1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * pci_irq.c - ACPI PCI Interrupt Routing ($Revision: 11 $) 4 * 5 * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> 6 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> 7 * Copyright (C) 2002 Dominik Brodowski <devel@brodo.de> 8 * (c) Copyright 2008 Hewlett-Packard Development Company, L.P. 9 * Bjorn Helgaas <bjorn.helgaas@hp.com> 10 */ 11 12 #define pr_fmt(fmt) "ACPI: PCI: " fmt 13 14 #include <linux/dmi.h> 15 #include <linux/kernel.h> 16 #include <linux/module.h> 17 #include <linux/init.h> 18 #include <linux/types.h> 19 #include <linux/spinlock.h> 20 #include <linux/pm.h> 21 #include <linux/pci.h> 22 #include <linux/acpi.h> 23 #include <linux/slab.h> 24 #include <linux/interrupt.h> 25 26 struct acpi_prt_entry { 27 struct acpi_pci_id id; 28 u8 pin; 29 acpi_handle link; 30 u32 index; /* GSI, or link _CRS index */ 31 }; 32 33 static inline char pin_name(int pin) 34 { 35 return 'A' + pin - 1; 36 } 37 38 /* -------------------------------------------------------------------------- 39 PCI IRQ Routing Table (PRT) Support 40 -------------------------------------------------------------------------- */ 41 42 /* http://bugzilla.kernel.org/show_bug.cgi?id=4773 */ 43 static const struct dmi_system_id medion_md9580[] = { 44 { 45 .ident = "Medion MD9580-F laptop", 46 .matches = { 47 DMI_MATCH(DMI_SYS_VENDOR, "MEDIONNB"), 48 DMI_MATCH(DMI_PRODUCT_NAME, "A555"), 49 }, 50 }, 51 { } 52 }; 53 54 /* http://bugzilla.kernel.org/show_bug.cgi?id=5044 */ 55 static const struct dmi_system_id dell_optiplex[] = { 56 { 57 .ident = "Dell Optiplex GX1", 58 .matches = { 59 DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), 60 DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX1 600S+"), 61 }, 62 }, 63 { } 64 }; 65 66 /* http://bugzilla.kernel.org/show_bug.cgi?id=10138 */ 67 static const struct dmi_system_id hp_t5710[] = { 68 { 69 .ident = "HP t5710", 70 .matches = { 71 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 72 DMI_MATCH(DMI_PRODUCT_NAME, "hp t5000 series"), 73 DMI_MATCH(DMI_BOARD_NAME, "098Ch"), 74 }, 75 }, 76 { } 77 }; 78 79 struct prt_quirk { 80 const struct dmi_system_id *system; 81 unsigned int segment; 82 unsigned int bus; 83 unsigned int device; 84 unsigned char pin; 85 const char *source; /* according to BIOS */ 86 const char *actual_source; 87 }; 88 89 #define PCI_INTX_PIN(c) (c - 'A' + 1) 90 91 /* 92 * These systems have incorrect _PRT entries. The BIOS claims the PCI 93 * interrupt at the listed segment/bus/device/pin is connected to the first 94 * link device, but it is actually connected to the second. 95 */ 96 static const struct prt_quirk prt_quirks[] = { 97 { medion_md9580, 0, 0, 9, PCI_INTX_PIN('A'), 98 "\\_SB_.PCI0.ISA_.LNKA", 99 "\\_SB_.PCI0.ISA_.LNKB"}, 100 { dell_optiplex, 0, 0, 0xd, PCI_INTX_PIN('A'), 101 "\\_SB_.LNKB", 102 "\\_SB_.LNKA"}, 103 { hp_t5710, 0, 0, 1, PCI_INTX_PIN('A'), 104 "\\_SB_.PCI0.LNK1", 105 "\\_SB_.PCI0.LNK3"}, 106 }; 107 108 static void do_prt_fixups(struct acpi_prt_entry *entry, 109 struct acpi_pci_routing_table *prt) 110 { 111 int i; 112 const struct prt_quirk *quirk; 113 114 for (i = 0; i < ARRAY_SIZE(prt_quirks); i++) { 115 quirk = &prt_quirks[i]; 116 117 /* All current quirks involve link devices, not GSIs */ 118 if (dmi_check_system(quirk->system) && 119 entry->id.segment == quirk->segment && 120 entry->id.bus == quirk->bus && 121 entry->id.device == quirk->device && 122 entry->pin == quirk->pin && 123 !strcmp(prt->source, quirk->source) && 124 strlen(prt->source) >= strlen(quirk->actual_source)) { 125 pr_warn("Firmware reports " 126 "%04x:%02x:%02x PCI INT %c connected to %s; " 127 "changing to %s\n", 128 entry->id.segment, entry->id.bus, 129 entry->id.device, pin_name(entry->pin), 130 prt->source, quirk->actual_source); 131 strcpy(prt->source, quirk->actual_source); 132 } 133 } 134 } 135 136 static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev, 137 int pin, struct acpi_pci_routing_table *prt, 138 struct acpi_prt_entry **entry_ptr) 139 { 140 int segment = pci_domain_nr(dev->bus); 141 int bus = dev->bus->number; 142 int device = pci_ari_enabled(dev->bus) ? 0 : PCI_SLOT(dev->devfn); 143 struct acpi_prt_entry *entry; 144 145 if (((prt->address >> 16) & 0xffff) != device || 146 prt->pin + 1 != pin) 147 return -ENODEV; 148 149 entry = kzalloc(sizeof(struct acpi_prt_entry), GFP_KERNEL); 150 if (!entry) 151 return -ENOMEM; 152 153 /* 154 * Note that the _PRT uses 0=INTA, 1=INTB, etc, while PCI uses 155 * 1=INTA, 2=INTB. We use the PCI encoding throughout, so convert 156 * it here. 157 */ 158 entry->id.segment = segment; 159 entry->id.bus = bus; 160 entry->id.device = (prt->address >> 16) & 0xFFFF; 161 entry->pin = prt->pin + 1; 162 163 do_prt_fixups(entry, prt); 164 165 entry->index = prt->source_index; 166 167 /* 168 * Type 1: Dynamic 169 * --------------- 170 * The 'source' field specifies the PCI interrupt link device used to 171 * configure the IRQ assigned to this slot|dev|pin. The 'source_index' 172 * indicates which resource descriptor in the resource template (of 173 * the link device) this interrupt is allocated from. 174 * 175 * NOTE: Don't query the Link Device for IRQ information at this time 176 * because Link Device enumeration may not have occurred yet 177 * (e.g. exists somewhere 'below' this _PRT entry in the ACPI 178 * namespace). 179 */ 180 if (prt->source[0]) 181 acpi_get_handle(handle, prt->source, &entry->link); 182 183 /* 184 * Type 2: Static 185 * -------------- 186 * The 'source' field is NULL, and the 'source_index' field specifies 187 * the IRQ value, which is hardwired to specific interrupt inputs on 188 * the interrupt controller. 189 */ 190 pr_debug("%04x:%02x:%02x[%c] -> %s[%d]\n", 191 entry->id.segment, entry->id.bus, entry->id.device, 192 pin_name(entry->pin), prt->source, entry->index); 193 194 *entry_ptr = entry; 195 196 return 0; 197 } 198 199 static int acpi_pci_irq_find_prt_entry(struct pci_dev *dev, 200 int pin, struct acpi_prt_entry **entry_ptr) 201 { 202 acpi_status status; 203 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; 204 struct acpi_pci_routing_table *entry; 205 acpi_handle handle = NULL; 206 207 if (dev->bus->bridge) 208 handle = ACPI_HANDLE(dev->bus->bridge); 209 210 if (!handle) 211 return -ENODEV; 212 213 /* 'handle' is the _PRT's parent (root bridge or PCI-PCI bridge) */ 214 status = acpi_get_irq_routing_table(handle, &buffer); 215 if (ACPI_FAILURE(status)) { 216 kfree(buffer.pointer); 217 return -ENODEV; 218 } 219 220 entry = buffer.pointer; 221 while (entry && (entry->length > 0)) { 222 if (!acpi_pci_irq_check_entry(handle, dev, pin, 223 entry, entry_ptr)) 224 break; 225 entry = (struct acpi_pci_routing_table *) 226 ((unsigned long)entry + entry->length); 227 } 228 229 kfree(buffer.pointer); 230 return 0; 231 } 232 233 /* -------------------------------------------------------------------------- 234 PCI Interrupt Routing Support 235 -------------------------------------------------------------------------- */ 236 #ifdef CONFIG_X86_IO_APIC 237 extern int noioapicquirk; 238 extern int noioapicreroute; 239 240 static int bridge_has_boot_interrupt_variant(struct pci_bus *bus) 241 { 242 struct pci_bus *bus_it; 243 244 for (bus_it = bus ; bus_it ; bus_it = bus_it->parent) { 245 if (!bus_it->self) 246 return 0; 247 if (bus_it->self->irq_reroute_variant) 248 return bus_it->self->irq_reroute_variant; 249 } 250 return 0; 251 } 252 253 /* 254 * Some chipsets (e.g. Intel 6700PXH) generate a legacy INTx when the IRQ 255 * entry in the chipset's IO-APIC is masked (as, e.g. the RT kernel does 256 * during interrupt handling). When this INTx generation cannot be disabled, 257 * we reroute these interrupts to their legacy equivalent to get rid of 258 * spurious interrupts. 259 */ 260 static int acpi_reroute_boot_interrupt(struct pci_dev *dev, 261 struct acpi_prt_entry *entry) 262 { 263 if (noioapicquirk || noioapicreroute) { 264 return 0; 265 } else { 266 switch (bridge_has_boot_interrupt_variant(dev->bus)) { 267 case 0: 268 /* no rerouting necessary */ 269 return 0; 270 case INTEL_IRQ_REROUTE_VARIANT: 271 /* 272 * Remap according to INTx routing table in 6700PXH 273 * specs, intel order number 302628-002, section 274 * 2.15.2. Other chipsets (80332, ...) have the same 275 * mapping and are handled here as well. 276 */ 277 dev_info(&dev->dev, "PCI IRQ %d -> rerouted to legacy " 278 "IRQ %d\n", entry->index, 279 (entry->index % 4) + 16); 280 entry->index = (entry->index % 4) + 16; 281 return 1; 282 default: 283 dev_warn(&dev->dev, "Cannot reroute IRQ %d to legacy " 284 "IRQ: unknown mapping\n", entry->index); 285 return -1; 286 } 287 } 288 } 289 #endif /* CONFIG_X86_IO_APIC */ 290 291 static struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin) 292 { 293 struct acpi_prt_entry *entry = NULL; 294 struct pci_dev *bridge; 295 u8 bridge_pin, orig_pin = pin; 296 int ret; 297 298 ret = acpi_pci_irq_find_prt_entry(dev, pin, &entry); 299 if (!ret && entry) { 300 #ifdef CONFIG_X86_IO_APIC 301 acpi_reroute_boot_interrupt(dev, entry); 302 #endif /* CONFIG_X86_IO_APIC */ 303 dev_dbg(&dev->dev, "Found [%c] _PRT entry\n", pin_name(pin)); 304 return entry; 305 } 306 307 /* 308 * Attempt to derive an IRQ for this device from a parent bridge's 309 * PCI interrupt routing entry (eg. yenta bridge and add-in card bridge). 310 */ 311 bridge = dev->bus->self; 312 while (bridge) { 313 pin = pci_swizzle_interrupt_pin(dev, pin); 314 315 if ((bridge->class >> 8) == PCI_CLASS_BRIDGE_CARDBUS) { 316 /* PC card has the same IRQ as its cardbridge */ 317 bridge_pin = bridge->pin; 318 if (!bridge_pin) { 319 dev_dbg(&bridge->dev, "No interrupt pin configured\n"); 320 return NULL; 321 } 322 pin = bridge_pin; 323 } 324 325 ret = acpi_pci_irq_find_prt_entry(bridge, pin, &entry); 326 if (!ret && entry) { 327 dev_dbg(&dev->dev, "Derived GSI INT %c from %s\n", 328 pin_name(orig_pin), pci_name(bridge)); 329 return entry; 330 } 331 332 dev = bridge; 333 bridge = dev->bus->self; 334 } 335 336 dev_warn(&dev->dev, "can't derive routing for PCI INT %c\n", 337 pin_name(orig_pin)); 338 return NULL; 339 } 340 341 #if IS_ENABLED(CONFIG_ISA) || IS_ENABLED(CONFIG_EISA) 342 static int acpi_isa_register_gsi(struct pci_dev *dev) 343 { 344 u32 dev_gsi; 345 346 /* Interrupt Line values above 0xF are forbidden */ 347 if (dev->irq > 0 && (dev->irq <= 0xF) && 348 acpi_isa_irq_available(dev->irq) && 349 (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) { 350 dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n", 351 pin_name(dev->pin), dev->irq); 352 acpi_register_gsi(&dev->dev, dev_gsi, 353 ACPI_LEVEL_SENSITIVE, 354 ACPI_ACTIVE_LOW); 355 return 0; 356 } 357 return -EINVAL; 358 } 359 #else 360 static inline int acpi_isa_register_gsi(struct pci_dev *dev) 361 { 362 return -ENODEV; 363 } 364 #endif 365 366 static inline bool acpi_pci_irq_valid(struct pci_dev *dev, u8 pin) 367 { 368 #ifdef CONFIG_X86 369 /* 370 * On x86 irq line 0xff means "unknown" or "no connection" 371 * (PCI 3.0, Section 6.2.4, footnote on page 223). 372 */ 373 if (dev->irq == 0xff) { 374 dev->irq = IRQ_NOTCONNECTED; 375 dev_warn(&dev->dev, "PCI INT %c: not connected\n", 376 pin_name(pin)); 377 return false; 378 } 379 #endif 380 return true; 381 } 382 383 int acpi_pci_irq_enable(struct pci_dev *dev) 384 { 385 struct acpi_prt_entry *entry; 386 int gsi; 387 u8 pin; 388 int triggering = ACPI_LEVEL_SENSITIVE; 389 /* 390 * On ARM systems with the GIC interrupt model, level interrupts 391 * are always polarity high by specification; PCI legacy 392 * IRQs lines are inverted before reaching the interrupt 393 * controller and must therefore be considered active high 394 * as default. 395 */ 396 int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ? 397 ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW; 398 char *link = NULL; 399 char link_desc[16]; 400 int rc; 401 402 pin = dev->pin; 403 if (!pin) { 404 dev_dbg(&dev->dev, "No interrupt pin configured\n"); 405 return 0; 406 } 407 408 if (dev->irq_managed && dev->irq > 0) 409 return 0; 410 411 entry = acpi_pci_irq_lookup(dev, pin); 412 if (!entry) { 413 /* 414 * IDE legacy mode controller IRQs are magic. Why do compat 415 * extensions always make such a nasty mess. 416 */ 417 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && 418 (dev->class & 0x05) == 0) 419 return 0; 420 } 421 422 if (entry) { 423 if (entry->link) 424 gsi = acpi_pci_link_allocate_irq(entry->link, 425 entry->index, 426 &triggering, &polarity, 427 &link); 428 else 429 gsi = entry->index; 430 } else 431 gsi = -1; 432 433 if (gsi < 0) { 434 /* 435 * No IRQ known to the ACPI subsystem - maybe the BIOS / 436 * driver reported one, then use it. Exit in any case. 437 */ 438 if (!acpi_pci_irq_valid(dev, pin)) { 439 kfree(entry); 440 return 0; 441 } 442 443 if (acpi_isa_register_gsi(dev)) 444 dev_warn(&dev->dev, "PCI INT %c: no GSI\n", 445 pin_name(pin)); 446 447 kfree(entry); 448 return 0; 449 } 450 451 rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity); 452 if (rc < 0) { 453 dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n", 454 pin_name(pin)); 455 kfree(entry); 456 return rc; 457 } 458 dev->irq = rc; 459 dev->irq_managed = 1; 460 461 if (link) 462 snprintf(link_desc, sizeof(link_desc), " -> Link[%s]", link); 463 else 464 link_desc[0] = '\0'; 465 466 dev_dbg(&dev->dev, "PCI INT %c%s -> GSI %u (%s, %s) -> IRQ %d\n", 467 pin_name(pin), link_desc, gsi, 468 (triggering == ACPI_LEVEL_SENSITIVE) ? "level" : "edge", 469 (polarity == ACPI_ACTIVE_LOW) ? "low" : "high", dev->irq); 470 471 kfree(entry); 472 return 0; 473 } 474 475 void acpi_pci_irq_disable(struct pci_dev *dev) 476 { 477 struct acpi_prt_entry *entry; 478 int gsi; 479 u8 pin; 480 481 pin = dev->pin; 482 if (!pin || !dev->irq_managed || dev->irq <= 0) 483 return; 484 485 /* Keep IOAPIC pin configuration when suspending */ 486 if (dev->dev.power.is_prepared) 487 return; 488 #ifdef CONFIG_PM 489 if (dev->dev.power.runtime_status == RPM_SUSPENDING) 490 return; 491 #endif 492 493 entry = acpi_pci_irq_lookup(dev, pin); 494 if (!entry) 495 return; 496 497 if (entry->link) 498 gsi = acpi_pci_link_free_irq(entry->link); 499 else 500 gsi = entry->index; 501 502 kfree(entry); 503 504 /* 505 * TBD: It might be worth clearing dev->irq by magic constant 506 * (e.g. PCI_UNDEFINED_IRQ). 507 */ 508 509 dev_dbg(&dev->dev, "PCI INT %c disabled\n", pin_name(pin)); 510 if (gsi >= 0) { 511 acpi_unregister_gsi(gsi); 512 dev->irq_managed = 0; 513 } 514 } 515