1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 2 /****************************************************************************** 3 * 4 * Module Name: exfield - AML execution - field_unit read/write 5 * 6 * Copyright (C) 2000 - 2020, Intel Corp. 7 * 8 *****************************************************************************/ 9 10 #include <acpi/acpi.h> 11 #include "accommon.h" 12 #include "acdispat.h" 13 #include "acinterp.h" 14 #include "amlcode.h" 15 16 #define _COMPONENT ACPI_EXECUTER 17 ACPI_MODULE_NAME("exfield") 18 19 /* 20 * This table maps the various Attrib protocols to the byte transfer 21 * length. Used for the generic serial bus. 22 */ 23 #define ACPI_INVALID_PROTOCOL_ID 0x80 24 #define ACPI_MAX_PROTOCOL_ID 0x0F 25 const u8 acpi_protocol_lengths[] = { 26 ACPI_INVALID_PROTOCOL_ID, /* 0 - reserved */ 27 ACPI_INVALID_PROTOCOL_ID, /* 1 - reserved */ 28 0x00, /* 2 - ATTRIB_QUICK */ 29 ACPI_INVALID_PROTOCOL_ID, /* 3 - reserved */ 30 0x01, /* 4 - ATTRIB_SEND_RECEIVE */ 31 ACPI_INVALID_PROTOCOL_ID, /* 5 - reserved */ 32 0x01, /* 6 - ATTRIB_BYTE */ 33 ACPI_INVALID_PROTOCOL_ID, /* 7 - reserved */ 34 0x02, /* 8 - ATTRIB_WORD */ 35 ACPI_INVALID_PROTOCOL_ID, /* 9 - reserved */ 36 0xFF, /* A - ATTRIB_BLOCK */ 37 0xFF, /* B - ATTRIB_BYTES */ 38 0x02, /* C - ATTRIB_PROCESS_CALL */ 39 0xFF, /* D - ATTRIB_BLOCK_PROCESS_CALL */ 40 0xFF, /* E - ATTRIB_RAW_BYTES */ 41 0xFF /* F - ATTRIB_RAW_PROCESS_BYTES */ 42 }; 43 44 #define PCC_MASTER_SUBSPACE 3 45 46 /* 47 * The following macros determine a given offset is a COMD field. 48 * According to the specification, generic subspaces (types 0-2) contains a 49 * 2-byte COMD field at offset 4 and master subspaces (type 3) contains a 4-byte 50 * COMD field starting at offset 12. 51 */ 52 #define GENERIC_SUBSPACE_COMMAND(a) (4 == a || a == 5) 53 #define MASTER_SUBSPACE_COMMAND(a) (12 <= a && a <= 15) 54 55 /******************************************************************************* 56 * 57 * FUNCTION: acpi_ex_get_protocol_buffer_length 58 * 59 * PARAMETERS: protocol_id - The type of the protocol indicated by region 60 * field access attributes 61 * return_length - Where the protocol byte transfer length is 62 * returned 63 * 64 * RETURN: Status and decoded byte transfer length 65 * 66 * DESCRIPTION: This routine returns the length of the generic_serial_bus 67 * protocol bytes 68 * 69 ******************************************************************************/ 70 71 acpi_status 72 acpi_ex_get_protocol_buffer_length(u32 protocol_id, u32 *return_length) 73 { 74 75 if ((protocol_id > ACPI_MAX_PROTOCOL_ID) || 76 (acpi_protocol_lengths[protocol_id] == ACPI_INVALID_PROTOCOL_ID)) { 77 ACPI_ERROR((AE_INFO, 78 "Invalid Field/AccessAs protocol ID: 0x%4.4X", 79 protocol_id)); 80 81 return (AE_AML_PROTOCOL); 82 } 83 84 *return_length = acpi_protocol_lengths[protocol_id]; 85 return (AE_OK); 86 } 87 88 /******************************************************************************* 89 * 90 * FUNCTION: acpi_ex_read_data_from_field 91 * 92 * PARAMETERS: walk_state - Current execution state 93 * obj_desc - The named field 94 * ret_buffer_desc - Where the return data object is stored 95 * 96 * RETURN: Status 97 * 98 * DESCRIPTION: Read from a named field. Returns either an Integer or a 99 * Buffer, depending on the size of the field and whether if a 100 * field is created by the create_field() operator. 101 * 102 ******************************************************************************/ 103 104 acpi_status 105 acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, 106 union acpi_operand_object *obj_desc, 107 union acpi_operand_object **ret_buffer_desc) 108 { 109 acpi_status status; 110 union acpi_operand_object *buffer_desc; 111 void *buffer; 112 u32 buffer_length; 113 114 ACPI_FUNCTION_TRACE_PTR(ex_read_data_from_field, obj_desc); 115 116 /* Parameter validation */ 117 118 if (!obj_desc) { 119 return_ACPI_STATUS(AE_AML_NO_OPERAND); 120 } 121 if (!ret_buffer_desc) { 122 return_ACPI_STATUS(AE_BAD_PARAMETER); 123 } 124 125 if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { 126 /* 127 * If the buffer_field arguments have not been previously evaluated, 128 * evaluate them now and save the results. 129 */ 130 if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { 131 status = acpi_ds_get_buffer_field_arguments(obj_desc); 132 if (ACPI_FAILURE(status)) { 133 return_ACPI_STATUS(status); 134 } 135 } 136 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 137 (obj_desc->field.region_obj->region.space_id == 138 ACPI_ADR_SPACE_SMBUS 139 || obj_desc->field.region_obj->region.space_id == 140 ACPI_ADR_SPACE_GSBUS 141 || obj_desc->field.region_obj->region.space_id == 142 ACPI_ADR_SPACE_IPMI)) { 143 144 /* SMBus, GSBus, IPMI serial */ 145 146 status = acpi_ex_read_serial_bus(obj_desc, ret_buffer_desc); 147 return_ACPI_STATUS(status); 148 } 149 150 /* 151 * Allocate a buffer for the contents of the field. 152 * 153 * If the field is larger than the current integer width, create 154 * a BUFFER to hold it. Otherwise, use an INTEGER. This allows 155 * the use of arithmetic operators on the returned value if the 156 * field size is equal or smaller than an Integer. 157 * 158 * However, all buffer fields created by create_field operator needs to 159 * remain as a buffer to match other AML interpreter implementations. 160 * 161 * Note: Field.length is in bits. 162 */ 163 buffer_length = 164 (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field.bit_length); 165 166 if (buffer_length > acpi_gbl_integer_byte_width || 167 (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD && 168 obj_desc->buffer_field.is_create_field)) { 169 170 /* Field is too large for an Integer, create a Buffer instead */ 171 172 buffer_desc = acpi_ut_create_buffer_object(buffer_length); 173 if (!buffer_desc) { 174 return_ACPI_STATUS(AE_NO_MEMORY); 175 } 176 buffer = buffer_desc->buffer.pointer; 177 } else { 178 /* Field will fit within an Integer (normal case) */ 179 180 buffer_desc = acpi_ut_create_integer_object((u64) 0); 181 if (!buffer_desc) { 182 return_ACPI_STATUS(AE_NO_MEMORY); 183 } 184 185 buffer_length = acpi_gbl_integer_byte_width; 186 buffer = &buffer_desc->integer.value; 187 } 188 189 if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 190 (obj_desc->field.region_obj->region.space_id == 191 ACPI_ADR_SPACE_GPIO)) { 192 193 /* General Purpose I/O */ 194 195 status = acpi_ex_read_gpio(obj_desc, buffer); 196 goto exit; 197 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 198 (obj_desc->field.region_obj->region.space_id == 199 ACPI_ADR_SPACE_PLATFORM_COMM)) { 200 /* 201 * Reading from a PCC field unit does not require the handler because 202 * it only requires reading from the internal_pcc_buffer. 203 */ 204 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 205 "PCC FieldRead bits %u\n", 206 obj_desc->field.bit_length)); 207 208 memcpy(buffer, 209 obj_desc->field.region_obj->field.internal_pcc_buffer + 210 obj_desc->field.base_byte_offset, 211 (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field. 212 bit_length)); 213 214 *ret_buffer_desc = buffer_desc; 215 return AE_OK; 216 } 217 218 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 219 "FieldRead [TO]: Obj %p, Type %X, Buf %p, ByteLen %X\n", 220 obj_desc, obj_desc->common.type, buffer, 221 buffer_length)); 222 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 223 "FieldRead [FROM]: BitLen %X, BitOff %X, ByteOff %X\n", 224 obj_desc->common_field.bit_length, 225 obj_desc->common_field.start_field_bit_offset, 226 obj_desc->common_field.base_byte_offset)); 227 228 /* Lock entire transaction if requested */ 229 230 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 231 232 /* Read from the field */ 233 234 status = acpi_ex_extract_from_field(obj_desc, buffer, buffer_length); 235 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 236 237 exit: 238 if (ACPI_FAILURE(status)) { 239 acpi_ut_remove_reference(buffer_desc); 240 } else { 241 *ret_buffer_desc = buffer_desc; 242 } 243 244 return_ACPI_STATUS(status); 245 } 246 247 /******************************************************************************* 248 * 249 * FUNCTION: acpi_ex_write_data_to_field 250 * 251 * PARAMETERS: source_desc - Contains data to write 252 * obj_desc - The named field 253 * result_desc - Where the return value is returned, if any 254 * 255 * RETURN: Status 256 * 257 * DESCRIPTION: Write to a named field 258 * 259 ******************************************************************************/ 260 261 acpi_status 262 acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, 263 union acpi_operand_object *obj_desc, 264 union acpi_operand_object **result_desc) 265 { 266 acpi_status status; 267 u32 buffer_length; 268 u32 data_length; 269 void *buffer; 270 271 ACPI_FUNCTION_TRACE_PTR(ex_write_data_to_field, obj_desc); 272 273 /* Parameter validation */ 274 275 if (!source_desc || !obj_desc) { 276 return_ACPI_STATUS(AE_AML_NO_OPERAND); 277 } 278 279 if (obj_desc->common.type == ACPI_TYPE_BUFFER_FIELD) { 280 /* 281 * If the buffer_field arguments have not been previously evaluated, 282 * evaluate them now and save the results. 283 */ 284 if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) { 285 status = acpi_ds_get_buffer_field_arguments(obj_desc); 286 if (ACPI_FAILURE(status)) { 287 return_ACPI_STATUS(status); 288 } 289 } 290 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 291 (obj_desc->field.region_obj->region.space_id == 292 ACPI_ADR_SPACE_GPIO)) { 293 294 /* General Purpose I/O */ 295 296 status = acpi_ex_write_gpio(source_desc, obj_desc, result_desc); 297 return_ACPI_STATUS(status); 298 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 299 (obj_desc->field.region_obj->region.space_id == 300 ACPI_ADR_SPACE_SMBUS 301 || obj_desc->field.region_obj->region.space_id == 302 ACPI_ADR_SPACE_GSBUS 303 || obj_desc->field.region_obj->region.space_id == 304 ACPI_ADR_SPACE_IPMI)) { 305 306 /* SMBus, GSBus, IPMI serial */ 307 308 status = 309 acpi_ex_write_serial_bus(source_desc, obj_desc, 310 result_desc); 311 return_ACPI_STATUS(status); 312 } else if ((obj_desc->common.type == ACPI_TYPE_LOCAL_REGION_FIELD) && 313 (obj_desc->field.region_obj->region.space_id == 314 ACPI_ADR_SPACE_PLATFORM_COMM)) { 315 /* 316 * According to the spec a write to the COMD field will invoke the 317 * region handler. Otherwise, write to the pcc_internal buffer. This 318 * implementation will use the offsets specified rather than the name 319 * of the field. This is considered safer because some firmware tools 320 * are known to obfiscate named objects. 321 */ 322 data_length = 323 (acpi_size)ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->field. 324 bit_length); 325 memcpy(obj_desc->field.region_obj->field.internal_pcc_buffer + 326 obj_desc->field.base_byte_offset, 327 source_desc->buffer.pointer, data_length); 328 329 if ((obj_desc->field.region_obj->region.address == 330 PCC_MASTER_SUBSPACE 331 && MASTER_SUBSPACE_COMMAND(obj_desc->field. 332 base_byte_offset)) 333 || GENERIC_SUBSPACE_COMMAND(obj_desc->field. 334 base_byte_offset)) { 335 336 /* Perform the write */ 337 338 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 339 "PCC COMD field has been written. Invoking PCC handler now.\n")); 340 341 status = 342 acpi_ex_access_region(obj_desc, 0, 343 (u64 *)obj_desc->field. 344 region_obj->field. 345 internal_pcc_buffer, 346 ACPI_WRITE); 347 return_ACPI_STATUS(status); 348 } 349 return (AE_OK); 350 } 351 352 /* Get a pointer to the data to be written */ 353 354 switch (source_desc->common.type) { 355 case ACPI_TYPE_INTEGER: 356 357 buffer = &source_desc->integer.value; 358 buffer_length = sizeof(source_desc->integer.value); 359 break; 360 361 case ACPI_TYPE_BUFFER: 362 363 buffer = source_desc->buffer.pointer; 364 buffer_length = source_desc->buffer.length; 365 break; 366 367 case ACPI_TYPE_STRING: 368 369 buffer = source_desc->string.pointer; 370 buffer_length = source_desc->string.length; 371 break; 372 373 default: 374 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 375 } 376 377 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 378 "FieldWrite [FROM]: Obj %p (%s:%X), Buf %p, ByteLen %X\n", 379 source_desc, 380 acpi_ut_get_type_name(source_desc->common.type), 381 source_desc->common.type, buffer, buffer_length)); 382 383 ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, 384 "FieldWrite [TO]: Obj %p (%s:%X), BitLen %X, BitOff %X, ByteOff %X\n", 385 obj_desc, 386 acpi_ut_get_type_name(obj_desc->common.type), 387 obj_desc->common.type, 388 obj_desc->common_field.bit_length, 389 obj_desc->common_field.start_field_bit_offset, 390 obj_desc->common_field.base_byte_offset)); 391 392 /* Lock entire transaction if requested */ 393 394 acpi_ex_acquire_global_lock(obj_desc->common_field.field_flags); 395 396 /* Write to the field */ 397 398 status = acpi_ex_insert_into_field(obj_desc, buffer, buffer_length); 399 acpi_ex_release_global_lock(obj_desc->common_field.field_flags); 400 return_ACPI_STATUS(status); 401 } 402