xref: /linux/arch/x86/pci/i386.c (revision d39d0ed196aa1685bb24771e92f78633c66ac9cb)
1 /*
2  *	Low-Level PCI Access for i386 machines
3  *
4  * Copyright 1993, 1994 Drew Eckhardt
5  *      Visionary Computing
6  *      (Unix and Linux consulting and custom programming)
7  *      Drew@Colorado.EDU
8  *      +1 (303) 786-7975
9  *
10  * Drew's work was sponsored by:
11  *	iX Multiuser Multitasking Magazine
12  *	Hannover, Germany
13  *	hm@ix.de
14  *
15  * Copyright 1997--2000 Martin Mares <mj@ucw.cz>
16  *
17  * For more information, please consult the following manuals (look at
18  * http://www.pcisig.com/ for how to get them):
19  *
20  * PCI BIOS Specification
21  * PCI Local Bus Specification
22  * PCI to PCI Bridge Specification
23  * PCI System Design Guide
24  *
25  */
26 
27 #include <linux/types.h>
28 #include <linux/kernel.h>
29 #include <linux/pci.h>
30 #include <linux/init.h>
31 #include <linux/ioport.h>
32 #include <linux/errno.h>
33 #include <linux/bootmem.h>
34 
35 #include <asm/pat.h>
36 #include <asm/e820.h>
37 #include <asm/pci_x86.h>
38 #include <asm/io_apic.h>
39 
40 
41 static int
42 skip_isa_ioresource_align(struct pci_dev *dev) {
43 
44 	if ((pci_probe & PCI_CAN_SKIP_ISA_ALIGN) &&
45 	    !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA))
46 		return 1;
47 	return 0;
48 }
49 
50 /*
51  * We need to avoid collisions with `mirrored' VGA ports
52  * and other strange ISA hardware, so we always want the
53  * addresses to be allocated in the 0x000-0x0ff region
54  * modulo 0x400.
55  *
56  * Why? Because some silly external IO cards only decode
57  * the low 10 bits of the IO address. The 0x00-0xff region
58  * is reserved for motherboard devices that decode all 16
59  * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
60  * but we want to try to avoid allocating at 0x2900-0x2bff
61  * which might have be mirrored at 0x0100-0x03ff..
62  */
63 resource_size_t
64 pcibios_align_resource(void *data, const struct resource *res,
65 			resource_size_t size, resource_size_t align)
66 {
67 	struct pci_dev *dev = data;
68 	resource_size_t start = res->start;
69 
70 	if (res->flags & IORESOURCE_IO) {
71 		if (skip_isa_ioresource_align(dev))
72 			return start;
73 		if (start & 0x300)
74 			start = (start + 0x3ff) & ~0x3ff;
75 	} else if (res->flags & IORESOURCE_MEM) {
76 		if (start < BIOS_END)
77 			start = BIOS_END;
78 	}
79 	return start;
80 }
81 EXPORT_SYMBOL(pcibios_align_resource);
82 
83 /*
84  *  Handle resources of PCI devices.  If the world were perfect, we could
85  *  just allocate all the resource regions and do nothing more.  It isn't.
86  *  On the other hand, we cannot just re-allocate all devices, as it would
87  *  require us to know lots of host bridge internals.  So we attempt to
88  *  keep as much of the original configuration as possible, but tweak it
89  *  when it's found to be wrong.
90  *
91  *  Known BIOS problems we have to work around:
92  *	- I/O or memory regions not configured
93  *	- regions configured, but not enabled in the command register
94  *	- bogus I/O addresses above 64K used
95  *	- expansion ROMs left enabled (this may sound harmless, but given
96  *	  the fact the PCI specs explicitly allow address decoders to be
97  *	  shared between expansion ROMs and other resource regions, it's
98  *	  at least dangerous)
99  *	- bad resource sizes or overlaps with other regions
100  *
101  *  Our solution:
102  *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
103  *	    This gives us fixed barriers on where we can allocate.
104  *	(2) Allocate resources for all enabled devices.  If there is
105  *	    a collision, just mark the resource as unallocated. Also
106  *	    disable expansion ROMs during this step.
107  *	(3) Try to allocate resources for disabled devices.  If the
108  *	    resources were assigned correctly, everything goes well,
109  *	    if they weren't, they won't disturb allocation of other
110  *	    resources.
111  *	(4) Assign new addresses to resources which were either
112  *	    not configured at all or misconfigured.  If explicitly
113  *	    requested by the user, configure expansion ROM address
114  *	    as well.
115  */
116 
117 static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
118 {
119 	struct pci_bus *bus;
120 	struct pci_dev *dev;
121 	int idx;
122 	struct resource *r;
123 
124 	/* Depth-First Search on bus tree */
125 	list_for_each_entry(bus, bus_list, node) {
126 		if ((dev = bus->self)) {
127 			for (idx = PCI_BRIDGE_RESOURCES;
128 			    idx < PCI_NUM_RESOURCES; idx++) {
129 				r = &dev->resource[idx];
130 				if (!r->flags)
131 					continue;
132 				if (!r->start ||
133 				    pci_claim_resource(dev, idx) < 0) {
134 					/*
135 					 * Something is wrong with the region.
136 					 * Invalidate the resource to prevent
137 					 * child resource allocations in this
138 					 * range.
139 					 */
140 					r->start = r->end = 0;
141 					r->flags = 0;
142 				}
143 			}
144 		}
145 		pcibios_allocate_bus_resources(&bus->children);
146 	}
147 }
148 
149 struct pci_check_idx_range {
150 	int start;
151 	int end;
152 };
153 
154 static void __init pcibios_allocate_resources(int pass)
155 {
156 	struct pci_dev *dev = NULL;
157 	int idx, disabled, i;
158 	u16 command;
159 	struct resource *r;
160 
161 	struct pci_check_idx_range idx_range[] = {
162 		{ PCI_STD_RESOURCES, PCI_STD_RESOURCE_END },
163 #ifdef CONFIG_PCI_IOV
164 		{ PCI_IOV_RESOURCES, PCI_IOV_RESOURCE_END },
165 #endif
166 	};
167 
168 	for_each_pci_dev(dev) {
169 		pci_read_config_word(dev, PCI_COMMAND, &command);
170 		for (i = 0; i < ARRAY_SIZE(idx_range); i++)
171 		for (idx = idx_range[i].start; idx <= idx_range[i].end; idx++) {
172 			r = &dev->resource[idx];
173 			if (r->parent)		/* Already allocated */
174 				continue;
175 			if (!r->start)		/* Address not assigned at all */
176 				continue;
177 			if (r->flags & IORESOURCE_IO)
178 				disabled = !(command & PCI_COMMAND_IO);
179 			else
180 				disabled = !(command & PCI_COMMAND_MEMORY);
181 			if (pass == disabled) {
182 				dev_dbg(&dev->dev,
183 					"BAR %d: reserving %pr (d=%d, p=%d)\n",
184 					idx, r, disabled, pass);
185 				if (pci_claim_resource(dev, idx) < 0) {
186 					/* We'll assign a new address later */
187 					dev->fw_addr[idx] = r->start;
188 					r->end -= r->start;
189 					r->start = 0;
190 				}
191 			}
192 		}
193 		if (!pass) {
194 			r = &dev->resource[PCI_ROM_RESOURCE];
195 			if (r->flags & IORESOURCE_ROM_ENABLE) {
196 				/* Turn the ROM off, leave the resource region,
197 				 * but keep it unregistered. */
198 				u32 reg;
199 				dev_dbg(&dev->dev, "disabling ROM %pR\n", r);
200 				r->flags &= ~IORESOURCE_ROM_ENABLE;
201 				pci_read_config_dword(dev,
202 						dev->rom_base_reg, &reg);
203 				pci_write_config_dword(dev, dev->rom_base_reg,
204 						reg & ~PCI_ROM_ADDRESS_ENABLE);
205 			}
206 		}
207 	}
208 }
209 
210 static int __init pcibios_assign_resources(void)
211 {
212 	struct pci_dev *dev = NULL;
213 	struct resource *r;
214 
215 	if (!(pci_probe & PCI_ASSIGN_ROMS)) {
216 		/*
217 		 * Try to use BIOS settings for ROMs, otherwise let
218 		 * pci_assign_unassigned_resources() allocate the new
219 		 * addresses.
220 		 */
221 		for_each_pci_dev(dev) {
222 			r = &dev->resource[PCI_ROM_RESOURCE];
223 			if (!r->flags || !r->start)
224 				continue;
225 			if (pci_claim_resource(dev, PCI_ROM_RESOURCE) < 0) {
226 				r->end -= r->start;
227 				r->start = 0;
228 			}
229 		}
230 	}
231 
232 	pci_assign_unassigned_resources();
233 
234 	return 0;
235 }
236 
237 void __init pcibios_resource_survey(void)
238 {
239 	DBG("PCI: Allocating resources\n");
240 	pcibios_allocate_bus_resources(&pci_root_buses);
241 	pcibios_allocate_resources(0);
242 	pcibios_allocate_resources(1);
243 
244 	e820_reserve_resources_late();
245 	/*
246 	 * Insert the IO APIC resources after PCI initialization has
247 	 * occured to handle IO APICS that are mapped in on a BAR in
248 	 * PCI space, but before trying to assign unassigned pci res.
249 	 */
250 	ioapic_insert_resources();
251 }
252 
253 /**
254  * called in fs_initcall (one below subsys_initcall),
255  * give a chance for motherboard reserve resources
256  */
257 fs_initcall(pcibios_assign_resources);
258 
259 /*
260  *  If we set up a device for bus mastering, we need to check the latency
261  *  timer as certain crappy BIOSes forget to set it properly.
262  */
263 unsigned int pcibios_max_latency = 255;
264 
265 void pcibios_set_master(struct pci_dev *dev)
266 {
267 	u8 lat;
268 	pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
269 	if (lat < 16)
270 		lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
271 	else if (lat > pcibios_max_latency)
272 		lat = pcibios_max_latency;
273 	else
274 		return;
275 	dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
276 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
277 }
278 
279 static const struct vm_operations_struct pci_mmap_ops = {
280 	.access = generic_access_phys,
281 };
282 
283 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
284 			enum pci_mmap_state mmap_state, int write_combine)
285 {
286 	unsigned long prot;
287 
288 	/* I/O space cannot be accessed via normal processor loads and
289 	 * stores on this platform.
290 	 */
291 	if (mmap_state == pci_mmap_io)
292 		return -EINVAL;
293 
294 	prot = pgprot_val(vma->vm_page_prot);
295 
296 	/*
297  	 * Return error if pat is not enabled and write_combine is requested.
298  	 * Caller can followup with UC MINUS request and add a WC mtrr if there
299  	 * is a free mtrr slot.
300  	 */
301 	if (!pat_enabled && write_combine)
302 		return -EINVAL;
303 
304 	if (pat_enabled && write_combine)
305 		prot |= _PAGE_CACHE_WC;
306 	else if (pat_enabled || boot_cpu_data.x86 > 3)
307 		/*
308 		 * ioremap() and ioremap_nocache() defaults to UC MINUS for now.
309 		 * To avoid attribute conflicts, request UC MINUS here
310 		 * aswell.
311 		 */
312 		prot |= _PAGE_CACHE_UC_MINUS;
313 
314 	vma->vm_page_prot = __pgprot(prot);
315 
316 	if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
317 			       vma->vm_end - vma->vm_start,
318 			       vma->vm_page_prot))
319 		return -EAGAIN;
320 
321 	vma->vm_ops = &pci_mmap_ops;
322 
323 	return 0;
324 }
325