1 /****************************************************************************** 2 * 3 * Module Name: exprep - ACPI AML (p-code) execution - field prep utilities 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 #include "acinterp.h" 47 #include "amlcode.h" 48 #include "acnamesp.h" 49 #include "acdispat.h" 50 51 #define _COMPONENT ACPI_EXECUTER 52 ACPI_MODULE_NAME("exprep") 53 54 /* Local prototypes */ 55 static u32 56 acpi_ex_decode_field_access(union acpi_operand_object *obj_desc, 57 u8 field_flags, u32 * return_byte_alignment); 58 59 #ifdef ACPI_UNDER_DEVELOPMENT 60 61 static u32 62 acpi_ex_generate_access(u32 field_bit_offset, 63 u32 field_bit_length, u32 region_length); 64 65 /******************************************************************************* 66 * 67 * FUNCTION: acpi_ex_generate_access 68 * 69 * PARAMETERS: field_bit_offset - Start of field within parent region/buffer 70 * field_bit_length - Length of field in bits 71 * region_length - Length of parent in bytes 72 * 73 * RETURN: Field granularity (8, 16, 32 or 64) and 74 * byte_alignment (1, 2, 3, or 4) 75 * 76 * DESCRIPTION: Generate an optimal access width for fields defined with the 77 * any_acc keyword. 78 * 79 * NOTE: Need to have the region_length in order to check for boundary 80 * conditions (end-of-region). However, the region_length is a deferred 81 * operation. Therefore, to complete this implementation, the generation 82 * of this access width must be deferred until the region length has 83 * been evaluated. 84 * 85 ******************************************************************************/ 86 87 static u32 88 acpi_ex_generate_access(u32 field_bit_offset, 89 u32 field_bit_length, u32 region_length) 90 { 91 u32 field_byte_length; 92 u32 field_byte_offset; 93 u32 field_byte_end_offset; 94 u32 access_byte_width; 95 u32 field_start_offset; 96 u32 field_end_offset; 97 u32 minimum_access_width = 0xFFFFFFFF; 98 u32 minimum_accesses = 0xFFFFFFFF; 99 u32 accesses; 100 101 ACPI_FUNCTION_TRACE(ex_generate_access); 102 103 /* Round Field start offset and length to "minimal" byte boundaries */ 104 105 field_byte_offset = ACPI_DIV_8(ACPI_ROUND_DOWN(field_bit_offset, 8)); 106 field_byte_end_offset = ACPI_DIV_8(ACPI_ROUND_UP(field_bit_length + 107 field_bit_offset, 8)); 108 field_byte_length = field_byte_end_offset - field_byte_offset; 109 110 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 111 "Bit length %u, Bit offset %u\n", 112 field_bit_length, field_bit_offset)); 113 114 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 115 "Byte Length %u, Byte Offset %u, End Offset %u\n", 116 field_byte_length, field_byte_offset, 117 field_byte_end_offset)); 118 119 /* 120 * Iterative search for the maximum access width that is both aligned 121 * and does not go beyond the end of the region 122 * 123 * Start at byte_acc and work upwards to qword_acc max. (1,2,4,8 bytes) 124 */ 125 for (access_byte_width = 1; access_byte_width <= 8; 126 access_byte_width <<= 1) { 127 /* 128 * 1) Round end offset up to next access boundary and make sure that 129 * this does not go beyond the end of the parent region. 130 * 2) When the Access width is greater than the field_byte_length, we 131 * are done. (This does not optimize for the perfectly aligned 132 * case yet). 133 */ 134 if (ACPI_ROUND_UP(field_byte_end_offset, access_byte_width) <= 135 region_length) { 136 field_start_offset = 137 ACPI_ROUND_DOWN(field_byte_offset, 138 access_byte_width) / 139 access_byte_width; 140 141 field_end_offset = 142 ACPI_ROUND_UP((field_byte_length + 143 field_byte_offset), 144 access_byte_width) / 145 access_byte_width; 146 147 accesses = field_end_offset - field_start_offset; 148 149 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 150 "AccessWidth %u end is within region\n", 151 access_byte_width)); 152 153 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 154 "Field Start %u, Field End %u -- requires %u accesses\n", 155 field_start_offset, field_end_offset, 156 accesses)); 157 158 /* Single access is optimal */ 159 160 if (accesses <= 1) { 161 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 162 "Entire field can be accessed with one operation of size %u\n", 163 access_byte_width)); 164 return_VALUE(access_byte_width); 165 } 166 167 /* 168 * Fits in the region, but requires more than one read/write. 169 * try the next wider access on next iteration 170 */ 171 if (accesses < minimum_accesses) { 172 minimum_accesses = accesses; 173 minimum_access_width = access_byte_width; 174 } 175 } else { 176 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 177 "AccessWidth %u end is NOT within region\n", 178 access_byte_width)); 179 if (access_byte_width == 1) { 180 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 181 "Field goes beyond end-of-region!\n")); 182 183 /* Field does not fit in the region at all */ 184 185 return_VALUE(0); 186 } 187 188 /* 189 * This width goes beyond the end-of-region, back off to 190 * previous access 191 */ 192 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 193 "Backing off to previous optimal access width of %u\n", 194 minimum_access_width)); 195 return_VALUE(minimum_access_width); 196 } 197 } 198 199 /* 200 * Could not read/write field with one operation, 201 * just use max access width 202 */ 203 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 204 "Cannot access field in one operation, using width 8\n")); 205 return_VALUE(8); 206 } 207 #endif /* ACPI_UNDER_DEVELOPMENT */ 208 209 /******************************************************************************* 210 * 211 * FUNCTION: acpi_ex_decode_field_access 212 * 213 * PARAMETERS: obj_desc - Field object 214 * field_flags - Encoded fieldflags (contains access bits) 215 * return_byte_alignment - Where the byte alignment is returned 216 * 217 * RETURN: Field granularity (8, 16, 32 or 64) and 218 * byte_alignment (1, 2, 3, or 4) 219 * 220 * DESCRIPTION: Decode the access_type bits of a field definition. 221 * 222 ******************************************************************************/ 223 224 static u32 225 acpi_ex_decode_field_access(union acpi_operand_object *obj_desc, 226 u8 field_flags, u32 * return_byte_alignment) 227 { 228 u32 access; 229 u32 byte_alignment; 230 u32 bit_length; 231 232 ACPI_FUNCTION_TRACE(ex_decode_field_access); 233 234 access = (field_flags & AML_FIELD_ACCESS_TYPE_MASK); 235 236 switch (access) { 237 case AML_FIELD_ACCESS_ANY: 238 239 #ifdef ACPI_UNDER_DEVELOPMENT 240 byte_alignment = 241 acpi_ex_generate_access(obj_desc->common_field. 242 start_field_bit_offset, 243 obj_desc->common_field.bit_length, 244 0xFFFFFFFF 245 /* Temp until we pass region_length as parameter */ 246 ); 247 bit_length = byte_alignment * 8; 248 #endif 249 250 byte_alignment = 1; 251 bit_length = 8; 252 break; 253 254 case AML_FIELD_ACCESS_BYTE: 255 case AML_FIELD_ACCESS_BUFFER: /* ACPI 2.0 (SMBus Buffer) */ 256 257 byte_alignment = 1; 258 bit_length = 8; 259 break; 260 261 case AML_FIELD_ACCESS_WORD: 262 263 byte_alignment = 2; 264 bit_length = 16; 265 break; 266 267 case AML_FIELD_ACCESS_DWORD: 268 269 byte_alignment = 4; 270 bit_length = 32; 271 break; 272 273 case AML_FIELD_ACCESS_QWORD: /* ACPI 2.0 */ 274 275 byte_alignment = 8; 276 bit_length = 64; 277 break; 278 279 default: 280 281 /* Invalid field access type */ 282 283 ACPI_ERROR((AE_INFO, "Unknown field access type 0x%X", access)); 284 return_UINT32(0); 285 } 286 287 if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { 288 /* 289 * buffer_field access can be on any byte boundary, so the 290 * byte_alignment is always 1 byte -- regardless of any byte_alignment 291 * implied by the field access type. 292 */ 293 byte_alignment = 1; 294 } 295 296 *return_byte_alignment = byte_alignment; 297 return_UINT32(bit_length); 298 } 299 300 /******************************************************************************* 301 * 302 * FUNCTION: acpi_ex_prep_common_field_object 303 * 304 * PARAMETERS: obj_desc - The field object 305 * field_flags - Access, lock_rule, and update_rule. 306 * The format of a field_flag is described 307 * in the ACPI specification 308 * field_attribute - Special attributes (not used) 309 * field_bit_position - Field start position 310 * field_bit_length - Field length in number of bits 311 * 312 * RETURN: Status 313 * 314 * DESCRIPTION: Initialize the areas of the field object that are common 315 * to the various types of fields. Note: This is very "sensitive" 316 * code because we are solving the general case for field 317 * alignment. 318 * 319 ******************************************************************************/ 320 321 acpi_status 322 acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc, 323 u8 field_flags, 324 u8 field_attribute, 325 u32 field_bit_position, u32 field_bit_length) 326 { 327 u32 access_bit_width; 328 u32 byte_alignment; 329 u32 nearest_byte_address; 330 331 ACPI_FUNCTION_TRACE(ex_prep_common_field_object); 332 333 /* 334 * Note: the structure being initialized is the 335 * ACPI_COMMON_FIELD_INFO; No structure fields outside of the common 336 * area are initialized by this procedure. 337 */ 338 obj_desc->common_field.field_flags = field_flags; 339 obj_desc->common_field.attribute = field_attribute; 340 obj_desc->common_field.bit_length = field_bit_length; 341 342 /* 343 * Decode the access type so we can compute offsets. The access type gives 344 * two pieces of information - the width of each field access and the 345 * necessary byte_alignment (address granularity) of the access. 346 * 347 * For any_acc, the access_bit_width is the largest width that is both 348 * necessary and possible in an attempt to access the whole field in one 349 * I/O operation. However, for any_acc, the byte_alignment is always one 350 * byte. 351 * 352 * For all Buffer Fields, the byte_alignment is always one byte. 353 * 354 * For all other access types (Byte, Word, Dword, Qword), the Bitwidth is 355 * the same (equivalent) as the byte_alignment. 356 */ 357 access_bit_width = acpi_ex_decode_field_access(obj_desc, field_flags, 358 &byte_alignment); 359 if (!access_bit_width) { 360 return_ACPI_STATUS(AE_AML_OPERAND_VALUE); 361 } 362 363 /* Setup width (access granularity) fields (values are: 1, 2, 4, 8) */ 364 365 obj_desc->common_field.access_byte_width = (u8) 366 ACPI_DIV_8(access_bit_width); 367 368 /* 369 * base_byte_offset is the address of the start of the field within the 370 * region. It is the byte address of the first *datum* (field-width data 371 * unit) of the field. (i.e., the first datum that contains at least the 372 * first *bit* of the field.) 373 * 374 * Note: byte_alignment is always either equal to the access_bit_width or 8 375 * (Byte access), and it defines the addressing granularity of the parent 376 * region or buffer. 377 */ 378 nearest_byte_address = 379 ACPI_ROUND_BITS_DOWN_TO_BYTES(field_bit_position); 380 obj_desc->common_field.base_byte_offset = (u32) 381 ACPI_ROUND_DOWN(nearest_byte_address, byte_alignment); 382 383 /* 384 * start_field_bit_offset is the offset of the first bit of the field within 385 * a field datum. 386 */ 387 obj_desc->common_field.start_field_bit_offset = (u8) 388 (field_bit_position - 389 ACPI_MUL_8(obj_desc->common_field.base_byte_offset)); 390 391 return_ACPI_STATUS(AE_OK); 392 } 393 394 /******************************************************************************* 395 * 396 * FUNCTION: acpi_ex_prep_field_value 397 * 398 * PARAMETERS: info - Contains all field creation info 399 * 400 * RETURN: Status 401 * 402 * DESCRIPTION: Construct an object of type union acpi_operand_object with a 403 * subtype of def_field and connect it to the parent Node. 404 * 405 ******************************************************************************/ 406 407 acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info) 408 { 409 union acpi_operand_object *obj_desc; 410 union acpi_operand_object *second_desc = NULL; 411 acpi_status status; 412 u32 access_byte_width; 413 u32 type; 414 415 ACPI_FUNCTION_TRACE(ex_prep_field_value); 416 417 /* Parameter validation */ 418 419 if (info->field_type != ACPI_TYPE_LOCAL_INDEX_FIELD) { 420 if (!info->region_node) { 421 ACPI_ERROR((AE_INFO, "Null RegionNode")); 422 return_ACPI_STATUS(AE_AML_NO_OPERAND); 423 } 424 425 type = acpi_ns_get_type(info->region_node); 426 if (type != ACPI_TYPE_REGION) { 427 ACPI_ERROR((AE_INFO, 428 "Needed Region, found type 0x%X (%s)", type, 429 acpi_ut_get_type_name(type))); 430 431 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 432 } 433 } 434 435 /* Allocate a new field object */ 436 437 obj_desc = acpi_ut_create_internal_object(info->field_type); 438 if (!obj_desc) { 439 return_ACPI_STATUS(AE_NO_MEMORY); 440 } 441 442 /* Initialize areas of the object that are common to all fields */ 443 444 obj_desc->common_field.node = info->field_node; 445 status = acpi_ex_prep_common_field_object(obj_desc, 446 info->field_flags, 447 info->attribute, 448 info->field_bit_position, 449 info->field_bit_length); 450 if (ACPI_FAILURE(status)) { 451 acpi_ut_delete_object_desc(obj_desc); 452 return_ACPI_STATUS(status); 453 } 454 455 /* Initialize areas of the object that are specific to the field type */ 456 457 switch (info->field_type) { 458 case ACPI_TYPE_LOCAL_REGION_FIELD: 459 460 obj_desc->field.region_obj = 461 acpi_ns_get_attached_object(info->region_node); 462 463 /* Fields specific to generic_serial_bus fields */ 464 465 obj_desc->field.access_length = info->access_length; 466 467 if (info->connection_node) { 468 second_desc = info->connection_node->object; 469 if (!(second_desc->common.flags & AOPOBJ_DATA_VALID)) { 470 status = 471 acpi_ds_get_buffer_arguments(second_desc); 472 if (ACPI_FAILURE(status)) { 473 acpi_ut_delete_object_desc(obj_desc); 474 return_ACPI_STATUS(status); 475 } 476 } 477 478 obj_desc->field.resource_buffer = 479 second_desc->buffer.pointer; 480 obj_desc->field.resource_length = 481 (u16)second_desc->buffer.length; 482 } else if (info->resource_buffer) { 483 obj_desc->field.resource_buffer = info->resource_buffer; 484 obj_desc->field.resource_length = info->resource_length; 485 } 486 487 obj_desc->field.pin_number_index = info->pin_number_index; 488 489 /* Allow full data read from EC address space */ 490 491 if ((obj_desc->field.region_obj->region.space_id == 492 ACPI_ADR_SPACE_EC) 493 && (obj_desc->common_field.bit_length > 8)) { 494 access_byte_width = 495 ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field. 496 bit_length); 497 498 /* Maximum byte width supported is 255 */ 499 500 if (access_byte_width < 256) { 501 obj_desc->common_field.access_byte_width = 502 (u8)access_byte_width; 503 } 504 } 505 /* An additional reference for the container */ 506 507 acpi_ut_add_reference(obj_desc->field.region_obj); 508 509 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 510 "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n", 511 obj_desc->field.start_field_bit_offset, 512 obj_desc->field.base_byte_offset, 513 obj_desc->field.access_byte_width, 514 obj_desc->field.region_obj)); 515 break; 516 517 case ACPI_TYPE_LOCAL_BANK_FIELD: 518 519 obj_desc->bank_field.value = info->bank_value; 520 obj_desc->bank_field.region_obj = 521 acpi_ns_get_attached_object(info->region_node); 522 obj_desc->bank_field.bank_obj = 523 acpi_ns_get_attached_object(info->register_node); 524 525 /* An additional reference for the attached objects */ 526 527 acpi_ut_add_reference(obj_desc->bank_field.region_obj); 528 acpi_ut_add_reference(obj_desc->bank_field.bank_obj); 529 530 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 531 "Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n", 532 obj_desc->bank_field.start_field_bit_offset, 533 obj_desc->bank_field.base_byte_offset, 534 obj_desc->field.access_byte_width, 535 obj_desc->bank_field.region_obj, 536 obj_desc->bank_field.bank_obj)); 537 538 /* 539 * Remember location in AML stream of the field unit 540 * opcode and operands -- since the bank_value 541 * operands must be evaluated. 542 */ 543 second_desc = obj_desc->common.next_object; 544 second_desc->extra.aml_start = 545 ACPI_CAST_PTR(union acpi_parse_object, 546 info->data_register_node)->named.data; 547 second_desc->extra.aml_length = 548 ACPI_CAST_PTR(union acpi_parse_object, 549 info->data_register_node)->named.length; 550 551 break; 552 553 case ACPI_TYPE_LOCAL_INDEX_FIELD: 554 555 /* Get the Index and Data registers */ 556 557 obj_desc->index_field.index_obj = 558 acpi_ns_get_attached_object(info->register_node); 559 obj_desc->index_field.data_obj = 560 acpi_ns_get_attached_object(info->data_register_node); 561 562 if (!obj_desc->index_field.data_obj 563 || !obj_desc->index_field.index_obj) { 564 ACPI_ERROR((AE_INFO, 565 "Null Index Object during field prep")); 566 acpi_ut_delete_object_desc(obj_desc); 567 return_ACPI_STATUS(AE_AML_INTERNAL); 568 } 569 570 /* An additional reference for the attached objects */ 571 572 acpi_ut_add_reference(obj_desc->index_field.data_obj); 573 acpi_ut_add_reference(obj_desc->index_field.index_obj); 574 575 /* 576 * April 2006: Changed to match MS behavior 577 * 578 * The value written to the Index register is the byte offset of the 579 * target field in units of the granularity of the index_field 580 * 581 * Previously, the value was calculated as an index in terms of the 582 * width of the Data register, as below: 583 * 584 * obj_desc->index_field.Value = (u32) 585 * (Info->field_bit_position / ACPI_MUL_8 ( 586 * obj_desc->Field.access_byte_width)); 587 * 588 * February 2006: Tried value as a byte offset: 589 * obj_desc->index_field.Value = (u32) 590 * ACPI_DIV_8 (Info->field_bit_position); 591 */ 592 obj_desc->index_field.value = 593 (u32) ACPI_ROUND_DOWN(ACPI_DIV_8(info->field_bit_position), 594 obj_desc->index_field. 595 access_byte_width); 596 597 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 598 "IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n", 599 obj_desc->index_field.start_field_bit_offset, 600 obj_desc->index_field.base_byte_offset, 601 obj_desc->index_field.value, 602 obj_desc->field.access_byte_width, 603 obj_desc->index_field.index_obj, 604 obj_desc->index_field.data_obj)); 605 break; 606 607 default: 608 609 /* No other types should get here */ 610 611 break; 612 } 613 614 /* 615 * Store the constructed descriptor (obj_desc) into the parent Node, 616 * preserving the current type of that named_obj. 617 */ 618 status = acpi_ns_attach_object(info->field_node, obj_desc, 619 acpi_ns_get_type(info->field_node)); 620 621 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 622 "Set NamedObj %p [%4.4s], ObjDesc %p\n", 623 info->field_node, 624 acpi_ut_get_node_name(info->field_node), obj_desc)); 625 626 /* Remove local reference to the object */ 627 628 acpi_ut_remove_reference(obj_desc); 629 return_ACPI_STATUS(status); 630 } 631