xref: /linux/arch/x86/mm/mem_encrypt_boot.S (revision 856e7c4b619af622d56b3b454f7bec32a170ac99)
1/*
2 * AMD Memory Encryption Support
3 *
4 * Copyright (C) 2016 Advanced Micro Devices, Inc.
5 *
6 * Author: Tom Lendacky <thomas.lendacky@amd.com>
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12
13#include <linux/linkage.h>
14#include <asm/pgtable.h>
15#include <asm/page.h>
16#include <asm/processor-flags.h>
17#include <asm/msr-index.h>
18#include <asm/nospec-branch.h>
19
20	.text
21	.code64
22ENTRY(sme_encrypt_execute)
23
24	/*
25	 * Entry parameters:
26	 *   RDI - virtual address for the encrypted mapping
27	 *   RSI - virtual address for the decrypted mapping
28	 *   RDX - length to encrypt
29	 *   RCX - virtual address of the encryption workarea, including:
30	 *     - stack page (PAGE_SIZE)
31	 *     - encryption routine page (PAGE_SIZE)
32	 *     - intermediate copy buffer (PMD_PAGE_SIZE)
33	 *    R8 - physcial address of the pagetables to use for encryption
34	 */
35
36	push	%rbp
37	movq	%rsp, %rbp		/* RBP now has original stack pointer */
38
39	/* Set up a one page stack in the non-encrypted memory area */
40	movq	%rcx, %rax		/* Workarea stack page */
41	leaq	PAGE_SIZE(%rax), %rsp	/* Set new stack pointer */
42	addq	$PAGE_SIZE, %rax	/* Workarea encryption routine */
43
44	push	%r12
45	movq	%rdi, %r10		/* Encrypted area */
46	movq	%rsi, %r11		/* Decrypted area */
47	movq	%rdx, %r12		/* Area length */
48
49	/* Copy encryption routine into the workarea */
50	movq	%rax, %rdi				/* Workarea encryption routine */
51	leaq	__enc_copy(%rip), %rsi			/* Encryption routine */
52	movq	$(.L__enc_copy_end - __enc_copy), %rcx	/* Encryption routine length */
53	rep	movsb
54
55	/* Setup registers for call */
56	movq	%r10, %rdi		/* Encrypted area */
57	movq	%r11, %rsi		/* Decrypted area */
58	movq	%r8, %rdx		/* Pagetables used for encryption */
59	movq	%r12, %rcx		/* Area length */
60	movq	%rax, %r8		/* Workarea encryption routine */
61	addq	$PAGE_SIZE, %r8		/* Workarea intermediate copy buffer */
62
63	ANNOTATE_RETPOLINE_SAFE
64	call	*%rax			/* Call the encryption routine */
65
66	pop	%r12
67
68	movq	%rbp, %rsp		/* Restore original stack pointer */
69	pop	%rbp
70
71	ret
72ENDPROC(sme_encrypt_execute)
73
74ENTRY(__enc_copy)
75/*
76 * Routine used to encrypt memory in place.
77 *   This routine must be run outside of the kernel proper since
78 *   the kernel will be encrypted during the process. So this
79 *   routine is defined here and then copied to an area outside
80 *   of the kernel where it will remain and run decrypted
81 *   during execution.
82 *
83 *   On entry the registers must be:
84 *     RDI - virtual address for the encrypted mapping
85 *     RSI - virtual address for the decrypted mapping
86 *     RDX - address of the pagetables to use for encryption
87 *     RCX - length of area
88 *      R8 - intermediate copy buffer
89 *
90 *     RAX - points to this routine
91 *
92 * The area will be encrypted by copying from the non-encrypted
93 * memory space to an intermediate buffer and then copying from the
94 * intermediate buffer back to the encrypted memory space. The physical
95 * addresses of the two mappings are the same which results in the area
96 * being encrypted "in place".
97 */
98	/* Enable the new page tables */
99	mov	%rdx, %cr3
100
101	/* Flush any global TLBs */
102	mov	%cr4, %rdx
103	andq	$~X86_CR4_PGE, %rdx
104	mov	%rdx, %cr4
105	orq	$X86_CR4_PGE, %rdx
106	mov	%rdx, %cr4
107
108	push	%r15
109	push	%r12
110
111	movq	%rcx, %r9		/* Save area length */
112	movq	%rdi, %r10		/* Save encrypted area address */
113	movq	%rsi, %r11		/* Save decrypted area address */
114
115	/* Set the PAT register PA5 entry to write-protect */
116	movl	$MSR_IA32_CR_PAT, %ecx
117	rdmsr
118	mov	%rdx, %r15		/* Save original PAT value */
119	andl	$0xffff00ff, %edx	/* Clear PA5 */
120	orl	$0x00000500, %edx	/* Set PA5 to WP */
121	wrmsr
122
123	wbinvd				/* Invalidate any cache entries */
124
125	/* Copy/encrypt up to 2MB at a time */
126	movq	$PMD_PAGE_SIZE, %r12
1271:
128	cmpq	%r12, %r9
129	jnb	2f
130	movq	%r9, %r12
131
1322:
133	movq	%r11, %rsi		/* Source - decrypted area */
134	movq	%r8, %rdi		/* Dest   - intermediate copy buffer */
135	movq	%r12, %rcx
136	rep	movsb
137
138	movq	%r8, %rsi		/* Source - intermediate copy buffer */
139	movq	%r10, %rdi		/* Dest   - encrypted area */
140	movq	%r12, %rcx
141	rep	movsb
142
143	addq	%r12, %r11
144	addq	%r12, %r10
145	subq	%r12, %r9		/* Kernel length decrement */
146	jnz	1b			/* Kernel length not zero? */
147
148	/* Restore PAT register */
149	movl	$MSR_IA32_CR_PAT, %ecx
150	rdmsr
151	mov	%r15, %rdx		/* Restore original PAT value */
152	wrmsr
153
154	pop	%r12
155	pop	%r15
156
157	ret
158.L__enc_copy_end:
159ENDPROC(__enc_copy)
160