1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Support for OLPC XO-1 System Control Interrupts (SCI) 4 * 5 * Copyright (C) 2010 One Laptop per Child 6 * Copyright (C) 2006 Red Hat, Inc. 7 * Copyright (C) 2006 Advanced Micro Devices, Inc. 8 */ 9 10 #include <linux/cs5535.h> 11 #include <linux/device.h> 12 #include <linux/gpio/legacy.h> 13 #include <linux/input.h> 14 #include <linux/interrupt.h> 15 #include <linux/platform_device.h> 16 #include <linux/pm.h> 17 #include <linux/power_supply.h> 18 #include <linux/suspend.h> 19 #include <linux/workqueue.h> 20 #include <linux/olpc-ec.h> 21 22 #include <asm/io.h> 23 #include <asm/msr.h> 24 #include <asm/olpc.h> 25 26 #define DRV_NAME "olpc-xo1-sci" 27 #define PFX DRV_NAME ": " 28 29 static unsigned long acpi_base; 30 static struct input_dev *power_button_idev; 31 static struct input_dev *ebook_switch_idev; 32 static struct input_dev *lid_switch_idev; 33 34 static int sci_irq; 35 36 static bool lid_open; 37 static bool lid_inverted; 38 static int lid_wake_mode; 39 40 enum lid_wake_modes { 41 LID_WAKE_ALWAYS, 42 LID_WAKE_OPEN, 43 LID_WAKE_CLOSE, 44 }; 45 46 static const char * const lid_wake_mode_names[] = { 47 [LID_WAKE_ALWAYS] = "always", 48 [LID_WAKE_OPEN] = "open", 49 [LID_WAKE_CLOSE] = "close", 50 }; 51 52 static void battery_status_changed(void) 53 { 54 struct power_supply *psy = power_supply_get_by_name("olpc_battery"); 55 56 if (psy) { 57 power_supply_changed(psy); 58 power_supply_put(psy); 59 } 60 } 61 62 static void ac_status_changed(void) 63 { 64 struct power_supply *psy = power_supply_get_by_name("olpc_ac"); 65 66 if (psy) { 67 power_supply_changed(psy); 68 power_supply_put(psy); 69 } 70 } 71 72 /* Report current ebook switch state through input layer */ 73 static void send_ebook_state(void) 74 { 75 unsigned char state; 76 77 if (olpc_ec_cmd(EC_READ_EB_MODE, NULL, 0, &state, 1)) { 78 pr_err(PFX "failed to get ebook state\n"); 79 return; 80 } 81 82 if (test_bit(SW_TABLET_MODE, ebook_switch_idev->sw) == !!state) 83 return; /* Nothing new to report. */ 84 85 input_report_switch(ebook_switch_idev, SW_TABLET_MODE, state); 86 input_sync(ebook_switch_idev); 87 pm_wakeup_event(&ebook_switch_idev->dev, 0); 88 } 89 90 static void flip_lid_inverter(void) 91 { 92 /* gpio is high; invert so we'll get l->h event interrupt */ 93 if (lid_inverted) 94 cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_INPUT_INVERT); 95 else 96 cs5535_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_INVERT); 97 lid_inverted = !lid_inverted; 98 } 99 100 static void detect_lid_state(void) 101 { 102 /* 103 * the edge detector hookup on the gpio inputs on the geode is 104 * odd, to say the least. See http://dev.laptop.org/ticket/5703 105 * for details, but in a nutshell: we don't use the edge 106 * detectors. instead, we make use of an anomaly: with the both 107 * edge detectors turned off, we still get an edge event on a 108 * positive edge transition. to take advantage of this, we use the 109 * front-end inverter to ensure that that's the edge we're always 110 * going to see next. 111 */ 112 113 int state; 114 115 state = cs5535_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK); 116 lid_open = !state ^ !lid_inverted; /* x ^^ y */ 117 if (!state) 118 return; 119 120 flip_lid_inverter(); 121 } 122 123 /* Report current lid switch state through input layer */ 124 static void send_lid_state(void) 125 { 126 if (!!test_bit(SW_LID, lid_switch_idev->sw) == !lid_open) 127 return; /* Nothing new to report. */ 128 129 input_report_switch(lid_switch_idev, SW_LID, !lid_open); 130 input_sync(lid_switch_idev); 131 pm_wakeup_event(&lid_switch_idev->dev, 0); 132 } 133 134 static ssize_t lid_wake_mode_show(struct device *dev, 135 struct device_attribute *attr, char *buf) 136 { 137 const char *mode = lid_wake_mode_names[lid_wake_mode]; 138 return sprintf(buf, "%s\n", mode); 139 } 140 static ssize_t lid_wake_mode_set(struct device *dev, 141 struct device_attribute *attr, 142 const char *buf, size_t count) 143 { 144 int i; 145 for (i = 0; i < ARRAY_SIZE(lid_wake_mode_names); i++) { 146 const char *mode = lid_wake_mode_names[i]; 147 if (strlen(mode) != count || strncasecmp(mode, buf, count)) 148 continue; 149 150 lid_wake_mode = i; 151 return count; 152 } 153 return -EINVAL; 154 } 155 static DEVICE_ATTR(lid_wake_mode, S_IWUSR | S_IRUGO, lid_wake_mode_show, 156 lid_wake_mode_set); 157 158 static struct attribute *lid_attrs[] = { 159 &dev_attr_lid_wake_mode.attr, 160 NULL, 161 }; 162 ATTRIBUTE_GROUPS(lid); 163 164 /* 165 * Process all items in the EC's SCI queue. 166 * 167 * This is handled in a workqueue because olpc_ec_cmd can be slow (and 168 * can even timeout). 169 * 170 * If propagate_events is false, the queue is drained without events being 171 * generated for the interrupts. 172 */ 173 static void process_sci_queue(bool propagate_events) 174 { 175 int r; 176 u16 data; 177 178 do { 179 r = olpc_ec_sci_query(&data); 180 if (r || !data) 181 break; 182 183 pr_debug(PFX "SCI 0x%x received\n", data); 184 185 switch (data) { 186 case EC_SCI_SRC_BATERR: 187 case EC_SCI_SRC_BATSOC: 188 case EC_SCI_SRC_BATTERY: 189 case EC_SCI_SRC_BATCRIT: 190 battery_status_changed(); 191 break; 192 case EC_SCI_SRC_ACPWR: 193 ac_status_changed(); 194 break; 195 } 196 197 if (data == EC_SCI_SRC_EBOOK && propagate_events) 198 send_ebook_state(); 199 } while (data); 200 201 if (r) 202 pr_err(PFX "Failed to clear SCI queue"); 203 } 204 205 static void process_sci_queue_work(struct work_struct *work) 206 { 207 process_sci_queue(true); 208 } 209 210 static DECLARE_WORK(sci_work, process_sci_queue_work); 211 212 static irqreturn_t xo1_sci_intr(int irq, void *dev_id) 213 { 214 struct platform_device *pdev = dev_id; 215 u32 sts; 216 u32 gpe; 217 218 sts = inl(acpi_base + CS5536_PM1_STS); 219 outl(sts | 0xffff, acpi_base + CS5536_PM1_STS); 220 221 gpe = inl(acpi_base + CS5536_PM_GPE0_STS); 222 outl(0xffffffff, acpi_base + CS5536_PM_GPE0_STS); 223 224 dev_dbg(&pdev->dev, "sts %x gpe %x\n", sts, gpe); 225 226 if (sts & CS5536_PWRBTN_FLAG) { 227 if (!(sts & CS5536_WAK_FLAG)) { 228 /* Only report power button input when it was pressed 229 * during regular operation (as opposed to when it 230 * was used to wake the system). */ 231 input_report_key(power_button_idev, KEY_POWER, 1); 232 input_sync(power_button_idev); 233 input_report_key(power_button_idev, KEY_POWER, 0); 234 input_sync(power_button_idev); 235 } 236 /* Report the wakeup event in all cases. */ 237 pm_wakeup_event(&power_button_idev->dev, 0); 238 } 239 240 if ((sts & (CS5536_RTC_FLAG | CS5536_WAK_FLAG)) == 241 (CS5536_RTC_FLAG | CS5536_WAK_FLAG)) { 242 /* When the system is woken by the RTC alarm, report the 243 * event on the rtc device. */ 244 struct device *rtc = bus_find_device_by_name( 245 &platform_bus_type, NULL, "rtc_cmos"); 246 if (rtc) { 247 pm_wakeup_event(rtc, 0); 248 put_device(rtc); 249 } 250 } 251 252 if (gpe & CS5536_GPIOM7_PME_FLAG) { /* EC GPIO */ 253 cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); 254 schedule_work(&sci_work); 255 } 256 257 cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); 258 cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); 259 detect_lid_state(); 260 send_lid_state(); 261 262 return IRQ_HANDLED; 263 } 264 265 static int xo1_sci_suspend(struct platform_device *pdev, pm_message_t state) 266 { 267 if (device_may_wakeup(&power_button_idev->dev)) 268 olpc_xo1_pm_wakeup_set(CS5536_PM_PWRBTN); 269 else 270 olpc_xo1_pm_wakeup_clear(CS5536_PM_PWRBTN); 271 272 if (device_may_wakeup(&ebook_switch_idev->dev)) 273 olpc_ec_wakeup_set(EC_SCI_SRC_EBOOK); 274 else 275 olpc_ec_wakeup_clear(EC_SCI_SRC_EBOOK); 276 277 if (!device_may_wakeup(&lid_switch_idev->dev)) { 278 cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); 279 } else if ((lid_open && lid_wake_mode == LID_WAKE_OPEN) || 280 (!lid_open && lid_wake_mode == LID_WAKE_CLOSE)) { 281 flip_lid_inverter(); 282 283 /* we may have just caused an event */ 284 cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); 285 cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); 286 287 cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); 288 } 289 290 return 0; 291 } 292 293 static int xo1_sci_resume(struct platform_device *pdev) 294 { 295 /* 296 * We don't know what may have happened while we were asleep. 297 * Reestablish our lid setup so we're sure to catch all transitions. 298 */ 299 detect_lid_state(); 300 send_lid_state(); 301 cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); 302 303 /* Enable all EC events */ 304 olpc_ec_mask_write(EC_SCI_SRC_ALL); 305 306 /* Power/battery status might have changed too */ 307 battery_status_changed(); 308 ac_status_changed(); 309 return 0; 310 } 311 312 static int setup_sci_interrupt(struct platform_device *pdev) 313 { 314 u64 msr; 315 u32 lo; 316 u32 sts; 317 int r; 318 319 rdmsrq(0x51400020, msr); 320 sci_irq = (msr >> 20) & 15; 321 322 if (sci_irq) { 323 dev_info(&pdev->dev, "SCI is mapped to IRQ %d\n", sci_irq); 324 } else { 325 /* Zero means masked */ 326 dev_info(&pdev->dev, "SCI unmapped. Mapping to IRQ 3\n"); 327 sci_irq = 3; 328 msr |= 0x00300000; 329 wrmsrq(0x51400020, msr); 330 } 331 332 /* Select level triggered in PIC */ 333 if (sci_irq < 8) { 334 lo = inb(CS5536_PIC_INT_SEL1); 335 lo |= 1 << sci_irq; 336 outb(lo, CS5536_PIC_INT_SEL1); 337 } else { 338 lo = inb(CS5536_PIC_INT_SEL2); 339 lo |= 1 << (sci_irq - 8); 340 outb(lo, CS5536_PIC_INT_SEL2); 341 } 342 343 /* Enable interesting SCI events, and clear pending interrupts */ 344 sts = inl(acpi_base + CS5536_PM1_STS); 345 outl(((CS5536_PM_PWRBTN | CS5536_PM_RTC) << 16) | 0xffff, 346 acpi_base + CS5536_PM1_STS); 347 348 r = request_irq(sci_irq, xo1_sci_intr, 0, DRV_NAME, pdev); 349 if (r) 350 dev_err(&pdev->dev, "can't request interrupt\n"); 351 352 return r; 353 } 354 355 static int setup_ec_sci(void) 356 { 357 int r; 358 359 r = gpio_request(OLPC_GPIO_ECSCI, "OLPC-ECSCI"); 360 if (r) 361 return r; 362 363 gpio_direction_input(OLPC_GPIO_ECSCI); 364 365 /* Clear pending EC SCI events */ 366 cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_NEGATIVE_EDGE_STS); 367 cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_POSITIVE_EDGE_STS); 368 369 /* 370 * Enable EC SCI events, and map them to both a PME and the SCI 371 * interrupt. 372 * 373 * Ordinarily, in addition to functioning as GPIOs, Geode GPIOs can 374 * be mapped to regular interrupts *or* Geode-specific Power 375 * Management Events (PMEs) - events that bring the system out of 376 * suspend. In this case, we want both of those things - the system 377 * wakeup, *and* the ability to get an interrupt when an event occurs. 378 * 379 * To achieve this, we map the GPIO to a PME, and then we use one 380 * of the many generic knobs on the CS5535 PIC to additionally map the 381 * PME to the regular SCI interrupt line. 382 */ 383 cs5535_gpio_set(OLPC_GPIO_ECSCI, GPIO_EVENTS_ENABLE); 384 385 /* Set the SCI to cause a PME event on group 7 */ 386 cs5535_gpio_setup_event(OLPC_GPIO_ECSCI, 7, 1); 387 388 /* And have group 7 also fire the SCI interrupt */ 389 cs5535_pic_unreqz_select_high(7, sci_irq); 390 391 return 0; 392 } 393 394 static void free_ec_sci(void) 395 { 396 gpio_free(OLPC_GPIO_ECSCI); 397 } 398 399 static int setup_lid_events(void) 400 { 401 int r; 402 403 r = gpio_request(OLPC_GPIO_LID, "OLPC-LID"); 404 if (r) 405 return r; 406 407 gpio_direction_input(OLPC_GPIO_LID); 408 409 cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_INPUT_INVERT); 410 lid_inverted = 0; 411 412 /* Clear edge detection and event enable for now */ 413 cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); 414 cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); 415 cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); 416 cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); 417 cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); 418 419 /* Set the LID to cause an PME event on group 6 */ 420 cs5535_gpio_setup_event(OLPC_GPIO_LID, 6, 1); 421 422 /* Set PME group 6 to fire the SCI interrupt */ 423 cs5535_gpio_set_irq(6, sci_irq); 424 425 /* Enable the event */ 426 cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); 427 428 return 0; 429 } 430 431 static void free_lid_events(void) 432 { 433 gpio_free(OLPC_GPIO_LID); 434 } 435 436 static int setup_power_button(struct platform_device *pdev) 437 { 438 int r; 439 440 power_button_idev = input_allocate_device(); 441 if (!power_button_idev) 442 return -ENOMEM; 443 444 power_button_idev->name = "Power Button"; 445 power_button_idev->phys = DRV_NAME "/input0"; 446 set_bit(EV_KEY, power_button_idev->evbit); 447 set_bit(KEY_POWER, power_button_idev->keybit); 448 449 power_button_idev->dev.parent = &pdev->dev; 450 device_init_wakeup(&power_button_idev->dev, 1); 451 452 r = input_register_device(power_button_idev); 453 if (r) { 454 dev_err(&pdev->dev, "failed to register power button: %d\n", r); 455 input_free_device(power_button_idev); 456 } 457 458 return r; 459 } 460 461 static void free_power_button(void) 462 { 463 input_unregister_device(power_button_idev); 464 } 465 466 static int setup_ebook_switch(struct platform_device *pdev) 467 { 468 int r; 469 470 ebook_switch_idev = input_allocate_device(); 471 if (!ebook_switch_idev) 472 return -ENOMEM; 473 474 ebook_switch_idev->name = "EBook Switch"; 475 ebook_switch_idev->phys = DRV_NAME "/input1"; 476 set_bit(EV_SW, ebook_switch_idev->evbit); 477 set_bit(SW_TABLET_MODE, ebook_switch_idev->swbit); 478 479 ebook_switch_idev->dev.parent = &pdev->dev; 480 device_set_wakeup_capable(&ebook_switch_idev->dev, true); 481 482 r = input_register_device(ebook_switch_idev); 483 if (r) { 484 dev_err(&pdev->dev, "failed to register ebook switch: %d\n", r); 485 input_free_device(ebook_switch_idev); 486 } 487 488 return r; 489 } 490 491 static void free_ebook_switch(void) 492 { 493 input_unregister_device(ebook_switch_idev); 494 } 495 496 static int setup_lid_switch(struct platform_device *pdev) 497 { 498 int r; 499 500 lid_switch_idev = input_allocate_device(); 501 if (!lid_switch_idev) 502 return -ENOMEM; 503 504 lid_switch_idev->name = "Lid Switch"; 505 lid_switch_idev->phys = DRV_NAME "/input2"; 506 set_bit(EV_SW, lid_switch_idev->evbit); 507 set_bit(SW_LID, lid_switch_idev->swbit); 508 509 lid_switch_idev->dev.parent = &pdev->dev; 510 device_set_wakeup_capable(&lid_switch_idev->dev, true); 511 512 r = input_register_device(lid_switch_idev); 513 if (r) { 514 dev_err(&pdev->dev, "failed to register lid switch: %d\n", r); 515 goto err_register; 516 } 517 518 return 0; 519 520 err_register: 521 input_free_device(lid_switch_idev); 522 return r; 523 } 524 525 static void free_lid_switch(void) 526 { 527 input_unregister_device(lid_switch_idev); 528 } 529 530 static int xo1_sci_probe(struct platform_device *pdev) 531 { 532 struct resource *res; 533 int r; 534 535 /* don't run on non-XOs */ 536 if (!machine_is_olpc()) 537 return -ENODEV; 538 539 res = platform_get_resource(pdev, IORESOURCE_IO, 0); 540 if (!res) { 541 dev_err(&pdev->dev, "can't fetch device resource info\n"); 542 return -EIO; 543 } 544 acpi_base = res->start; 545 546 r = setup_power_button(pdev); 547 if (r) 548 return r; 549 550 r = setup_ebook_switch(pdev); 551 if (r) 552 goto err_ebook; 553 554 r = setup_lid_switch(pdev); 555 if (r) 556 goto err_lid; 557 558 r = setup_lid_events(); 559 if (r) 560 goto err_lidevt; 561 562 r = setup_ec_sci(); 563 if (r) 564 goto err_ecsci; 565 566 /* Enable PME generation for EC-generated events */ 567 outl(CS5536_GPIOM6_PME_EN | CS5536_GPIOM7_PME_EN, 568 acpi_base + CS5536_PM_GPE0_EN); 569 570 /* Clear pending events */ 571 outl(0xffffffff, acpi_base + CS5536_PM_GPE0_STS); 572 process_sci_queue(false); 573 574 /* Initial sync */ 575 send_ebook_state(); 576 detect_lid_state(); 577 send_lid_state(); 578 579 r = setup_sci_interrupt(pdev); 580 if (r) 581 goto err_sci; 582 583 /* Enable all EC events */ 584 olpc_ec_mask_write(EC_SCI_SRC_ALL); 585 586 return r; 587 588 err_sci: 589 free_ec_sci(); 590 err_ecsci: 591 free_lid_events(); 592 err_lidevt: 593 free_lid_switch(); 594 err_lid: 595 free_ebook_switch(); 596 err_ebook: 597 free_power_button(); 598 return r; 599 } 600 601 static void xo1_sci_remove(struct platform_device *pdev) 602 { 603 free_irq(sci_irq, pdev); 604 cancel_work_sync(&sci_work); 605 free_ec_sci(); 606 free_lid_events(); 607 free_lid_switch(); 608 free_ebook_switch(); 609 free_power_button(); 610 acpi_base = 0; 611 } 612 613 static struct platform_driver xo1_sci_driver = { 614 .driver = { 615 .name = "olpc-xo1-sci-acpi", 616 .dev_groups = lid_groups, 617 }, 618 .probe = xo1_sci_probe, 619 .remove = xo1_sci_remove, 620 .suspend = xo1_sci_suspend, 621 .resume = xo1_sci_resume, 622 }; 623 624 static int __init xo1_sci_init(void) 625 { 626 return platform_driver_register(&xo1_sci_driver); 627 } 628 arch_initcall(xo1_sci_init); 629