1# 2# SATA/PATA driver configuration 3# 4 5menuconfig ATA 6 tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers" 7 depends on HAS_IOMEM 8 depends on BLOCK 9 depends on !(M32R || M68K) || BROKEN 10 depends on !SUN4 || BROKEN 11 select SCSI 12 ---help--- 13 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or 14 any other ATA device under Linux, say Y and make sure that you know 15 the name of your ATA host adapter (the card inside your computer 16 that "speaks" the ATA protocol, also called ATA controller), 17 because you will be asked for it. 18 19 NOTE: ATA enables basic SCSI support; *however*, 20 'SCSI disk support', 'SCSI tape support', or 21 'SCSI CDROM support' may also be needed, 22 depending on your hardware configuration. 23 24if ATA 25 26config ATA_NONSTANDARD 27 bool 28 default n 29 30config ATA_ACPI 31 bool "ATA ACPI Support" 32 depends on ACPI && PCI 33 select ACPI_DOCK 34 default y 35 help 36 This option adds support for ATA-related ACPI objects. 37 These ACPI objects add the ability to retrieve taskfiles 38 from the ACPI BIOS and write them to the disk controller. 39 These objects may be related to performance, security, 40 power management, or other areas. 41 You can disable this at kernel boot time by using the 42 option libata.noacpi=1 43 44config SATA_PMP 45 bool "SATA Port Multiplier support" 46 default y 47 help 48 This option adds support for SATA Port Multipliers 49 (the SATA version of an ethernet hub, or SAS expander). 50 51config SATA_AHCI 52 tristate "AHCI SATA support" 53 depends on PCI 54 help 55 This option enables support for AHCI Serial ATA. 56 57 If unsure, say N. 58 59config SATA_SIL24 60 tristate "Silicon Image 3124/3132 SATA support" 61 depends on PCI 62 help 63 This option enables support for Silicon Image 3124/3132 Serial ATA. 64 65 If unsure, say N. 66 67config SATA_FSL 68 tristate "Freescale 3.0Gbps SATA support" 69 depends on FSL_SOC 70 help 71 This option enables support for Freescale 3.0Gbps SATA controller. 72 It can be found on MPC837x and MPC8315. 73 74 If unsure, say N. 75 76config ATA_SFF 77 bool "ATA SFF support" 78 default y 79 help 80 This option adds support for ATA controllers with SFF 81 compliant or similar programming interface. 82 83 SFF is the legacy IDE interface that has been around since 84 the dawn of time. Almost all PATA controllers have an 85 SFF interface. Many SATA controllers have an SFF interface 86 when configured into a legacy compatibility mode. 87 88 For users with exclusively modern controllers like AHCI, 89 Silicon Image 3124, or Marvell 6440, you may choose to 90 disable this uneeded SFF support. 91 92 If unsure, say Y. 93 94if ATA_SFF 95 96config SATA_SVW 97 tristate "ServerWorks Frodo / Apple K2 SATA support" 98 depends on PCI 99 help 100 This option enables support for Broadcom/Serverworks/Apple K2 101 SATA support. 102 103 If unsure, say N. 104 105config ATA_PIIX 106 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" 107 depends on PCI 108 help 109 This option enables support for ICH5/6/7/8 Serial ATA 110 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series 111 host controllers. 112 113 If unsure, say N. 114 115config SATA_MV 116 tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" 117 depends on EXPERIMENTAL 118 help 119 This option enables support for the Marvell Serial ATA family. 120 Currently supports 88SX[56]0[48][01] chips. 121 122 If unsure, say N. 123 124config SATA_NV 125 tristate "NVIDIA SATA support" 126 depends on PCI 127 help 128 This option enables support for NVIDIA Serial ATA. 129 130 If unsure, say N. 131 132config PDC_ADMA 133 tristate "Pacific Digital ADMA support" 134 depends on PCI 135 help 136 This option enables support for Pacific Digital ADMA controllers 137 138 If unsure, say N. 139 140config SATA_QSTOR 141 tristate "Pacific Digital SATA QStor support" 142 depends on PCI 143 help 144 This option enables support for Pacific Digital Serial ATA QStor. 145 146 If unsure, say N. 147 148config SATA_PROMISE 149 tristate "Promise SATA TX2/TX4 support" 150 depends on PCI 151 help 152 This option enables support for Promise Serial ATA TX2/TX4. 153 154 If unsure, say N. 155 156config SATA_SX4 157 tristate "Promise SATA SX4 support" 158 depends on PCI && EXPERIMENTAL 159 help 160 This option enables support for Promise Serial ATA SX4. 161 162 If unsure, say N. 163 164config SATA_SIL 165 tristate "Silicon Image SATA support" 166 depends on PCI 167 help 168 This option enables support for Silicon Image Serial ATA. 169 170 If unsure, say N. 171 172config SATA_SIS 173 tristate "SiS 964/965/966/180 SATA support" 174 depends on PCI 175 select PATA_SIS 176 help 177 This option enables support for SiS Serial ATA on 178 SiS 964/965/966/180 and Parallel ATA on SiS 180. 179 The PATA support for SiS 180 requires additionally to 180 enable the PATA_SIS driver in the config. 181 If unsure, say N. 182 183config SATA_ULI 184 tristate "ULi Electronics SATA support" 185 depends on PCI 186 help 187 This option enables support for ULi Electronics SATA. 188 189 If unsure, say N. 190 191config SATA_VIA 192 tristate "VIA SATA support" 193 depends on PCI 194 help 195 This option enables support for VIA Serial ATA. 196 197 If unsure, say N. 198 199config SATA_VITESSE 200 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" 201 depends on PCI 202 help 203 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. 204 205 If unsure, say N. 206 207config SATA_INIC162X 208 tristate "Initio 162x SATA support" 209 depends on PCI 210 help 211 This option enables support for Initio 162x Serial ATA. 212 213config PATA_ACPI 214 tristate "ACPI firmware driver for PATA" 215 depends on ATA_ACPI 216 help 217 This option enables an ACPI method driver which drives 218 motherboard PATA controller interfaces through the ACPI 219 firmware in the BIOS. This driver can sometimes handle 220 otherwise unsupported hardware. 221 222config PATA_ALI 223 tristate "ALi PATA support (Experimental)" 224 depends on PCI && EXPERIMENTAL 225 help 226 This option enables support for the ALi ATA interfaces 227 found on the many ALi chipsets. 228 229 If unsure, say N. 230 231config PATA_AMD 232 tristate "AMD/NVidia PATA support" 233 depends on PCI 234 help 235 This option enables support for the AMD and NVidia PATA 236 interfaces found on the chipsets for Athlon/Athlon64. 237 238 If unsure, say N. 239 240config PATA_ARTOP 241 tristate "ARTOP 6210/6260 PATA support" 242 depends on PCI 243 help 244 This option enables support for ARTOP PATA controllers. 245 246 If unsure, say N. 247 248config PATA_AT32 249 tristate "Atmel AVR32 PATA support (Experimental)" 250 depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL 251 help 252 This option enables support for the IDE devices on the 253 Atmel AT32AP platform. 254 255 If unsure, say N. 256 257config PATA_ATIIXP 258 tristate "ATI PATA support" 259 depends on PCI 260 help 261 This option enables support for the ATI ATA interfaces 262 found on the many ATI chipsets. 263 264 If unsure, say N. 265 266config PATA_CMD640_PCI 267 tristate "CMD640 PCI PATA support (Very Experimental)" 268 depends on PCI && EXPERIMENTAL 269 help 270 This option enables support for the CMD640 PCI IDE 271 interface chip. Only the primary channel is currently 272 supported. 273 274 If unsure, say N. 275 276config PATA_CMD64X 277 tristate "CMD64x PATA support" 278 depends on PCI 279 help 280 This option enables support for the CMD64x series chips 281 except for the CMD640. 282 283 If unsure, say N. 284 285config PATA_CS5520 286 tristate "CS5510/5520 PATA support" 287 depends on PCI 288 help 289 This option enables support for the Cyrix 5510/5520 290 companion chip used with the MediaGX/Geode processor family. 291 292 If unsure, say N. 293 294config PATA_CS5530 295 tristate "CS5530 PATA support (Experimental)" 296 depends on PCI && EXPERIMENTAL 297 help 298 This option enables support for the Cyrix/NatSemi/AMD CS5530 299 companion chip used with the MediaGX/Geode processor family. 300 301 If unsure, say N. 302 303config PATA_CS5535 304 tristate "CS5535 PATA support (Experimental)" 305 depends on PCI && X86 && !X86_64 && EXPERIMENTAL 306 help 307 This option enables support for the NatSemi/AMD CS5535 308 companion chip used with the Geode processor family. 309 310 If unsure, say N. 311 312config PATA_CS5536 313 tristate "CS5536 PATA support (Experimental)" 314 depends on PCI && X86 && !X86_64 && EXPERIMENTAL 315 help 316 This option enables support for the AMD CS5536 317 companion chip used with the Geode LX processor family. 318 319 If unsure, say N. 320 321config PATA_CYPRESS 322 tristate "Cypress CY82C693 PATA support (Very Experimental)" 323 depends on PCI && EXPERIMENTAL 324 help 325 This option enables support for the Cypress/Contaq CY82C693 326 chipset found in some Alpha systems 327 328 If unsure, say N. 329 330config PATA_EFAR 331 tristate "EFAR SLC90E66 support" 332 depends on PCI 333 help 334 This option enables support for the EFAR SLC90E66 335 IDE controller found on some older machines. 336 337 If unsure, say N. 338 339config ATA_GENERIC 340 tristate "Generic ATA support" 341 depends on PCI 342 help 343 This option enables support for generic BIOS configured 344 ATA controllers via the new ATA layer 345 346 If unsure, say N. 347 348config PATA_HPT366 349 tristate "HPT 366/368 PATA support" 350 depends on PCI 351 help 352 This option enables support for the HPT 366 and 368 353 PATA controllers via the new ATA layer. 354 355 If unsure, say N. 356 357config PATA_HPT37X 358 tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)" 359 depends on PCI && EXPERIMENTAL 360 help 361 This option enables support for the majority of the later HPT 362 PATA controllers via the new ATA layer. 363 364 If unsure, say N. 365 366config PATA_HPT3X2N 367 tristate "HPT 372N/302N PATA support (Very Experimental)" 368 depends on PCI && EXPERIMENTAL 369 help 370 This option enables support for the N variant HPT PATA 371 controllers via the new ATA layer 372 373 If unsure, say N. 374 375config PATA_HPT3X3 376 tristate "HPT 343/363 PATA support" 377 depends on PCI 378 help 379 This option enables support for the HPT 343/363 380 PATA controllers via the new ATA layer 381 382 If unsure, say N. 383 384config PATA_HPT3X3_DMA 385 bool "HPT 343/363 DMA support (Experimental)" 386 depends on PATA_HPT3X3 387 help 388 This option enables DMA support for the HPT343/363 389 controllers. Enable with care as there are still some 390 problems with DMA on this chipset. 391 392config PATA_ISAPNP 393 tristate "ISA Plug and Play PATA support (Experimental)" 394 depends on EXPERIMENTAL && ISAPNP 395 help 396 This option enables support for ISA plug & play ATA 397 controllers such as those found on old soundcards. 398 399 If unsure, say N. 400 401config PATA_IT821X 402 tristate "IT8211/2 PATA support" 403 depends on PCI 404 help 405 This option enables support for the ITE 8211 and 8212 406 PATA controllers via the new ATA layer, including RAID 407 mode. 408 409 If unsure, say N. 410 411config PATA_IT8213 412 tristate "IT8213 PATA support (Experimental)" 413 depends on PCI && EXPERIMENTAL 414 help 415 This option enables support for the ITE 821 PATA 416 controllers via the new ATA layer. 417 418 If unsure, say N. 419 420config PATA_JMICRON 421 tristate "JMicron PATA support" 422 depends on PCI 423 help 424 Enable support for the JMicron IDE controller, via the new 425 ATA layer. 426 427 If unsure, say N. 428 429config PATA_LEGACY 430 tristate "Legacy ISA PATA support (Experimental)" 431 depends on ISA && EXPERIMENTAL 432 help 433 This option enables support for ISA/VLB bus legacy PATA 434 ports and allows them to be accessed via the new ATA layer. 435 436 If unsure, say N. 437 438config PATA_TRIFLEX 439 tristate "Compaq Triflex PATA support" 440 depends on PCI 441 help 442 Enable support for the Compaq 'Triflex' IDE controller as found 443 on many Compaq Pentium-Pro systems, via the new ATA layer. 444 445 If unsure, say N. 446 447config PATA_MARVELL 448 tristate "Marvell PATA support via legacy mode" 449 depends on PCI 450 help 451 This option enables limited support for the Marvell 88SE61xx ATA 452 controllers. If you wish to use only the SATA ports then select 453 the AHCI driver alone. If you wish to the use the PATA port or 454 both SATA and PATA include this driver. 455 456 If unsure, say N. 457 458config PATA_MPC52xx 459 tristate "Freescale MPC52xx SoC internal IDE" 460 depends on PPC_MPC52xx 461 help 462 This option enables support for integrated IDE controller 463 of the Freescale MPC52xx SoC. 464 465 If unsure, say N. 466 467config PATA_MPIIX 468 tristate "Intel PATA MPIIX support" 469 depends on PCI 470 help 471 This option enables support for MPIIX PATA support. 472 473 If unsure, say N. 474 475config PATA_OLDPIIX 476 tristate "Intel PATA old PIIX support" 477 depends on PCI 478 help 479 This option enables support for early PIIX PATA support. 480 481 If unsure, say N. 482 483config PATA_NETCELL 484 tristate "NETCELL Revolution RAID support" 485 depends on PCI 486 help 487 This option enables support for the Netcell Revolution RAID 488 PATA controller. 489 490 If unsure, say N. 491 492config PATA_NINJA32 493 tristate "Ninja32/Delkin Cardbus ATA support (Experimental)" 494 depends on PCI && EXPERIMENTAL 495 help 496 This option enables support for the Ninja32, Delkin and 497 possibly other brands of Cardbus ATA adapter 498 499 If unsure, say N. 500 501config PATA_NS87410 502 tristate "Nat Semi NS87410 PATA support (Experimental)" 503 depends on PCI && EXPERIMENTAL 504 help 505 This option enables support for the National Semiconductor 506 NS87410 PCI-IDE controller. 507 508 If unsure, say N. 509 510config PATA_NS87415 511 tristate "Nat Semi NS87415 PATA support (Experimental)" 512 depends on PCI && EXPERIMENTAL 513 help 514 This option enables support for the National Semiconductor 515 NS87415 PCI-IDE controller. 516 517 If unsure, say N. 518 519config PATA_OPTI 520 tristate "OPTI621/6215 PATA support (Very Experimental)" 521 depends on PCI && EXPERIMENTAL 522 help 523 This option enables full PIO support for the early Opti ATA 524 controllers found on some old motherboards. 525 526 If unsure, say N. 527 528config PATA_OPTIDMA 529 tristate "OPTI FireStar PATA support (Very Experimental)" 530 depends on PCI && EXPERIMENTAL 531 help 532 This option enables DMA/PIO support for the later OPTi 533 controllers found on some old motherboards and in some 534 laptops. 535 536 If unsure, say N. 537 538config PATA_PCMCIA 539 tristate "PCMCIA PATA support" 540 depends on PCMCIA 541 help 542 This option enables support for PCMCIA ATA interfaces, including 543 compact flash card adapters via the new ATA layer. 544 545 If unsure, say N. 546 547config PATA_PDC_OLD 548 tristate "Older Promise PATA controller support (Experimental)" 549 depends on PCI && EXPERIMENTAL 550 help 551 This option enables support for the Promise 20246, 20262, 20263, 552 20265 and 20267 adapters. 553 554 If unsure, say N. 555 556config PATA_QDI 557 tristate "QDI VLB PATA support" 558 depends on ISA 559 help 560 Support for QDI 6500 and 6580 PATA controllers on VESA local bus. 561 562config PATA_RADISYS 563 tristate "RADISYS 82600 PATA support (Very Experimental)" 564 depends on PCI && EXPERIMENTAL 565 help 566 This option enables support for the RADISYS 82600 567 PATA controllers via the new ATA layer 568 569 If unsure, say N. 570 571config PATA_RB532 572 tristate "RouterBoard 532 PATA CompactFlash support" 573 depends on MIKROTIK_RB532 574 help 575 This option enables support for the RouterBoard 532 576 PATA CompactFlash controller. 577 578 If unsure, say N. 579 580config PATA_RZ1000 581 tristate "PC Tech RZ1000 PATA support" 582 depends on PCI 583 help 584 This option enables basic support for the PC Tech RZ1000/1 585 PATA controllers via the new ATA layer 586 587 If unsure, say N. 588 589config PATA_SC1200 590 tristate "SC1200 PATA support (Very Experimental)" 591 depends on PCI && EXPERIMENTAL 592 help 593 This option enables support for the NatSemi/AMD SC1200 SoC 594 companion chip used with the Geode processor family. 595 596 If unsure, say N. 597 598config PATA_SERVERWORKS 599 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" 600 depends on PCI 601 help 602 This option enables support for the Serverworks OSB4/CSB5/CSB6 and 603 HT1000 PATA controllers, via the new ATA layer. 604 605 If unsure, say N. 606 607config PATA_PDC2027X 608 tristate "Promise PATA 2027x support" 609 depends on PCI 610 help 611 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. 612 613 If unsure, say N. 614 615config PATA_SIL680 616 tristate "CMD / Silicon Image 680 PATA support" 617 depends on PCI 618 help 619 This option enables support for CMD / Silicon Image 680 PATA. 620 621 If unsure, say N. 622 623config PATA_SIS 624 tristate "SiS PATA support (Experimental)" 625 depends on PCI && EXPERIMENTAL 626 help 627 This option enables support for SiS PATA controllers 628 629 If unsure, say N. 630 631config PATA_VIA 632 tristate "VIA PATA support" 633 depends on PCI 634 help 635 This option enables support for the VIA PATA interfaces 636 found on the many VIA chipsets. 637 638 If unsure, say N. 639 640config PATA_WINBOND 641 tristate "Winbond SL82C105 PATA support" 642 depends on PCI 643 help 644 This option enables support for SL82C105 PATA devices found in the 645 Netwinder and some other systems 646 647 If unsure, say N. 648 649config PATA_WINBOND_VLB 650 tristate "Winbond W83759A VLB PATA support (Experimental)" 651 depends on ISA && EXPERIMENTAL 652 help 653 Support for the Winbond W83759A controller on Vesa Local Bus 654 systems. 655 656config HAVE_PATA_PLATFORM 657 bool 658 help 659 This is an internal configuration node for any machine that 660 uses pata-platform driver to enable the relevant driver in the 661 configuration structure without having to submit endless patches 662 to update the PATA_PLATFORM entry. 663 664config PATA_PLATFORM 665 tristate "Generic platform device PATA support" 666 depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM 667 help 668 This option enables support for generic directly connected ATA 669 devices commonly found on embedded systems. 670 671 If unsure, say N. 672 673config PATA_OF_PLATFORM 674 tristate "OpenFirmware platform device PATA support" 675 depends on PATA_PLATFORM && PPC_OF 676 help 677 This option enables support for generic directly connected ATA 678 devices commonly found on embedded systems with OpenFirmware 679 bindings. 680 681 If unsure, say N. 682 683config PATA_ICSIDE 684 tristate "Acorn ICS PATA support" 685 depends on ARM && ARCH_ACORN 686 help 687 On Acorn systems, say Y here if you wish to use the ICS PATA 688 interface card. This is not required for ICS partition support. 689 If you are unsure, say N to this. 690 691config PATA_IXP4XX_CF 692 tristate "IXP4XX Compact Flash support" 693 depends on ARCH_IXP4XX 694 help 695 This option enables support for a Compact Flash connected on 696 the ixp4xx expansion bus. This driver had been written for 697 Loft/Avila boards in mind but can work with others. 698 699 If unsure, say N. 700 701config PATA_SCC 702 tristate "Toshiba's Cell Reference Set IDE support" 703 depends on PCI && PPC_CELLEB 704 help 705 This option enables support for the built-in IDE controller on 706 Toshiba Cell Reference Board. 707 708 If unsure, say N. 709 710config PATA_SCH 711 tristate "Intel SCH PATA support" 712 depends on PCI 713 help 714 This option enables support for Intel SCH PATA on the Intel 715 SCH (US15W, US15L, UL11L) series host controllers. 716 717 If unsure, say N. 718 719config PATA_BF54X 720 tristate "Blackfin 54x ATAPI support" 721 depends on BF542 || BF548 || BF549 722 help 723 This option enables support for the built-in ATAPI controller on 724 Blackfin 54x family chips. 725 726 If unsure, say N. 727 728endif # ATA_SFF 729endif # ATA 730