1 /* 2 * Low-Level PCI Support for PC -- Routing of Interrupts 3 * 4 * (c) 1999--2000 Martin Mares <mj@ucw.cz> 5 */ 6 7 #include <linux/types.h> 8 #include <linux/kernel.h> 9 #include <linux/pci.h> 10 #include <linux/init.h> 11 #include <linux/interrupt.h> 12 #include <linux/dmi.h> 13 #include <linux/io.h> 14 #include <linux/smp.h> 15 #include <asm/io_apic.h> 16 #include <linux/irq.h> 17 #include <linux/acpi.h> 18 #include <asm/pci_x86.h> 19 20 #define PIRQ_SIGNATURE (('$' << 0) + ('P' << 8) + ('I' << 16) + ('R' << 24)) 21 #define PIRQ_VERSION 0x0100 22 23 static int broken_hp_bios_irq9; 24 static int acer_tm360_irqrouting; 25 26 static struct irq_routing_table *pirq_table; 27 28 static int pirq_enable_irq(struct pci_dev *dev); 29 30 /* 31 * Never use: 0, 1, 2 (timer, keyboard, and cascade) 32 * Avoid using: 13, 14 and 15 (FP error and IDE). 33 * Penalize: 3, 4, 6, 7, 12 (known ISA uses: serial, floppy, parallel and mouse) 34 */ 35 unsigned int pcibios_irq_mask = 0xfff8; 36 37 static int pirq_penalty[16] = { 38 1000000, 1000000, 1000000, 1000, 1000, 0, 1000, 1000, 39 0, 0, 0, 0, 1000, 100000, 100000, 100000 40 }; 41 42 struct irq_router { 43 char *name; 44 u16 vendor, device; 45 int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq); 46 int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, 47 int new); 48 }; 49 50 struct irq_router_handler { 51 u16 vendor; 52 int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device); 53 }; 54 55 int (*pcibios_enable_irq)(struct pci_dev *dev) = pirq_enable_irq; 56 void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL; 57 58 /* 59 * Check passed address for the PCI IRQ Routing Table signature 60 * and perform checksum verification. 61 */ 62 63 static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr) 64 { 65 struct irq_routing_table *rt; 66 int i; 67 u8 sum; 68 69 rt = (struct irq_routing_table *) addr; 70 if (rt->signature != PIRQ_SIGNATURE || 71 rt->version != PIRQ_VERSION || 72 rt->size % 16 || 73 rt->size < sizeof(struct irq_routing_table)) 74 return NULL; 75 sum = 0; 76 for (i = 0; i < rt->size; i++) 77 sum += addr[i]; 78 if (!sum) { 79 DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", 80 rt); 81 return rt; 82 } 83 return NULL; 84 } 85 86 87 88 /* 89 * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table. 90 */ 91 92 static struct irq_routing_table * __init pirq_find_routing_table(void) 93 { 94 u8 *addr; 95 struct irq_routing_table *rt; 96 97 if (pirq_table_addr) { 98 rt = pirq_check_routing_table((u8 *) __va(pirq_table_addr)); 99 if (rt) 100 return rt; 101 printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n"); 102 } 103 for (addr = (u8 *) __va(0xf0000); addr < (u8 *) __va(0x100000); addr += 16) { 104 rt = pirq_check_routing_table(addr); 105 if (rt) 106 return rt; 107 } 108 return NULL; 109 } 110 111 /* 112 * If we have a IRQ routing table, use it to search for peer host 113 * bridges. It's a gross hack, but since there are no other known 114 * ways how to get a list of buses, we have to go this way. 115 */ 116 117 static void __init pirq_peer_trick(void) 118 { 119 struct irq_routing_table *rt = pirq_table; 120 u8 busmap[256]; 121 int i; 122 struct irq_info *e; 123 124 memset(busmap, 0, sizeof(busmap)); 125 for (i = 0; i < (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info); i++) { 126 e = &rt->slots[i]; 127 #ifdef DEBUG 128 { 129 int j; 130 DBG(KERN_DEBUG "%02x:%02x slot=%02x", e->bus, e->devfn/8, e->slot); 131 for (j = 0; j < 4; j++) 132 DBG(" %d:%02x/%04x", j, e->irq[j].link, e->irq[j].bitmap); 133 DBG("\n"); 134 } 135 #endif 136 busmap[e->bus] = 1; 137 } 138 for (i = 1; i < 256; i++) { 139 int node; 140 if (!busmap[i] || pci_find_bus(0, i)) 141 continue; 142 node = get_mp_bus_to_node(i); 143 if (pci_scan_bus_on_node(i, &pci_root_ops, node)) 144 printk(KERN_INFO "PCI: Discovered primary peer " 145 "bus %02x [IRQ]\n", i); 146 } 147 pcibios_last_bus = -1; 148 } 149 150 /* 151 * Code for querying and setting of IRQ routes on various interrupt routers. 152 */ 153 154 void eisa_set_level_irq(unsigned int irq) 155 { 156 unsigned char mask = 1 << (irq & 7); 157 unsigned int port = 0x4d0 + (irq >> 3); 158 unsigned char val; 159 static u16 eisa_irq_mask; 160 161 if (irq >= 16 || (1 << irq) & eisa_irq_mask) 162 return; 163 164 eisa_irq_mask |= (1 << irq); 165 printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq); 166 val = inb(port); 167 if (!(val & mask)) { 168 DBG(KERN_DEBUG " -> edge"); 169 outb(val | mask, port); 170 } 171 } 172 173 /* 174 * Common IRQ routing practice: nibbles in config space, 175 * offset by some magic constant. 176 */ 177 static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr) 178 { 179 u8 x; 180 unsigned reg = offset + (nr >> 1); 181 182 pci_read_config_byte(router, reg, &x); 183 return (nr & 1) ? (x >> 4) : (x & 0xf); 184 } 185 186 static void write_config_nybble(struct pci_dev *router, unsigned offset, 187 unsigned nr, unsigned int val) 188 { 189 u8 x; 190 unsigned reg = offset + (nr >> 1); 191 192 pci_read_config_byte(router, reg, &x); 193 x = (nr & 1) ? ((x & 0x0f) | (val << 4)) : ((x & 0xf0) | val); 194 pci_write_config_byte(router, reg, x); 195 } 196 197 /* 198 * ALI pirq entries are damn ugly, and completely undocumented. 199 * This has been figured out from pirq tables, and it's not a pretty 200 * picture. 201 */ 202 static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 203 { 204 static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 }; 205 206 WARN_ON_ONCE(pirq > 16); 207 return irqmap[read_config_nybble(router, 0x48, pirq-1)]; 208 } 209 210 static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 211 { 212 static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 }; 213 unsigned int val = irqmap[irq]; 214 215 WARN_ON_ONCE(pirq > 16); 216 if (val) { 217 write_config_nybble(router, 0x48, pirq-1, val); 218 return 1; 219 } 220 return 0; 221 } 222 223 /* 224 * The Intel PIIX4 pirq rules are fairly simple: "pirq" is 225 * just a pointer to the config space. 226 */ 227 static int pirq_piix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 228 { 229 u8 x; 230 231 pci_read_config_byte(router, pirq, &x); 232 return (x < 16) ? x : 0; 233 } 234 235 static int pirq_piix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 236 { 237 pci_write_config_byte(router, pirq, irq); 238 return 1; 239 } 240 241 /* 242 * The VIA pirq rules are nibble-based, like ALI, 243 * but without the ugly irq number munging. 244 * However, PIRQD is in the upper instead of lower 4 bits. 245 */ 246 static int pirq_via_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 247 { 248 return read_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq); 249 } 250 251 static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 252 { 253 write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq); 254 return 1; 255 } 256 257 /* 258 * The VIA pirq rules are nibble-based, like ALI, 259 * but without the ugly irq number munging. 260 * However, for 82C586, nibble map is different . 261 */ 262 static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 263 { 264 static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; 265 266 WARN_ON_ONCE(pirq > 5); 267 return read_config_nybble(router, 0x55, pirqmap[pirq-1]); 268 } 269 270 static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 271 { 272 static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; 273 274 WARN_ON_ONCE(pirq > 5); 275 write_config_nybble(router, 0x55, pirqmap[pirq-1], irq); 276 return 1; 277 } 278 279 /* 280 * ITE 8330G pirq rules are nibble-based 281 * FIXME: pirqmap may be { 1, 0, 3, 2 }, 282 * 2+3 are both mapped to irq 9 on my system 283 */ 284 static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 285 { 286 static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; 287 288 WARN_ON_ONCE(pirq > 4); 289 return read_config_nybble(router, 0x43, pirqmap[pirq-1]); 290 } 291 292 static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 293 { 294 static const unsigned char pirqmap[4] = { 1, 0, 2, 3 }; 295 296 WARN_ON_ONCE(pirq > 4); 297 write_config_nybble(router, 0x43, pirqmap[pirq-1], irq); 298 return 1; 299 } 300 301 /* 302 * OPTI: high four bits are nibble pointer.. 303 * I wonder what the low bits do? 304 */ 305 static int pirq_opti_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 306 { 307 return read_config_nybble(router, 0xb8, pirq >> 4); 308 } 309 310 static int pirq_opti_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 311 { 312 write_config_nybble(router, 0xb8, pirq >> 4, irq); 313 return 1; 314 } 315 316 /* 317 * Cyrix: nibble offset 0x5C 318 * 0x5C bits 7:4 is INTB bits 3:0 is INTA 319 * 0x5D bits 7:4 is INTD bits 3:0 is INTC 320 */ 321 static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 322 { 323 return read_config_nybble(router, 0x5C, (pirq-1)^1); 324 } 325 326 static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 327 { 328 write_config_nybble(router, 0x5C, (pirq-1)^1, irq); 329 return 1; 330 } 331 332 /* 333 * PIRQ routing for SiS 85C503 router used in several SiS chipsets. 334 * We have to deal with the following issues here: 335 * - vendors have different ideas about the meaning of link values 336 * - some onboard devices (integrated in the chipset) have special 337 * links and are thus routed differently (i.e. not via PCI INTA-INTD) 338 * - different revision of the router have a different layout for 339 * the routing registers, particularly for the onchip devices 340 * 341 * For all routing registers the common thing is we have one byte 342 * per routeable link which is defined as: 343 * bit 7 IRQ mapping enabled (0) or disabled (1) 344 * bits [6:4] reserved (sometimes used for onchip devices) 345 * bits [3:0] IRQ to map to 346 * allowed: 3-7, 9-12, 14-15 347 * reserved: 0, 1, 2, 8, 13 348 * 349 * The config-space registers located at 0x41/0x42/0x43/0x44 are 350 * always used to route the normal PCI INT A/B/C/D respectively. 351 * Apparently there are systems implementing PCI routing table using 352 * link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D. 353 * We try our best to handle both link mappings. 354 * 355 * Currently (2003-05-21) it appears most SiS chipsets follow the 356 * definition of routing registers from the SiS-5595 southbridge. 357 * According to the SiS 5595 datasheets the revision id's of the 358 * router (ISA-bridge) should be 0x01 or 0xb0. 359 * 360 * Furthermore we've also seen lspci dumps with revision 0x00 and 0xb1. 361 * Looks like these are used in a number of SiS 5xx/6xx/7xx chipsets. 362 * They seem to work with the current routing code. However there is 363 * some concern because of the two USB-OHCI HCs (original SiS 5595 364 * had only one). YMMV. 365 * 366 * Onchip routing for router rev-id 0x01/0xb0 and probably 0x00/0xb1: 367 * 368 * 0x61: IDEIRQ: 369 * bits [6:5] must be written 01 370 * bit 4 channel-select primary (0), secondary (1) 371 * 372 * 0x62: USBIRQ: 373 * bit 6 OHCI function disabled (0), enabled (1) 374 * 375 * 0x6a: ACPI/SCI IRQ: bits 4-6 reserved 376 * 377 * 0x7e: Data Acq. Module IRQ - bits 4-6 reserved 378 * 379 * We support USBIRQ (in addition to INTA-INTD) and keep the 380 * IDE, ACPI and DAQ routing untouched as set by the BIOS. 381 * 382 * Currently the only reported exception is the new SiS 65x chipset 383 * which includes the SiS 69x southbridge. Here we have the 85C503 384 * router revision 0x04 and there are changes in the register layout 385 * mostly related to the different USB HCs with USB 2.0 support. 386 * 387 * Onchip routing for router rev-id 0x04 (try-and-error observation) 388 * 389 * 0x60/0x61/0x62/0x63: 1xEHCI and 3xOHCI (companion) USB-HCs 390 * bit 6-4 are probably unused, not like 5595 391 */ 392 393 #define PIRQ_SIS_IRQ_MASK 0x0f 394 #define PIRQ_SIS_IRQ_DISABLE 0x80 395 #define PIRQ_SIS_USB_ENABLE 0x40 396 397 static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 398 { 399 u8 x; 400 int reg; 401 402 reg = pirq; 403 if (reg >= 0x01 && reg <= 0x04) 404 reg += 0x40; 405 pci_read_config_byte(router, reg, &x); 406 return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK); 407 } 408 409 static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 410 { 411 u8 x; 412 int reg; 413 414 reg = pirq; 415 if (reg >= 0x01 && reg <= 0x04) 416 reg += 0x40; 417 pci_read_config_byte(router, reg, &x); 418 x &= ~(PIRQ_SIS_IRQ_MASK | PIRQ_SIS_IRQ_DISABLE); 419 x |= irq ? irq: PIRQ_SIS_IRQ_DISABLE; 420 pci_write_config_byte(router, reg, x); 421 return 1; 422 } 423 424 425 /* 426 * VLSI: nibble offset 0x74 - educated guess due to routing table and 427 * config space of VLSI 82C534 PCI-bridge/router (1004:0102) 428 * Tested on HP OmniBook 800 covering PIRQ 1, 2, 4, 8 for onboard 429 * devices, PIRQ 3 for non-pci(!) soundchip and (untested) PIRQ 6 430 * for the busbridge to the docking station. 431 */ 432 433 static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 434 { 435 WARN_ON_ONCE(pirq >= 9); 436 if (pirq > 8) { 437 dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq); 438 return 0; 439 } 440 return read_config_nybble(router, 0x74, pirq-1); 441 } 442 443 static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 444 { 445 WARN_ON_ONCE(pirq >= 9); 446 if (pirq > 8) { 447 dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq); 448 return 0; 449 } 450 write_config_nybble(router, 0x74, pirq-1, irq); 451 return 1; 452 } 453 454 /* 455 * ServerWorks: PCI interrupts mapped to system IRQ lines through Index 456 * and Redirect I/O registers (0x0c00 and 0x0c01). The Index register 457 * format is (PCIIRQ## | 0x10), e.g.: PCIIRQ10=0x1a. The Redirect 458 * register is a straight binary coding of desired PIC IRQ (low nibble). 459 * 460 * The 'link' value in the PIRQ table is already in the correct format 461 * for the Index register. There are some special index values: 462 * 0x00 for ACPI (SCI), 0x01 for USB, 0x02 for IDE0, 0x04 for IDE1, 463 * and 0x03 for SMBus. 464 */ 465 static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 466 { 467 outb(pirq, 0xc00); 468 return inb(0xc01) & 0xf; 469 } 470 471 static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, 472 int pirq, int irq) 473 { 474 outb(pirq, 0xc00); 475 outb(irq, 0xc01); 476 return 1; 477 } 478 479 /* Support for AMD756 PCI IRQ Routing 480 * Jhon H. Caicedo <jhcaiced@osso.org.co> 481 * Jun/21/2001 0.2.0 Release, fixed to use "nybble" functions... (jhcaiced) 482 * Jun/19/2001 Alpha Release 0.1.0 (jhcaiced) 483 * The AMD756 pirq rules are nibble-based 484 * offset 0x56 0-3 PIRQA 4-7 PIRQB 485 * offset 0x57 0-3 PIRQC 4-7 PIRQD 486 */ 487 static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 488 { 489 u8 irq; 490 irq = 0; 491 if (pirq <= 4) 492 irq = read_config_nybble(router, 0x56, pirq - 1); 493 dev_info(&dev->dev, 494 "AMD756: dev [%04x:%04x], router PIRQ %d get IRQ %d\n", 495 dev->vendor, dev->device, pirq, irq); 496 return irq; 497 } 498 499 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 500 { 501 dev_info(&dev->dev, 502 "AMD756: dev [%04x:%04x], router PIRQ %d set IRQ %d\n", 503 dev->vendor, dev->device, pirq, irq); 504 if (pirq <= 4) 505 write_config_nybble(router, 0x56, pirq - 1, irq); 506 return 1; 507 } 508 509 /* 510 * PicoPower PT86C523 511 */ 512 static int pirq_pico_get(struct pci_dev *router, struct pci_dev *dev, int pirq) 513 { 514 outb(0x10 + ((pirq - 1) >> 1), 0x24); 515 return ((pirq - 1) & 1) ? (inb(0x26) >> 4) : (inb(0x26) & 0xf); 516 } 517 518 static int pirq_pico_set(struct pci_dev *router, struct pci_dev *dev, int pirq, 519 int irq) 520 { 521 unsigned int x; 522 outb(0x10 + ((pirq - 1) >> 1), 0x24); 523 x = inb(0x26); 524 x = ((pirq - 1) & 1) ? ((x & 0x0f) | (irq << 4)) : ((x & 0xf0) | (irq)); 525 outb(x, 0x26); 526 return 1; 527 } 528 529 #ifdef CONFIG_PCI_BIOS 530 531 static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) 532 { 533 struct pci_dev *bridge; 534 int pin = pci_get_interrupt_pin(dev, &bridge); 535 return pcibios_set_irq_routing(bridge, pin - 1, irq); 536 } 537 538 #endif 539 540 static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 541 { 542 static struct pci_device_id __initdata pirq_440gx[] = { 543 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0) }, 544 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2) }, 545 { }, 546 }; 547 548 /* 440GX has a proprietary PIRQ router -- don't use it */ 549 if (pci_dev_present(pirq_440gx)) 550 return 0; 551 552 switch (device) { 553 case PCI_DEVICE_ID_INTEL_82371FB_0: 554 case PCI_DEVICE_ID_INTEL_82371SB_0: 555 case PCI_DEVICE_ID_INTEL_82371AB_0: 556 case PCI_DEVICE_ID_INTEL_82371MX: 557 case PCI_DEVICE_ID_INTEL_82443MX_0: 558 case PCI_DEVICE_ID_INTEL_82801AA_0: 559 case PCI_DEVICE_ID_INTEL_82801AB_0: 560 case PCI_DEVICE_ID_INTEL_82801BA_0: 561 case PCI_DEVICE_ID_INTEL_82801BA_10: 562 case PCI_DEVICE_ID_INTEL_82801CA_0: 563 case PCI_DEVICE_ID_INTEL_82801CA_12: 564 case PCI_DEVICE_ID_INTEL_82801DB_0: 565 case PCI_DEVICE_ID_INTEL_82801E_0: 566 case PCI_DEVICE_ID_INTEL_82801EB_0: 567 case PCI_DEVICE_ID_INTEL_ESB_1: 568 case PCI_DEVICE_ID_INTEL_ICH6_0: 569 case PCI_DEVICE_ID_INTEL_ICH6_1: 570 case PCI_DEVICE_ID_INTEL_ICH7_0: 571 case PCI_DEVICE_ID_INTEL_ICH7_1: 572 case PCI_DEVICE_ID_INTEL_ICH7_30: 573 case PCI_DEVICE_ID_INTEL_ICH7_31: 574 case PCI_DEVICE_ID_INTEL_TGP_LPC: 575 case PCI_DEVICE_ID_INTEL_ESB2_0: 576 case PCI_DEVICE_ID_INTEL_ICH8_0: 577 case PCI_DEVICE_ID_INTEL_ICH8_1: 578 case PCI_DEVICE_ID_INTEL_ICH8_2: 579 case PCI_DEVICE_ID_INTEL_ICH8_3: 580 case PCI_DEVICE_ID_INTEL_ICH8_4: 581 case PCI_DEVICE_ID_INTEL_ICH9_0: 582 case PCI_DEVICE_ID_INTEL_ICH9_1: 583 case PCI_DEVICE_ID_INTEL_ICH9_2: 584 case PCI_DEVICE_ID_INTEL_ICH9_3: 585 case PCI_DEVICE_ID_INTEL_ICH9_4: 586 case PCI_DEVICE_ID_INTEL_ICH9_5: 587 case PCI_DEVICE_ID_INTEL_EP80579_0: 588 case PCI_DEVICE_ID_INTEL_ICH10_0: 589 case PCI_DEVICE_ID_INTEL_ICH10_1: 590 case PCI_DEVICE_ID_INTEL_ICH10_2: 591 case PCI_DEVICE_ID_INTEL_ICH10_3: 592 case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0: 593 case PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1: 594 r->name = "PIIX/ICH"; 595 r->get = pirq_piix_get; 596 r->set = pirq_piix_set; 597 return 1; 598 } 599 600 if ((device >= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MIN && 601 device <= PCI_DEVICE_ID_INTEL_5_3400_SERIES_LPC_MAX) 602 || (device >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN && 603 device <= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX) 604 || (device >= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN && 605 device <= PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX) 606 || (device >= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN && 607 device <= PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX)) { 608 r->name = "PIIX/ICH"; 609 r->get = pirq_piix_get; 610 r->set = pirq_piix_set; 611 return 1; 612 } 613 614 return 0; 615 } 616 617 static __init int via_router_probe(struct irq_router *r, 618 struct pci_dev *router, u16 device) 619 { 620 /* FIXME: We should move some of the quirk fixup stuff here */ 621 622 /* 623 * workarounds for some buggy BIOSes 624 */ 625 if (device == PCI_DEVICE_ID_VIA_82C586_0) { 626 switch (router->device) { 627 case PCI_DEVICE_ID_VIA_82C686: 628 /* 629 * Asus k7m bios wrongly reports 82C686A 630 * as 586-compatible 631 */ 632 device = PCI_DEVICE_ID_VIA_82C686; 633 break; 634 case PCI_DEVICE_ID_VIA_8235: 635 /** 636 * Asus a7v-x bios wrongly reports 8235 637 * as 586-compatible 638 */ 639 device = PCI_DEVICE_ID_VIA_8235; 640 break; 641 case PCI_DEVICE_ID_VIA_8237: 642 /** 643 * Asus a7v600 bios wrongly reports 8237 644 * as 586-compatible 645 */ 646 device = PCI_DEVICE_ID_VIA_8237; 647 break; 648 } 649 } 650 651 switch (device) { 652 case PCI_DEVICE_ID_VIA_82C586_0: 653 r->name = "VIA"; 654 r->get = pirq_via586_get; 655 r->set = pirq_via586_set; 656 return 1; 657 case PCI_DEVICE_ID_VIA_82C596: 658 case PCI_DEVICE_ID_VIA_82C686: 659 case PCI_DEVICE_ID_VIA_8231: 660 case PCI_DEVICE_ID_VIA_8233A: 661 case PCI_DEVICE_ID_VIA_8235: 662 case PCI_DEVICE_ID_VIA_8237: 663 /* FIXME: add new ones for 8233/5 */ 664 r->name = "VIA"; 665 r->get = pirq_via_get; 666 r->set = pirq_via_set; 667 return 1; 668 } 669 return 0; 670 } 671 672 static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 673 { 674 switch (device) { 675 case PCI_DEVICE_ID_VLSI_82C534: 676 r->name = "VLSI 82C534"; 677 r->get = pirq_vlsi_get; 678 r->set = pirq_vlsi_set; 679 return 1; 680 } 681 return 0; 682 } 683 684 685 static __init int serverworks_router_probe(struct irq_router *r, 686 struct pci_dev *router, u16 device) 687 { 688 switch (device) { 689 case PCI_DEVICE_ID_SERVERWORKS_OSB4: 690 case PCI_DEVICE_ID_SERVERWORKS_CSB5: 691 r->name = "ServerWorks"; 692 r->get = pirq_serverworks_get; 693 r->set = pirq_serverworks_set; 694 return 1; 695 } 696 return 0; 697 } 698 699 static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 700 { 701 if (device != PCI_DEVICE_ID_SI_503) 702 return 0; 703 704 r->name = "SIS"; 705 r->get = pirq_sis_get; 706 r->set = pirq_sis_set; 707 return 1; 708 } 709 710 static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 711 { 712 switch (device) { 713 case PCI_DEVICE_ID_CYRIX_5520: 714 r->name = "NatSemi"; 715 r->get = pirq_cyrix_get; 716 r->set = pirq_cyrix_set; 717 return 1; 718 } 719 return 0; 720 } 721 722 static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 723 { 724 switch (device) { 725 case PCI_DEVICE_ID_OPTI_82C700: 726 r->name = "OPTI"; 727 r->get = pirq_opti_get; 728 r->set = pirq_opti_set; 729 return 1; 730 } 731 return 0; 732 } 733 734 static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 735 { 736 switch (device) { 737 case PCI_DEVICE_ID_ITE_IT8330G_0: 738 r->name = "ITE"; 739 r->get = pirq_ite_get; 740 r->set = pirq_ite_set; 741 return 1; 742 } 743 return 0; 744 } 745 746 static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 747 { 748 switch (device) { 749 case PCI_DEVICE_ID_AL_M1533: 750 case PCI_DEVICE_ID_AL_M1563: 751 r->name = "ALI"; 752 r->get = pirq_ali_get; 753 r->set = pirq_ali_set; 754 return 1; 755 } 756 return 0; 757 } 758 759 static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 760 { 761 switch (device) { 762 case PCI_DEVICE_ID_AMD_VIPER_740B: 763 r->name = "AMD756"; 764 break; 765 case PCI_DEVICE_ID_AMD_VIPER_7413: 766 r->name = "AMD766"; 767 break; 768 case PCI_DEVICE_ID_AMD_VIPER_7443: 769 r->name = "AMD768"; 770 break; 771 default: 772 return 0; 773 } 774 r->get = pirq_amd756_get; 775 r->set = pirq_amd756_set; 776 return 1; 777 } 778 779 static __init int pico_router_probe(struct irq_router *r, struct pci_dev *router, u16 device) 780 { 781 switch (device) { 782 case PCI_DEVICE_ID_PICOPOWER_PT86C523: 783 r->name = "PicoPower PT86C523"; 784 r->get = pirq_pico_get; 785 r->set = pirq_pico_set; 786 return 1; 787 788 case PCI_DEVICE_ID_PICOPOWER_PT86C523BBP: 789 r->name = "PicoPower PT86C523 rev. BB+"; 790 r->get = pirq_pico_get; 791 r->set = pirq_pico_set; 792 return 1; 793 } 794 return 0; 795 } 796 797 static __initdata struct irq_router_handler pirq_routers[] = { 798 { PCI_VENDOR_ID_INTEL, intel_router_probe }, 799 { PCI_VENDOR_ID_AL, ali_router_probe }, 800 { PCI_VENDOR_ID_ITE, ite_router_probe }, 801 { PCI_VENDOR_ID_VIA, via_router_probe }, 802 { PCI_VENDOR_ID_OPTI, opti_router_probe }, 803 { PCI_VENDOR_ID_SI, sis_router_probe }, 804 { PCI_VENDOR_ID_CYRIX, cyrix_router_probe }, 805 { PCI_VENDOR_ID_VLSI, vlsi_router_probe }, 806 { PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe }, 807 { PCI_VENDOR_ID_AMD, amd_router_probe }, 808 { PCI_VENDOR_ID_PICOPOWER, pico_router_probe }, 809 /* Someone with docs needs to add the ATI Radeon IGP */ 810 { 0, NULL } 811 }; 812 static struct irq_router pirq_router; 813 static struct pci_dev *pirq_router_dev; 814 815 816 /* 817 * FIXME: should we have an option to say "generic for 818 * chipset" ? 819 */ 820 821 static void __init pirq_find_router(struct irq_router *r) 822 { 823 struct irq_routing_table *rt = pirq_table; 824 struct irq_router_handler *h; 825 826 #ifdef CONFIG_PCI_BIOS 827 if (!rt->signature) { 828 printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n"); 829 r->set = pirq_bios_set; 830 r->name = "BIOS"; 831 return; 832 } 833 #endif 834 835 /* Default unless a driver reloads it */ 836 r->name = "default"; 837 r->get = NULL; 838 r->set = NULL; 839 840 DBG(KERN_DEBUG "PCI: Attempting to find IRQ router for [%04x:%04x]\n", 841 rt->rtr_vendor, rt->rtr_device); 842 843 pirq_router_dev = pci_get_bus_and_slot(rt->rtr_bus, rt->rtr_devfn); 844 if (!pirq_router_dev) { 845 DBG(KERN_DEBUG "PCI: Interrupt router not found at " 846 "%02x:%02x\n", rt->rtr_bus, rt->rtr_devfn); 847 return; 848 } 849 850 for (h = pirq_routers; h->vendor; h++) { 851 /* First look for a router match */ 852 if (rt->rtr_vendor == h->vendor && 853 h->probe(r, pirq_router_dev, rt->rtr_device)) 854 break; 855 /* Fall back to a device match */ 856 if (pirq_router_dev->vendor == h->vendor && 857 h->probe(r, pirq_router_dev, pirq_router_dev->device)) 858 break; 859 } 860 dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x:%04x]\n", 861 pirq_router.name, 862 pirq_router_dev->vendor, pirq_router_dev->device); 863 864 /* The device remains referenced for the kernel lifetime */ 865 } 866 867 static struct irq_info *pirq_get_info(struct pci_dev *dev) 868 { 869 struct irq_routing_table *rt = pirq_table; 870 int entries = (rt->size - sizeof(struct irq_routing_table)) / 871 sizeof(struct irq_info); 872 struct irq_info *info; 873 874 for (info = rt->slots; entries--; info++) 875 if (info->bus == dev->bus->number && 876 PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn)) 877 return info; 878 return NULL; 879 } 880 881 static int pcibios_lookup_irq(struct pci_dev *dev, int assign) 882 { 883 u8 pin; 884 struct irq_info *info; 885 int i, pirq, newirq; 886 int irq = 0; 887 u32 mask; 888 struct irq_router *r = &pirq_router; 889 struct pci_dev *dev2 = NULL; 890 char *msg = NULL; 891 892 /* Find IRQ pin */ 893 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); 894 if (!pin) { 895 dev_dbg(&dev->dev, "no interrupt pin\n"); 896 return 0; 897 } 898 899 if (io_apic_assign_pci_irqs) 900 return 0; 901 902 /* Find IRQ routing entry */ 903 904 if (!pirq_table) 905 return 0; 906 907 info = pirq_get_info(dev); 908 if (!info) { 909 dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n", 910 'A' + pin - 1); 911 return 0; 912 } 913 pirq = info->irq[pin - 1].link; 914 mask = info->irq[pin - 1].bitmap; 915 if (!pirq) { 916 dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin - 1); 917 return 0; 918 } 919 dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x", 920 'A' + pin - 1, pirq, mask, pirq_table->exclusive_irqs); 921 mask &= pcibios_irq_mask; 922 923 /* Work around broken HP Pavilion Notebooks which assign USB to 924 IRQ 9 even though it is actually wired to IRQ 11 */ 925 926 if (broken_hp_bios_irq9 && pirq == 0x59 && dev->irq == 9) { 927 dev->irq = 11; 928 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); 929 r->set(pirq_router_dev, dev, pirq, 11); 930 } 931 932 /* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */ 933 if (acer_tm360_irqrouting && dev->irq == 11 && 934 dev->vendor == PCI_VENDOR_ID_O2) { 935 pirq = 0x68; 936 mask = 0x400; 937 dev->irq = r->get(pirq_router_dev, dev, pirq); 938 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); 939 } 940 941 /* 942 * Find the best IRQ to assign: use the one 943 * reported by the device if possible. 944 */ 945 newirq = dev->irq; 946 if (newirq && !((1 << newirq) & mask)) { 947 if (pci_probe & PCI_USE_PIRQ_MASK) 948 newirq = 0; 949 else 950 dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask " 951 "%#x; try pci=usepirqmask\n", newirq, mask); 952 } 953 if (!newirq && assign) { 954 for (i = 0; i < 16; i++) { 955 if (!(mask & (1 << i))) 956 continue; 957 if (pirq_penalty[i] < pirq_penalty[newirq] && 958 can_request_irq(i, IRQF_SHARED)) 959 newirq = i; 960 } 961 } 962 dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin - 1, newirq); 963 964 /* Check if it is hardcoded */ 965 if ((pirq & 0xf0) == 0xf0) { 966 irq = pirq & 0xf; 967 msg = "hardcoded"; 968 } else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \ 969 ((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) { 970 msg = "found"; 971 eisa_set_level_irq(irq); 972 } else if (newirq && r->set && 973 (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) { 974 if (r->set(pirq_router_dev, dev, pirq, newirq)) { 975 eisa_set_level_irq(newirq); 976 msg = "assigned"; 977 irq = newirq; 978 } 979 } 980 981 if (!irq) { 982 if (newirq && mask == (1 << newirq)) { 983 msg = "guessed"; 984 irq = newirq; 985 } else { 986 dev_dbg(&dev->dev, "can't route interrupt\n"); 987 return 0; 988 } 989 } 990 dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin - 1, irq); 991 992 /* Update IRQ for all devices with the same pirq value */ 993 for_each_pci_dev(dev2) { 994 pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin); 995 if (!pin) 996 continue; 997 998 info = pirq_get_info(dev2); 999 if (!info) 1000 continue; 1001 if (info->irq[pin - 1].link == pirq) { 1002 /* 1003 * We refuse to override the dev->irq 1004 * information. Give a warning! 1005 */ 1006 if (dev2->irq && dev2->irq != irq && \ 1007 (!(pci_probe & PCI_USE_PIRQ_MASK) || \ 1008 ((1 << dev2->irq) & mask))) { 1009 #ifndef CONFIG_PCI_MSI 1010 dev_info(&dev2->dev, "IRQ routing conflict: " 1011 "have IRQ %d, want IRQ %d\n", 1012 dev2->irq, irq); 1013 #endif 1014 continue; 1015 } 1016 dev2->irq = irq; 1017 pirq_penalty[irq]++; 1018 if (dev != dev2) 1019 dev_info(&dev->dev, "sharing IRQ %d with %s\n", 1020 irq, pci_name(dev2)); 1021 } 1022 } 1023 return 1; 1024 } 1025 1026 void __init pcibios_fixup_irqs(void) 1027 { 1028 struct pci_dev *dev = NULL; 1029 u8 pin; 1030 1031 DBG(KERN_DEBUG "PCI: IRQ fixup\n"); 1032 for_each_pci_dev(dev) { 1033 /* 1034 * If the BIOS has set an out of range IRQ number, just 1035 * ignore it. Also keep track of which IRQ's are 1036 * already in use. 1037 */ 1038 if (dev->irq >= 16) { 1039 dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq); 1040 dev->irq = 0; 1041 } 1042 /* 1043 * If the IRQ is already assigned to a PCI device, 1044 * ignore its ISA use penalty 1045 */ 1046 if (pirq_penalty[dev->irq] >= 100 && 1047 pirq_penalty[dev->irq] < 100000) 1048 pirq_penalty[dev->irq] = 0; 1049 pirq_penalty[dev->irq]++; 1050 } 1051 1052 if (io_apic_assign_pci_irqs) 1053 return; 1054 1055 dev = NULL; 1056 for_each_pci_dev(dev) { 1057 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); 1058 if (!pin) 1059 continue; 1060 1061 /* 1062 * Still no IRQ? Try to lookup one... 1063 */ 1064 if (!dev->irq) 1065 pcibios_lookup_irq(dev, 0); 1066 } 1067 } 1068 1069 /* 1070 * Work around broken HP Pavilion Notebooks which assign USB to 1071 * IRQ 9 even though it is actually wired to IRQ 11 1072 */ 1073 static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d) 1074 { 1075 if (!broken_hp_bios_irq9) { 1076 broken_hp_bios_irq9 = 1; 1077 printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", 1078 d->ident); 1079 } 1080 return 0; 1081 } 1082 1083 /* 1084 * Work around broken Acer TravelMate 360 Notebooks which assign 1085 * Cardbus to IRQ 11 even though it is actually wired to IRQ 10 1086 */ 1087 static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d) 1088 { 1089 if (!acer_tm360_irqrouting) { 1090 acer_tm360_irqrouting = 1; 1091 printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", 1092 d->ident); 1093 } 1094 return 0; 1095 } 1096 1097 static struct dmi_system_id __initdata pciirq_dmi_table[] = { 1098 { 1099 .callback = fix_broken_hp_bios_irq9, 1100 .ident = "HP Pavilion N5400 Series Laptop", 1101 .matches = { 1102 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1103 DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"), 1104 DMI_MATCH(DMI_PRODUCT_VERSION, 1105 "HP Pavilion Notebook Model GE"), 1106 DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), 1107 }, 1108 }, 1109 { 1110 .callback = fix_acer_tm360_irqrouting, 1111 .ident = "Acer TravelMate 36x Laptop", 1112 .matches = { 1113 DMI_MATCH(DMI_SYS_VENDOR, "Acer"), 1114 DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), 1115 }, 1116 }, 1117 { } 1118 }; 1119 1120 void __init pcibios_irq_init(void) 1121 { 1122 DBG(KERN_DEBUG "PCI: IRQ init\n"); 1123 1124 if (raw_pci_ops == NULL) 1125 return; 1126 1127 dmi_check_system(pciirq_dmi_table); 1128 1129 pirq_table = pirq_find_routing_table(); 1130 1131 #ifdef CONFIG_PCI_BIOS 1132 if (!pirq_table && (pci_probe & PCI_BIOS_IRQ_SCAN)) 1133 pirq_table = pcibios_get_irq_routing_table(); 1134 #endif 1135 if (pirq_table) { 1136 pirq_peer_trick(); 1137 pirq_find_router(&pirq_router); 1138 if (pirq_table->exclusive_irqs) { 1139 int i; 1140 for (i = 0; i < 16; i++) 1141 if (!(pirq_table->exclusive_irqs & (1 << i))) 1142 pirq_penalty[i] += 100; 1143 } 1144 /* 1145 * If we're using the I/O APIC, avoid using the PCI IRQ 1146 * routing table 1147 */ 1148 if (io_apic_assign_pci_irqs) 1149 pirq_table = NULL; 1150 } 1151 1152 x86_init.pci.fixup_irqs(); 1153 1154 if (io_apic_assign_pci_irqs && pci_routeirq) { 1155 struct pci_dev *dev = NULL; 1156 /* 1157 * PCI IRQ routing is set up by pci_enable_device(), but we 1158 * also do it here in case there are still broken drivers that 1159 * don't use pci_enable_device(). 1160 */ 1161 printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); 1162 for_each_pci_dev(dev) 1163 pirq_enable_irq(dev); 1164 } 1165 } 1166 1167 static void pirq_penalize_isa_irq(int irq, int active) 1168 { 1169 /* 1170 * If any ISAPnP device reports an IRQ in its list of possible 1171 * IRQ's, we try to avoid assigning it to PCI devices. 1172 */ 1173 if (irq < 16) { 1174 if (active) 1175 pirq_penalty[irq] += 1000; 1176 else 1177 pirq_penalty[irq] += 100; 1178 } 1179 } 1180 1181 void pcibios_penalize_isa_irq(int irq, int active) 1182 { 1183 #ifdef CONFIG_ACPI 1184 if (!acpi_noirq) 1185 acpi_penalize_isa_irq(irq, active); 1186 else 1187 #endif 1188 pirq_penalize_isa_irq(irq, active); 1189 } 1190 1191 static int pirq_enable_irq(struct pci_dev *dev) 1192 { 1193 u8 pin; 1194 1195 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); 1196 if (pin && !pcibios_lookup_irq(dev, 1)) { 1197 char *msg = ""; 1198 1199 if (!io_apic_assign_pci_irqs && dev->irq) 1200 return 0; 1201 1202 if (io_apic_assign_pci_irqs) { 1203 #ifdef CONFIG_X86_IO_APIC 1204 struct pci_dev *temp_dev; 1205 int irq; 1206 struct io_apic_irq_attr irq_attr; 1207 1208 irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, 1209 PCI_SLOT(dev->devfn), 1210 pin - 1, &irq_attr); 1211 /* 1212 * Busses behind bridges are typically not listed in the MP-table. 1213 * In this case we have to look up the IRQ based on the parent bus, 1214 * parent slot, and pin number. The SMP code detects such bridged 1215 * busses itself so we should get into this branch reliably. 1216 */ 1217 temp_dev = dev; 1218 while (irq < 0 && dev->bus->parent) { /* go back to the bridge */ 1219 struct pci_dev *bridge = dev->bus->self; 1220 1221 pin = pci_swizzle_interrupt_pin(dev, pin); 1222 irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number, 1223 PCI_SLOT(bridge->devfn), 1224 pin - 1, &irq_attr); 1225 if (irq >= 0) 1226 dev_warn(&dev->dev, "using bridge %s " 1227 "INT %c to get IRQ %d\n", 1228 pci_name(bridge), 'A' + pin - 1, 1229 irq); 1230 dev = bridge; 1231 } 1232 dev = temp_dev; 1233 if (irq >= 0) { 1234 io_apic_set_pci_routing(&dev->dev, irq, 1235 &irq_attr); 1236 dev->irq = irq; 1237 dev_info(&dev->dev, "PCI->APIC IRQ transform: " 1238 "INT %c -> IRQ %d\n", 'A' + pin - 1, irq); 1239 return 0; 1240 } else 1241 msg = "; probably buggy MP table"; 1242 #endif 1243 } else if (pci_probe & PCI_BIOS_IRQ_SCAN) 1244 msg = ""; 1245 else 1246 msg = "; please try using pci=biosirq"; 1247 1248 /* 1249 * With IDE legacy devices the IRQ lookup failure is not 1250 * a problem.. 1251 */ 1252 if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && 1253 !(dev->class & 0x5)) 1254 return 0; 1255 1256 dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n", 1257 'A' + pin - 1, msg); 1258 } 1259 return 0; 1260 } 1261