1 /* 2 * This file contains work-arounds for x86 and x86_64 platform bugs. 3 */ 4 #include <linux/pci.h> 5 #include <linux/irq.h> 6 7 #include <asm/hpet.h> 8 9 #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_SMP) && defined(CONFIG_PCI) 10 11 static void quirk_intel_irqbalance(struct pci_dev *dev) 12 { 13 u8 config; 14 u16 word; 15 16 /* BIOS may enable hardware IRQ balancing for 17 * E7520/E7320/E7525(revision ID 0x9 and below) 18 * based platforms. 19 * Disable SW irqbalance/affinity on those platforms. 20 */ 21 if (dev->revision > 0x9) 22 return; 23 24 /* enable access to config space*/ 25 pci_read_config_byte(dev, 0xf4, &config); 26 pci_write_config_byte(dev, 0xf4, config|0x2); 27 28 /* 29 * read xTPR register. We may not have a pci_dev for device 8 30 * because it might be hidden until the above write. 31 */ 32 pci_bus_read_config_word(dev->bus, PCI_DEVFN(8, 0), 0x4c, &word); 33 34 if (!(word & (1 << 13))) { 35 dev_info(&dev->dev, "Intel E7520/7320/7525 detected; " 36 "disabling irq balancing and affinity\n"); 37 noirqdebug_setup(""); 38 #ifdef CONFIG_PROC_FS 39 no_irq_affinity = 1; 40 #endif 41 } 42 43 /* put back the original value for config space*/ 44 if (!(config & 0x2)) 45 pci_write_config_byte(dev, 0xf4, config); 46 } 47 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, 48 quirk_intel_irqbalance); 49 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, 50 quirk_intel_irqbalance); 51 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, 52 quirk_intel_irqbalance); 53 #endif 54 55 #if defined(CONFIG_HPET_TIMER) 56 unsigned long force_hpet_address; 57 58 static enum { 59 NONE_FORCE_HPET_RESUME, 60 OLD_ICH_FORCE_HPET_RESUME, 61 ICH_FORCE_HPET_RESUME, 62 VT8237_FORCE_HPET_RESUME, 63 NVIDIA_FORCE_HPET_RESUME, 64 ATI_FORCE_HPET_RESUME, 65 } force_hpet_resume_type; 66 67 static void __iomem *rcba_base; 68 69 static void ich_force_hpet_resume(void) 70 { 71 u32 val; 72 73 if (!force_hpet_address) 74 return; 75 76 BUG_ON(rcba_base == NULL); 77 78 /* read the Function Disable register, dword mode only */ 79 val = readl(rcba_base + 0x3404); 80 if (!(val & 0x80)) { 81 /* HPET disabled in HPTC. Trying to enable */ 82 writel(val | 0x80, rcba_base + 0x3404); 83 } 84 85 val = readl(rcba_base + 0x3404); 86 if (!(val & 0x80)) 87 BUG(); 88 else 89 printk(KERN_DEBUG "Force enabled HPET at resume\n"); 90 91 return; 92 } 93 94 static void ich_force_enable_hpet(struct pci_dev *dev) 95 { 96 u32 val; 97 u32 uninitialized_var(rcba); 98 int err = 0; 99 100 if (hpet_address || force_hpet_address) 101 return; 102 103 pci_read_config_dword(dev, 0xF0, &rcba); 104 rcba &= 0xFFFFC000; 105 if (rcba == 0) { 106 dev_printk(KERN_DEBUG, &dev->dev, "RCBA disabled; " 107 "cannot force enable HPET\n"); 108 return; 109 } 110 111 /* use bits 31:14, 16 kB aligned */ 112 rcba_base = ioremap_nocache(rcba, 0x4000); 113 if (rcba_base == NULL) { 114 dev_printk(KERN_DEBUG, &dev->dev, "ioremap failed; " 115 "cannot force enable HPET\n"); 116 return; 117 } 118 119 /* read the Function Disable register, dword mode only */ 120 val = readl(rcba_base + 0x3404); 121 122 if (val & 0x80) { 123 /* HPET is enabled in HPTC. Just not reported by BIOS */ 124 val = val & 0x3; 125 force_hpet_address = 0xFED00000 | (val << 12); 126 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " 127 "0x%lx\n", force_hpet_address); 128 iounmap(rcba_base); 129 return; 130 } 131 132 /* HPET disabled in HPTC. Trying to enable */ 133 writel(val | 0x80, rcba_base + 0x3404); 134 135 val = readl(rcba_base + 0x3404); 136 if (!(val & 0x80)) { 137 err = 1; 138 } else { 139 val = val & 0x3; 140 force_hpet_address = 0xFED00000 | (val << 12); 141 } 142 143 if (err) { 144 force_hpet_address = 0; 145 iounmap(rcba_base); 146 dev_printk(KERN_DEBUG, &dev->dev, 147 "Failed to force enable HPET\n"); 148 } else { 149 force_hpet_resume_type = ICH_FORCE_HPET_RESUME; 150 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " 151 "0x%lx\n", force_hpet_address); 152 } 153 } 154 155 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, 156 ich_force_enable_hpet); 157 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, 158 ich_force_enable_hpet); 159 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, 160 ich_force_enable_hpet); 161 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, 162 ich_force_enable_hpet); 163 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, 164 ich_force_enable_hpet); 165 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, 166 ich_force_enable_hpet); 167 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, 168 ich_force_enable_hpet); 169 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, 170 ich_force_enable_hpet); 171 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, 172 ich_force_enable_hpet); 173 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x3a16, /* ICH10 */ 174 ich_force_enable_hpet); 175 176 static struct pci_dev *cached_dev; 177 178 static void hpet_print_force_info(void) 179 { 180 printk(KERN_INFO "HPET not enabled in BIOS. " 181 "You might try hpet=force boot option\n"); 182 } 183 184 static void old_ich_force_hpet_resume(void) 185 { 186 u32 val; 187 u32 uninitialized_var(gen_cntl); 188 189 if (!force_hpet_address || !cached_dev) 190 return; 191 192 pci_read_config_dword(cached_dev, 0xD0, &gen_cntl); 193 gen_cntl &= (~(0x7 << 15)); 194 gen_cntl |= (0x4 << 15); 195 196 pci_write_config_dword(cached_dev, 0xD0, gen_cntl); 197 pci_read_config_dword(cached_dev, 0xD0, &gen_cntl); 198 val = gen_cntl >> 15; 199 val &= 0x7; 200 if (val == 0x4) 201 printk(KERN_DEBUG "Force enabled HPET at resume\n"); 202 else 203 BUG(); 204 } 205 206 static void old_ich_force_enable_hpet(struct pci_dev *dev) 207 { 208 u32 val; 209 u32 uninitialized_var(gen_cntl); 210 211 if (hpet_address || force_hpet_address) 212 return; 213 214 pci_read_config_dword(dev, 0xD0, &gen_cntl); 215 /* 216 * Bit 17 is HPET enable bit. 217 * Bit 16:15 control the HPET base address. 218 */ 219 val = gen_cntl >> 15; 220 val &= 0x7; 221 if (val & 0x4) { 222 val &= 0x3; 223 force_hpet_address = 0xFED00000 | (val << 12); 224 dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n", 225 force_hpet_address); 226 return; 227 } 228 229 /* 230 * HPET is disabled. Trying enabling at FED00000 and check 231 * whether it sticks 232 */ 233 gen_cntl &= (~(0x7 << 15)); 234 gen_cntl |= (0x4 << 15); 235 pci_write_config_dword(dev, 0xD0, gen_cntl); 236 237 pci_read_config_dword(dev, 0xD0, &gen_cntl); 238 239 val = gen_cntl >> 15; 240 val &= 0x7; 241 if (val & 0x4) { 242 /* HPET is enabled in HPTC. Just not reported by BIOS */ 243 val &= 0x3; 244 force_hpet_address = 0xFED00000 | (val << 12); 245 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " 246 "0x%lx\n", force_hpet_address); 247 cached_dev = dev; 248 force_hpet_resume_type = OLD_ICH_FORCE_HPET_RESUME; 249 return; 250 } 251 252 dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n"); 253 } 254 255 /* 256 * Undocumented chipset features. Make sure that the user enforced 257 * this. 258 */ 259 static void old_ich_force_enable_hpet_user(struct pci_dev *dev) 260 { 261 if (hpet_force_user) 262 old_ich_force_enable_hpet(dev); 263 } 264 265 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, 266 old_ich_force_enable_hpet_user); 267 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, 268 old_ich_force_enable_hpet_user); 269 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, 270 old_ich_force_enable_hpet_user); 271 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, 272 old_ich_force_enable_hpet_user); 273 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, 274 old_ich_force_enable_hpet_user); 275 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, 276 old_ich_force_enable_hpet); 277 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_12, 278 old_ich_force_enable_hpet); 279 280 281 static void vt8237_force_hpet_resume(void) 282 { 283 u32 val; 284 285 if (!force_hpet_address || !cached_dev) 286 return; 287 288 val = 0xfed00000 | 0x80; 289 pci_write_config_dword(cached_dev, 0x68, val); 290 291 pci_read_config_dword(cached_dev, 0x68, &val); 292 if (val & 0x80) 293 printk(KERN_DEBUG "Force enabled HPET at resume\n"); 294 else 295 BUG(); 296 } 297 298 static void vt8237_force_enable_hpet(struct pci_dev *dev) 299 { 300 u32 uninitialized_var(val); 301 302 if (hpet_address || force_hpet_address) 303 return; 304 305 if (!hpet_force_user) { 306 hpet_print_force_info(); 307 return; 308 } 309 310 pci_read_config_dword(dev, 0x68, &val); 311 /* 312 * Bit 7 is HPET enable bit. 313 * Bit 31:10 is HPET base address (contrary to what datasheet claims) 314 */ 315 if (val & 0x80) { 316 force_hpet_address = (val & ~0x3ff); 317 dev_printk(KERN_DEBUG, &dev->dev, "HPET at 0x%lx\n", 318 force_hpet_address); 319 return; 320 } 321 322 /* 323 * HPET is disabled. Trying enabling at FED00000 and check 324 * whether it sticks 325 */ 326 val = 0xfed00000 | 0x80; 327 pci_write_config_dword(dev, 0x68, val); 328 329 pci_read_config_dword(dev, 0x68, &val); 330 if (val & 0x80) { 331 force_hpet_address = (val & ~0x3ff); 332 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " 333 "0x%lx\n", force_hpet_address); 334 cached_dev = dev; 335 force_hpet_resume_type = VT8237_FORCE_HPET_RESUME; 336 return; 337 } 338 339 dev_printk(KERN_DEBUG, &dev->dev, "Failed to force enable HPET\n"); 340 } 341 342 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, 343 vt8237_force_enable_hpet); 344 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, 345 vt8237_force_enable_hpet); 346 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700, 347 vt8237_force_enable_hpet); 348 349 static void ati_force_hpet_resume(void) 350 { 351 pci_write_config_dword(cached_dev, 0x14, 0xfed00000); 352 printk(KERN_DEBUG "Force enabled HPET at resume\n"); 353 } 354 355 static u32 ati_ixp4x0_rev(struct pci_dev *dev) 356 { 357 int err = 0; 358 u32 d = 0; 359 u8 b = 0; 360 361 err = pci_read_config_byte(dev, 0xac, &b); 362 b &= ~(1<<5); 363 err |= pci_write_config_byte(dev, 0xac, b); 364 err |= pci_read_config_dword(dev, 0x70, &d); 365 d |= 1<<8; 366 err |= pci_write_config_dword(dev, 0x70, d); 367 err |= pci_read_config_dword(dev, 0x8, &d); 368 d &= 0xff; 369 dev_printk(KERN_DEBUG, &dev->dev, "SB4X0 revision 0x%x\n", d); 370 371 WARN_ON_ONCE(err); 372 373 return d; 374 } 375 376 static void ati_force_enable_hpet(struct pci_dev *dev) 377 { 378 u32 d, val; 379 u8 b; 380 381 if (hpet_address || force_hpet_address) 382 return; 383 384 if (!hpet_force_user) { 385 hpet_print_force_info(); 386 return; 387 } 388 389 d = ati_ixp4x0_rev(dev); 390 if (d < 0x82) 391 return; 392 393 /* base address */ 394 pci_write_config_dword(dev, 0x14, 0xfed00000); 395 pci_read_config_dword(dev, 0x14, &val); 396 397 /* enable interrupt */ 398 outb(0x72, 0xcd6); b = inb(0xcd7); 399 b |= 0x1; 400 outb(0x72, 0xcd6); outb(b, 0xcd7); 401 outb(0x72, 0xcd6); b = inb(0xcd7); 402 if (!(b & 0x1)) 403 return; 404 pci_read_config_dword(dev, 0x64, &d); 405 d |= (1<<10); 406 pci_write_config_dword(dev, 0x64, d); 407 pci_read_config_dword(dev, 0x64, &d); 408 if (!(d & (1<<10))) 409 return; 410 411 force_hpet_address = val; 412 force_hpet_resume_type = ATI_FORCE_HPET_RESUME; 413 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", 414 force_hpet_address); 415 cached_dev = dev; 416 } 417 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS, 418 ati_force_enable_hpet); 419 420 /* 421 * Undocumented chipset feature taken from LinuxBIOS. 422 */ 423 static void nvidia_force_hpet_resume(void) 424 { 425 pci_write_config_dword(cached_dev, 0x44, 0xfed00001); 426 printk(KERN_DEBUG "Force enabled HPET at resume\n"); 427 } 428 429 static void nvidia_force_enable_hpet(struct pci_dev *dev) 430 { 431 u32 uninitialized_var(val); 432 433 if (hpet_address || force_hpet_address) 434 return; 435 436 if (!hpet_force_user) { 437 hpet_print_force_info(); 438 return; 439 } 440 441 pci_write_config_dword(dev, 0x44, 0xfed00001); 442 pci_read_config_dword(dev, 0x44, &val); 443 force_hpet_address = val & 0xfffffffe; 444 force_hpet_resume_type = NVIDIA_FORCE_HPET_RESUME; 445 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at 0x%lx\n", 446 force_hpet_address); 447 cached_dev = dev; 448 return; 449 } 450 451 /* ISA Bridges */ 452 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0050, 453 nvidia_force_enable_hpet); 454 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051, 455 nvidia_force_enable_hpet); 456 457 /* LPC bridges */ 458 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260, 459 nvidia_force_enable_hpet); 460 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360, 461 nvidia_force_enable_hpet); 462 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361, 463 nvidia_force_enable_hpet); 464 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0362, 465 nvidia_force_enable_hpet); 466 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0363, 467 nvidia_force_enable_hpet); 468 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0364, 469 nvidia_force_enable_hpet); 470 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0365, 471 nvidia_force_enable_hpet); 472 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0366, 473 nvidia_force_enable_hpet); 474 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0367, 475 nvidia_force_enable_hpet); 476 477 void force_hpet_resume(void) 478 { 479 switch (force_hpet_resume_type) { 480 case ICH_FORCE_HPET_RESUME: 481 ich_force_hpet_resume(); 482 return; 483 case OLD_ICH_FORCE_HPET_RESUME: 484 old_ich_force_hpet_resume(); 485 return; 486 case VT8237_FORCE_HPET_RESUME: 487 vt8237_force_hpet_resume(); 488 return; 489 case NVIDIA_FORCE_HPET_RESUME: 490 nvidia_force_hpet_resume(); 491 return; 492 case ATI_FORCE_HPET_RESUME: 493 ati_force_hpet_resume(); 494 return; 495 default: 496 break; 497 } 498 } 499 500 /* 501 * According to the datasheet e6xx systems have the HPET hardwired to 502 * 0xfed00000 503 */ 504 static void e6xx_force_enable_hpet(struct pci_dev *dev) 505 { 506 if (hpet_address || force_hpet_address) 507 return; 508 509 force_hpet_address = 0xFED00000; 510 force_hpet_resume_type = NONE_FORCE_HPET_RESUME; 511 dev_printk(KERN_DEBUG, &dev->dev, "Force enabled HPET at " 512 "0x%lx\n", force_hpet_address); 513 return; 514 } 515 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E6XX_CU, 516 e6xx_force_enable_hpet); 517 518 /* 519 * HPET MSI on some boards (ATI SB700/SB800) has side effect on 520 * floppy DMA. Disable HPET MSI on such platforms. 521 * See erratum #27 (Misinterpreted MSI Requests May Result in 522 * Corrupted LPC DMA Data) in AMD Publication #46837, 523 * "SB700 Family Product Errata", Rev. 1.0, March 2010. 524 */ 525 static void force_disable_hpet_msi(struct pci_dev *unused) 526 { 527 hpet_msi_disable = 1; 528 } 529 530 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, 531 force_disable_hpet_msi); 532 533 #endif 534 535 #if defined(CONFIG_PCI) && defined(CONFIG_NUMA) 536 /* Set correct numa_node information for AMD NB functions */ 537 static void quirk_amd_nb_node(struct pci_dev *dev) 538 { 539 struct pci_dev *nb_ht; 540 unsigned int devfn; 541 u32 node; 542 u32 val; 543 544 devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); 545 nb_ht = pci_get_slot(dev->bus, devfn); 546 if (!nb_ht) 547 return; 548 549 pci_read_config_dword(nb_ht, 0x60, &val); 550 node = pcibus_to_node(dev->bus) | (val & 7); 551 /* 552 * Some hardware may return an invalid node ID, 553 * so check it first: 554 */ 555 if (node_online(node)) 556 set_dev_node(&dev->dev, node); 557 pci_dev_put(nb_ht); 558 } 559 560 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB, 561 quirk_amd_nb_node); 562 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP, 563 quirk_amd_nb_node); 564 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL, 565 quirk_amd_nb_node); 566 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC, 567 quirk_amd_nb_node); 568 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_HT, 569 quirk_amd_nb_node); 570 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MAP, 571 quirk_amd_nb_node); 572 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM, 573 quirk_amd_nb_node); 574 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC, 575 quirk_amd_nb_node); 576 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK, 577 quirk_amd_nb_node); 578 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F0, 579 quirk_amd_nb_node); 580 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F1, 581 quirk_amd_nb_node); 582 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F2, 583 quirk_amd_nb_node); 584 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3, 585 quirk_amd_nb_node); 586 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4, 587 quirk_amd_nb_node); 588 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F5, 589 quirk_amd_nb_node); 590 591 #endif 592 593 #ifdef CONFIG_PCI 594 /* 595 * Processor does not ensure DRAM scrub read/write sequence 596 * is atomic wrt accesses to CC6 save state area. Therefore 597 * if a concurrent scrub read/write access is to same address 598 * the entry may appear as if it is not written. This quirk 599 * applies to Fam16h models 00h-0Fh 600 * 601 * See "Revision Guide" for AMD F16h models 00h-0fh, 602 * document 51810 rev. 3.04, Nov 2013 603 */ 604 static void amd_disable_seq_and_redirect_scrub(struct pci_dev *dev) 605 { 606 u32 val; 607 608 /* 609 * Suggested workaround: 610 * set D18F3x58[4:0] = 00h and set D18F3x5C[0] = 0b 611 */ 612 pci_read_config_dword(dev, 0x58, &val); 613 if (val & 0x1F) { 614 val &= ~(0x1F); 615 pci_write_config_dword(dev, 0x58, val); 616 } 617 618 pci_read_config_dword(dev, 0x5C, &val); 619 if (val & BIT(0)) { 620 val &= ~BIT(0); 621 pci_write_config_dword(dev, 0x5c, val); 622 } 623 } 624 625 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3, 626 amd_disable_seq_and_redirect_scrub); 627 628 #endif 629