1# 2# SATA/PATA driver configuration 3# 4 5menuconfig ATA 6 tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" 7 depends on HAS_IOMEM 8 depends on BLOCK 9 depends on !(M32R || M68K) || BROKEN 10 depends on !SUN4 || BROKEN 11 select SCSI 12 ---help--- 13 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or 14 any other ATA device under Linux, say Y and make sure that you know 15 the name of your ATA host adapter (the card inside your computer 16 that "speaks" the ATA protocol, also called ATA controller), 17 because you will be asked for it. 18 19 NOTE: ATA enables basic SCSI support; *however*, 20 'SCSI disk support', 'SCSI tape support', or 21 'SCSI CDROM support' may also be needed, 22 depending on your hardware configuration. 23 24if ATA 25 26config ATA_NONSTANDARD 27 bool 28 default n 29 30config ATA_ACPI 31 bool 32 depends on ACPI && PCI 33 default y 34 help 35 This option adds support for ATA-related ACPI objects. 36 These ACPI objects add the ability to retrieve taskfiles 37 from the ACPI BIOS and write them to the disk controller. 38 These objects may be related to performance, security, 39 power management, or other areas. 40 You can disable this at kernel boot time by using the 41 option libata.noacpi=1 42 43config SATA_AHCI 44 tristate "AHCI SATA support" 45 depends on PCI 46 help 47 This option enables support for AHCI Serial ATA. 48 49 If unsure, say N. 50 51config SATA_SVW 52 tristate "ServerWorks Frodo / Apple K2 SATA support" 53 depends on PCI 54 help 55 This option enables support for Broadcom/Serverworks/Apple K2 56 SATA support. 57 58 If unsure, say N. 59 60config ATA_PIIX 61 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" 62 depends on PCI 63 help 64 This option enables support for ICH5/6/7/8 Serial ATA 65 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series 66 host controllers. 67 68 If unsure, say N. 69 70config SATA_MV 71 tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" 72 depends on PCI && EXPERIMENTAL 73 help 74 This option enables support for the Marvell Serial ATA family. 75 Currently supports 88SX[56]0[48][01] chips. 76 77 If unsure, say N. 78 79config SATA_NV 80 tristate "NVIDIA SATA support" 81 depends on PCI 82 help 83 This option enables support for NVIDIA Serial ATA. 84 85 If unsure, say N. 86 87config PDC_ADMA 88 tristate "Pacific Digital ADMA support" 89 depends on PCI 90 help 91 This option enables support for Pacific Digital ADMA controllers 92 93 If unsure, say N. 94 95config SATA_QSTOR 96 tristate "Pacific Digital SATA QStor support" 97 depends on PCI 98 help 99 This option enables support for Pacific Digital Serial ATA QStor. 100 101 If unsure, say N. 102 103config SATA_PROMISE 104 tristate "Promise SATA TX2/TX4 support" 105 depends on PCI 106 help 107 This option enables support for Promise Serial ATA TX2/TX4. 108 109 If unsure, say N. 110 111config SATA_SX4 112 tristate "Promise SATA SX4 support" 113 depends on PCI && EXPERIMENTAL 114 help 115 This option enables support for Promise Serial ATA SX4. 116 117 If unsure, say N. 118 119config SATA_SIL 120 tristate "Silicon Image SATA support" 121 depends on PCI 122 help 123 This option enables support for Silicon Image Serial ATA. 124 125 If unsure, say N. 126 127config SATA_SIL24 128 tristate "Silicon Image 3124/3132 SATA support" 129 depends on PCI 130 help 131 This option enables support for Silicon Image 3124/3132 Serial ATA. 132 133 If unsure, say N. 134 135config SATA_SIS 136 tristate "SiS 964/965/966/180 SATA support" 137 depends on PCI 138 select PATA_SIS 139 help 140 This option enables support for SiS Serial ATA on 141 SiS 964/965/966/180 and Parallel ATA on SiS 180. 142 The PATA support for SiS 180 requires additionally to 143 enable the PATA_SIS driver in the config. 144 If unsure, say N. 145 146config SATA_ULI 147 tristate "ULi Electronics SATA support" 148 depends on PCI 149 help 150 This option enables support for ULi Electronics SATA. 151 152 If unsure, say N. 153 154config SATA_VIA 155 tristate "VIA SATA support" 156 depends on PCI 157 help 158 This option enables support for VIA Serial ATA. 159 160 If unsure, say N. 161 162config SATA_VITESSE 163 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" 164 depends on PCI 165 help 166 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. 167 168 If unsure, say N. 169 170config SATA_INIC162X 171 tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)" 172 depends on PCI && EXPERIMENTAL 173 help 174 This option enables support for Initio 162x Serial ATA. 175 176config PATA_ALI 177 tristate "ALi PATA support (Experimental)" 178 depends on PCI && EXPERIMENTAL 179 help 180 This option enables support for the ALi ATA interfaces 181 found on the many ALi chipsets. 182 183 If unsure, say N. 184 185config PATA_AMD 186 tristate "AMD/NVidia PATA support" 187 depends on PCI 188 help 189 This option enables support for the AMD and NVidia PATA 190 interfaces found on the chipsets for Athlon/Athlon64. 191 192 If unsure, say N. 193 194config PATA_ARTOP 195 tristate "ARTOP 6210/6260 PATA support (Experimental)" 196 depends on PCI && EXPERIMENTAL 197 help 198 This option enables support for ARTOP PATA controllers. 199 200 If unsure, say N. 201 202config PATA_ATIIXP 203 tristate "ATI PATA support (Experimental)" 204 depends on PCI && EXPERIMENTAL 205 help 206 This option enables support for the ATI ATA interfaces 207 found on the many ATI chipsets. 208 209 If unsure, say N. 210 211config PATA_CMD640_PCI 212 tristate "CMD640 PCI PATA support (Very Experimental)" 213 depends on PCI && EXPERIMENTAL 214 help 215 This option enables support for the CMD640 PCI IDE 216 interface chip. Only the primary channel is currently 217 supported. 218 219 If unsure, say N. 220 221config PATA_CMD64X 222 tristate "CMD64x PATA support (Very Experimental)" 223 depends on PCI&& EXPERIMENTAL 224 help 225 This option enables support for the CMD64x series chips 226 except for the CMD640. 227 228 If unsure, say N. 229 230config PATA_CS5520 231 tristate "CS5510/5520 PATA support" 232 depends on PCI 233 help 234 This option enables support for the Cyrix 5510/5520 235 companion chip used with the MediaGX/Geode processor family. 236 237 If unsure, say N. 238 239config PATA_CS5530 240 tristate "CS5530 PATA support (Experimental)" 241 depends on PCI && EXPERIMENTAL 242 help 243 This option enables support for the Cyrix/NatSemi/AMD CS5530 244 companion chip used with the MediaGX/Geode processor family. 245 246 If unsure, say N. 247 248config PATA_CS5535 249 tristate "CS5535 PATA support (Experimental)" 250 depends on PCI && X86 && !X86_64 && EXPERIMENTAL 251 help 252 This option enables support for the NatSemi/AMD CS5535 253 companion chip used with the Geode processor family. 254 255 If unsure, say N. 256 257config PATA_CYPRESS 258 tristate "Cypress CY82C693 PATA support (Very Experimental)" 259 depends on PCI && EXPERIMENTAL 260 help 261 This option enables support for the Cypress/Contaq CY82C693 262 chipset found in some Alpha systems 263 264 If unsure, say N. 265 266config PATA_EFAR 267 tristate "EFAR SLC90E66 support" 268 depends on PCI 269 help 270 This option enables support for the EFAR SLC90E66 271 IDE controller found on some older machines. 272 273 If unsure, say N. 274 275config ATA_GENERIC 276 tristate "Generic ATA support" 277 depends on PCI 278 help 279 This option enables support for generic BIOS configured 280 ATA controllers via the new ATA layer 281 282 If unsure, say N. 283 284config PATA_HPT366 285 tristate "HPT 366/368 PATA support (Experimental)" 286 depends on PCI && EXPERIMENTAL 287 help 288 This option enables support for the HPT 366 and 368 289 PATA controllers via the new ATA layer. 290 291 If unsure, say N. 292 293config PATA_HPT37X 294 tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" 295 depends on PCI && EXPERIMENTAL 296 help 297 This option enables support for the majority of the later HPT 298 PATA controllers via the new ATA layer. 299 300 If unsure, say N. 301 302config PATA_HPT3X2N 303 tristate "HPT 372N/302N PATA support (Very Experimental)" 304 depends on PCI && EXPERIMENTAL 305 help 306 This option enables support for the N variant HPT PATA 307 controllers via the new ATA layer 308 309 If unsure, say N. 310 311config PATA_HPT3X3 312 tristate "HPT 343/363 PATA support" 313 depends on PCI 314 help 315 This option enables support for the HPT 343/363 316 PATA controllers via the new ATA layer 317 318 If unsure, say N. 319 320config PATA_HPT3X3_DMA 321 bool "HPT 343/363 DMA support (Experimental)" 322 depends on PATA_HPT3X3 323 help 324 This option enables DMA support for the HPT343/363 325 controllers. Enable with care as there are still some 326 problems with DMA on this chipset. 327 328config PATA_ISAPNP 329 tristate "ISA Plug and Play PATA support (Experimental)" 330 depends on EXPERIMENTAL && ISAPNP 331 help 332 This option enables support for ISA plug & play ATA 333 controllers such as those found on old soundcards. 334 335 If unsure, say N. 336 337config PATA_IT821X 338 tristate "IT8211/2 PATA support" 339 depends on PCI 340 help 341 This option enables support for the ITE 8211 and 8212 342 PATA controllers via the new ATA layer, including RAID 343 mode. 344 345 If unsure, say N. 346 347config PATA_IT8213 348 tristate "IT8213 PATA support (Experimental)" 349 depends on PCI && EXPERIMENTAL 350 help 351 This option enables support for the ITE 821 PATA 352 controllers via the new ATA layer. 353 354 If unsure, say N. 355 356config PATA_JMICRON 357 tristate "JMicron PATA support" 358 depends on PCI 359 help 360 Enable support for the JMicron IDE controller, via the new 361 ATA layer. 362 363 If unsure, say N. 364 365config PATA_LEGACY 366 tristate "Legacy ISA PATA support (Experimental)" 367 depends on ISA && EXPERIMENTAL 368 help 369 This option enables support for ISA/VLB bus legacy PATA 370 ports and allows them to be accessed via the new ATA layer. 371 372 If unsure, say N. 373 374config PATA_TRIFLEX 375 tristate "Compaq Triflex PATA support" 376 depends on PCI 377 help 378 Enable support for the Compaq 'Triflex' IDE controller as found 379 on many Compaq Pentium-Pro systems, via the new ATA layer. 380 381 If unsure, say N. 382 383config PATA_MARVELL 384 tristate "Marvell PATA support via legacy mode" 385 depends on PCI 386 help 387 This option enables limited support for the Marvell 88SE6145 ATA 388 controller. 389 390 If unsure, say N. 391 392config PATA_MPC52xx 393 tristate "Freescale MPC52xx SoC internal IDE" 394 depends on PPC_MPC52xx 395 help 396 This option enables support for integrated IDE controller 397 of the Freescale MPC52xx SoC. 398 399 If unsure, say N. 400 401config PATA_MPIIX 402 tristate "Intel PATA MPIIX support" 403 depends on PCI 404 help 405 This option enables support for MPIIX PATA support. 406 407 If unsure, say N. 408 409config PATA_OLDPIIX 410 tristate "Intel PATA old PIIX support" 411 depends on PCI 412 help 413 This option enables support for early PIIX PATA support. 414 415 If unsure, say N. 416 417config PATA_NETCELL 418 tristate "NETCELL Revolution RAID support" 419 depends on PCI 420 help 421 This option enables support for the Netcell Revolution RAID 422 PATA controller. 423 424 If unsure, say N. 425 426config PATA_NS87410 427 tristate "Nat Semi NS87410 PATA support (Experimental)" 428 depends on PCI && EXPERIMENTAL 429 help 430 This option enables support for the National Semiconductor 431 NS87410 PCI-IDE controller. 432 433 If unsure, say N. 434 435config PATA_OPTI 436 tristate "OPTI621/6215 PATA support (Very Experimental)" 437 depends on PCI && EXPERIMENTAL 438 help 439 This option enables full PIO support for the early Opti ATA 440 controllers found on some old motherboards. 441 442 If unsure, say N. 443 444config PATA_OPTIDMA 445 tristate "OPTI FireStar PATA support (Very Experimental)" 446 depends on PCI && EXPERIMENTAL 447 help 448 This option enables DMA/PIO support for the later OPTi 449 controllers found on some old motherboards and in some 450 laptops. 451 452 If unsure, say N. 453 454config PATA_PCMCIA 455 tristate "PCMCIA PATA support" 456 depends on PCMCIA 457 help 458 This option enables support for PCMCIA ATA interfaces, including 459 compact flash card adapters via the new ATA layer. 460 461 If unsure, say N. 462 463config PATA_PDC_OLD 464 tristate "Older Promise PATA controller support (Experimental)" 465 depends on PCI && EXPERIMENTAL 466 help 467 This option enables support for the Promise 20246, 20262, 20263, 468 20265 and 20267 adapters. 469 470 If unsure, say N. 471 472config PATA_QDI 473 tristate "QDI VLB PATA support" 474 depends on ISA 475 help 476 Support for QDI 6500 and 6580 PATA controllers on VESA local bus. 477 478config PATA_RADISYS 479 tristate "RADISYS 82600 PATA support (Very Experimental)" 480 depends on PCI && EXPERIMENTAL 481 help 482 This option enables support for the RADISYS 82600 483 PATA controllers via the new ATA layer 484 485 If unsure, say N. 486 487config PATA_RZ1000 488 tristate "PC Tech RZ1000 PATA support" 489 depends on PCI 490 help 491 This option enables basic support for the PC Tech RZ1000/1 492 PATA controllers via the new ATA layer 493 494 If unsure, say N. 495 496config PATA_SC1200 497 tristate "SC1200 PATA support (Very Experimental)" 498 depends on PCI && EXPERIMENTAL 499 help 500 This option enables support for the NatSemi/AMD SC1200 SoC 501 companion chip used with the Geode processor family. 502 503 If unsure, say N. 504 505config PATA_SERVERWORKS 506 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" 507 depends on PCI 508 help 509 This option enables support for the Serverworks OSB4/CSB5/CSB6 and 510 HT1000 PATA controllers, via the new ATA layer. 511 512 If unsure, say N. 513 514config PATA_PDC2027X 515 tristate "Promise PATA 2027x support" 516 depends on PCI 517 help 518 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. 519 520 If unsure, say N. 521 522config PATA_SIL680 523 tristate "CMD / Silicon Image 680 PATA support" 524 depends on PCI 525 help 526 This option enables support for CMD / Silicon Image 680 PATA. 527 528 If unsure, say N. 529 530config PATA_SIS 531 tristate "SiS PATA support (Experimental)" 532 depends on PCI && EXPERIMENTAL 533 help 534 This option enables support for SiS PATA controllers 535 536 If unsure, say N. 537 538config PATA_VIA 539 tristate "VIA PATA support" 540 depends on PCI 541 help 542 This option enables support for the VIA PATA interfaces 543 found on the many VIA chipsets. 544 545 If unsure, say N. 546 547config PATA_WINBOND 548 tristate "Winbond SL82C105 PATA support" 549 depends on PCI 550 help 551 This option enables support for SL82C105 PATA devices found in the 552 Netwinder and some other systems 553 554 If unsure, say N. 555 556config PATA_WINBOND_VLB 557 tristate "Winbond W83759A VLB PATA support (Experimental)" 558 depends on ISA && EXPERIMENTAL 559 help 560 Support for the Winbond W83759A controller on Vesa Local Bus 561 systems. 562 563config PATA_PLATFORM 564 tristate "Generic platform device PATA support" 565 depends on EMBEDDED || ARCH_RPC 566 help 567 This option enables support for generic directly connected ATA 568 devices commonly found on embedded systems. 569 570 If unsure, say N. 571 572config PATA_ICSIDE 573 tristate "Acorn ICS PATA support" 574 depends on ARM && ARCH_ACORN 575 help 576 On Acorn systems, say Y here if you wish to use the ICS PATA 577 interface card. This is not required for ICS partition support. 578 If you are unsure, say N to this. 579 580config PATA_IXP4XX_CF 581 tristate "IXP4XX Compact Flash support" 582 depends on ARCH_IXP4XX 583 help 584 This option enables support for a Compact Flash connected on 585 the ixp4xx expansion bus. This driver had been written for 586 Loft/Avila boards in mind but can work with others. 587 588 If unsure, say N. 589 590config PATA_SCC 591 tristate "Toshiba's Cell Reference Set IDE support" 592 depends on PCI && PPC_CELLEB 593 help 594 This option enables support for the built-in IDE controller on 595 Toshiba Cell Reference Board. 596 597 If unsure, say N. 598 599endif # ATA 600