1 /****************************************************************************** 2 * 3 * Module Name: evgpeinit - System GPE initialization and update 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2015, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 #include "acevents.h" 47 #include "acnamesp.h" 48 49 #define _COMPONENT ACPI_EVENTS 50 ACPI_MODULE_NAME("evgpeinit") 51 #if (!ACPI_REDUCED_HARDWARE) /* Entire module */ 52 /* 53 * Note: History of _PRW support in ACPICA 54 * 55 * Originally (2000 - 2010), the GPE initialization code performed a walk of 56 * the entire namespace to execute the _PRW methods and detect all GPEs 57 * capable of waking the system. 58 * 59 * As of 10/2010, the _PRW method execution has been removed since it is 60 * actually unnecessary. The host OS must in fact execute all _PRW methods 61 * in order to identify the device/power-resource dependencies. We now put 62 * the onus on the host OS to identify the wake GPEs as part of this process 63 * and to inform ACPICA of these GPEs via the acpi_setup_gpe_for_wake interface. This 64 * not only reduces the complexity of the ACPICA initialization code, but in 65 * some cases (on systems with very large namespaces) it should reduce the 66 * kernel boot time as well. 67 */ 68 69 /******************************************************************************* 70 * 71 * FUNCTION: acpi_ev_gpe_initialize 72 * 73 * PARAMETERS: None 74 * 75 * RETURN: Status 76 * 77 * DESCRIPTION: Initialize the GPE data structures and the FADT GPE 0/1 blocks 78 * 79 ******************************************************************************/ 80 acpi_status acpi_ev_gpe_initialize(void) 81 { 82 u32 register_count0 = 0; 83 u32 register_count1 = 0; 84 u32 gpe_number_max = 0; 85 acpi_status status; 86 87 ACPI_FUNCTION_TRACE(ev_gpe_initialize); 88 89 ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, 90 "Initializing General Purpose Events (GPEs):\n")); 91 92 status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); 93 if (ACPI_FAILURE(status)) { 94 return_ACPI_STATUS(status); 95 } 96 97 /* 98 * Initialize the GPE Block(s) defined in the FADT 99 * 100 * Why the GPE register block lengths are divided by 2: From the ACPI 101 * Spec, section "General-Purpose Event Registers", we have: 102 * 103 * "Each register block contains two registers of equal length 104 * GPEx_STS and GPEx_EN (where x is 0 or 1). The length of the 105 * GPE0_STS and GPE0_EN registers is equal to half the GPE0_LEN 106 * The length of the GPE1_STS and GPE1_EN registers is equal to 107 * half the GPE1_LEN. If a generic register block is not supported 108 * then its respective block pointer and block length values in the 109 * FADT table contain zeros. The GPE0_LEN and GPE1_LEN do not need 110 * to be the same size." 111 */ 112 113 /* 114 * Determine the maximum GPE number for this machine. 115 * 116 * Note: both GPE0 and GPE1 are optional, and either can exist without 117 * the other. 118 * 119 * If EITHER the register length OR the block address are zero, then that 120 * particular block is not supported. 121 */ 122 if (acpi_gbl_FADT.gpe0_block_length && 123 acpi_gbl_FADT.xgpe0_block.address) { 124 125 /* GPE block 0 exists (has both length and address > 0) */ 126 127 register_count0 = (u16)(acpi_gbl_FADT.gpe0_block_length / 2); 128 gpe_number_max = 129 (register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1; 130 131 /* Install GPE Block 0 */ 132 133 status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device, 134 acpi_gbl_FADT.xgpe0_block. 135 address, 136 acpi_gbl_FADT.xgpe0_block. 137 space_id, register_count0, 0, 138 acpi_gbl_FADT.sci_interrupt, 139 &acpi_gbl_gpe_fadt_blocks[0]); 140 141 if (ACPI_FAILURE(status)) { 142 ACPI_EXCEPTION((AE_INFO, status, 143 "Could not create GPE Block 0")); 144 } 145 } 146 147 if (acpi_gbl_FADT.gpe1_block_length && 148 acpi_gbl_FADT.xgpe1_block.address) { 149 150 /* GPE block 1 exists (has both length and address > 0) */ 151 152 register_count1 = (u16)(acpi_gbl_FADT.gpe1_block_length / 2); 153 154 /* Check for GPE0/GPE1 overlap (if both banks exist) */ 155 156 if ((register_count0) && 157 (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) { 158 ACPI_ERROR((AE_INFO, 159 "GPE0 block (GPE 0 to %u) overlaps the GPE1 block " 160 "(GPE %u to %u) - Ignoring GPE1", 161 gpe_number_max, acpi_gbl_FADT.gpe1_base, 162 acpi_gbl_FADT.gpe1_base + 163 ((register_count1 * 164 ACPI_GPE_REGISTER_WIDTH) - 1))); 165 166 /* Ignore GPE1 block by setting the register count to zero */ 167 168 register_count1 = 0; 169 } else { 170 /* Install GPE Block 1 */ 171 172 status = 173 acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device, 174 acpi_gbl_FADT.xgpe1_block. 175 address, 176 acpi_gbl_FADT.xgpe1_block. 177 space_id, register_count1, 178 acpi_gbl_FADT.gpe1_base, 179 acpi_gbl_FADT. 180 sci_interrupt, 181 &acpi_gbl_gpe_fadt_blocks 182 [1]); 183 184 if (ACPI_FAILURE(status)) { 185 ACPI_EXCEPTION((AE_INFO, status, 186 "Could not create GPE Block 1")); 187 } 188 189 /* 190 * GPE0 and GPE1 do not have to be contiguous in the GPE number 191 * space. However, GPE0 always starts at GPE number zero. 192 */ 193 gpe_number_max = acpi_gbl_FADT.gpe1_base + 194 ((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1); 195 } 196 } 197 198 /* Exit if there are no GPE registers */ 199 200 if ((register_count0 + register_count1) == 0) { 201 202 /* GPEs are not required by ACPI, this is OK */ 203 204 ACPI_DEBUG_PRINT((ACPI_DB_INIT, 205 "There are no GPE blocks defined in the FADT\n")); 206 status = AE_OK; 207 goto cleanup; 208 } 209 210 cleanup: 211 (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); 212 return_ACPI_STATUS(AE_OK); 213 } 214 215 /******************************************************************************* 216 * 217 * FUNCTION: acpi_ev_update_gpes 218 * 219 * PARAMETERS: table_owner_id - ID of the newly-loaded ACPI table 220 * 221 * RETURN: None 222 * 223 * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a 224 * result of a Load() or load_table() operation. If new GPE 225 * methods have been installed, register the new methods. 226 * 227 ******************************************************************************/ 228 229 void acpi_ev_update_gpes(acpi_owner_id table_owner_id) 230 { 231 struct acpi_gpe_xrupt_info *gpe_xrupt_info; 232 struct acpi_gpe_block_info *gpe_block; 233 struct acpi_gpe_walk_info walk_info; 234 acpi_status status = AE_OK; 235 236 /* 237 * Find any _Lxx/_Exx GPE methods that have just been loaded. 238 * 239 * Any GPEs that correspond to new _Lxx/_Exx methods are immediately 240 * enabled. 241 * 242 * Examine the namespace underneath each gpe_device within the 243 * gpe_block lists. 244 */ 245 status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); 246 if (ACPI_FAILURE(status)) { 247 return; 248 } 249 250 walk_info.count = 0; 251 walk_info.owner_id = table_owner_id; 252 walk_info.execute_by_owner_id = TRUE; 253 254 /* Walk the interrupt level descriptor list */ 255 256 gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head; 257 while (gpe_xrupt_info) { 258 259 /* Walk all Gpe Blocks attached to this interrupt level */ 260 261 gpe_block = gpe_xrupt_info->gpe_block_list_head; 262 while (gpe_block) { 263 walk_info.gpe_block = gpe_block; 264 walk_info.gpe_device = gpe_block->node; 265 266 status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, 267 walk_info.gpe_device, 268 ACPI_UINT32_MAX, 269 ACPI_NS_WALK_NO_UNLOCK, 270 acpi_ev_match_gpe_method, 271 NULL, &walk_info, NULL); 272 if (ACPI_FAILURE(status)) { 273 ACPI_EXCEPTION((AE_INFO, status, 274 "While decoding _Lxx/_Exx methods")); 275 } 276 277 gpe_block = gpe_block->next; 278 } 279 280 gpe_xrupt_info = gpe_xrupt_info->next; 281 } 282 283 if (walk_info.count) { 284 ACPI_INFO((AE_INFO, "Enabled %u new GPEs", walk_info.count)); 285 } 286 287 (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); 288 return; 289 } 290 291 /******************************************************************************* 292 * 293 * FUNCTION: acpi_ev_match_gpe_method 294 * 295 * PARAMETERS: Callback from walk_namespace 296 * 297 * RETURN: Status 298 * 299 * DESCRIPTION: Called from acpi_walk_namespace. Expects each object to be a 300 * control method under the _GPE portion of the namespace. 301 * Extract the name and GPE type from the object, saving this 302 * information for quick lookup during GPE dispatch. Allows a 303 * per-owner_id evaluation if execute_by_owner_id is TRUE in the 304 * walk_info parameter block. 305 * 306 * The name of each GPE control method is of the form: 307 * "_Lxx" or "_Exx", where: 308 * L - means that the GPE is level triggered 309 * E - means that the GPE is edge triggered 310 * xx - is the GPE number [in HEX] 311 * 312 * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods 313 * with that owner. 314 * 315 ******************************************************************************/ 316 317 acpi_status 318 acpi_ev_match_gpe_method(acpi_handle obj_handle, 319 u32 level, void *context, void **return_value) 320 { 321 struct acpi_namespace_node *method_node = 322 ACPI_CAST_PTR(struct acpi_namespace_node, obj_handle); 323 struct acpi_gpe_walk_info *walk_info = 324 ACPI_CAST_PTR(struct acpi_gpe_walk_info, context); 325 struct acpi_gpe_event_info *gpe_event_info; 326 u32 gpe_number; 327 char name[ACPI_NAME_SIZE + 1]; 328 u8 type; 329 330 ACPI_FUNCTION_TRACE(ev_match_gpe_method); 331 332 /* Check if requested owner_id matches this owner_id */ 333 334 if ((walk_info->execute_by_owner_id) && 335 (method_node->owner_id != walk_info->owner_id)) { 336 return_ACPI_STATUS(AE_OK); 337 } 338 339 /* 340 * Match and decode the _Lxx and _Exx GPE method names 341 * 342 * 1) Extract the method name and null terminate it 343 */ 344 ACPI_MOVE_32_TO_32(name, &method_node->name.integer); 345 name[ACPI_NAME_SIZE] = 0; 346 347 /* 2) Name must begin with an underscore */ 348 349 if (name[0] != '_') { 350 return_ACPI_STATUS(AE_OK); /* Ignore this method */ 351 } 352 353 /* 354 * 3) Edge/Level determination is based on the 2nd character 355 * of the method name 356 */ 357 switch (name[1]) { 358 case 'L': 359 360 type = ACPI_GPE_LEVEL_TRIGGERED; 361 break; 362 363 case 'E': 364 365 type = ACPI_GPE_EDGE_TRIGGERED; 366 break; 367 368 default: 369 370 /* Unknown method type, just ignore it */ 371 372 ACPI_DEBUG_PRINT((ACPI_DB_LOAD, 373 "Ignoring unknown GPE method type: %s " 374 "(name not of form _Lxx or _Exx)", name)); 375 return_ACPI_STATUS(AE_OK); 376 } 377 378 /* 4) The last two characters of the name are the hex GPE Number */ 379 380 gpe_number = strtoul(&name[2], NULL, 16); 381 if (gpe_number == ACPI_UINT32_MAX) { 382 383 /* Conversion failed; invalid method, just ignore it */ 384 385 ACPI_DEBUG_PRINT((ACPI_DB_LOAD, 386 "Could not extract GPE number from name: %s " 387 "(name is not of form _Lxx or _Exx)", name)); 388 return_ACPI_STATUS(AE_OK); 389 } 390 391 /* Ensure that we have a valid GPE number for this GPE block */ 392 393 gpe_event_info = 394 acpi_ev_low_get_gpe_info(gpe_number, walk_info->gpe_block); 395 if (!gpe_event_info) { 396 /* 397 * This gpe_number is not valid for this GPE block, just ignore it. 398 * However, it may be valid for a different GPE block, since GPE0 399 * and GPE1 methods both appear under \_GPE. 400 */ 401 return_ACPI_STATUS(AE_OK); 402 } 403 404 if ((ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == 405 ACPI_GPE_DISPATCH_HANDLER) || 406 (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == 407 ACPI_GPE_DISPATCH_RAW_HANDLER)) { 408 409 /* If there is already a handler, ignore this GPE method */ 410 411 return_ACPI_STATUS(AE_OK); 412 } 413 414 if (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags) == 415 ACPI_GPE_DISPATCH_METHOD) { 416 /* 417 * If there is already a method, ignore this method. But check 418 * for a type mismatch (if both the _Lxx AND _Exx exist) 419 */ 420 if (type != (gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) { 421 ACPI_ERROR((AE_INFO, 422 "For GPE 0x%.2X, found both _L%2.2X and _E%2.2X methods", 423 gpe_number, gpe_number, gpe_number)); 424 } 425 return_ACPI_STATUS(AE_OK); 426 } 427 428 /* Disable the GPE in case it's been enabled already. */ 429 430 (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); 431 432 /* 433 * Add the GPE information from above to the gpe_event_info block for 434 * use during dispatch of this GPE. 435 */ 436 gpe_event_info->flags &= ~(ACPI_GPE_DISPATCH_MASK); 437 gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD); 438 gpe_event_info->dispatch.method_node = method_node; 439 440 ACPI_DEBUG_PRINT((ACPI_DB_LOAD, 441 "Registered GPE method %s as GPE number 0x%.2X\n", 442 name, gpe_number)); 443 return_ACPI_STATUS(AE_OK); 444 } 445 446 #endif /* !ACPI_REDUCED_HARDWARE */ 447