xref: /linux/arch/x86/mm/cpu_entry_area.c (revision bde5d79d00255db609fe9d859eef8c7b6d38b137)
1 // SPDX-License-Identifier: GPL-2.0
2 
3 #include <linux/spinlock.h>
4 #include <linux/percpu.h>
5 #include <linux/kallsyms.h>
6 #include <linux/kcore.h>
7 #include <linux/pgtable.h>
8 
9 #include <asm/cpu_entry_area.h>
10 #include <asm/fixmap.h>
11 #include <asm/desc.h>
12 #include <asm/kasan.h>
13 #include <asm/setup.h>
14 
15 static DEFINE_PER_CPU_PAGE_ALIGNED(struct entry_stack_page, entry_stack_storage);
16 
17 #ifdef CONFIG_X86_64
18 static DEFINE_PER_CPU_PAGE_ALIGNED(struct exception_stacks, exception_stacks);
19 DEFINE_PER_CPU(struct cea_exception_stacks*, cea_exception_stacks);
20 
21 static DEFINE_PER_CPU_READ_MOSTLY(unsigned long, _cea_offset);
22 
23 static __always_inline unsigned int cea_offset(unsigned int cpu)
24 {
25 	return per_cpu(_cea_offset, cpu);
26 }
27 
28 static __init void init_cea_offsets(void)
29 {
30 	unsigned int max_cea;
31 	unsigned int i, j;
32 
33 	if (!kaslr_enabled()) {
34 		for_each_possible_cpu(i)
35 			per_cpu(_cea_offset, i) = i;
36 		return;
37 	}
38 
39 	max_cea = (CPU_ENTRY_AREA_MAP_SIZE - PAGE_SIZE) / CPU_ENTRY_AREA_SIZE;
40 
41 	/* O(sodding terrible) */
42 	for_each_possible_cpu(i) {
43 		unsigned int cea;
44 
45 again:
46 		cea = get_random_u32_below(max_cea);
47 
48 		for_each_possible_cpu(j) {
49 			if (cea_offset(j) == cea)
50 				goto again;
51 
52 			if (i == j)
53 				break;
54 		}
55 
56 		per_cpu(_cea_offset, i) = cea;
57 	}
58 }
59 #else /* !X86_64 */
60 DECLARE_PER_CPU_PAGE_ALIGNED(struct doublefault_stack, doublefault_stack);
61 
62 static __always_inline unsigned int cea_offset(unsigned int cpu)
63 {
64 	return cpu;
65 }
66 static inline void init_cea_offsets(void) { }
67 #endif
68 
69 /* Is called from entry code, so must be noinstr */
70 noinstr struct cpu_entry_area *get_cpu_entry_area(int cpu)
71 {
72 	unsigned long va = CPU_ENTRY_AREA_PER_CPU + cea_offset(cpu) * CPU_ENTRY_AREA_SIZE;
73 	BUILD_BUG_ON(sizeof(struct cpu_entry_area) % PAGE_SIZE != 0);
74 
75 	return (struct cpu_entry_area *) va;
76 }
77 EXPORT_SYMBOL(get_cpu_entry_area);
78 
79 void cea_set_pte(void *cea_vaddr, phys_addr_t pa, pgprot_t flags)
80 {
81 	unsigned long va = (unsigned long) cea_vaddr;
82 	pte_t pte = pfn_pte(pa >> PAGE_SHIFT, flags);
83 
84 	/*
85 	 * The cpu_entry_area is shared between the user and kernel
86 	 * page tables.  All of its ptes can safely be global.
87 	 * _PAGE_GLOBAL gets reused to help indicate PROT_NONE for
88 	 * non-present PTEs, so be careful not to set it in that
89 	 * case to avoid confusion.
90 	 */
91 	if (boot_cpu_has(X86_FEATURE_PGE) &&
92 	    (pgprot_val(flags) & _PAGE_PRESENT))
93 		pte = pte_set_flags(pte, _PAGE_GLOBAL);
94 
95 	set_pte_vaddr(va, pte);
96 }
97 
98 static void __init
99 cea_map_percpu_pages(void *cea_vaddr, void *ptr, int pages, pgprot_t prot)
100 {
101 	for ( ; pages; pages--, cea_vaddr+= PAGE_SIZE, ptr += PAGE_SIZE)
102 		cea_set_pte(cea_vaddr, per_cpu_ptr_to_phys(ptr), prot);
103 }
104 
105 static void __init percpu_setup_debug_store(unsigned int cpu)
106 {
107 #ifdef CONFIG_CPU_SUP_INTEL
108 	unsigned int npages;
109 	void *cea;
110 
111 	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
112 		return;
113 
114 	cea = &get_cpu_entry_area(cpu)->cpu_debug_store;
115 	npages = sizeof(struct debug_store) / PAGE_SIZE;
116 	BUILD_BUG_ON(sizeof(struct debug_store) % PAGE_SIZE != 0);
117 	cea_map_percpu_pages(cea, &per_cpu(cpu_debug_store, cpu), npages,
118 			     PAGE_KERNEL);
119 
120 	cea = &get_cpu_entry_area(cpu)->cpu_debug_buffers;
121 	/*
122 	 * Force the population of PMDs for not yet allocated per cpu
123 	 * memory like debug store buffers.
124 	 */
125 	npages = sizeof(struct debug_store_buffers) / PAGE_SIZE;
126 	for (; npages; npages--, cea += PAGE_SIZE)
127 		cea_set_pte(cea, 0, PAGE_NONE);
128 #endif
129 }
130 
131 #ifdef CONFIG_X86_64
132 
133 #define cea_map_stack(name) do {					\
134 	npages = sizeof(estacks->name## _stack) / PAGE_SIZE;		\
135 	cea_map_percpu_pages(cea->estacks.name## _stack,		\
136 			estacks->name## _stack, npages, PAGE_KERNEL);	\
137 	} while (0)
138 
139 static void __init percpu_setup_exception_stacks(unsigned int cpu)
140 {
141 	struct exception_stacks *estacks = per_cpu_ptr(&exception_stacks, cpu);
142 	struct cpu_entry_area *cea = get_cpu_entry_area(cpu);
143 	unsigned int npages;
144 
145 	BUILD_BUG_ON(sizeof(exception_stacks) % PAGE_SIZE != 0);
146 
147 	per_cpu(cea_exception_stacks, cpu) = &cea->estacks;
148 
149 	/*
150 	 * The exceptions stack mappings in the per cpu area are protected
151 	 * by guard pages so each stack must be mapped separately. DB2 is
152 	 * not mapped; it just exists to catch triple nesting of #DB.
153 	 */
154 	cea_map_stack(DF);
155 	cea_map_stack(NMI);
156 	cea_map_stack(DB);
157 	cea_map_stack(MCE);
158 
159 	if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) {
160 		if (cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT)) {
161 			cea_map_stack(VC);
162 			cea_map_stack(VC2);
163 		}
164 	}
165 }
166 #else
167 static void __init percpu_setup_exception_stacks(unsigned int cpu)
168 {
169 	struct cpu_entry_area *cea = get_cpu_entry_area(cpu);
170 
171 	cea_map_percpu_pages(&cea->doublefault_stack,
172 			     &per_cpu(doublefault_stack, cpu), 1, PAGE_KERNEL);
173 }
174 #endif
175 
176 /* Setup the fixmap mappings only once per-processor */
177 static void __init setup_cpu_entry_area(unsigned int cpu)
178 {
179 	struct cpu_entry_area *cea = get_cpu_entry_area(cpu);
180 #ifdef CONFIG_X86_64
181 	/* On 64-bit systems, we use a read-only fixmap GDT and TSS. */
182 	pgprot_t gdt_prot = PAGE_KERNEL_RO;
183 	pgprot_t tss_prot = PAGE_KERNEL_RO;
184 #else
185 	/*
186 	 * On 32-bit systems, the GDT cannot be read-only because
187 	 * our double fault handler uses a task gate, and entering through
188 	 * a task gate needs to change an available TSS to busy.  If the
189 	 * GDT is read-only, that will triple fault.  The TSS cannot be
190 	 * read-only because the CPU writes to it on task switches.
191 	 */
192 	pgprot_t gdt_prot = PAGE_KERNEL;
193 	pgprot_t tss_prot = PAGE_KERNEL;
194 #endif
195 
196 	kasan_populate_shadow_for_vaddr(cea, CPU_ENTRY_AREA_SIZE,
197 					early_cpu_to_node(cpu));
198 
199 	cea_set_pte(&cea->gdt, get_cpu_gdt_paddr(cpu), gdt_prot);
200 
201 	cea_map_percpu_pages(&cea->entry_stack_page,
202 			     per_cpu_ptr(&entry_stack_storage, cpu), 1,
203 			     PAGE_KERNEL);
204 
205 	/*
206 	 * The Intel SDM says (Volume 3, 7.2.1):
207 	 *
208 	 *  Avoid placing a page boundary in the part of the TSS that the
209 	 *  processor reads during a task switch (the first 104 bytes). The
210 	 *  processor may not correctly perform address translations if a
211 	 *  boundary occurs in this area. During a task switch, the processor
212 	 *  reads and writes into the first 104 bytes of each TSS (using
213 	 *  contiguous physical addresses beginning with the physical address
214 	 *  of the first byte of the TSS). So, after TSS access begins, if
215 	 *  part of the 104 bytes is not physically contiguous, the processor
216 	 *  will access incorrect information without generating a page-fault
217 	 *  exception.
218 	 *
219 	 * There are also a lot of errata involving the TSS spanning a page
220 	 * boundary.  Assert that we're not doing that.
221 	 */
222 	BUILD_BUG_ON((offsetof(struct tss_struct, x86_tss) ^
223 		      offsetofend(struct tss_struct, x86_tss)) & PAGE_MASK);
224 	BUILD_BUG_ON(sizeof(struct tss_struct) % PAGE_SIZE != 0);
225 	/*
226 	 * VMX changes the host TR limit to 0x67 after a VM exit. This is
227 	 * okay, since 0x67 covers the size of struct x86_hw_tss. Make sure
228 	 * that this is correct.
229 	 */
230 	BUILD_BUG_ON(offsetof(struct tss_struct, x86_tss) != 0);
231 	BUILD_BUG_ON(sizeof(struct x86_hw_tss) != 0x68);
232 
233 	cea_map_percpu_pages(&cea->tss, &per_cpu(cpu_tss_rw, cpu),
234 			     sizeof(struct tss_struct) / PAGE_SIZE, tss_prot);
235 
236 #ifdef CONFIG_X86_32
237 	per_cpu(cpu_entry_area, cpu) = cea;
238 #endif
239 
240 	percpu_setup_exception_stacks(cpu);
241 
242 	percpu_setup_debug_store(cpu);
243 }
244 
245 static __init void setup_cpu_entry_area_ptes(void)
246 {
247 #ifdef CONFIG_X86_32
248 	unsigned long start, end;
249 
250 	/* The +1 is for the readonly IDT: */
251 	BUILD_BUG_ON((CPU_ENTRY_AREA_PAGES+1)*PAGE_SIZE != CPU_ENTRY_AREA_MAP_SIZE);
252 	BUG_ON(CPU_ENTRY_AREA_BASE & ~PMD_MASK);
253 
254 	start = CPU_ENTRY_AREA_BASE;
255 	end = start + CPU_ENTRY_AREA_MAP_SIZE;
256 
257 	/* Careful here: start + PMD_SIZE might wrap around */
258 	for (; start < end && start >= CPU_ENTRY_AREA_BASE; start += PMD_SIZE)
259 		populate_extra_pte(start);
260 #endif
261 }
262 
263 void __init setup_cpu_entry_areas(void)
264 {
265 	unsigned int cpu;
266 
267 	init_cea_offsets();
268 
269 	setup_cpu_entry_area_ptes();
270 
271 	for_each_possible_cpu(cpu)
272 		setup_cpu_entry_area(cpu);
273 
274 	/*
275 	 * This is the last essential update to swapper_pgdir which needs
276 	 * to be synchronized to initial_page_table on 32bit.
277 	 */
278 	sync_initial_page_table();
279 }
280