xref: /linux/drivers/accel/habanalabs/common/security.h (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 /* SPDX-License-Identifier: GPL-2.0
2  *
3  * Copyright 2016-2022 HabanaLabs, Ltd.
4  * All Rights Reserved.
5  *
6  */
7 
8 #ifndef SECURITY_H_
9 #define SECURITY_H_
10 
11 #include <linux/io-64-nonatomic-lo-hi.h>
12 
13 struct hl_device;
14 
15 /* special blocks */
16 #define HL_GLBL_ERR_ADDRESS_MASK	GENMASK(11, 0)
17 /* GLBL_ERR_ADDR register offset from the start of the block */
18 #define HL_GLBL_ERR_ADDR_OFFSET		0xF44
19 /* GLBL_ERR_CAUSE register offset from the start of the block */
20 #define HL_GLBL_ERR_CAUSE_OFFSET	0xF48
21 
22 /*
23  * struct hl_special_block_info - stores address details of a particular type of
24  * IP block which has a SPECIAL part.
25  *
26  * @block_type: block type as described in every ASIC's block_types enum.
27  * @base_addr: base address of the first block of particular type,
28  *             e.g., address of NIC0_UMR0_0 of 'NIC_UMR' block.
29  * @major: number of major blocks of particular type.
30  * @minor: number of minor blocks of particular type.
31  * @sub_minor: number of sub minor blocks of particular type.
32  * @major_offset: address gap between 2 consecutive major blocks of particular type,
33  *                e.g., offset between NIC0_UMR0_0 and NIC1_UMR0_0 is 0x80000.
34  * @minor_offset: address gap between 2 consecutive minor blocks of particular type,
35  *                e.g., offset between NIC0_UMR0_0 and NIC0_UMR1_0 is 0x20000.
36  * @sub_minor_offset: address gap between 2 consecutive sub_minor blocks of particular
37  *                    type, e.g., offset between NIC0_UMR0_0 and NIC0_UMR0_1 is 0x1000.
38  *
39  * e.g., in Gaudi2, NIC_UMR blocks can be interpreted as:
40  * NIC<major>_UMR<minor>_<sub_minor> where major=12, minor=2, sub_minor=15.
41  * In other words, for each of 12 major numbers (i.e 0 to 11) there are
42  * 2 blocks with different minor numbers (i.e. 0 to 1). Again, for each minor
43  * number there are 15 blocks with different sub_minor numbers (i.e. 0 to 14).
44  * So different blocks are NIC0_UMR0_0, NIC0_UMR0_1, ..., NIC0_UMR1_0, ....,
45  * NIC11_UMR1_14.
46  *
47  * Struct's formatted data is located in the SOL-based auto-generated protbits headers.
48  */
49 struct hl_special_block_info {
50 	int block_type;
51 	u32 base_addr;
52 	u32 major;
53 	u32 minor;
54 	u32 sub_minor;
55 	u32 major_offset;
56 	u32 minor_offset;
57 	u32 sub_minor_offset;
58 };
59 
60 /*
61  * struct hl_automated_pb_cfg - represents configurations of a particular type
62  * of IP block which has protection bits.
63  *
64  * @addr: address details as described in hl_automation_pb_addr struct.
65  * @prot_map: each bit corresponds to one among 32 protection configuration regs
66  *            (e.g., SPECIAL_GLBL_PRIV). '1' means 0xffffffff and '0' means 0x0
67  *            to be written into the corresponding protection configuration reg.
68  *            This bit is meaningful if same bit in data_map is 0, otherwise ignored.
69  * @data_map: each bit corresponds to one among 32 protection configuration regs
70  *            (e.g., SPECIAL_GLBL_PRIV). '1' means corresponding protection
71  *            configuration reg is to be written with a value in array pointed
72  *            by 'data', otherwise the value is decided by 'prot_map'.
73  * @data: pointer to data array which stores the config value(s) to be written
74  *            to corresponding protection configuration reg(s).
75  * @data_size: size of the data array.
76  *
77  * Each bit of 'data_map' and 'prot_map' fields corresponds to one among 32
78  * protection configuration registers e.g., SPECIAL GLBL PRIV regs (starting at
79  * offset 0xE80). '1' in 'data_map' means protection configuration to be done
80  * using configuration in data array. '0' in 'data_map" means protection
81  * configuration to be done as per the value of corresponding bit in 'prot_map'.
82  * '1' in 'prot_map' means the register to be programmed with 0xFFFFFFFF
83  * (all non-protected). '0' in 'prot_map' means the register to be programmed
84  * with 0x0 (all protected).
85  *
86  * e.g., prot_map = 0x00000001, data_map = 0xC0000000 , data = {0xff, 0x12}
87  * SPECIAL_GLBL_PRIV[0] = 0xFFFFFFFF
88  * SPECIAL_GLBL_PRIV[1..29] = 0x0
89  * SPECIAL_GLBL_PRIV[30] = 0xFF
90  * SPECIAL_GLBL_PRIV[31] = 0x12
91  */
92 struct hl_automated_pb_cfg {
93 	struct hl_special_block_info addr;
94 	u32 prot_map;
95 	u32 data_map;
96 	const u32 *data;
97 	u8 data_size;
98 };
99 
100 /* struct hl_special_blocks_cfg - holds special blocks cfg data.
101  *
102  * @priv_automated_pb_cfg: points to the main privileged PB array.
103  * @sec_automated_pb_cfg: points to the main secured PB array.
104  * @skip_blocks_cfg: holds arrays of block types & block ranges to be excluded.
105  * @priv_cfg_size: size of the main privileged PB array.
106  * @sec_cfg_size: size of the main secured PB array.
107  * @prot_lvl_priv: indication if it's a privileged/secured PB configurations.
108  */
109 struct hl_special_blocks_cfg {
110 	struct hl_automated_pb_cfg *priv_automated_pb_cfg;
111 	struct hl_automated_pb_cfg *sec_automated_pb_cfg;
112 	struct hl_skip_blocks_cfg *skip_blocks_cfg;
113 	u32 priv_cfg_size;
114 	u32 sec_cfg_size;
115 	u8 prot_lvl_priv;
116 };
117 
118 /* Automated security */
119 
120 /* struct hl_skip_blocks_cfg - holds arrays of block types & block ranges to be
121  * excluded from special blocks configurations.
122  *
123  * @block_types: an array of block types NOT to be configured.
124  * @block_types_len: len of an array of block types not to be configured.
125  * @block_ranges: an array of block ranges not to be configured.
126  * @block_ranges_len: len of an array of block ranges not to be configured.
127  * @skip_block_hook: hook that will be called before initializing special blocks.
128  */
129 struct hl_skip_blocks_cfg {
130 	int *block_types;
131 	size_t block_types_len;
132 	struct range *block_ranges;
133 	size_t block_ranges_len;
134 	bool (*skip_block_hook)(struct hl_device *hdev,
135 				struct hl_special_blocks_cfg *special_blocks_cfg,
136 				u32 blk_idx, u32 major, u32 minor, u32 sub_minor);
137 };
138 
139 /**
140  * struct iterate_special_ctx - HW module special block iterator
141  * @fn: function to apply to each HW module special block instance
142  * @data: optional internal data to the function iterator
143  */
144 struct iterate_special_ctx {
145 	/*
146 	 * callback for the HW module special block iterator
147 	 * @hdev: pointer to the habanalabs device structure
148 	 * @block_id: block (ASIC specific definition can be dcore/hdcore)
149 	 * @major: major block index within block_id
150 	 * @minor: minor block index within the major block
151 	 * @sub_minor: sub_minor block index within the minor block
152 	 * @data: function specific data
153 	 */
154 	int (*fn)(struct hl_device *hdev, u32 block_id, u32 major, u32 minor,
155 						u32 sub_minor, void *data);
156 	void *data;
157 };
158 
159 int hl_iterate_special_blocks(struct hl_device *hdev, struct iterate_special_ctx *ctx);
160 void hl_check_for_glbl_errors(struct hl_device *hdev);
161 
162 #endif /* SECURITY_H_ */
163