1 // SPDX-License-Identifier: GPL-2.0 2 3 #define pr_fmt(fmt) "PCI: " fmt 4 5 #include <linux/pci.h> 6 #include <linux/acpi.h> 7 #include <linux/init.h> 8 #include <linux/irq.h> 9 #include <linux/dmi.h> 10 #include <linux/slab.h> 11 #include <linux/pci-acpi.h> 12 #include <asm/numa.h> 13 #include <asm/pci_x86.h> 14 15 struct pci_root_info { 16 struct acpi_pci_root_info common; 17 struct pci_sysdata sd; 18 #ifdef CONFIG_PCI_MMCONFIG 19 bool mcfg_added; 20 u8 start_bus; 21 u8 end_bus; 22 #endif 23 }; 24 25 bool pci_use_e820 = true; 26 static bool pci_use_crs = true; 27 static bool pci_ignore_seg; 28 29 static int __init set_use_crs(const struct dmi_system_id *id) 30 { 31 pci_use_crs = true; 32 return 0; 33 } 34 35 static int __init set_nouse_crs(const struct dmi_system_id *id) 36 { 37 pci_use_crs = false; 38 return 0; 39 } 40 41 static int __init set_ignore_seg(const struct dmi_system_id *id) 42 { 43 pr_info("%s detected: ignoring ACPI _SEG\n", id->ident); 44 pci_ignore_seg = true; 45 return 0; 46 } 47 48 static int __init set_no_e820(const struct dmi_system_id *id) 49 { 50 pr_info("%s detected: not clipping E820 regions from _CRS\n", 51 id->ident); 52 pci_use_e820 = false; 53 return 0; 54 } 55 56 static const struct dmi_system_id pci_crs_quirks[] __initconst = { 57 /* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */ 58 { 59 .callback = set_use_crs, 60 .ident = "IBM System x3800", 61 .matches = { 62 DMI_MATCH(DMI_SYS_VENDOR, "IBM"), 63 DMI_MATCH(DMI_PRODUCT_NAME, "x3800"), 64 }, 65 }, 66 /* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */ 67 /* 2006 AMD HT/VIA system with two host bridges */ 68 { 69 .callback = set_use_crs, 70 .ident = "ASRock ALiveSATA2-GLAN", 71 .matches = { 72 DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"), 73 }, 74 }, 75 /* https://bugzilla.kernel.org/show_bug.cgi?id=30552 */ 76 /* 2006 AMD HT/VIA system with two host bridges */ 77 { 78 .callback = set_use_crs, 79 .ident = "ASUS M2V-MX SE", 80 .matches = { 81 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 82 DMI_MATCH(DMI_BOARD_NAME, "M2V-MX SE"), 83 DMI_MATCH(DMI_BIOS_VENDOR, "American Megatrends Inc."), 84 }, 85 }, 86 /* https://bugzilla.kernel.org/show_bug.cgi?id=42619 */ 87 { 88 .callback = set_use_crs, 89 .ident = "MSI MS-7253", 90 .matches = { 91 DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), 92 DMI_MATCH(DMI_BOARD_NAME, "MS-7253"), 93 DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), 94 }, 95 }, 96 /* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/931368 */ 97 /* https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1033299 */ 98 { 99 .callback = set_use_crs, 100 .ident = "Foxconn K8M890-8237A", 101 .matches = { 102 DMI_MATCH(DMI_BOARD_VENDOR, "Foxconn"), 103 DMI_MATCH(DMI_BOARD_NAME, "K8M890-8237A"), 104 DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies, LTD"), 105 }, 106 }, 107 108 /* Now for the blacklist.. */ 109 110 /* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */ 111 { 112 .callback = set_nouse_crs, 113 .ident = "Dell Studio 1557", 114 .matches = { 115 DMI_MATCH(DMI_BOARD_VENDOR, "Dell Inc."), 116 DMI_MATCH(DMI_PRODUCT_NAME, "Studio 1557"), 117 DMI_MATCH(DMI_BIOS_VERSION, "A09"), 118 }, 119 }, 120 /* https://bugzilla.redhat.com/show_bug.cgi?id=769657 */ 121 { 122 .callback = set_nouse_crs, 123 .ident = "Thinkpad SL510", 124 .matches = { 125 DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"), 126 DMI_MATCH(DMI_BOARD_NAME, "2847DFG"), 127 DMI_MATCH(DMI_BIOS_VERSION, "6JET85WW (1.43 )"), 128 }, 129 }, 130 /* https://bugzilla.kernel.org/show_bug.cgi?id=42606 */ 131 { 132 .callback = set_nouse_crs, 133 .ident = "Supermicro X8DTH", 134 .matches = { 135 DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"), 136 DMI_MATCH(DMI_PRODUCT_NAME, "X8DTH-i/6/iF/6F"), 137 DMI_MATCH(DMI_BIOS_VERSION, "2.0a"), 138 }, 139 }, 140 141 /* https://bugzilla.kernel.org/show_bug.cgi?id=15362 */ 142 { 143 .callback = set_ignore_seg, 144 .ident = "HP xw9300", 145 .matches = { 146 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 147 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"), 148 }, 149 }, 150 151 /* 152 * Many Lenovo models with "IIL" in their DMI_PRODUCT_VERSION have 153 * an E820 reserved region that covers the entire 32-bit host 154 * bridge memory window from _CRS. Using the E820 region to clip 155 * _CRS means no space is available for hot-added or uninitialized 156 * PCI devices. This typically breaks I2C controllers for touchpads 157 * and hot-added Thunderbolt devices. See the commit log for 158 * models known to require this quirk and related bug reports. 159 */ 160 { 161 .callback = set_no_e820, 162 .ident = "Lenovo *IIL* product version", 163 .matches = { 164 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), 165 DMI_MATCH(DMI_PRODUCT_VERSION, "IIL"), 166 }, 167 }, 168 169 /* 170 * The Acer Spin 5 (SP513-54N) has the same E820 reservation covering 171 * the entire _CRS 32-bit window issue as the Lenovo *IIL* models. 172 * See https://bugs.launchpad.net/bugs/1884232 173 */ 174 { 175 .callback = set_no_e820, 176 .ident = "Acer Spin 5 (SP513-54N)", 177 .matches = { 178 DMI_MATCH(DMI_SYS_VENDOR, "Acer"), 179 DMI_MATCH(DMI_PRODUCT_NAME, "Spin SP513-54N"), 180 }, 181 }, 182 183 /* 184 * Clevo X170KM-G barebones have the same E820 reservation covering 185 * the entire _CRS 32-bit window issue as the Lenovo *IIL* models. 186 * See https://bugzilla.kernel.org/show_bug.cgi?id=214259 187 */ 188 { 189 .callback = set_no_e820, 190 .ident = "Clevo X170KM-G Barebone", 191 .matches = { 192 DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"), 193 }, 194 }, 195 {} 196 }; 197 198 void __init pci_acpi_crs_quirks(void) 199 { 200 int year = dmi_get_bios_year(); 201 202 if (year >= 0 && year < 2008 && iomem_resource.end <= 0xffffffff) 203 pci_use_crs = false; 204 205 /* 206 * Some firmware includes unusable space (host bridge registers, 207 * hidden PCI device BARs, etc) in PCI host bridge _CRS. This is a 208 * firmware defect, and 4dc2287c1805 ("x86: avoid E820 regions when 209 * allocating address space") has clipped out the unusable space in 210 * the past. 211 * 212 * But other firmware supplies E820 reserved regions that cover 213 * entire _CRS windows, so clipping throws away the entire window, 214 * leaving none for hot-added or uninitialized devices. These E820 215 * entries are probably *not* a firmware defect, so disable the 216 * clipping by default for post-2022 machines. 217 * 218 * We already have quirks to disable clipping for pre-2023 219 * machines, and we'll likely need quirks to *enable* clipping for 220 * post-2022 machines that incorrectly include unusable space in 221 * _CRS. 222 */ 223 if (year >= 2023) 224 pci_use_e820 = false; 225 226 dmi_check_system(pci_crs_quirks); 227 228 /* 229 * If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that 230 * takes precedence over anything we figured out above. 231 */ 232 if (pci_probe & PCI_ROOT_NO_CRS) 233 pci_use_crs = false; 234 else if (pci_probe & PCI_USE__CRS) 235 pci_use_crs = true; 236 237 pr_info("%s host bridge windows from ACPI; if necessary, use \"pci=%s\" and report a bug\n", 238 pci_use_crs ? "Using" : "Ignoring", 239 pci_use_crs ? "nocrs" : "use_crs"); 240 241 /* "pci=use_e820"/"pci=no_e820" on the kernel cmdline takes precedence */ 242 if (pci_probe & PCI_NO_E820) 243 pci_use_e820 = false; 244 else if (pci_probe & PCI_USE_E820) 245 pci_use_e820 = true; 246 247 pr_info("%s E820 reservations for host bridge windows\n", 248 pci_use_e820 ? "Using" : "Ignoring"); 249 if (pci_probe & (PCI_NO_E820 | PCI_USE_E820)) 250 pr_info("Please notify linux-pci@vger.kernel.org so future kernels can do this automatically\n"); 251 } 252 253 #ifdef CONFIG_PCI_MMCONFIG 254 static int check_segment(u16 seg, struct device *dev, char *estr) 255 { 256 if (seg) { 257 dev_err(dev, "%s can't access configuration space under this host bridge\n", 258 estr); 259 return -EIO; 260 } 261 262 /* 263 * Failure in adding MMCFG information is not fatal, 264 * just can't access extended configuration space of 265 * devices under this host bridge. 266 */ 267 dev_warn(dev, "%s can't access extended configuration space under this bridge\n", 268 estr); 269 270 return 0; 271 } 272 273 static int setup_mcfg_map(struct acpi_pci_root_info *ci) 274 { 275 int result, seg; 276 struct pci_root_info *info; 277 struct acpi_pci_root *root = ci->root; 278 struct device *dev = &ci->bridge->dev; 279 280 info = container_of(ci, struct pci_root_info, common); 281 info->start_bus = (u8)root->secondary.start; 282 info->end_bus = (u8)root->secondary.end; 283 info->mcfg_added = false; 284 seg = info->sd.domain; 285 286 dev_dbg(dev, "%s(%04x %pR ECAM %pa)\n", __func__, seg, 287 &root->secondary, &root->mcfg_addr); 288 289 /* return success if MMCFG is not in use */ 290 if (raw_pci_ext_ops && raw_pci_ext_ops != &pci_mmcfg) 291 return 0; 292 293 if (!(pci_probe & PCI_PROBE_MMCONF)) 294 return check_segment(seg, dev, "MMCONFIG is disabled,"); 295 296 result = pci_mmconfig_insert(dev, seg, info->start_bus, info->end_bus, 297 root->mcfg_addr); 298 if (result == 0) { 299 /* enable MMCFG if it hasn't been enabled yet */ 300 if (raw_pci_ext_ops == NULL) 301 raw_pci_ext_ops = &pci_mmcfg; 302 info->mcfg_added = true; 303 } else if (result != -EEXIST) 304 return check_segment(seg, dev, 305 "fail to add MMCONFIG information,"); 306 307 return 0; 308 } 309 310 static void teardown_mcfg_map(struct acpi_pci_root_info *ci) 311 { 312 struct pci_root_info *info; 313 314 info = container_of(ci, struct pci_root_info, common); 315 if (info->mcfg_added) { 316 pci_mmconfig_delete(info->sd.domain, 317 info->start_bus, info->end_bus); 318 info->mcfg_added = false; 319 } 320 } 321 #else 322 static int setup_mcfg_map(struct acpi_pci_root_info *ci) 323 { 324 return 0; 325 } 326 327 static void teardown_mcfg_map(struct acpi_pci_root_info *ci) 328 { 329 } 330 #endif 331 332 static int pci_acpi_root_get_node(struct acpi_pci_root *root) 333 { 334 int busnum = root->secondary.start; 335 struct acpi_device *device = root->device; 336 int node = acpi_get_node(device->handle); 337 338 if (node == NUMA_NO_NODE) { 339 node = x86_pci_root_bus_node(busnum); 340 if (node != 0 && node != NUMA_NO_NODE) 341 dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n", 342 node); 343 } 344 if (node != NUMA_NO_NODE && !node_online(node)) 345 node = NUMA_NO_NODE; 346 347 return node; 348 } 349 350 static int pci_acpi_root_init_info(struct acpi_pci_root_info *ci) 351 { 352 return setup_mcfg_map(ci); 353 } 354 355 static void pci_acpi_root_release_info(struct acpi_pci_root_info *ci) 356 { 357 teardown_mcfg_map(ci); 358 kfree(container_of(ci, struct pci_root_info, common)); 359 } 360 361 /* 362 * An IO port or MMIO resource assigned to a PCI host bridge may be 363 * consumed by the host bridge itself or available to its child 364 * bus/devices. The ACPI specification defines a bit (Producer/Consumer) 365 * to tell whether the resource is consumed by the host bridge itself, 366 * but firmware hasn't used that bit consistently, so we can't rely on it. 367 * 368 * On x86 and IA64 platforms, all IO port and MMIO resources are assumed 369 * to be available to child bus/devices except one special case: 370 * IO port [0xCF8-0xCFF] is consumed by the host bridge itself 371 * to access PCI configuration space. 372 * 373 * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. 374 */ 375 static bool resource_is_pcicfg_ioport(struct resource *res) 376 { 377 return (res->flags & IORESOURCE_IO) && 378 res->start == 0xCF8 && res->end == 0xCFF; 379 } 380 381 static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci) 382 { 383 struct acpi_device *device = ci->bridge; 384 int busnum = ci->root->secondary.start; 385 struct resource_entry *entry, *tmp; 386 int status; 387 388 status = acpi_pci_probe_root_resources(ci); 389 390 if (pci_use_crs) { 391 resource_list_for_each_entry_safe(entry, tmp, &ci->resources) 392 if (resource_is_pcicfg_ioport(entry->res)) 393 resource_list_destroy_entry(entry); 394 return status; 395 } 396 397 resource_list_for_each_entry_safe(entry, tmp, &ci->resources) { 398 dev_printk(KERN_DEBUG, &device->dev, 399 "host bridge window %pR (ignored)\n", entry->res); 400 resource_list_destroy_entry(entry); 401 } 402 x86_pci_root_bus_resources(busnum, &ci->resources); 403 404 return 0; 405 } 406 407 static struct acpi_pci_root_ops acpi_pci_root_ops = { 408 .pci_ops = &pci_root_ops, 409 .init_info = pci_acpi_root_init_info, 410 .release_info = pci_acpi_root_release_info, 411 .prepare_resources = pci_acpi_root_prepare_resources, 412 }; 413 414 struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) 415 { 416 int domain = root->segment; 417 int busnum = root->secondary.start; 418 int node = pci_acpi_root_get_node(root); 419 struct pci_bus *bus; 420 421 if (pci_ignore_seg) 422 root->segment = domain = 0; 423 424 if (domain && !pci_domains_supported) { 425 pr_warn("pci_bus %04x:%02x: ignored (multiple domains not supported)\n", 426 domain, busnum); 427 return NULL; 428 } 429 430 bus = pci_find_bus(domain, busnum); 431 if (bus) { 432 /* 433 * If the desired bus has been scanned already, replace 434 * its bus->sysdata. 435 */ 436 struct pci_sysdata sd = { 437 .domain = domain, 438 .node = node, 439 .companion = root->device 440 }; 441 442 memcpy(bus->sysdata, &sd, sizeof(sd)); 443 } else { 444 struct pci_root_info *info; 445 446 info = kzalloc(sizeof(*info), GFP_KERNEL); 447 if (!info) 448 dev_err(&root->device->dev, 449 "pci_bus %04x:%02x: ignored (out of memory)\n", 450 domain, busnum); 451 else { 452 info->sd.domain = domain; 453 info->sd.node = node; 454 info->sd.companion = root->device; 455 bus = acpi_pci_root_create(root, &acpi_pci_root_ops, 456 &info->common, &info->sd); 457 } 458 } 459 460 /* After the PCI-E bus has been walked and all devices discovered, 461 * configure any settings of the fabric that might be necessary. 462 */ 463 if (bus) { 464 struct pci_bus *child; 465 list_for_each_entry(child, &bus->children, node) 466 pcie_bus_configure_settings(child); 467 } 468 469 return bus; 470 } 471 472 int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) 473 { 474 /* 475 * We pass NULL as parent to pci_create_root_bus(), so if it is not NULL 476 * here, pci_create_root_bus() has been called by someone else and 477 * sysdata is likely to be different from what we expect. Let it go in 478 * that case. 479 */ 480 if (!bridge->dev.parent) { 481 struct pci_sysdata *sd = bridge->bus->sysdata; 482 ACPI_COMPANION_SET(&bridge->dev, sd->companion); 483 } 484 return 0; 485 } 486 487 int __init pci_acpi_init(void) 488 { 489 struct pci_dev *dev = NULL; 490 491 if (acpi_noirq) 492 return -ENODEV; 493 494 pr_info("Using ACPI for IRQ routing\n"); 495 acpi_irq_penalty_init(); 496 pcibios_enable_irq = acpi_pci_irq_enable; 497 pcibios_disable_irq = acpi_pci_irq_disable; 498 x86_init.pci.init_irq = x86_init_noop; 499 500 if (pci_routeirq) { 501 /* 502 * PCI IRQ routing is set up by pci_enable_device(), but we 503 * also do it here in case there are still broken drivers that 504 * don't use pci_enable_device(). 505 */ 506 pr_info("Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); 507 for_each_pci_dev(dev) 508 acpi_pci_irq_enable(dev); 509 } 510 511 return 0; 512 } 513