1# 2# SATA/PATA driver configuration 3# 4 5config HAVE_PATA_PLATFORM 6 bool 7 help 8 This is an internal configuration node for any machine that 9 uses pata-platform driver to enable the relevant driver in the 10 configuration structure without having to submit endless patches 11 to update the PATA_PLATFORM entry. 12 13menuconfig ATA 14 tristate "Serial ATA and Parallel ATA drivers (libata)" 15 depends on HAS_IOMEM 16 depends on BLOCK 17 depends on !(M32R || M68K || S390) || BROKEN 18 select SCSI 19 select GLOB 20 ---help--- 21 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or 22 any other ATA device under Linux, say Y and make sure that you know 23 the name of your ATA host adapter (the card inside your computer 24 that "speaks" the ATA protocol, also called ATA controller), 25 because you will be asked for it. 26 27 NOTE: ATA enables basic SCSI support; *however*, 28 'SCSI disk support', 'SCSI tape support', or 29 'SCSI CDROM support' may also be needed, 30 depending on your hardware configuration. 31 32if ATA 33 34config ATA_NONSTANDARD 35 bool 36 default n 37 38config ATA_VERBOSE_ERROR 39 bool "Verbose ATA error reporting" 40 default y 41 help 42 This option adds parsing of ATA command descriptions and error bits 43 in libata kernel output, making it easier to interpret. 44 This option will enlarge the kernel by approx. 6KB. Disable it only 45 if kernel size is more important than ease of debugging. 46 47 If unsure, say Y. 48 49config ATA_ACPI 50 bool "ATA ACPI Support" 51 depends on ACPI 52 default y 53 help 54 This option adds support for ATA-related ACPI objects. 55 These ACPI objects add the ability to retrieve taskfiles 56 from the ACPI BIOS and write them to the disk controller. 57 These objects may be related to performance, security, 58 power management, or other areas. 59 You can disable this at kernel boot time by using the 60 option libata.noacpi=1 61 62config SATA_ZPODD 63 bool "SATA Zero Power Optical Disc Drive (ZPODD) support" 64 depends on ATA_ACPI && PM 65 default n 66 help 67 This option adds support for SATA Zero Power Optical Disc 68 Drive (ZPODD). It requires both the ODD and the platform 69 support, and if enabled, will automatically power on/off the 70 ODD when certain condition is satisfied. This does not impact 71 end user's experience of the ODD, only power is saved when 72 the ODD is not in use (i.e. no disc inside). 73 74 If unsure, say N. 75 76config SATA_PMP 77 bool "SATA Port Multiplier support" 78 default y 79 help 80 This option adds support for SATA Port Multipliers 81 (the SATA version of an ethernet hub, or SAS expander). 82 83comment "Controllers with non-SFF native interface" 84 85config SATA_AHCI 86 tristate "AHCI SATA support" 87 depends on PCI 88 help 89 This option enables support for AHCI Serial ATA. 90 91 If unsure, say N. 92 93config SATA_AHCI_PLATFORM 94 tristate "Platform AHCI SATA support" 95 help 96 This option enables support for Platform AHCI Serial ATA 97 controllers. 98 99 If unsure, say N. 100 101config AHCI_BRCM 102 tristate "Broadcom AHCI SATA support" 103 depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP 104 help 105 This option enables support for the AHCI SATA3 controller found on 106 Broadcom SoC's. 107 108 If unsure, say N. 109 110config AHCI_DA850 111 tristate "DaVinci DA850 AHCI SATA support" 112 depends on ARCH_DAVINCI_DA850 113 help 114 This option enables support for the DaVinci DA850 SoC's 115 onboard AHCI SATA. 116 117 If unsure, say N. 118 119config AHCI_ST 120 tristate "ST AHCI SATA support" 121 depends on ARCH_STI 122 help 123 This option enables support for ST AHCI SATA controller. 124 125 If unsure, say N. 126 127config AHCI_IMX 128 tristate "Freescale i.MX AHCI SATA support" 129 depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST) 130 help 131 This option enables support for the Freescale i.MX SoC's 132 onboard AHCI SATA. 133 134 If unsure, say N. 135 136config AHCI_CEVA 137 tristate "CEVA AHCI SATA support" 138 depends on OF 139 help 140 This option enables support for the CEVA AHCI SATA. 141 It can be found on the Xilinx Zynq UltraScale+ MPSoC. 142 143 If unsure, say N. 144 145config AHCI_MVEBU 146 tristate "Marvell EBU AHCI SATA support" 147 depends on ARCH_MVEBU 148 help 149 This option enables support for the Marvebu EBU SoC's 150 onboard AHCI SATA. 151 152 If unsure, say N. 153 154config AHCI_OCTEON 155 tristate "Cavium Octeon Soc Serial ATA" 156 depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC 157 default y 158 help 159 This option enables support for Cavium Octeon SoC Serial ATA. 160 161 If unsure, say N. 162 163config AHCI_SUNXI 164 tristate "Allwinner sunxi AHCI SATA support" 165 depends on ARCH_SUNXI 166 help 167 This option enables support for the Allwinner sunxi SoC's 168 onboard AHCI SATA. 169 170 If unsure, say N. 171 172config AHCI_TEGRA 173 tristate "NVIDIA Tegra124 AHCI SATA support" 174 depends on ARCH_TEGRA 175 help 176 This option enables support for the NVIDIA Tegra124 SoC's 177 onboard AHCI SATA. 178 179 If unsure, say N. 180 181config AHCI_XGENE 182 tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support" 183 depends on PHY_XGENE 184 help 185 This option enables support for APM X-Gene SoC SATA host controller. 186 187config AHCI_QORIQ 188 tristate "Freescale QorIQ AHCI SATA support" 189 depends on OF 190 help 191 This option enables support for the Freescale QorIQ AHCI SoC's 192 onboard AHCI SATA. 193 194 If unsure, say N. 195 196config SATA_FSL 197 tristate "Freescale 3.0Gbps SATA support" 198 depends on FSL_SOC 199 help 200 This option enables support for Freescale 3.0Gbps SATA controller. 201 It can be found on MPC837x and MPC8315. 202 203 If unsure, say N. 204 205config SATA_AHCI_SEATTLE 206 tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support" 207 depends on ARCH_SEATTLE 208 help 209 This option enables support for AMD Seattle SATA host controller. 210 211 If unsure, say N 212 213config SATA_INIC162X 214 tristate "Initio 162x SATA support (Very Experimental)" 215 depends on PCI 216 help 217 This option enables support for Initio 162x Serial ATA. 218 219config SATA_ACARD_AHCI 220 tristate "ACard AHCI variant (ATP 8620)" 221 depends on PCI 222 help 223 This option enables support for Acard. 224 225 If unsure, say N. 226 227config SATA_SIL24 228 tristate "Silicon Image 3124/3132 SATA support" 229 depends on PCI 230 help 231 This option enables support for Silicon Image 3124/3132 Serial ATA. 232 233 If unsure, say N. 234 235config ATA_SFF 236 bool "ATA SFF support (for legacy IDE and PATA)" 237 default y 238 help 239 This option adds support for ATA controllers with SFF 240 compliant or similar programming interface. 241 242 SFF is the legacy IDE interface that has been around since 243 the dawn of time. Almost all PATA controllers have an 244 SFF interface. Many SATA controllers have an SFF interface 245 when configured into a legacy compatibility mode. 246 247 For users with exclusively modern controllers like AHCI, 248 Silicon Image 3124, or Marvell 6440, you may choose to 249 disable this unneeded SFF support. 250 251 If unsure, say Y. 252 253if ATA_SFF 254 255comment "SFF controllers with custom DMA interface" 256 257config PDC_ADMA 258 tristate "Pacific Digital ADMA support" 259 depends on PCI 260 help 261 This option enables support for Pacific Digital ADMA controllers 262 263 If unsure, say N. 264 265config PATA_OCTEON_CF 266 tristate "OCTEON Boot Bus Compact Flash support" 267 depends on CAVIUM_OCTEON_SOC 268 help 269 This option enables a polled compact flash driver for use with 270 compact flash cards attached to the OCTEON boot bus. 271 272 If unsure, say N. 273 274config SATA_QSTOR 275 tristate "Pacific Digital SATA QStor support" 276 depends on PCI 277 help 278 This option enables support for Pacific Digital Serial ATA QStor. 279 280 If unsure, say N. 281 282config SATA_SX4 283 tristate "Promise SATA SX4 support (Experimental)" 284 depends on PCI 285 help 286 This option enables support for Promise Serial ATA SX4. 287 288 If unsure, say N. 289 290config ATA_BMDMA 291 bool "ATA BMDMA support" 292 default y 293 help 294 This option adds support for SFF ATA controllers with BMDMA 295 capability. BMDMA stands for bus-master DMA and is the 296 de facto DMA interface for SFF controllers. 297 298 If unsure, say Y. 299 300if ATA_BMDMA 301 302comment "SATA SFF controllers with BMDMA" 303 304config ATA_PIIX 305 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" 306 depends on PCI 307 help 308 This option enables support for ICH5/6/7/8 Serial ATA 309 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series 310 host controllers. 311 312 If unsure, say N. 313 314config SATA_DWC 315 tristate "DesignWare Cores SATA support" 316 depends on DMADEVICES 317 select GENERIC_PHY 318 help 319 This option enables support for the on-chip SATA controller of the 320 AppliedMicro processor 460EX. 321 322 If unsure, say N. 323 324config SATA_DWC_OLD_DMA 325 bool "Support old device trees" 326 depends on SATA_DWC 327 select DW_DMAC_CORE 328 default y if 460EX 329 help 330 This option enables support for old device trees without the 331 "dmas" property. 332 333config SATA_DWC_DEBUG 334 bool "Debugging driver version" 335 depends on SATA_DWC 336 help 337 This option enables debugging output in the driver. 338 339config SATA_DWC_VDEBUG 340 bool "Verbose debug output" 341 depends on SATA_DWC_DEBUG 342 help 343 This option enables the taskfile dumping and NCQ debugging. 344 345config SATA_HIGHBANK 346 tristate "Calxeda Highbank SATA support" 347 depends on ARCH_HIGHBANK || COMPILE_TEST 348 help 349 This option enables support for the Calxeda Highbank SoC's 350 onboard SATA. 351 352 If unsure, say N. 353 354config SATA_MV 355 tristate "Marvell SATA support" 356 depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \ 357 ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST 358 select GENERIC_PHY 359 help 360 This option enables support for the Marvell Serial ATA family. 361 Currently supports 88SX[56]0[48][01] PCI(-X) chips, 362 as well as the newer [67]042 PCI-X/PCIe and SOC devices. 363 364 If unsure, say N. 365 366config SATA_NV 367 tristate "NVIDIA SATA support" 368 depends on PCI 369 help 370 This option enables support for NVIDIA Serial ATA. 371 372 If unsure, say N. 373 374config SATA_PROMISE 375 tristate "Promise SATA TX2/TX4 support" 376 depends on PCI 377 help 378 This option enables support for Promise Serial ATA TX2/TX4. 379 380 If unsure, say N. 381 382config SATA_RCAR 383 tristate "Renesas R-Car SATA support" 384 depends on ARCH_RENESAS || COMPILE_TEST 385 help 386 This option enables support for Renesas R-Car Serial ATA. 387 388 If unsure, say N. 389 390config SATA_SIL 391 tristate "Silicon Image SATA support" 392 depends on PCI 393 help 394 This option enables support for Silicon Image Serial ATA. 395 396 If unsure, say N. 397 398config SATA_SIS 399 tristate "SiS 964/965/966/180 SATA support" 400 depends on PCI 401 select PATA_SIS 402 help 403 This option enables support for SiS Serial ATA on 404 SiS 964/965/966/180 and Parallel ATA on SiS 180. 405 The PATA support for SiS 180 requires additionally to 406 enable the PATA_SIS driver in the config. 407 If unsure, say N. 408 409config SATA_SVW 410 tristate "ServerWorks Frodo / Apple K2 SATA support" 411 depends on PCI 412 help 413 This option enables support for Broadcom/Serverworks/Apple K2 414 SATA support. 415 416 If unsure, say N. 417 418config SATA_ULI 419 tristate "ULi Electronics SATA support" 420 depends on PCI 421 help 422 This option enables support for ULi Electronics SATA. 423 424 If unsure, say N. 425 426config SATA_VIA 427 tristate "VIA SATA support" 428 depends on PCI 429 help 430 This option enables support for VIA Serial ATA. 431 432 If unsure, say N. 433 434config SATA_VITESSE 435 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" 436 depends on PCI 437 help 438 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. 439 440 If unsure, say N. 441 442comment "PATA SFF controllers with BMDMA" 443 444config PATA_ALI 445 tristate "ALi PATA support" 446 depends on PCI 447 help 448 This option enables support for the ALi ATA interfaces 449 found on the many ALi chipsets. 450 451 If unsure, say N. 452 453config PATA_AMD 454 tristate "AMD/NVidia PATA support" 455 depends on PCI 456 help 457 This option enables support for the AMD and NVidia PATA 458 interfaces found on the chipsets for Athlon/Athlon64. 459 460 If unsure, say N. 461 462config PATA_ARASAN_CF 463 tristate "ARASAN CompactFlash PATA Controller Support" 464 depends on ARCH_SPEAR13XX || COMPILE_TEST 465 depends on DMADEVICES 466 select DMA_ENGINE 467 help 468 Say Y here to support the ARASAN CompactFlash PATA controller 469 470config PATA_ARTOP 471 tristate "ARTOP 6210/6260 PATA support" 472 depends on PCI 473 help 474 This option enables support for ARTOP PATA controllers. 475 476 If unsure, say N. 477 478config PATA_ATIIXP 479 tristate "ATI PATA support" 480 depends on PCI 481 help 482 This option enables support for the ATI ATA interfaces 483 found on the many ATI chipsets. 484 485 If unsure, say N. 486 487config PATA_ATP867X 488 tristate "ARTOP/Acard ATP867X PATA support" 489 depends on PCI 490 help 491 This option enables support for ARTOP/Acard ATP867X PATA 492 controllers. 493 494 If unsure, say N. 495 496config PATA_BF54X 497 tristate "Blackfin 54x ATAPI support" 498 depends on BF542 || BF548 || BF549 499 help 500 This option enables support for the built-in ATAPI controller on 501 Blackfin 54x family chips. 502 503 If unsure, say N. 504 505config PATA_CMD64X 506 tristate "CMD64x PATA support" 507 depends on PCI 508 help 509 This option enables support for the CMD64x series chips 510 except for the CMD640. 511 512 If unsure, say N. 513 514config PATA_CS5520 515 tristate "CS5510/5520 PATA support" 516 depends on PCI && (X86_32 || COMPILE_TEST) 517 help 518 This option enables support for the Cyrix 5510/5520 519 companion chip used with the MediaGX/Geode processor family. 520 521 If unsure, say N. 522 523config PATA_CS5530 524 tristate "CS5530 PATA support" 525 depends on PCI && (X86_32 || COMPILE_TEST) 526 help 527 This option enables support for the Cyrix/NatSemi/AMD CS5530 528 companion chip used with the MediaGX/Geode processor family. 529 530 If unsure, say N. 531 532config PATA_CS5535 533 tristate "CS5535 PATA support (Experimental)" 534 depends on PCI && X86_32 535 help 536 This option enables support for the NatSemi/AMD CS5535 537 companion chip used with the Geode processor family. 538 539 If unsure, say N. 540 541config PATA_CS5536 542 tristate "CS5536 PATA support" 543 depends on PCI && (X86_32 || MIPS || COMPILE_TEST) 544 help 545 This option enables support for the AMD CS5536 546 companion chip used with the Geode LX processor family. 547 548 If unsure, say N. 549 550config PATA_CYPRESS 551 tristate "Cypress CY82C693 PATA support (Very Experimental)" 552 depends on PCI 553 help 554 This option enables support for the Cypress/Contaq CY82C693 555 chipset found in some Alpha systems 556 557 If unsure, say N. 558 559config PATA_EFAR 560 tristate "EFAR SLC90E66 support" 561 depends on PCI 562 help 563 This option enables support for the EFAR SLC90E66 564 IDE controller found on some older machines. 565 566 If unsure, say N. 567 568config PATA_EP93XX 569 tristate "Cirrus Logic EP93xx PATA support" 570 depends on ARCH_EP93XX 571 help 572 This option enables support for the PATA controller in 573 the Cirrus Logic EP9312 and EP9315 ARM CPU. 574 575 If unsure, say N. 576 577config PATA_HPT366 578 tristate "HPT 366/368 PATA support" 579 depends on PCI 580 help 581 This option enables support for the HPT 366 and 368 582 PATA controllers via the new ATA layer. 583 584 If unsure, say N. 585 586config PATA_HPT37X 587 tristate "HPT 370/370A/371/372/374/302 PATA support" 588 depends on PCI 589 help 590 This option enables support for the majority of the later HPT 591 PATA controllers via the new ATA layer. 592 593 If unsure, say N. 594 595config PATA_HPT3X2N 596 tristate "HPT 371N/372N/302N PATA support" 597 depends on PCI 598 help 599 This option enables support for the N variant HPT PATA 600 controllers via the new ATA layer. 601 602 If unsure, say N. 603 604config PATA_HPT3X3 605 tristate "HPT 343/363 PATA support" 606 depends on PCI 607 help 608 This option enables support for the HPT 343/363 609 PATA controllers via the new ATA layer 610 611 If unsure, say N. 612 613config PATA_HPT3X3_DMA 614 bool "HPT 343/363 DMA support" 615 depends on PATA_HPT3X3 616 help 617 This option enables DMA support for the HPT343/363 618 controllers. Enable with care as there are still some 619 problems with DMA on this chipset. 620 621config PATA_ICSIDE 622 tristate "Acorn ICS PATA support" 623 depends on ARM && ARCH_ACORN 624 help 625 On Acorn systems, say Y here if you wish to use the ICS PATA 626 interface card. This is not required for ICS partition support. 627 If you are unsure, say N to this. 628 629config PATA_IMX 630 tristate "PATA support for Freescale iMX" 631 depends on ARCH_MXC 632 help 633 This option enables support for the PATA host available on Freescale 634 iMX SoCs. 635 636 If unsure, say N. 637 638config PATA_IT8213 639 tristate "IT8213 PATA support (Experimental)" 640 depends on PCI 641 help 642 This option enables support for the ITE 821 PATA 643 controllers via the new ATA layer. 644 645 If unsure, say N. 646 647config PATA_IT821X 648 tristate "IT8211/2 PATA support" 649 depends on PCI 650 help 651 This option enables support for the ITE 8211 and 8212 652 PATA controllers via the new ATA layer, including RAID 653 mode. 654 655 If unsure, say N. 656 657config PATA_JMICRON 658 tristate "JMicron PATA support" 659 depends on PCI 660 help 661 Enable support for the JMicron IDE controller, via the new 662 ATA layer. 663 664 If unsure, say N. 665 666config PATA_MACIO 667 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" 668 depends on PPC_PMAC 669 help 670 Most IDE capable PowerMacs have IDE busses driven by a variant 671 of this controller which is part of the Apple chipset used on 672 most PowerMac models. Some models have multiple busses using 673 different chipsets, though generally, MacIO is one of them. 674 675config PATA_MARVELL 676 tristate "Marvell PATA support via legacy mode" 677 depends on PCI 678 help 679 This option enables limited support for the Marvell 88SE61xx ATA 680 controllers. If you wish to use only the SATA ports then select 681 the AHCI driver alone. If you wish to the use the PATA port or 682 both SATA and PATA include this driver. 683 684 If unsure, say N. 685 686config PATA_MPC52xx 687 tristate "Freescale MPC52xx SoC internal IDE" 688 depends on PPC_MPC52xx && PPC_BESTCOMM 689 select PPC_BESTCOMM_ATA 690 help 691 This option enables support for integrated IDE controller 692 of the Freescale MPC52xx SoC. 693 694 If unsure, say N. 695 696config PATA_NETCELL 697 tristate "NETCELL Revolution RAID support" 698 depends on PCI 699 help 700 This option enables support for the Netcell Revolution RAID 701 PATA controller. 702 703 If unsure, say N. 704 705config PATA_NINJA32 706 tristate "Ninja32/Delkin Cardbus ATA support" 707 depends on PCI 708 help 709 This option enables support for the Ninja32, Delkin and 710 possibly other brands of Cardbus ATA adapter 711 712 If unsure, say N. 713 714config PATA_NS87415 715 tristate "Nat Semi NS87415 PATA support" 716 depends on PCI 717 help 718 This option enables support for the National Semiconductor 719 NS87415 PCI-IDE controller. 720 721 If unsure, say N. 722 723config PATA_OLDPIIX 724 tristate "Intel PATA old PIIX support" 725 depends on PCI 726 help 727 This option enables support for early PIIX PATA support. 728 729 If unsure, say N. 730 731config PATA_OPTIDMA 732 tristate "OPTI FireStar PATA support (Very Experimental)" 733 depends on PCI 734 help 735 This option enables DMA/PIO support for the later OPTi 736 controllers found on some old motherboards and in some 737 laptops. 738 739 If unsure, say N. 740 741config PATA_PDC2027X 742 tristate "Promise PATA 2027x support" 743 depends on PCI 744 help 745 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. 746 747 If unsure, say N. 748 749config PATA_PDC_OLD 750 tristate "Older Promise PATA controller support" 751 depends on PCI 752 help 753 This option enables support for the Promise 20246, 20262, 20263, 754 20265 and 20267 adapters. 755 756 If unsure, say N. 757 758config PATA_RADISYS 759 tristate "RADISYS 82600 PATA support (Experimental)" 760 depends on PCI 761 help 762 This option enables support for the RADISYS 82600 763 PATA controllers via the new ATA layer 764 765 If unsure, say N. 766 767config PATA_RDC 768 tristate "RDC PATA support" 769 depends on PCI 770 help 771 This option enables basic support for the later RDC PATA controllers 772 controllers via the new ATA layer. For the RDC 1010, you need to 773 enable the IT821X driver instead. 774 775 If unsure, say N. 776 777config PATA_SC1200 778 tristate "SC1200 PATA support" 779 depends on PCI && (X86_32 || COMPILE_TEST) 780 help 781 This option enables support for the NatSemi/AMD SC1200 SoC 782 companion chip used with the Geode processor family. 783 784 If unsure, say N. 785 786config PATA_SCH 787 tristate "Intel SCH PATA support" 788 depends on PCI 789 help 790 This option enables support for Intel SCH PATA on the Intel 791 SCH (US15W, US15L, UL11L) series host controllers. 792 793 If unsure, say N. 794 795config PATA_SERVERWORKS 796 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" 797 depends on PCI 798 help 799 This option enables support for the Serverworks OSB4/CSB5/CSB6 and 800 HT1000 PATA controllers, via the new ATA layer. 801 802 If unsure, say N. 803 804config PATA_SIL680 805 tristate "CMD / Silicon Image 680 PATA support" 806 depends on PCI 807 help 808 This option enables support for CMD / Silicon Image 680 PATA. 809 810 If unsure, say N. 811 812config PATA_SIS 813 tristate "SiS PATA support" 814 depends on PCI 815 help 816 This option enables support for SiS PATA controllers 817 818 If unsure, say N. 819 820config PATA_TOSHIBA 821 tristate "Toshiba Piccolo support (Experimental)" 822 depends on PCI 823 help 824 Support for the Toshiba Piccolo controllers. Currently only the 825 primary channel is supported by this driver. 826 827 If unsure, say N. 828 829config PATA_TRIFLEX 830 tristate "Compaq Triflex PATA support" 831 depends on PCI 832 help 833 Enable support for the Compaq 'Triflex' IDE controller as found 834 on many Compaq Pentium-Pro systems, via the new ATA layer. 835 836 If unsure, say N. 837 838config PATA_VIA 839 tristate "VIA PATA support" 840 depends on PCI 841 help 842 This option enables support for the VIA PATA interfaces 843 found on the many VIA chipsets. 844 845 If unsure, say N. 846 847config PATA_PXA 848 tristate "PXA DMA-capable PATA support" 849 depends on ARCH_PXA 850 help 851 This option enables support for harddrive attached to PXA CPU's bus. 852 853 NOTE: This driver utilizes PXA DMA controller, in case your hardware 854 is not capable of doing MWDMA, use pata_platform instead. 855 856 If unsure, say N. 857 858config PATA_WINBOND 859 tristate "Winbond SL82C105 PATA support" 860 depends on PCI 861 help 862 This option enables support for SL82C105 PATA devices found in the 863 Netwinder and some other systems 864 865 If unsure, say N. 866 867endif # ATA_BMDMA 868 869comment "PIO-only SFF controllers" 870 871config PATA_AT32 872 tristate "Atmel AVR32 PATA support (Experimental)" 873 depends on AVR32 && PLATFORM_AT32AP 874 help 875 This option enables support for the IDE devices on the 876 Atmel AT32AP platform. 877 878 If unsure, say N. 879 880config PATA_AT91 881 tristate "PATA support for AT91SAM9260" 882 depends on ARM && SOC_AT91SAM9 883 help 884 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. 885 886 If unsure, say N. 887 888config PATA_CMD640_PCI 889 tristate "CMD640 PCI PATA support (Experimental)" 890 depends on PCI 891 help 892 This option enables support for the CMD640 PCI IDE 893 interface chip. Only the primary channel is currently 894 supported. 895 896 If unsure, say N. 897 898config PATA_ISAPNP 899 tristate "ISA Plug and Play PATA support" 900 depends on ISAPNP 901 help 902 This option enables support for ISA plug & play ATA 903 controllers such as those found on old soundcards. 904 905 If unsure, say N. 906 907config PATA_IXP4XX_CF 908 tristate "IXP4XX Compact Flash support" 909 depends on ARCH_IXP4XX 910 help 911 This option enables support for a Compact Flash connected on 912 the ixp4xx expansion bus. This driver had been written for 913 Loft/Avila boards in mind but can work with others. 914 915 If unsure, say N. 916 917config PATA_MPIIX 918 tristate "Intel PATA MPIIX support" 919 depends on PCI 920 help 921 This option enables support for MPIIX PATA support. 922 923 If unsure, say N. 924 925config PATA_NS87410 926 tristate "Nat Semi NS87410 PATA support" 927 depends on PCI 928 help 929 This option enables support for the National Semiconductor 930 NS87410 PCI-IDE controller. 931 932 If unsure, say N. 933 934config PATA_OPTI 935 tristate "OPTI621/6215 PATA support (Very Experimental)" 936 depends on PCI 937 help 938 This option enables full PIO support for the early Opti ATA 939 controllers found on some old motherboards. 940 941 If unsure, say N. 942 943config PATA_PALMLD 944 tristate "Palm LifeDrive PATA support" 945 depends on MACH_PALMLD 946 help 947 This option enables support for Palm LifeDrive's internal ATA 948 port via the new ATA layer. 949 950 If unsure, say N. 951 952config PATA_PCMCIA 953 tristate "PCMCIA PATA support" 954 depends on PCMCIA 955 help 956 This option enables support for PCMCIA ATA interfaces, including 957 compact flash card adapters via the new ATA layer. 958 959 If unsure, say N. 960 961config PATA_PLATFORM 962 tristate "Generic platform device PATA support" 963 depends on EXPERT || PPC || HAVE_PATA_PLATFORM 964 help 965 This option enables support for generic directly connected ATA 966 devices commonly found on embedded systems. 967 968 If unsure, say N. 969 970config PATA_OF_PLATFORM 971 tristate "OpenFirmware platform device PATA support" 972 depends on PATA_PLATFORM && OF 973 help 974 This option enables support for generic directly connected ATA 975 devices commonly found on embedded systems with OpenFirmware 976 bindings. 977 978 If unsure, say N. 979 980config PATA_QDI 981 tristate "QDI VLB PATA support" 982 depends on ISA 983 select PATA_LEGACY 984 help 985 Support for QDI 6500 and 6580 PATA controllers on VESA local bus. 986 987config PATA_RB532 988 tristate "RouterBoard 532 PATA CompactFlash support" 989 depends on MIKROTIK_RB532 990 help 991 This option enables support for the RouterBoard 532 992 PATA CompactFlash controller. 993 994 If unsure, say N. 995 996config PATA_RZ1000 997 tristate "PC Tech RZ1000 PATA support" 998 depends on PCI 999 help 1000 This option enables basic support for the PC Tech RZ1000/1 1001 PATA controllers via the new ATA layer 1002 1003 If unsure, say N. 1004 1005config PATA_SAMSUNG_CF 1006 tristate "Samsung SoC PATA support" 1007 depends on SAMSUNG_DEV_IDE 1008 help 1009 This option enables basic support for Samsung's S3C/S5P board 1010 PATA controllers via the new ATA layer 1011 1012 If unsure, say N. 1013 1014config PATA_WINBOND_VLB 1015 tristate "Winbond W83759A VLB PATA support (Experimental)" 1016 depends on ISA 1017 select PATA_LEGACY 1018 help 1019 Support for the Winbond W83759A controller on Vesa Local Bus 1020 systems. 1021 1022comment "Generic fallback / legacy drivers" 1023 1024config PATA_ACPI 1025 tristate "ACPI firmware driver for PATA" 1026 depends on ATA_ACPI && ATA_BMDMA 1027 help 1028 This option enables an ACPI method driver which drives 1029 motherboard PATA controller interfaces through the ACPI 1030 firmware in the BIOS. This driver can sometimes handle 1031 otherwise unsupported hardware. 1032 1033config ATA_GENERIC 1034 tristate "Generic ATA support" 1035 depends on PCI && ATA_BMDMA 1036 help 1037 This option enables support for generic BIOS configured 1038 ATA controllers via the new ATA layer 1039 1040 If unsure, say N. 1041 1042config PATA_LEGACY 1043 tristate "Legacy ISA PATA support (Experimental)" 1044 depends on (ISA || PCI) 1045 help 1046 This option enables support for ISA/VLB/PCI bus legacy PATA 1047 ports and allows them to be accessed via the new ATA layer. 1048 1049 If unsure, say N. 1050 1051endif # ATA_SFF 1052endif # ATA 1053