure, say N.
274
275config PATA_CS5535
276	tristate "CS5535 PATA support (Experimental)"
277	depends on PCI && X86 && !X86_64 && EXPERIMENTAL
278	help
279	  This option enables support for the NatSemi/AMD CS5535
280	  companion chip used with the Geode processor family.
281
282	  If unsure, say N.
283
284config PATA_CS5536
285	tristate "CS5536 PATA support (Experimental)"
286	depends on PCI && X86 && !X86_64 && EXPERIMENTAL
287	help
288	  This option enables support for the AMD CS5536
289	  companion chip used with the Geode LX processor family.
290
291	  If unsure, say N.
292
293config PATA_CYPRESS
294	tristate "Cypress CY82C693 PATA support (Very Experimental)"
295	depends on PCI && EXPERIMENTAL
296	help
297	  This option enables support for the Cypress/Contaq CY82C693
298	  chipset found in some Alpha systems
299
300	  If unsure, say N.
301
302config PATA_EFAR
303	tristate "EFAR SLC90E66 support"
304	depends on PCI
305	help
306	  This option enables support for the EFAR SLC90E66
307	  IDE controller found on some older machines.
308
309	  If unsure, say N.
310
311config ATA_GENERIC
312	tristate "Generic ATA support"
313	depends on PCI
314	help
315	  This option enables support for generic BIOS configured
316	  ATA controllers via the new ATA layer
317
318	  If unsure, say N.
319
320config PATA_HPT366
321	tristate "HPT 366/368 PATA support"
322	depends on PCI
323	help
324	  This option enables support for the HPT 366 and 368
325	  PATA controllers via the new ATA layer.
326
327	  If unsure, say N.
328
329config PATA_HPT37X
330	tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
331	depends on PCI && EXPERIMENTAL
332	help
333	  This option enables support for the majority of the later HPT
334	  PATA controllers via the new ATA layer.
335
336	  If unsure, say N.
337
338config PATA_HPT3X2N
339	tristate "HPT 372N/302N PATA support (Very Experimental)"
340	depends on PCI && EXPERIMENTAL
341	help
342	  This option enables support for the N variant HPT PATA
343	  controllers via the new ATA layer
344
345	  If unsure, say N.
346
347config PATA_HPT3X3
348	tristate "HPT 343/363 PATA support"
349	depends on PCI
350	help
351	  This option enables support for the HPT 343/363
352	  PATA controllers via the new ATA layer
353
354	  If unsure, say N.
355
356config PATA_HPT3X3_DMA
357	bool "HPT 343/363 DMA support (Experimental)"
358	depends on PATA_HPT3X3
359	help
360	  This option enables DMA support for the HPT343/363
361	  controllers. Enable with care as there are still some
362	  problems with DMA on this chipset.
363
364config PATA_ISAPNP
365	tristate "ISA Plug and Play PATA support (Experimental)"
366	depends on EXPERIMENTAL && ISAPNP
367	help
368	  This option enables support for ISA plug & play ATA
369	  controllers such as those found on old soundcards.
370
371	  If unsure, say N.
372
373config PATA_IT821X
374	tristate "IT8211/2 PATA support"
375	depends on PCI
376	help
377	  This option enables support for the ITE 8211 and 8212
378	  PATA controllers via the new ATA layer, including RAID
379	  mode.
380
381	  If unsure, say N.
382
383config PATA_IT8213
384	tristate "IT8213 PATA support (Experimental)"
385	depends on PCI && EXPERIMENTAL
386	help
387	  This option enables support for the ITE 821 PATA
388          controllers via the new ATA layer.
389
390	  If unsure, say N.
391
392config PATA_JMICRON
393	tristate "JMicron PATA support"
394	depends on PCI
395	help
396	  Enable support for the JMicron IDE controller, via the new
397	  ATA layer.
398
399	  If unsure, say N.
400
401config PATA_LEGACY
402	tristate "Legacy ISA PATA support (Experimental)"
403	depends on ISA && EXPERIMENTAL
404	help
405	  This option enables support for ISA/VLB bus legacy PATA
406	  ports and allows them to be accessed via the new ATA layer.
407
408	  If unsure, say N.
409
410config PATA_TRIFLEX
411	tristate "Compaq Triflex PATA support"
412	depends on PCI
413	help
414	  Enable support for the Compaq 'Triflex' IDE controller as found
415	  on many Compaq Pentium-Pro systems, via the new ATA layer.
416
417	  If unsure, say N.
418
419config PATA_MARVELL
420	tristate "Marvell PATA support via legacy mode"
421	depends on PCI
422	help
423	  This option enables limited support for the Marvell 88SE6145 ATA
424	  controller.
425
426	  If unsure, say N.
427
428config PATA_MPC52xx
429	tristate "Freescale MPC52xx SoC internal IDE"
430	depends on PPC_MPC52xx
431	help
432	  This option enables support for integrated IDE controller
433	  of the Freescale MPC52xx SoC.
434
435	  If unsure, say N.
436
437config PATA_MPIIX
438	tristate "Intel PATA MPIIX support"
439	depends on PCI
440	help
441	  This option enables support for MPIIX PATA support.
442
443	  If unsure, say N.
444
445config PATA_OLDPIIX
446	tristate "Intel PATA old PIIX support"
447	depends on PCI
448	help
449	  This option enables support for early PIIX PATA support.
450
451	  If unsure, say N.
452
453config PATA_NETCELL
454	tristate "NETCELL Revolution RAID support"
455	depends on PCI
456	help
457	  This option enables support for the Netcell Revolution RAID
458	  PATA controller.
459
460	  If unsure, say N.
461
462config PATA_NINJA32
463	tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
464	depends on PCI && EXPERIMENTAL
465	help
466	  This option enables support for the Ninja32, Delkin and
467	  possibly other brands of Cardbus ATA adapter
468
469	  If unsure, say N.
470
471config PATA_NS87410
472	tristate "Nat Semi NS87410 PATA support (Experimental)"
473	depends on PCI && EXPERIMENTAL
474	help
475	  This option enables support for the National Semiconductor
476	  NS87410 PCI-IDE controller.
477
478	  If unsure, say N.
479
480config PATA_NS87415
481	tristate "Nat Semi NS87415 PATA support (Experimental)"
482	depends on PCI && EXPERIMENTAL
483	help
484	  This option enables support for the National Semiconductor
485	  NS87415 PCI-IDE controller.
486
487	  If unsure, say N.
488
489config PATA_OPTI
490	tristate "OPTI621/6215 PATA support (Very Experimental)"
491	depends on PCI && EXPERIMENTAL
492	help
493	  This option enables full PIO support for the early Opti ATA
494	  controllers found on some old motherboards.
495
496	  If unsure, say N.
497
498config PATA_OPTIDMA
499	tristate "OPTI FireStar PATA support (Very Experimental)"
500	depends on PCI && EXPERIMENTAL
501	help
502	  This option enables DMA/PIO support for the later OPTi
503	  controllers found on some old motherboards and in some
504	  laptops.
505
506	  If unsure, say N.
507
508config PATA_PCMCIA
509	tristate "PCMCIA PATA support"
510	depends on PCMCIA
511	help
512	  This option enables support for PCMCIA ATA interfaces, including
513	  compact flash card adapters via the new ATA layer.
514
515	  If unsure, say N.
516
517config PATA_PDC_OLD
518	tristate "Older Promise PATA controller support (Experimental)"
519	depends on PCI && EXPERIMENTAL
520	help
521	  This option enables support for the Promise 20246, 20262, 20263,
522	  20265 and 20267 adapters.
523
524	  If unsure, say N.
525
526config PATA_QDI
527	tristate "QDI VLB PATA support"
528	depends on ISA
529	help
530	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
531
532config PATA_RADISYS
533	tristate "RADISYS 82600 PATA support (Very Experimental)"
534	depends on PCI && EXPERIMENTAL
535	help
536	  This option enables support for the RADISYS 82600
537	  PATA controllers via the new ATA layer
538
539	  If unsure, say N.
540
541config PATA_RZ1000
542	tristate "PC Tech RZ1000 PATA support"
543	depends on PCI
544	help
545	  This option enables basic support for the PC Tech RZ1000/1
546	  PATA controllers via the new ATA layer
547
548	  If unsure, say N.
549
550config PATA_SC1200
551	tristate "SC1200 PATA support (Very Experimental)"
552	depends on PCI && EXPERIMENTAL
553	help
554	  This option enables support for the NatSemi/AMD SC1200 SoC
555	  companion chip used with the Geode processor family.
556
557	  If unsure, say N.
558
559config PATA_SERVERWORKS
560	tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
561	depends on PCI
562	help
563	  This option enables support for the Serverworks OSB4/CSB5/CSB6 and
564	  HT1000 PATA controllers, via the new ATA layer.
565
566	  If unsure, say N.
567
568config PATA_PDC2027X
569	tristate "Promise PATA 2027x support"
570	depends on PCI
571	help
572	  This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
573
574	  If unsure, say N.
575
576config PATA_SIL680
577	tristate "CMD / Silicon Image 680 PATA support"
578	depends on PCI
579	help
580	  This option enables support for CMD / Silicon Image 680 PATA.
581
582	  If unsure, say N.
583
584config PATA_SIS
585	tristate "SiS PATA support (Experimental)"
586	depends on PCI && EXPERIMENTAL
587	help
588	  This option enables support for SiS PATA controllers
589
590	  If unsure, say N.
591
592config PATA_VIA
593	tristate "VIA PATA support"
594	depends on PCI
595	help
596	  This option enables support for the VIA PATA interfaces
597	  found on the many VIA chipsets.
598
599	  If unsure, say N.
600
601config PATA_WINBOND
602	tristate "Winbond SL82C105 PATA support"
603	depends on PCI
604	help
605	  This option enables support for SL82C105 PATA devices found in the
606	  Netwinder and some other systems
607
608	  If unsure, say N.
609
610config PATA_WINBOND_VLB
611	tristate "Winbond W83759A VLB PATA support (Experimental)"
612	depends on ISA && EXPERIMENTAL
613	help
614	  Support for the Winbond W83759A controller on Vesa Local Bus
615	  systems.
616
617config PATA_PLATFORM
618	tristate "Generic platform device PATA support"
619	depends on EMBEDDED || ARCH_RPC || PPC
620	help
621	  This option enables support for generic directly connected ATA
622	  devices commonly found on embedded systems.
623
624	  If unsure, say N.
625
626config PATA_OF_PLATFORM
627	tristate "OpenFirmware platform device PATA support"
628	depends on PATA_PLATFORM && PPC_OF
629	help
630	  This option enables support for generic directly connected ATA
631	  devices commonly found on embedded systems with OpenFirmware
632	  bindings.
633
634	  If unsure, say N.
635
636config PATA_ICSIDE
637	tristate "Acorn ICS PATA support"
638	depends on ARM && ARCH_ACORN
639	help
640	  On Acorn systems, say Y here if you wish to use the ICS PATA
641	  interface card.  This is not required for ICS partition support.
642	  If you are unsure, say N to this.
643
644config PATA_IXP4XX_CF
645	tristate "IXP4XX Compact Flash support"
646	depends on ARCH_IXP4XX
647	help
648	  This option enables support for a Compact Flash connected on
649	  the ixp4xx expansion bus. This driver had been written for
650	  Loft/Avila boards in mind but can work with others.
651
652	  If unsure, say N.
653
654config PATA_SCC
655	tristate "Toshiba's Cell Reference Set IDE support"
656	depends on PCI && PPC_CELLEB
657	help
658	  This option enables support for the built-in IDE controller on
659	  Toshiba Cell Reference Board.
660
661	  If unsure, say N.
662
663config PATA_BF54X
664	tristate "Blackfin 54x ATAPI support"
665	depends on BF542 || BF548 || BF549
666	help
667	  This option enables support for the built-in ATAPI controller on
668	  Blackfin 54x family chips.
669
670	  If unsure, say N.
671
672endif # ATA
673