1 /* 2 * Intel MID PCI support 3 * Copyright (c) 2008 Intel Corporation 4 * Jesse Barnes <jesse.barnes@intel.com> 5 * 6 * Moorestown has an interesting PCI implementation: 7 * - configuration space is memory mapped (as defined by MCFG) 8 * - Lincroft devices also have a real, type 1 configuration space 9 * - Early Lincroft silicon has a type 1 access bug that will cause 10 * a hang if non-existent devices are accessed 11 * - some devices have the "fixed BAR" capability, which means 12 * they can't be relocated or modified; check for that during 13 * BAR sizing 14 * 15 * So, we use the MCFG space for all reads and writes, but also send 16 * Lincroft writes to type 1 space. But only read/write if the device 17 * actually exists, otherwise return all 1s for reads and bit bucket 18 * the writes. 19 */ 20 21 #include <linux/sched.h> 22 #include <linux/pci.h> 23 #include <linux/ioport.h> 24 #include <linux/init.h> 25 #include <linux/dmi.h> 26 #include <linux/acpi.h> 27 #include <linux/io.h> 28 #include <linux/smp.h> 29 30 #include <asm/segment.h> 31 #include <asm/pci_x86.h> 32 #include <asm/hw_irq.h> 33 #include <asm/io_apic.h> 34 #include <asm/intel-mid.h> 35 36 #define PCIE_CAP_OFFSET 0x100 37 38 /* Fixed BAR fields */ 39 #define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */ 40 #define PCI_FIXED_BAR_0_SIZE 0x04 41 #define PCI_FIXED_BAR_1_SIZE 0x08 42 #define PCI_FIXED_BAR_2_SIZE 0x0c 43 #define PCI_FIXED_BAR_3_SIZE 0x10 44 #define PCI_FIXED_BAR_4_SIZE 0x14 45 #define PCI_FIXED_BAR_5_SIZE 0x1c 46 47 static int pci_soc_mode; 48 49 /** 50 * fixed_bar_cap - return the offset of the fixed BAR cap if found 51 * @bus: PCI bus 52 * @devfn: device in question 53 * 54 * Look for the fixed BAR cap on @bus and @devfn, returning its offset 55 * if found or 0 otherwise. 56 */ 57 static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn) 58 { 59 int pos; 60 u32 pcie_cap = 0, cap_data; 61 62 pos = PCIE_CAP_OFFSET; 63 64 if (!raw_pci_ext_ops) 65 return 0; 66 67 while (pos) { 68 if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number, 69 devfn, pos, 4, &pcie_cap)) 70 return 0; 71 72 if (PCI_EXT_CAP_ID(pcie_cap) == 0x0000 || 73 PCI_EXT_CAP_ID(pcie_cap) == 0xffff) 74 break; 75 76 if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) { 77 raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number, 78 devfn, pos + 4, 4, &cap_data); 79 if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR) 80 return pos; 81 } 82 83 pos = PCI_EXT_CAP_NEXT(pcie_cap); 84 } 85 86 return 0; 87 } 88 89 static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn, 90 int reg, int len, u32 val, int offset) 91 { 92 u32 size; 93 unsigned int domain, busnum; 94 int bar = (reg - PCI_BASE_ADDRESS_0) >> 2; 95 96 domain = pci_domain_nr(bus); 97 busnum = bus->number; 98 99 if (val == ~0 && len == 4) { 100 unsigned long decode; 101 102 raw_pci_ext_ops->read(domain, busnum, devfn, 103 offset + 8 + (bar * 4), 4, &size); 104 105 /* Turn the size into a decode pattern for the sizing code */ 106 if (size) { 107 decode = size - 1; 108 decode |= decode >> 1; 109 decode |= decode >> 2; 110 decode |= decode >> 4; 111 decode |= decode >> 8; 112 decode |= decode >> 16; 113 decode++; 114 decode = ~(decode - 1); 115 } else { 116 decode = 0; 117 } 118 119 /* 120 * If val is all ones, the core code is trying to size the reg, 121 * so update the mmconfig space with the real size. 122 * 123 * Note: this assumes the fixed size we got is a power of two. 124 */ 125 return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4, 126 decode); 127 } 128 129 /* This is some other kind of BAR write, so just do it. */ 130 return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val); 131 } 132 133 /** 134 * type1_access_ok - check whether to use type 1 135 * @bus: bus number 136 * @devfn: device & function in question 137 * 138 * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at 139 * all, the we can go ahead with any reads & writes. If it's on a Lincroft, 140 * but doesn't exist, avoid the access altogether to keep the chip from 141 * hanging. 142 */ 143 static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) 144 { 145 /* 146 * This is a workaround for A0 LNC bug where PCI status register does 147 * not have new CAP bit set. can not be written by SW either. 148 * 149 * PCI header type in real LNC indicates a single function device, this 150 * will prevent probing other devices under the same function in PCI 151 * shim. Therefore, use the header type in shim instead. 152 */ 153 if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE) 154 return false; 155 if (bus == 0 && (devfn == PCI_DEVFN(2, 0) 156 || devfn == PCI_DEVFN(0, 0) 157 || devfn == PCI_DEVFN(3, 0))) 158 return true; 159 return false; /* Langwell on others */ 160 } 161 162 static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, 163 int size, u32 *value) 164 { 165 if (type1_access_ok(bus->number, devfn, where)) 166 return pci_direct_conf1.read(pci_domain_nr(bus), bus->number, 167 devfn, where, size, value); 168 return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number, 169 devfn, where, size, value); 170 } 171 172 static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, 173 int size, u32 value) 174 { 175 int offset; 176 177 /* 178 * On MRST, there is no PCI ROM BAR, this will cause a subsequent read 179 * to ROM BAR return 0 then being ignored. 180 */ 181 if (where == PCI_ROM_ADDRESS) 182 return 0; 183 184 /* 185 * Devices with fixed BARs need special handling: 186 * - BAR sizing code will save, write ~0, read size, restore 187 * - so writes to fixed BARs need special handling 188 * - other writes to fixed BAR devices should go through mmconfig 189 */ 190 offset = fixed_bar_cap(bus, devfn); 191 if (offset && 192 (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) { 193 return pci_device_update_fixed(bus, devfn, where, size, value, 194 offset); 195 } 196 197 /* 198 * On Moorestown update both real & mmconfig space 199 * Note: early Lincroft silicon can't handle type 1 accesses to 200 * non-existent devices, so just eat the write in that case. 201 */ 202 if (type1_access_ok(bus->number, devfn, where)) 203 return pci_direct_conf1.write(pci_domain_nr(bus), bus->number, 204 devfn, where, size, value); 205 return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn, 206 where, size, value); 207 } 208 209 static int intel_mid_pci_irq_enable(struct pci_dev *dev) 210 { 211 int polarity; 212 213 if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER) 214 polarity = 0; /* active high */ 215 else 216 polarity = 1; /* active low */ 217 218 /* 219 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to 220 * IOAPIC RTE entries, so we just enable RTE for the device. 221 */ 222 if (mp_set_gsi_attr(dev->irq, 1, polarity, dev_to_node(&dev->dev))) 223 return -EBUSY; 224 if (mp_map_gsi_to_irq(dev->irq, IOAPIC_MAP_ALLOC) < 0) 225 return -EBUSY; 226 227 return 0; 228 } 229 230 static void intel_mid_pci_irq_disable(struct pci_dev *dev) 231 { 232 if (!mp_should_keep_irq(&dev->dev) && dev->irq > 0) 233 mp_unmap_irq(dev->irq); 234 } 235 236 struct pci_ops intel_mid_pci_ops = { 237 .read = pci_read, 238 .write = pci_write, 239 }; 240 241 /** 242 * intel_mid_pci_init - installs intel_mid_pci_ops 243 * 244 * Moorestown has an interesting PCI implementation (see above). 245 * Called when the early platform detection installs it. 246 */ 247 int __init intel_mid_pci_init(void) 248 { 249 pr_info("Intel MID platform detected, using MID PCI ops\n"); 250 pci_mmcfg_late_init(); 251 pcibios_enable_irq = intel_mid_pci_irq_enable; 252 pcibios_disable_irq = intel_mid_pci_irq_disable; 253 pci_root_ops = intel_mid_pci_ops; 254 pci_soc_mode = 1; 255 /* Continue with standard init */ 256 return 1; 257 } 258 259 /* 260 * Langwell devices are not true PCI devices; they are not subject to 10 ms 261 * d3 to d0 delay required by PCI spec. 262 */ 263 static void pci_d3delay_fixup(struct pci_dev *dev) 264 { 265 /* 266 * PCI fixups are effectively decided compile time. If we have a dual 267 * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices. 268 */ 269 if (!pci_soc_mode) 270 return; 271 /* 272 * True PCI devices in Lincroft should allow type 1 access, the rest 273 * are Langwell fake PCI devices. 274 */ 275 if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID)) 276 return; 277 dev->d3_delay = 0; 278 } 279 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup); 280 281 static void mrst_power_off_unused_dev(struct pci_dev *dev) 282 { 283 pci_set_power_state(dev, PCI_D3hot); 284 } 285 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev); 286 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev); 287 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev); 288 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0812, mrst_power_off_unused_dev); 289 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev); 290 291 /* 292 * Langwell devices reside at fixed offsets, don't try to move them. 293 */ 294 static void pci_fixed_bar_fixup(struct pci_dev *dev) 295 { 296 unsigned long offset; 297 u32 size; 298 int i; 299 300 if (!pci_soc_mode) 301 return; 302 303 /* Must have extended configuration space */ 304 if (dev->cfg_size < PCIE_CAP_OFFSET + 4) 305 return; 306 307 /* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */ 308 offset = fixed_bar_cap(dev->bus, dev->devfn); 309 if (!offset || PCI_DEVFN(2, 0) == dev->devfn || 310 PCI_DEVFN(2, 2) == dev->devfn) 311 return; 312 313 for (i = 0; i < PCI_ROM_RESOURCE; i++) { 314 pci_read_config_dword(dev, offset + 8 + (i * 4), &size); 315 dev->resource[i].end = dev->resource[i].start + size - 1; 316 dev->resource[i].flags |= IORESOURCE_PCI_FIXED; 317 } 318 } 319 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup); 320