1# 2# SATA/PATA driver configuration 3# 4 5config HAVE_PATA_PLATFORM 6 bool 7 help 8 This is an internal configuration node for any machine that 9 uses pata-platform driver to enable the relevant driver in the 10 configuration structure without having to submit endless patches 11 to update the PATA_PLATFORM entry. 12 13menuconfig ATA 14 tristate "Serial ATA and Parallel ATA drivers (libata)" 15 depends on HAS_IOMEM 16 depends on BLOCK 17 depends on !(M32R || M68K || S390) || BROKEN 18 select SCSI 19 select GLOB 20 ---help--- 21 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or 22 any other ATA device under Linux, say Y and make sure that you know 23 the name of your ATA host adapter (the card inside your computer 24 that "speaks" the ATA protocol, also called ATA controller), 25 because you will be asked for it. 26 27 NOTE: ATA enables basic SCSI support; *however*, 28 'SCSI disk support', 'SCSI tape support', or 29 'SCSI CDROM support' may also be needed, 30 depending on your hardware configuration. 31 32if ATA 33 34config ATA_NONSTANDARD 35 bool 36 default n 37 38config ATA_VERBOSE_ERROR 39 bool "Verbose ATA error reporting" 40 default y 41 help 42 This option adds parsing of ATA command descriptions and error bits 43 in libata kernel output, making it easier to interpret. 44 This option will enlarge the kernel by approx. 6KB. Disable it only 45 if kernel size is more important than ease of debugging. 46 47 If unsure, say Y. 48 49config ATA_ACPI 50 bool "ATA ACPI Support" 51 depends on ACPI 52 default y 53 help 54 This option adds support for ATA-related ACPI objects. 55 These ACPI objects add the ability to retrieve taskfiles 56 from the ACPI BIOS and write them to the disk controller. 57 These objects may be related to performance, security, 58 power management, or other areas. 59 You can disable this at kernel boot time by using the 60 option libata.noacpi=1 61 62config SATA_ZPODD 63 bool "SATA Zero Power Optical Disc Drive (ZPODD) support" 64 depends on ATA_ACPI && PM 65 default n 66 help 67 This option adds support for SATA Zero Power Optical Disc 68 Drive (ZPODD). It requires both the ODD and the platform 69 support, and if enabled, will automatically power on/off the 70 ODD when certain condition is satisfied. This does not impact 71 end user's experience of the ODD, only power is saved when 72 the ODD is not in use (i.e. no disc inside). 73 74 If unsure, say N. 75 76config SATA_PMP 77 bool "SATA Port Multiplier support" 78 default y 79 help 80 This option adds support for SATA Port Multipliers 81 (the SATA version of an ethernet hub, or SAS expander). 82 83comment "Controllers with non-SFF native interface" 84 85config SATA_AHCI 86 tristate "AHCI SATA support" 87 depends on PCI 88 help 89 This option enables support for AHCI Serial ATA. 90 91 If unsure, say N. 92 93config SATA_AHCI_PLATFORM 94 tristate "Platform AHCI SATA support" 95 help 96 This option enables support for Platform AHCI Serial ATA 97 controllers. 98 99 If unsure, say N. 100 101config AHCI_BRCMSTB 102 tristate "Broadcom STB AHCI SATA support" 103 depends on ARCH_BRCMSTB 104 help 105 This option enables support for the AHCI SATA3 controller found on 106 STB SoC's. 107 108 If unsure, say N. 109 110config AHCI_DA850 111 tristate "DaVinci DA850 AHCI SATA support" 112 depends on ARCH_DAVINCI_DA850 113 help 114 This option enables support for the DaVinci DA850 SoC's 115 onboard AHCI SATA. 116 117 If unsure, say N. 118 119config AHCI_ST 120 tristate "ST AHCI SATA support" 121 depends on ARCH_STI 122 help 123 This option enables support for ST AHCI SATA controller. 124 125 If unsure, say N. 126 127config AHCI_IMX 128 tristate "Freescale i.MX AHCI SATA support" 129 depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) 130 help 131 This option enables support for the Freescale i.MX SoC's 132 onboard AHCI SATA. 133 134 If unsure, say N. 135 136config AHCI_CEVA 137 tristate "CEVA AHCI SATA support" 138 depends on OF 139 help 140 This option enables support for the CEVA AHCI SATA. 141 It can be found on the Xilinx Zynq UltraScale+ MPSoC. 142 143 If unsure, say N. 144 145config AHCI_MVEBU 146 tristate "Marvell EBU AHCI SATA support" 147 depends on ARCH_MVEBU 148 help 149 This option enables support for the Marvebu EBU SoC's 150 onboard AHCI SATA. 151 152 If unsure, say N. 153 154config AHCI_SUNXI 155 tristate "Allwinner sunxi AHCI SATA support" 156 depends on ARCH_SUNXI 157 help 158 This option enables support for the Allwinner sunxi SoC's 159 onboard AHCI SATA. 160 161 If unsure, say N. 162 163config AHCI_TEGRA 164 tristate "NVIDIA Tegra124 AHCI SATA support" 165 depends on ARCH_TEGRA 166 help 167 This option enables support for the NVIDIA Tegra124 SoC's 168 onboard AHCI SATA. 169 170 If unsure, say N. 171 172config AHCI_XGENE 173 tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" 174 depends on PHY_XGENE 175 help 176 This option enables support for APM X-Gene SoC SATA host controller. 177 178config SATA_FSL 179 tristate "Freescale 3.0Gbps SATA support" 180 depends on FSL_SOC 181 help 182 This option enables support for Freescale 3.0Gbps SATA controller. 183 It can be found on MPC837x and MPC8315. 184 185 If unsure, say N. 186 187config SATA_INIC162X 188 tristate "Initio 162x SATA support (Very Experimental)" 189 depends on PCI 190 help 191 This option enables support for Initio 162x Serial ATA. 192 193config SATA_ACARD_AHCI 194 tristate "ACard AHCI variant (ATP 8620)" 195 depends on PCI 196 help 197 This option enables support for Acard. 198 199 If unsure, say N. 200 201config SATA_SIL24 202 tristate "Silicon Image 3124/3132 SATA support" 203 depends on PCI 204 help 205 This option enables support for Silicon Image 3124/3132 Serial ATA. 206 207 If unsure, say N. 208 209config ATA_SFF 210 bool "ATA SFF support (for legacy IDE and PATA)" 211 default y 212 help 213 This option adds support for ATA controllers with SFF 214 compliant or similar programming interface. 215 216 SFF is the legacy IDE interface that has been around since 217 the dawn of time. Almost all PATA controllers have an 218 SFF interface. Many SATA controllers have an SFF interface 219 when configured into a legacy compatibility mode. 220 221 For users with exclusively modern controllers like AHCI, 222 Silicon Image 3124, or Marvell 6440, you may choose to 223 disable this unneeded SFF support. 224 225 If unsure, say Y. 226 227if ATA_SFF 228 229comment "SFF controllers with custom DMA interface" 230 231config PDC_ADMA 232 tristate "Pacific Digital ADMA support" 233 depends on PCI 234 help 235 This option enables support for Pacific Digital ADMA controllers 236 237 If unsure, say N. 238 239config PATA_OCTEON_CF 240 tristate "OCTEON Boot Bus Compact Flash support" 241 depends on CAVIUM_OCTEON_SOC 242 help 243 This option enables a polled compact flash driver for use with 244 compact flash cards attached to the OCTEON boot bus. 245 246 If unsure, say N. 247 248config SATA_QSTOR 249 tristate "Pacific Digital SATA QStor support" 250 depends on PCI 251 help 252 This option enables support for Pacific Digital Serial ATA QStor. 253 254 If unsure, say N. 255 256config SATA_SX4 257 tristate "Promise SATA SX4 support (Experimental)" 258 depends on PCI 259 help 260 This option enables support for Promise Serial ATA SX4. 261 262 If unsure, say N. 263 264config ATA_BMDMA 265 bool "ATA BMDMA support" 266 default y 267 help 268 This option adds support for SFF ATA controllers with BMDMA 269 capability. BMDMA stands for bus-master DMA and is the 270 de facto DMA interface for SFF controllers. 271 272 If unsure, say Y. 273 274if ATA_BMDMA 275 276comment "SATA SFF controllers with BMDMA" 277 278config ATA_PIIX 279 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" 280 depends on PCI 281 help 282 This option enables support for ICH5/6/7/8 Serial ATA 283 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series 284 host controllers. 285 286 If unsure, say N. 287 288config SATA_DWC 289 tristate "DesignWare Cores SATA support" 290 depends on 460EX 291 select DW_DMAC 292 help 293 This option enables support for the on-chip SATA controller of the 294 AppliedMicro processor 460EX. 295 296 If unsure, say N. 297 298config SATA_DWC_DEBUG 299 bool "Debugging driver version" 300 depends on SATA_DWC 301 help 302 This option enables debugging output in the driver. 303 304config SATA_DWC_VDEBUG 305 bool "Verbose debug output" 306 depends on SATA_DWC_DEBUG 307 help 308 This option enables the taskfile dumping and NCQ debugging. 309 310config SATA_HIGHBANK 311 tristate "Calxeda Highbank SATA support" 312 depends on ARCH_HIGHBANK || COMPILE_TEST 313 help 314 This option enables support for the Calxeda Highbank SoC's 315 onboard SATA. 316 317 If unsure, say N. 318 319config SATA_MV 320 tristate "Marvell SATA support" 321 depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ 322 ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST 323 select GENERIC_PHY 324 help 325 This option enables support for the Marvell Serial ATA family. 326 Currently supports 88SX[56]0[48][01] PCI(-X) chips, 327 as well as the newer [67]042 PCI-X/PCIe and SOC devices. 328 329 If unsure, say N. 330 331config SATA_NV 332 tristate "NVIDIA SATA support" 333 depends on PCI 334 help 335 This option enables support for NVIDIA Serial ATA. 336 337 If unsure, say N. 338 339config SATA_PROMISE 340 tristate "Promise SATA TX2/TX4 support" 341 depends on PCI 342 help 343 This option enables support for Promise Serial ATA TX2/TX4. 344 345 If unsure, say N. 346 347config SATA_RCAR 348 tristate "Renesas R-Car SATA support" 349 depends on ARCH_SHMOBILE || COMPILE_TEST 350 help 351 This option enables support for Renesas R-Car Serial ATA. 352 353 If unsure, say N. 354 355config SATA_SIL 356 tristate "Silicon Image SATA support" 357 depends on PCI 358 help 359 This option enables support for Silicon Image Serial ATA. 360 361 If unsure, say N. 362 363config SATA_SIS 364 tristate "SiS 964/965/966/180 SATA support" 365 depends on PCI 366 select PATA_SIS 367 help 368 This option enables support for SiS Serial ATA on 369 SiS 964/965/966/180 and Parallel ATA on SiS 180. 370 The PATA support for SiS 180 requires additionally to 371 enable the PATA_SIS driver in the config. 372 If unsure, say N. 373 374config SATA_SVW 375 tristate "ServerWorks Frodo / Apple K2 SATA support" 376 depends on PCI 377 help 378 This option enables support for Broadcom/Serverworks/Apple K2 379 SATA support. 380 381 If unsure, say N. 382 383config SATA_ULI 384 tristate "ULi Electronics SATA support" 385 depends on PCI 386 help 387 This option enables support for ULi Electronics SATA. 388 389 If unsure, say N. 390 391config SATA_VIA 392 tristate "VIA SATA support" 393 depends on PCI 394 help 395 This option enables support for VIA Serial ATA. 396 397 If unsure, say N. 398 399config SATA_VITESSE 400 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" 401 depends on PCI 402 help 403 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. 404 405 If unsure, say N. 406 407comment "PATA SFF controllers with BMDMA" 408 409config PATA_ALI 410 tristate "ALi PATA support" 411 depends on PCI 412 help 413 This option enables support for the ALi ATA interfaces 414 found on the many ALi chipsets. 415 416 If unsure, say N. 417 418config PATA_AMD 419 tristate "AMD/NVidia PATA support" 420 depends on PCI 421 help 422 This option enables support for the AMD and NVidia PATA 423 interfaces found on the chipsets for Athlon/Athlon64. 424 425 If unsure, say N. 426 427config PATA_ARASAN_CF 428 tristate "ARASAN CompactFlash PATA Controller Support" 429 depends on ARCH_SPEAR13XX || COMPILE_TEST 430 depends on DMADEVICES 431 select DMA_ENGINE 432 help 433 Say Y here to support the ARASAN CompactFlash PATA controller 434 435config PATA_ARTOP 436 tristate "ARTOP 6210/6260 PATA support" 437 depends on PCI 438 help 439 This option enables support for ARTOP PATA controllers. 440 441 If unsure, say N. 442 443config PATA_ATIIXP 444 tristate "ATI PATA support" 445 depends on PCI 446 help 447 This option enables support for the ATI ATA interfaces 448 found on the many ATI chipsets. 449 450 If unsure, say N. 451 452config PATA_ATP867X 453 tristate "ARTOP/Acard ATP867X PATA support" 454 depends on PCI 455 help 456 This option enables support for ARTOP/Acard ATP867X PATA 457 controllers. 458 459 If unsure, say N. 460 461config PATA_BF54X 462 tristate "Blackfin 54x ATAPI support" 463 depends on BF542 || BF548 || BF549 464 help 465 This option enables support for the built-in ATAPI controller on 466 Blackfin 54x family chips. 467 468 If unsure, say N. 469 470config PATA_CMD64X 471 tristate "CMD64x PATA support" 472 depends on PCI 473 help 474 This option enables support for the CMD64x series chips 475 except for the CMD640. 476 477 If unsure, say N. 478 479config PATA_CS5520 480 tristate "CS5510/5520 PATA support" 481 depends on PCI && (X86_32 || COMPILE_TEST) 482 help 483 This option enables support for the Cyrix 5510/5520 484 companion chip used with the MediaGX/Geode processor family. 485 486 If unsure, say N. 487 488config PATA_CS5530 489 tristate "CS5530 PATA support" 490 depends on PCI && (X86_32 || COMPILE_TEST) 491 help 492 This option enables support for the Cyrix/NatSemi/AMD CS5530 493 companion chip used with the MediaGX/Geode processor family. 494 495 If unsure, say N. 496 497config PATA_CS5535 498 tristate "CS5535 PATA support (Experimental)" 499 depends on PCI && X86_32 500 help 501 This option enables support for the NatSemi/AMD CS5535 502 companion chip used with the Geode processor family. 503 504 If unsure, say N. 505 506config PATA_CS5536 507 tristate "CS5536 PATA support" 508 depends on PCI && (X86_32 || MIPS || COMPILE_TEST) 509 help 510 This option enables support for the AMD CS5536 511 companion chip used with the Geode LX processor family. 512 513 If unsure, say N. 514 515config PATA_CYPRESS 516 tristate "Cypress CY82C693 PATA support (Very Experimental)" 517 depends on PCI 518 help 519 This option enables support for the Cypress/Contaq CY82C693 520 chipset found in some Alpha systems 521 522 If unsure, say N. 523 524config PATA_EFAR 525 tristate "EFAR SLC90E66 support" 526 depends on PCI 527 help 528 This option enables support for the EFAR SLC90E66 529 IDE controller found on some older machines. 530 531 If unsure, say N. 532 533config PATA_EP93XX 534 tristate "Cirrus Logic EP93xx PATA support" 535 depends on ARCH_EP93XX 536 help 537 This option enables support for the PATA controller in 538 the Cirrus Logic EP9312 and EP9315 ARM CPU. 539 540 If unsure, say N. 541 542config PATA_HPT366 543 tristate "HPT 366/368 PATA support" 544 depends on PCI 545 help 546 This option enables support for the HPT 366 and 368 547 PATA controllers via the new ATA layer. 548 549 If unsure, say N. 550 551config PATA_HPT37X 552 tristate "HPT 370/370A/371/372/374/302 PATA support" 553 depends on PCI 554 help 555 This option enables support for the majority of the later HPT 556 PATA controllers via the new ATA layer. 557 558 If unsure, say N. 559 560config PATA_HPT3X2N 561 tristate "HPT 371N/372N/302N PATA support" 562 depends on PCI 563 help 564 This option enables support for the N variant HPT PATA 565 controllers via the new ATA layer. 566 567 If unsure, say N. 568 569config PATA_HPT3X3 570 tristate "HPT 343/363 PATA support" 571 depends on PCI 572 help 573 This option enables support for the HPT 343/363 574 PATA controllers via the new ATA layer 575 576 If unsure, say N. 577 578config PATA_HPT3X3_DMA 579 bool "HPT 343/363 DMA support" 580 depends on PATA_HPT3X3 581 help 582 This option enables DMA support for the HPT343/363 583 controllers. Enable with care as there are still some 584 problems with DMA on this chipset. 585 586config PATA_ICSIDE 587 tristate "Acorn ICS PATA support" 588 depends on ARM && ARCH_ACORN 589 help 590 On Acorn systems, say Y here if you wish to use the ICS PATA 591 interface card. This is not required for ICS partition support. 592 If you are unsure, say N to this. 593 594config PATA_IMX 595 tristate "PATA support for Freescale iMX" 596 depends on ARCH_MXC 597 help 598 This option enables support for the PATA host available on Freescale 599 iMX SoCs. 600 601 If unsure, say N. 602 603config PATA_IT8213 604 tristate "IT8213 PATA support (Experimental)" 605 depends on PCI 606 help 607 This option enables support for the ITE 821 PATA 608 controllers via the new ATA layer. 609 610 If unsure, say N. 611 612config PATA_IT821X 613 tristate "IT8211/2 PATA support" 614 depends on PCI 615 help 616 This option enables support for the ITE 8211 and 8212 617 PATA controllers via the new ATA layer, including RAID 618 mode. 619 620 If unsure, say N. 621 622config PATA_JMICRON 623 tristate "JMicron PATA support" 624 depends on PCI 625 help 626 Enable support for the JMicron IDE controller, via the new 627 ATA layer. 628 629 If unsure, say N. 630 631config PATA_MACIO 632 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" 633 depends on PPC_PMAC 634 help 635 Most IDE capable PowerMacs have IDE busses driven by a variant 636 of this controller which is part of the Apple chipset used on 637 most PowerMac models. Some models have multiple busses using 638 different chipsets, though generally, MacIO is one of them. 639 640config PATA_MARVELL 641 tristate "Marvell PATA support via legacy mode" 642 depends on PCI 643 help 644 This option enables limited support for the Marvell 88SE61xx ATA 645 controllers. If you wish to use only the SATA ports then select 646 the AHCI driver alone. If you wish to the use the PATA port or 647 both SATA and PATA include this driver. 648 649 If unsure, say N. 650 651config PATA_MPC52xx 652 tristate "Freescale MPC52xx SoC internal IDE" 653 depends on PPC_MPC52xx && PPC_BESTCOMM 654 select PPC_BESTCOMM_ATA 655 help 656 This option enables support for integrated IDE controller 657 of the Freescale MPC52xx SoC. 658 659 If unsure, say N. 660 661config PATA_NETCELL 662 tristate "NETCELL Revolution RAID support" 663 depends on PCI 664 help 665 This option enables support for the Netcell Revolution RAID 666 PATA controller. 667 668 If unsure, say N. 669 670config PATA_NINJA32 671 tristate "Ninja32/Delkin Cardbus ATA support" 672 depends on PCI 673 help 674 This option enables support for the Ninja32, Delkin and 675 possibly other brands of Cardbus ATA adapter 676 677 If unsure, say N. 678 679config PATA_NS87415 680 tristate "Nat Semi NS87415 PATA support" 681 depends on PCI 682 help 683 This option enables support for the National Semiconductor 684 NS87415 PCI-IDE controller. 685 686 If unsure, say N. 687 688config PATA_OLDPIIX 689 tristate "Intel PATA old PIIX support" 690 depends on PCI 691 help 692 This option enables support for early PIIX PATA support. 693 694 If unsure, say N. 695 696config PATA_OPTIDMA 697 tristate "OPTI FireStar PATA support (Very Experimental)" 698 depends on PCI 699 help 700 This option enables DMA/PIO support for the later OPTi 701 controllers found on some old motherboards and in some 702 laptops. 703 704 If unsure, say N. 705 706config PATA_PDC2027X 707 tristate "Promise PATA 2027x support" 708 depends on PCI 709 help 710 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. 711 712 If unsure, say N. 713 714config PATA_PDC_OLD 715 tristate "Older Promise PATA controller support" 716 depends on PCI 717 help 718 This option enables support for the Promise 20246, 20262, 20263, 719 20265 and 20267 adapters. 720 721 If unsure, say N. 722 723config PATA_RADISYS 724 tristate "RADISYS 82600 PATA support (Experimental)" 725 depends on PCI 726 help 727 This option enables support for the RADISYS 82600 728 PATA controllers via the new ATA layer 729 730 If unsure, say N. 731 732config PATA_RDC 733 tristate "RDC PATA support" 734 depends on PCI 735 help 736 This option enables basic support for the later RDC PATA controllers 737 controllers via the new ATA layer. For the RDC 1010, you need to 738 enable the IT821X driver instead. 739 740 If unsure, say N. 741 742config PATA_SC1200 743 tristate "SC1200 PATA support" 744 depends on PCI && (X86_32 || COMPILE_TEST) 745 help 746 This option enables support for the NatSemi/AMD SC1200 SoC 747 companion chip used with the Geode processor family. 748 749 If unsure, say N. 750 751config PATA_SCH 752 tristate "Intel SCH PATA support" 753 depends on PCI 754 help 755 This option enables support for Intel SCH PATA on the Intel 756 SCH (US15W, US15L, UL11L) series host controllers. 757 758 If unsure, say N. 759 760config PATA_SERVERWORKS 761 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" 762 depends on PCI 763 help 764 This option enables support for the Serverworks OSB4/CSB5/CSB6 and 765 HT1000 PATA controllers, via the new ATA layer. 766 767 If unsure, say N. 768 769config PATA_SIL680 770 tristate "CMD / Silicon Image 680 PATA support" 771 depends on PCI 772 help 773 This option enables support for CMD / Silicon Image 680 PATA. 774 775 If unsure, say N. 776 777config PATA_SIS 778 tristate "SiS PATA support" 779 depends on PCI 780 help 781 This option enables support for SiS PATA controllers 782 783 If unsure, say N. 784 785config PATA_TOSHIBA 786 tristate "Toshiba Piccolo support (Experimental)" 787 depends on PCI 788 help 789 Support for the Toshiba Piccolo controllers. Currently only the 790 primary channel is supported by this driver. 791 792 If unsure, say N. 793 794config PATA_TRIFLEX 795 tristate "Compaq Triflex PATA support" 796 depends on PCI 797 help 798 Enable support for the Compaq 'Triflex' IDE controller as found 799 on many Compaq Pentium-Pro systems, via the new ATA layer. 800 801 If unsure, say N. 802 803config PATA_VIA 804 tristate "VIA PATA support" 805 depends on PCI 806 help 807 This option enables support for the VIA PATA interfaces 808 found on the many VIA chipsets. 809 810 If unsure, say N. 811 812config PATA_PXA 813 tristate "PXA DMA-capable PATA support" 814 depends on ARCH_PXA 815 help 816 This option enables support for harddrive attached to PXA CPU's bus. 817 818 NOTE: This driver utilizes PXA DMA controller, in case your hardware 819 is not capable of doing MWDMA, use pata_platform instead. 820 821 If unsure, say N. 822 823config PATA_WINBOND 824 tristate "Winbond SL82C105 PATA support" 825 depends on PCI 826 help 827 This option enables support for SL82C105 PATA devices found in the 828 Netwinder and some other systems 829 830 If unsure, say N. 831 832endif # ATA_BMDMA 833 834comment "PIO-only SFF controllers" 835 836config PATA_AT32 837 tristate "Atmel AVR32 PATA support (Experimental)" 838 depends on AVR32 && PLATFORM_AT32AP 839 help 840 This option enables support for the IDE devices on the 841 Atmel AT32AP platform. 842 843 If unsure, say N. 844 845config PATA_AT91 846 tristate "PATA support for AT91SAM9260" 847 depends on ARM && SOC_AT91SAM9 848 help 849 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. 850 851 If unsure, say N. 852 853config PATA_CMD640_PCI 854 tristate "CMD640 PCI PATA support (Experimental)" 855 depends on PCI 856 help 857 This option enables support for the CMD640 PCI IDE 858 interface chip. Only the primary channel is currently 859 supported. 860 861 If unsure, say N. 862 863config PATA_ISAPNP 864 tristate "ISA Plug and Play PATA support" 865 depends on ISAPNP 866 help 867 This option enables support for ISA plug & play ATA 868 controllers such as those found on old soundcards. 869 870 If unsure, say N. 871 872config PATA_IXP4XX_CF 873 tristate "IXP4XX Compact Flash support" 874 depends on ARCH_IXP4XX 875 help 876 This option enables support for a Compact Flash connected on 877 the ixp4xx expansion bus. This driver had been written for 878 Loft/Avila boards in mind but can work with others. 879 880 If unsure, say N. 881 882config PATA_MPIIX 883 tristate "Intel PATA MPIIX support" 884 depends on PCI 885 help 886 This option enables support for MPIIX PATA support. 887 888 If unsure, say N. 889 890config PATA_NS87410 891 tristate "Nat Semi NS87410 PATA support" 892 depends on PCI 893 help 894 This option enables support for the National Semiconductor 895 NS87410 PCI-IDE controller. 896 897 If unsure, say N. 898 899config PATA_OPTI 900 tristate "OPTI621/6215 PATA support (Very Experimental)" 901 depends on PCI 902 help 903 This option enables full PIO support for the early Opti ATA 904 controllers found on some old motherboards. 905 906 If unsure, say N. 907 908config PATA_PALMLD 909 tristate "Palm LifeDrive PATA support" 910 depends on MACH_PALMLD 911 help 912 This option enables support for Palm LifeDrive's internal ATA 913 port via the new ATA layer. 914 915 If unsure, say N. 916 917config PATA_PCMCIA 918 tristate "PCMCIA PATA support" 919 depends on PCMCIA 920 help 921 This option enables support for PCMCIA ATA interfaces, including 922 compact flash card adapters via the new ATA layer. 923 924 If unsure, say N. 925 926config PATA_PLATFORM 927 tristate "Generic platform device PATA support" 928 depends on EXPERT || PPC || HAVE_PATA_PLATFORM 929 help 930 This option enables support for generic directly connected ATA 931 devices commonly found on embedded systems. 932 933 If unsure, say N. 934 935config PATA_OF_PLATFORM 936 tristate "OpenFirmware platform device PATA support" 937 depends on PATA_PLATFORM && OF 938 help 939 This option enables support for generic directly connected ATA 940 devices commonly found on embedded systems with OpenFirmware 941 bindings. 942 943 If unsure, say N. 944 945config PATA_QDI 946 tristate "QDI VLB PATA support" 947 depends on ISA 948 select PATA_LEGACY 949 help 950 Support for QDI 6500 and 6580 PATA controllers on VESA local bus. 951 952config PATA_RB532 953 tristate "RouterBoard 532 PATA CompactFlash support" 954 depends on MIKROTIK_RB532 955 help 956 This option enables support for the RouterBoard 532 957 PATA CompactFlash controller. 958 959 If unsure, say N. 960 961config PATA_RZ1000 962 tristate "PC Tech RZ1000 PATA support" 963 depends on PCI 964 help 965 This option enables basic support for the PC Tech RZ1000/1 966 PATA controllers via the new ATA layer 967 968 If unsure, say N. 969 970config PATA_SAMSUNG_CF 971 tristate "Samsung SoC PATA support" 972 depends on SAMSUNG_DEV_IDE 973 help 974 This option enables basic support for Samsung's S3C/S5P board 975 PATA controllers via the new ATA layer 976 977 If unsure, say N. 978 979config PATA_WINBOND_VLB 980 tristate "Winbond W83759A VLB PATA support (Experimental)" 981 depends on ISA 982 select PATA_LEGACY 983 help 984 Support for the Winbond W83759A controller on Vesa Local Bus 985 systems. 986 987comment "Generic fallback / legacy drivers" 988 989config PATA_ACPI 990 tristate "ACPI firmware driver for PATA" 991 depends on ATA_ACPI && ATA_BMDMA 992 help 993 This option enables an ACPI method driver which drives 994 motherboard PATA controller interfaces through the ACPI 995 firmware in the BIOS. This driver can sometimes handle 996 otherwise unsupported hardware. 997 998config ATA_GENERIC 999 tristate "Generic ATA support" 1000 depends on PCI && ATA_BMDMA 1001 help 1002 This option enables support for generic BIOS configured 1003 ATA controllers via the new ATA layer 1004 1005 If unsure, say N. 1006 1007config PATA_LEGACY 1008 tristate "Legacy ISA PATA support (Experimental)" 1009 depends on (ISA || PCI) 1010 help 1011 This option enables support for ISA/VLB/PCI bus legacy PATA 1012 ports and allows them to be accessed via the new ATA layer. 1013 1014 If unsure, say N. 1015 1016endif # ATA_SFF 1017endif # ATA 1018