1 /****************************************************************************** 2 * 3 * Module Name: dswload - Dispatcher first pass namespace load callbacks 4 * 5 *****************************************************************************/ 6 7 /* 8 * Copyright (C) 2000 - 2011, Intel Corp. 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions, and the following disclaimer, 16 * without modification. 17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 18 * substantially similar to the "NO WARRANTY" disclaimer below 19 * ("Disclaimer") and any redistribution must be conditioned upon 20 * including a substantially similar Disclaimer requirement for further 21 * binary redistribution. 22 * 3. Neither the names of the above-listed copyright holders nor the names 23 * of any contributors may be used to endorse or promote products derived 24 * from this software without specific prior written permission. 25 * 26 * Alternatively, this software may be distributed under the terms of the 27 * GNU General Public License ("GPL") version 2 as published by the Free 28 * Software Foundation. 29 * 30 * NO WARRANTY 31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 41 * POSSIBILITY OF SUCH DAMAGES. 42 */ 43 44 #include <acpi/acpi.h> 45 #include "accommon.h" 46 #include "acparser.h" 47 #include "amlcode.h" 48 #include "acdispat.h" 49 #include "acinterp.h" 50 #include "acnamesp.h" 51 52 #ifdef ACPI_ASL_COMPILER 53 #include <acpi/acdisasm.h> 54 #endif 55 56 #define _COMPONENT ACPI_DISPATCHER 57 ACPI_MODULE_NAME("dswload") 58 59 /******************************************************************************* 60 * 61 * FUNCTION: acpi_ds_init_callbacks 62 * 63 * PARAMETERS: walk_state - Current state of the parse tree walk 64 * pass_number - 1, 2, or 3 65 * 66 * RETURN: Status 67 * 68 * DESCRIPTION: Init walk state callbacks 69 * 70 ******************************************************************************/ 71 acpi_status 72 acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number) 73 { 74 75 switch (pass_number) { 76 case 1: 77 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | 78 ACPI_PARSE_DELETE_TREE; 79 walk_state->descending_callback = acpi_ds_load1_begin_op; 80 walk_state->ascending_callback = acpi_ds_load1_end_op; 81 break; 82 83 case 2: 84 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 | 85 ACPI_PARSE_DELETE_TREE; 86 walk_state->descending_callback = acpi_ds_load2_begin_op; 87 walk_state->ascending_callback = acpi_ds_load2_end_op; 88 break; 89 90 case 3: 91 #ifndef ACPI_NO_METHOD_EXECUTION 92 walk_state->parse_flags |= ACPI_PARSE_EXECUTE | 93 ACPI_PARSE_DELETE_TREE; 94 walk_state->descending_callback = acpi_ds_exec_begin_op; 95 walk_state->ascending_callback = acpi_ds_exec_end_op; 96 #endif 97 break; 98 99 default: 100 return (AE_BAD_PARAMETER); 101 } 102 103 return (AE_OK); 104 } 105 106 /******************************************************************************* 107 * 108 * FUNCTION: acpi_ds_load1_begin_op 109 * 110 * PARAMETERS: walk_state - Current state of the parse tree walk 111 * out_op - Where to return op if a new one is created 112 * 113 * RETURN: Status 114 * 115 * DESCRIPTION: Descending callback used during the loading of ACPI tables. 116 * 117 ******************************************************************************/ 118 119 acpi_status 120 acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state, 121 union acpi_parse_object ** out_op) 122 { 123 union acpi_parse_object *op; 124 struct acpi_namespace_node *node; 125 acpi_status status; 126 acpi_object_type object_type; 127 char *path; 128 u32 flags; 129 130 ACPI_FUNCTION_TRACE(ds_load1_begin_op); 131 132 op = walk_state->op; 133 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, 134 walk_state)); 135 136 /* We are only interested in opcodes that have an associated name */ 137 138 if (op) { 139 if (!(walk_state->op_info->flags & AML_NAMED)) { 140 *out_op = op; 141 return_ACPI_STATUS(AE_OK); 142 } 143 144 /* Check if this object has already been installed in the namespace */ 145 146 if (op->common.node) { 147 *out_op = op; 148 return_ACPI_STATUS(AE_OK); 149 } 150 } 151 152 path = acpi_ps_get_next_namestring(&walk_state->parser_state); 153 154 /* Map the raw opcode into an internal object type */ 155 156 object_type = walk_state->op_info->object_type; 157 158 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, 159 "State=%p Op=%p [%s]\n", walk_state, op, 160 acpi_ut_get_type_name(object_type))); 161 162 switch (walk_state->opcode) { 163 case AML_SCOPE_OP: 164 165 /* 166 * The target name of the Scope() operator must exist at this point so 167 * that we can actually open the scope to enter new names underneath it. 168 * Allow search-to-root for single namesegs. 169 */ 170 status = 171 acpi_ns_lookup(walk_state->scope_info, path, object_type, 172 ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, 173 walk_state, &(node)); 174 #ifdef ACPI_ASL_COMPILER 175 if (status == AE_NOT_FOUND) { 176 /* 177 * Table disassembly: 178 * Target of Scope() not found. Generate an External for it, and 179 * insert the name into the namespace. 180 */ 181 acpi_dm_add_to_external_list(path, ACPI_TYPE_DEVICE, 0); 182 status = 183 acpi_ns_lookup(walk_state->scope_info, path, 184 object_type, ACPI_IMODE_LOAD_PASS1, 185 ACPI_NS_SEARCH_PARENT, walk_state, 186 &node); 187 } 188 #endif 189 if (ACPI_FAILURE(status)) { 190 ACPI_ERROR_NAMESPACE(path, status); 191 return_ACPI_STATUS(status); 192 } 193 194 /* 195 * Check to make sure that the target is 196 * one of the opcodes that actually opens a scope 197 */ 198 switch (node->type) { 199 case ACPI_TYPE_ANY: 200 case ACPI_TYPE_LOCAL_SCOPE: /* Scope */ 201 case ACPI_TYPE_DEVICE: 202 case ACPI_TYPE_POWER: 203 case ACPI_TYPE_PROCESSOR: 204 case ACPI_TYPE_THERMAL: 205 206 /* These are acceptable types */ 207 break; 208 209 case ACPI_TYPE_INTEGER: 210 case ACPI_TYPE_STRING: 211 case ACPI_TYPE_BUFFER: 212 213 /* 214 * These types we will allow, but we will change the type. 215 * This enables some existing code of the form: 216 * 217 * Name (DEB, 0) 218 * Scope (DEB) { ... } 219 * 220 * Note: silently change the type here. On the second pass, 221 * we will report a warning 222 */ 223 ACPI_DEBUG_PRINT((ACPI_DB_INFO, 224 "Type override - [%4.4s] had invalid type (%s) " 225 "for Scope operator, changed to type ANY\n", 226 acpi_ut_get_node_name(node), 227 acpi_ut_get_type_name(node->type))); 228 229 node->type = ACPI_TYPE_ANY; 230 walk_state->scope_info->common.value = ACPI_TYPE_ANY; 231 break; 232 233 default: 234 235 /* All other types are an error */ 236 237 ACPI_ERROR((AE_INFO, 238 "Invalid type (%s) for target of " 239 "Scope operator [%4.4s] (Cannot override)", 240 acpi_ut_get_type_name(node->type), 241 acpi_ut_get_node_name(node))); 242 243 return_ACPI_STATUS(AE_AML_OPERAND_TYPE); 244 } 245 break; 246 247 default: 248 /* 249 * For all other named opcodes, we will enter the name into 250 * the namespace. 251 * 252 * Setup the search flags. 253 * Since we are entering a name into the namespace, we do not want to 254 * enable the search-to-root upsearch. 255 * 256 * There are only two conditions where it is acceptable that the name 257 * already exists: 258 * 1) the Scope() operator can reopen a scoping object that was 259 * previously defined (Scope, Method, Device, etc.) 260 * 2) Whenever we are parsing a deferred opcode (op_region, Buffer, 261 * buffer_field, or Package), the name of the object is already 262 * in the namespace. 263 */ 264 if (walk_state->deferred_node) { 265 266 /* This name is already in the namespace, get the node */ 267 268 node = walk_state->deferred_node; 269 status = AE_OK; 270 break; 271 } 272 273 /* 274 * If we are executing a method, do not create any namespace objects 275 * during the load phase, only during execution. 276 */ 277 if (walk_state->method_node) { 278 node = NULL; 279 status = AE_OK; 280 break; 281 } 282 283 flags = ACPI_NS_NO_UPSEARCH; 284 if ((walk_state->opcode != AML_SCOPE_OP) && 285 (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) { 286 flags |= ACPI_NS_ERROR_IF_FOUND; 287 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, 288 "[%s] Cannot already exist\n", 289 acpi_ut_get_type_name(object_type))); 290 } else { 291 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, 292 "[%s] Both Find or Create allowed\n", 293 acpi_ut_get_type_name(object_type))); 294 } 295 296 /* 297 * Enter the named type into the internal namespace. We enter the name 298 * as we go downward in the parse tree. Any necessary subobjects that 299 * involve arguments to the opcode must be created as we go back up the 300 * parse tree later. 301 */ 302 status = 303 acpi_ns_lookup(walk_state->scope_info, path, object_type, 304 ACPI_IMODE_LOAD_PASS1, flags, walk_state, 305 &node); 306 if (ACPI_FAILURE(status)) { 307 if (status == AE_ALREADY_EXISTS) { 308 309 /* The name already exists in this scope */ 310 311 if (node->flags & ANOBJ_IS_EXTERNAL) { 312 /* 313 * Allow one create on an object or segment that was 314 * previously declared External 315 */ 316 node->flags &= ~ANOBJ_IS_EXTERNAL; 317 node->type = (u8) object_type; 318 319 /* Just retyped a node, probably will need to open a scope */ 320 321 if (acpi_ns_opens_scope(object_type)) { 322 status = 323 acpi_ds_scope_stack_push 324 (node, object_type, 325 walk_state); 326 if (ACPI_FAILURE(status)) { 327 return_ACPI_STATUS 328 (status); 329 } 330 } 331 332 status = AE_OK; 333 } 334 } 335 336 if (ACPI_FAILURE(status)) { 337 ACPI_ERROR_NAMESPACE(path, status); 338 return_ACPI_STATUS(status); 339 } 340 } 341 break; 342 } 343 344 /* Common exit */ 345 346 if (!op) { 347 348 /* Create a new op */ 349 350 op = acpi_ps_alloc_op(walk_state->opcode); 351 if (!op) { 352 return_ACPI_STATUS(AE_NO_MEMORY); 353 } 354 } 355 356 /* Initialize the op */ 357 358 #if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY)) 359 op->named.path = ACPI_CAST_PTR(u8, path); 360 #endif 361 362 if (node) { 363 /* 364 * Put the Node in the "op" object that the parser uses, so we 365 * can get it again quickly when this scope is closed 366 */ 367 op->common.node = node; 368 op->named.name = node->name.integer; 369 } 370 371 acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state), 372 op); 373 *out_op = op; 374 return_ACPI_STATUS(status); 375 } 376 377 /******************************************************************************* 378 * 379 * FUNCTION: acpi_ds_load1_end_op 380 * 381 * PARAMETERS: walk_state - Current state of the parse tree walk 382 * 383 * RETURN: Status 384 * 385 * DESCRIPTION: Ascending callback used during the loading of the namespace, 386 * both control methods and everything else. 387 * 388 ******************************************************************************/ 389 390 acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state) 391 { 392 union acpi_parse_object *op; 393 acpi_object_type object_type; 394 acpi_status status = AE_OK; 395 396 ACPI_FUNCTION_TRACE(ds_load1_end_op); 397 398 op = walk_state->op; 399 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, 400 walk_state)); 401 402 /* We are only interested in opcodes that have an associated name */ 403 404 if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) { 405 return_ACPI_STATUS(AE_OK); 406 } 407 408 /* Get the object type to determine if we should pop the scope */ 409 410 object_type = walk_state->op_info->object_type; 411 412 #ifndef ACPI_NO_METHOD_EXECUTION 413 if (walk_state->op_info->flags & AML_FIELD) { 414 /* 415 * If we are executing a method, do not create any namespace objects 416 * during the load phase, only during execution. 417 */ 418 if (!walk_state->method_node) { 419 if (walk_state->opcode == AML_FIELD_OP || 420 walk_state->opcode == AML_BANK_FIELD_OP || 421 walk_state->opcode == AML_INDEX_FIELD_OP) { 422 status = 423 acpi_ds_init_field_objects(op, walk_state); 424 } 425 } 426 return_ACPI_STATUS(status); 427 } 428 429 /* 430 * If we are executing a method, do not create any namespace objects 431 * during the load phase, only during execution. 432 */ 433 if (!walk_state->method_node) { 434 if (op->common.aml_opcode == AML_REGION_OP) { 435 status = 436 acpi_ex_create_region(op->named.data, 437 op->named.length, 438 (acpi_adr_space_type) ((op-> 439 common. 440 value. 441 arg)-> 442 common. 443 value. 444 integer), 445 walk_state); 446 if (ACPI_FAILURE(status)) { 447 return_ACPI_STATUS(status); 448 } 449 } else if (op->common.aml_opcode == AML_DATA_REGION_OP) { 450 status = 451 acpi_ex_create_region(op->named.data, 452 op->named.length, 453 ACPI_ADR_SPACE_DATA_TABLE, 454 walk_state); 455 if (ACPI_FAILURE(status)) { 456 return_ACPI_STATUS(status); 457 } 458 } 459 } 460 #endif 461 462 if (op->common.aml_opcode == AML_NAME_OP) { 463 464 /* For Name opcode, get the object type from the argument */ 465 466 if (op->common.value.arg) { 467 object_type = (acpi_ps_get_opcode_info((op->common. 468 value.arg)-> 469 common. 470 aml_opcode))-> 471 object_type; 472 473 /* Set node type if we have a namespace node */ 474 475 if (op->common.node) { 476 op->common.node->type = (u8) object_type; 477 } 478 } 479 } 480 481 /* 482 * If we are executing a method, do not create any namespace objects 483 * during the load phase, only during execution. 484 */ 485 if (!walk_state->method_node) { 486 if (op->common.aml_opcode == AML_METHOD_OP) { 487 /* 488 * method_op pkg_length name_string method_flags term_list 489 * 490 * Note: We must create the method node/object pair as soon as we 491 * see the method declaration. This allows later pass1 parsing 492 * of invocations of the method (need to know the number of 493 * arguments.) 494 */ 495 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, 496 "LOADING-Method: State=%p Op=%p NamedObj=%p\n", 497 walk_state, op, op->named.node)); 498 499 if (!acpi_ns_get_attached_object(op->named.node)) { 500 walk_state->operands[0] = 501 ACPI_CAST_PTR(void, op->named.node); 502 walk_state->num_operands = 1; 503 504 status = 505 acpi_ds_create_operands(walk_state, 506 op->common.value. 507 arg); 508 if (ACPI_SUCCESS(status)) { 509 status = 510 acpi_ex_create_method(op->named. 511 data, 512 op->named. 513 length, 514 walk_state); 515 } 516 517 walk_state->operands[0] = NULL; 518 walk_state->num_operands = 0; 519 520 if (ACPI_FAILURE(status)) { 521 return_ACPI_STATUS(status); 522 } 523 } 524 } 525 } 526 527 /* Pop the scope stack (only if loading a table) */ 528 529 if (!walk_state->method_node && acpi_ns_opens_scope(object_type)) { 530 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, 531 "(%s): Popping scope for Op %p\n", 532 acpi_ut_get_type_name(object_type), op)); 533 534 status = acpi_ds_scope_stack_pop(walk_state); 535 } 536 537 return_ACPI_STATUS(status); 538 } 539