1 /* 2 * Intel Multiprocessor Specification 1.1 and 1.4 3 * compliant MP-table parsing routines. 4 * 5 * (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk> 6 * (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com> 7 * (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de> 8 */ 9 10 #include <linux/mm.h> 11 #include <linux/init.h> 12 #include <linux/delay.h> 13 #include <linux/bootmem.h> 14 #include <linux/memblock.h> 15 #include <linux/kernel_stat.h> 16 #include <linux/mc146818rtc.h> 17 #include <linux/bitops.h> 18 #include <linux/acpi.h> 19 #include <linux/smp.h> 20 #include <linux/pci.h> 21 22 #include <asm/irqdomain.h> 23 #include <asm/mtrr.h> 24 #include <asm/mpspec.h> 25 #include <asm/pgalloc.h> 26 #include <asm/io_apic.h> 27 #include <asm/proto.h> 28 #include <asm/bios_ebda.h> 29 #include <asm/e820/api.h> 30 #include <asm/setup.h> 31 #include <asm/smp.h> 32 33 #include <asm/apic.h> 34 /* 35 * Checksum an MP configuration block. 36 */ 37 38 static int __init mpf_checksum(unsigned char *mp, int len) 39 { 40 int sum = 0; 41 42 while (len--) 43 sum += *mp++; 44 45 return sum & 0xFF; 46 } 47 48 int __init default_mpc_apic_id(struct mpc_cpu *m) 49 { 50 return m->apicid; 51 } 52 53 static void __init MP_processor_info(struct mpc_cpu *m) 54 { 55 int apicid; 56 char *bootup_cpu = ""; 57 58 if (!(m->cpuflag & CPU_ENABLED)) { 59 disabled_cpus++; 60 return; 61 } 62 63 apicid = x86_init.mpparse.mpc_apic_id(m); 64 65 if (m->cpuflag & CPU_BOOTPROCESSOR) { 66 bootup_cpu = " (Bootup-CPU)"; 67 boot_cpu_physical_apicid = m->apicid; 68 } 69 70 pr_info("Processor #%d%s\n", m->apicid, bootup_cpu); 71 generic_processor_info(apicid, m->apicver); 72 } 73 74 #ifdef CONFIG_X86_IO_APIC 75 void __init default_mpc_oem_bus_info(struct mpc_bus *m, char *str) 76 { 77 memcpy(str, m->bustype, 6); 78 str[6] = 0; 79 apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str); 80 } 81 82 static void __init MP_bus_info(struct mpc_bus *m) 83 { 84 char str[7]; 85 86 x86_init.mpparse.mpc_oem_bus_info(m, str); 87 88 #if MAX_MP_BUSSES < 256 89 if (m->busid >= MAX_MP_BUSSES) { 90 pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n", 91 m->busid, str, MAX_MP_BUSSES - 1); 92 return; 93 } 94 #endif 95 96 set_bit(m->busid, mp_bus_not_pci); 97 if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) { 98 #ifdef CONFIG_EISA 99 mp_bus_id_to_type[m->busid] = MP_BUS_ISA; 100 #endif 101 } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) { 102 if (x86_init.mpparse.mpc_oem_pci_bus) 103 x86_init.mpparse.mpc_oem_pci_bus(m); 104 105 clear_bit(m->busid, mp_bus_not_pci); 106 #ifdef CONFIG_EISA 107 mp_bus_id_to_type[m->busid] = MP_BUS_PCI; 108 } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) { 109 mp_bus_id_to_type[m->busid] = MP_BUS_EISA; 110 #endif 111 } else 112 pr_warn("Unknown bustype %s - ignoring\n", str); 113 } 114 115 static void __init MP_ioapic_info(struct mpc_ioapic *m) 116 { 117 struct ioapic_domain_cfg cfg = { 118 .type = IOAPIC_DOMAIN_LEGACY, 119 .ops = &mp_ioapic_irqdomain_ops, 120 }; 121 122 if (m->flags & MPC_APIC_USABLE) 123 mp_register_ioapic(m->apicid, m->apicaddr, gsi_top, &cfg); 124 } 125 126 static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq) 127 { 128 apic_printk(APIC_VERBOSE, 129 "Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n", 130 mp_irq->irqtype, mp_irq->irqflag & 3, 131 (mp_irq->irqflag >> 2) & 3, mp_irq->srcbus, 132 mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq); 133 } 134 135 #else /* CONFIG_X86_IO_APIC */ 136 static inline void __init MP_bus_info(struct mpc_bus *m) {} 137 static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {} 138 #endif /* CONFIG_X86_IO_APIC */ 139 140 static void __init MP_lintsrc_info(struct mpc_lintsrc *m) 141 { 142 apic_printk(APIC_VERBOSE, 143 "Lint: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC LINT %02x\n", 144 m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbusid, 145 m->srcbusirq, m->destapic, m->destapiclint); 146 } 147 148 /* 149 * Read/parse the MPC 150 */ 151 static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str) 152 { 153 154 if (memcmp(mpc->signature, MPC_SIGNATURE, 4)) { 155 pr_err("MPTABLE: bad signature [%c%c%c%c]!\n", 156 mpc->signature[0], mpc->signature[1], 157 mpc->signature[2], mpc->signature[3]); 158 return 0; 159 } 160 if (mpf_checksum((unsigned char *)mpc, mpc->length)) { 161 pr_err("MPTABLE: checksum error!\n"); 162 return 0; 163 } 164 if (mpc->spec != 0x01 && mpc->spec != 0x04) { 165 pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec); 166 return 0; 167 } 168 if (!mpc->lapic) { 169 pr_err("MPTABLE: null local APIC address!\n"); 170 return 0; 171 } 172 memcpy(oem, mpc->oem, 8); 173 oem[8] = 0; 174 pr_info("MPTABLE: OEM ID: %s\n", oem); 175 176 memcpy(str, mpc->productid, 12); 177 str[12] = 0; 178 179 pr_info("MPTABLE: Product ID: %s\n", str); 180 181 pr_info("MPTABLE: APIC at: 0x%X\n", mpc->lapic); 182 183 return 1; 184 } 185 186 static void skip_entry(unsigned char **ptr, int *count, int size) 187 { 188 *ptr += size; 189 *count += size; 190 } 191 192 static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt) 193 { 194 pr_err("Your mptable is wrong, contact your HW vendor!\n"); 195 pr_cont("type %x\n", *mpt); 196 print_hex_dump(KERN_ERR, " ", DUMP_PREFIX_ADDRESS, 16, 197 1, mpc, mpc->length, 1); 198 } 199 200 void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { } 201 202 static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early) 203 { 204 char str[16]; 205 char oem[10]; 206 207 int count = sizeof(*mpc); 208 unsigned char *mpt = ((unsigned char *)mpc) + count; 209 210 if (!smp_check_mpc(mpc, oem, str)) 211 return 0; 212 213 /* Initialize the lapic mapping */ 214 if (!acpi_lapic) 215 register_lapic_address(mpc->lapic); 216 217 if (early) 218 return 1; 219 220 if (mpc->oemptr) 221 x86_init.mpparse.smp_read_mpc_oem(mpc); 222 223 /* 224 * Now process the configuration blocks. 225 */ 226 x86_init.mpparse.mpc_record(0); 227 228 while (count < mpc->length) { 229 switch (*mpt) { 230 case MP_PROCESSOR: 231 /* ACPI may have already provided this data */ 232 if (!acpi_lapic) 233 MP_processor_info((struct mpc_cpu *)mpt); 234 skip_entry(&mpt, &count, sizeof(struct mpc_cpu)); 235 break; 236 case MP_BUS: 237 MP_bus_info((struct mpc_bus *)mpt); 238 skip_entry(&mpt, &count, sizeof(struct mpc_bus)); 239 break; 240 case MP_IOAPIC: 241 MP_ioapic_info((struct mpc_ioapic *)mpt); 242 skip_entry(&mpt, &count, sizeof(struct mpc_ioapic)); 243 break; 244 case MP_INTSRC: 245 mp_save_irq((struct mpc_intsrc *)mpt); 246 skip_entry(&mpt, &count, sizeof(struct mpc_intsrc)); 247 break; 248 case MP_LINTSRC: 249 MP_lintsrc_info((struct mpc_lintsrc *)mpt); 250 skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc)); 251 break; 252 default: 253 /* wrong mptable */ 254 smp_dump_mptable(mpc, mpt); 255 count = mpc->length; 256 break; 257 } 258 x86_init.mpparse.mpc_record(1); 259 } 260 261 if (!num_processors) 262 pr_err("MPTABLE: no processors registered!\n"); 263 return num_processors; 264 } 265 266 #ifdef CONFIG_X86_IO_APIC 267 268 static int __init ELCR_trigger(unsigned int irq) 269 { 270 unsigned int port; 271 272 port = 0x4d0 + (irq >> 3); 273 return (inb(port) >> (irq & 7)) & 1; 274 } 275 276 static void __init construct_default_ioirq_mptable(int mpc_default_type) 277 { 278 struct mpc_intsrc intsrc; 279 int i; 280 int ELCR_fallback = 0; 281 282 intsrc.type = MP_INTSRC; 283 intsrc.irqflag = 0; /* conforming */ 284 intsrc.srcbus = 0; 285 intsrc.dstapic = mpc_ioapic_id(0); 286 287 intsrc.irqtype = mp_INT; 288 289 /* 290 * If true, we have an ISA/PCI system with no IRQ entries 291 * in the MP table. To prevent the PCI interrupts from being set up 292 * incorrectly, we try to use the ELCR. The sanity check to see if 293 * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can 294 * never be level sensitive, so we simply see if the ELCR agrees. 295 * If it does, we assume it's valid. 296 */ 297 if (mpc_default_type == 5) { 298 pr_info("ISA/PCI bus type with no IRQ information... falling back to ELCR\n"); 299 300 if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || 301 ELCR_trigger(13)) 302 pr_err("ELCR contains invalid data... not using ELCR\n"); 303 else { 304 pr_info("Using ELCR to identify PCI interrupts\n"); 305 ELCR_fallback = 1; 306 } 307 } 308 309 for (i = 0; i < 16; i++) { 310 switch (mpc_default_type) { 311 case 2: 312 if (i == 0 || i == 13) 313 continue; /* IRQ0 & IRQ13 not connected */ 314 /* fall through */ 315 default: 316 if (i == 2) 317 continue; /* IRQ2 is never connected */ 318 } 319 320 if (ELCR_fallback) { 321 /* 322 * If the ELCR indicates a level-sensitive interrupt, we 323 * copy that information over to the MP table in the 324 * irqflag field (level sensitive, active high polarity). 325 */ 326 if (ELCR_trigger(i)) 327 intsrc.irqflag = 13; 328 else 329 intsrc.irqflag = 0; 330 } 331 332 intsrc.srcbusirq = i; 333 intsrc.dstirq = i ? i : 2; /* IRQ0 to INTIN2 */ 334 mp_save_irq(&intsrc); 335 } 336 337 intsrc.irqtype = mp_ExtINT; 338 intsrc.srcbusirq = 0; 339 intsrc.dstirq = 0; /* 8259A to INTIN0 */ 340 mp_save_irq(&intsrc); 341 } 342 343 344 static void __init construct_ioapic_table(int mpc_default_type) 345 { 346 struct mpc_ioapic ioapic; 347 struct mpc_bus bus; 348 349 bus.type = MP_BUS; 350 bus.busid = 0; 351 switch (mpc_default_type) { 352 default: 353 pr_err("???\nUnknown standard configuration %d\n", 354 mpc_default_type); 355 /* fall through */ 356 case 1: 357 case 5: 358 memcpy(bus.bustype, "ISA ", 6); 359 break; 360 case 2: 361 case 6: 362 case 3: 363 memcpy(bus.bustype, "EISA ", 6); 364 break; 365 } 366 MP_bus_info(&bus); 367 if (mpc_default_type > 4) { 368 bus.busid = 1; 369 memcpy(bus.bustype, "PCI ", 6); 370 MP_bus_info(&bus); 371 } 372 373 ioapic.type = MP_IOAPIC; 374 ioapic.apicid = 2; 375 ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01; 376 ioapic.flags = MPC_APIC_USABLE; 377 ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE; 378 MP_ioapic_info(&ioapic); 379 380 /* 381 * We set up most of the low 16 IO-APIC pins according to MPS rules. 382 */ 383 construct_default_ioirq_mptable(mpc_default_type); 384 } 385 #else 386 static inline void __init construct_ioapic_table(int mpc_default_type) { } 387 #endif 388 389 static inline void __init construct_default_ISA_mptable(int mpc_default_type) 390 { 391 struct mpc_cpu processor; 392 struct mpc_lintsrc lintsrc; 393 int linttypes[2] = { mp_ExtINT, mp_NMI }; 394 int i; 395 396 /* 397 * local APIC has default address 398 */ 399 mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; 400 401 /* 402 * 2 CPUs, numbered 0 & 1. 403 */ 404 processor.type = MP_PROCESSOR; 405 /* Either an integrated APIC or a discrete 82489DX. */ 406 processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01; 407 processor.cpuflag = CPU_ENABLED; 408 processor.cpufeature = (boot_cpu_data.x86 << 8) | 409 (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask; 410 processor.featureflag = boot_cpu_data.x86_capability[CPUID_1_EDX]; 411 processor.reserved[0] = 0; 412 processor.reserved[1] = 0; 413 for (i = 0; i < 2; i++) { 414 processor.apicid = i; 415 MP_processor_info(&processor); 416 } 417 418 construct_ioapic_table(mpc_default_type); 419 420 lintsrc.type = MP_LINTSRC; 421 lintsrc.irqflag = 0; /* conforming */ 422 lintsrc.srcbusid = 0; 423 lintsrc.srcbusirq = 0; 424 lintsrc.destapic = MP_APIC_ALL; 425 for (i = 0; i < 2; i++) { 426 lintsrc.irqtype = linttypes[i]; 427 lintsrc.destapiclint = i; 428 MP_lintsrc_info(&lintsrc); 429 } 430 } 431 432 static struct mpf_intel *mpf_found; 433 434 static unsigned long __init get_mpc_size(unsigned long physptr) 435 { 436 struct mpc_table *mpc; 437 unsigned long size; 438 439 mpc = early_ioremap(physptr, PAGE_SIZE); 440 size = mpc->length; 441 early_iounmap(mpc, PAGE_SIZE); 442 apic_printk(APIC_VERBOSE, " mpc: %lx-%lx\n", physptr, physptr + size); 443 444 return size; 445 } 446 447 static int __init check_physptr(struct mpf_intel *mpf, unsigned int early) 448 { 449 struct mpc_table *mpc; 450 unsigned long size; 451 452 size = get_mpc_size(mpf->physptr); 453 mpc = early_ioremap(mpf->physptr, size); 454 /* 455 * Read the physical hardware table. Anything here will 456 * override the defaults. 457 */ 458 if (!smp_read_mpc(mpc, early)) { 459 #ifdef CONFIG_X86_LOCAL_APIC 460 smp_found_config = 0; 461 #endif 462 pr_err("BIOS bug, MP table errors detected!...\n"); 463 pr_cont("... disabling SMP support. (tell your hw vendor)\n"); 464 early_iounmap(mpc, size); 465 return -1; 466 } 467 early_iounmap(mpc, size); 468 469 if (early) 470 return -1; 471 472 #ifdef CONFIG_X86_IO_APIC 473 /* 474 * If there are no explicit MP IRQ entries, then we are 475 * broken. We set up most of the low 16 IO-APIC pins to 476 * ISA defaults and hope it will work. 477 */ 478 if (!mp_irq_entries) { 479 struct mpc_bus bus; 480 481 pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n"); 482 483 bus.type = MP_BUS; 484 bus.busid = 0; 485 memcpy(bus.bustype, "ISA ", 6); 486 MP_bus_info(&bus); 487 488 construct_default_ioirq_mptable(0); 489 } 490 #endif 491 492 return 0; 493 } 494 495 /* 496 * Scan the memory blocks for an SMP configuration block. 497 */ 498 void __init default_get_smp_config(unsigned int early) 499 { 500 struct mpf_intel *mpf = mpf_found; 501 502 if (!smp_found_config) 503 return; 504 505 if (!mpf) 506 return; 507 508 if (acpi_lapic && early) 509 return; 510 511 /* 512 * MPS doesn't support hyperthreading, aka only have 513 * thread 0 apic id in MPS table 514 */ 515 if (acpi_lapic && acpi_ioapic) 516 return; 517 518 pr_info("Intel MultiProcessor Specification v1.%d\n", 519 mpf->specification); 520 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) 521 if (mpf->feature2 & (1 << 7)) { 522 pr_info(" IMCR and PIC compatibility mode.\n"); 523 pic_mode = 1; 524 } else { 525 pr_info(" Virtual Wire compatibility mode.\n"); 526 pic_mode = 0; 527 } 528 #endif 529 /* 530 * Now see if we need to read further. 531 */ 532 if (mpf->feature1 != 0) { 533 if (early) { 534 /* 535 * local APIC has default address 536 */ 537 mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; 538 return; 539 } 540 541 pr_info("Default MP configuration #%d\n", mpf->feature1); 542 construct_default_ISA_mptable(mpf->feature1); 543 544 } else if (mpf->physptr) { 545 if (check_physptr(mpf, early)) 546 return; 547 } else 548 BUG(); 549 550 if (!early) 551 pr_info("Processors: %d\n", num_processors); 552 /* 553 * Only use the first configuration found. 554 */ 555 } 556 557 static void __init smp_reserve_memory(struct mpf_intel *mpf) 558 { 559 memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr)); 560 } 561 562 static int __init smp_scan_config(unsigned long base, unsigned long length) 563 { 564 unsigned int *bp = phys_to_virt(base); 565 struct mpf_intel *mpf; 566 unsigned long mem; 567 568 apic_printk(APIC_VERBOSE, "Scan for SMP in [mem %#010lx-%#010lx]\n", 569 base, base + length - 1); 570 BUILD_BUG_ON(sizeof(*mpf) != 16); 571 572 while (length > 0) { 573 mpf = (struct mpf_intel *)bp; 574 if ((*bp == SMP_MAGIC_IDENT) && 575 (mpf->length == 1) && 576 !mpf_checksum((unsigned char *)bp, 16) && 577 ((mpf->specification == 1) 578 || (mpf->specification == 4))) { 579 #ifdef CONFIG_X86_LOCAL_APIC 580 smp_found_config = 1; 581 #endif 582 mpf_found = mpf; 583 584 pr_info("found SMP MP-table at [mem %#010llx-%#010llx] mapped at [%p]\n", 585 (unsigned long long) virt_to_phys(mpf), 586 (unsigned long long) virt_to_phys(mpf) + 587 sizeof(*mpf) - 1, mpf); 588 589 mem = virt_to_phys(mpf); 590 memblock_reserve(mem, sizeof(*mpf)); 591 if (mpf->physptr) 592 smp_reserve_memory(mpf); 593 594 return 1; 595 } 596 bp += 4; 597 length -= 16; 598 } 599 return 0; 600 } 601 602 void __init default_find_smp_config(void) 603 { 604 unsigned int address; 605 606 /* 607 * FIXME: Linux assumes you have 640K of base ram.. 608 * this continues the error... 609 * 610 * 1) Scan the bottom 1K for a signature 611 * 2) Scan the top 1K of base RAM 612 * 3) Scan the 64K of bios 613 */ 614 if (smp_scan_config(0x0, 0x400) || 615 smp_scan_config(639 * 0x400, 0x400) || 616 smp_scan_config(0xF0000, 0x10000)) 617 return; 618 /* 619 * If it is an SMP machine we should know now, unless the 620 * configuration is in an EISA bus machine with an 621 * extended bios data area. 622 * 623 * there is a real-mode segmented pointer pointing to the 624 * 4K EBDA area at 0x40E, calculate and scan it here. 625 * 626 * NOTE! There are Linux loaders that will corrupt the EBDA 627 * area, and as such this kind of SMP config may be less 628 * trustworthy, simply because the SMP table may have been 629 * stomped on during early boot. These loaders are buggy and 630 * should be fixed. 631 * 632 * MP1.4 SPEC states to only scan first 1K of 4K EBDA. 633 */ 634 635 address = get_bios_ebda(); 636 if (address) 637 smp_scan_config(address, 0x400); 638 } 639 640 #ifdef CONFIG_X86_IO_APIC 641 static u8 __initdata irq_used[MAX_IRQ_SOURCES]; 642 643 static int __init get_MP_intsrc_index(struct mpc_intsrc *m) 644 { 645 int i; 646 647 if (m->irqtype != mp_INT) 648 return 0; 649 650 if (m->irqflag != 0x0f) 651 return 0; 652 653 /* not legacy */ 654 655 for (i = 0; i < mp_irq_entries; i++) { 656 if (mp_irqs[i].irqtype != mp_INT) 657 continue; 658 659 if (mp_irqs[i].irqflag != 0x0f) 660 continue; 661 662 if (mp_irqs[i].srcbus != m->srcbus) 663 continue; 664 if (mp_irqs[i].srcbusirq != m->srcbusirq) 665 continue; 666 if (irq_used[i]) { 667 /* already claimed */ 668 return -2; 669 } 670 irq_used[i] = 1; 671 return i; 672 } 673 674 /* not found */ 675 return -1; 676 } 677 678 #define SPARE_SLOT_NUM 20 679 680 static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM]; 681 682 static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) 683 { 684 int i; 685 686 apic_printk(APIC_VERBOSE, "OLD "); 687 print_mp_irq_info(m); 688 689 i = get_MP_intsrc_index(m); 690 if (i > 0) { 691 memcpy(m, &mp_irqs[i], sizeof(*m)); 692 apic_printk(APIC_VERBOSE, "NEW "); 693 print_mp_irq_info(&mp_irqs[i]); 694 return; 695 } 696 if (!i) { 697 /* legacy, do nothing */ 698 return; 699 } 700 if (*nr_m_spare < SPARE_SLOT_NUM) { 701 /* 702 * not found (-1), or duplicated (-2) are invalid entries, 703 * we need to use the slot later 704 */ 705 m_spare[*nr_m_spare] = m; 706 *nr_m_spare += 1; 707 } 708 } 709 710 static int __init 711 check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count) 712 { 713 if (!mpc_new_phys || count <= mpc_new_length) { 714 WARN(1, "update_mptable: No spare slots (length: %x)\n", count); 715 return -1; 716 } 717 718 return 0; 719 } 720 #else /* CONFIG_X86_IO_APIC */ 721 static 722 inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {} 723 #endif /* CONFIG_X86_IO_APIC */ 724 725 static int __init replace_intsrc_all(struct mpc_table *mpc, 726 unsigned long mpc_new_phys, 727 unsigned long mpc_new_length) 728 { 729 #ifdef CONFIG_X86_IO_APIC 730 int i; 731 #endif 732 int count = sizeof(*mpc); 733 int nr_m_spare = 0; 734 unsigned char *mpt = ((unsigned char *)mpc) + count; 735 736 pr_info("mpc_length %x\n", mpc->length); 737 while (count < mpc->length) { 738 switch (*mpt) { 739 case MP_PROCESSOR: 740 skip_entry(&mpt, &count, sizeof(struct mpc_cpu)); 741 break; 742 case MP_BUS: 743 skip_entry(&mpt, &count, sizeof(struct mpc_bus)); 744 break; 745 case MP_IOAPIC: 746 skip_entry(&mpt, &count, sizeof(struct mpc_ioapic)); 747 break; 748 case MP_INTSRC: 749 check_irq_src((struct mpc_intsrc *)mpt, &nr_m_spare); 750 skip_entry(&mpt, &count, sizeof(struct mpc_intsrc)); 751 break; 752 case MP_LINTSRC: 753 skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc)); 754 break; 755 default: 756 /* wrong mptable */ 757 smp_dump_mptable(mpc, mpt); 758 goto out; 759 } 760 } 761 762 #ifdef CONFIG_X86_IO_APIC 763 for (i = 0; i < mp_irq_entries; i++) { 764 if (irq_used[i]) 765 continue; 766 767 if (mp_irqs[i].irqtype != mp_INT) 768 continue; 769 770 if (mp_irqs[i].irqflag != 0x0f) 771 continue; 772 773 if (nr_m_spare > 0) { 774 apic_printk(APIC_VERBOSE, "*NEW* found\n"); 775 nr_m_spare--; 776 memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i])); 777 m_spare[nr_m_spare] = NULL; 778 } else { 779 struct mpc_intsrc *m = (struct mpc_intsrc *)mpt; 780 count += sizeof(struct mpc_intsrc); 781 if (check_slot(mpc_new_phys, mpc_new_length, count) < 0) 782 goto out; 783 memcpy(m, &mp_irqs[i], sizeof(*m)); 784 mpc->length = count; 785 mpt += sizeof(struct mpc_intsrc); 786 } 787 print_mp_irq_info(&mp_irqs[i]); 788 } 789 #endif 790 out: 791 /* update checksum */ 792 mpc->checksum = 0; 793 mpc->checksum -= mpf_checksum((unsigned char *)mpc, mpc->length); 794 795 return 0; 796 } 797 798 int enable_update_mptable; 799 800 static int __init update_mptable_setup(char *str) 801 { 802 enable_update_mptable = 1; 803 #ifdef CONFIG_PCI 804 pci_routeirq = 1; 805 #endif 806 return 0; 807 } 808 early_param("update_mptable", update_mptable_setup); 809 810 static unsigned long __initdata mpc_new_phys; 811 static unsigned long mpc_new_length __initdata = 4096; 812 813 /* alloc_mptable or alloc_mptable=4k */ 814 static int __initdata alloc_mptable; 815 static int __init parse_alloc_mptable_opt(char *p) 816 { 817 enable_update_mptable = 1; 818 #ifdef CONFIG_PCI 819 pci_routeirq = 1; 820 #endif 821 alloc_mptable = 1; 822 if (!p) 823 return 0; 824 mpc_new_length = memparse(p, &p); 825 return 0; 826 } 827 early_param("alloc_mptable", parse_alloc_mptable_opt); 828 829 void __init e820__memblock_alloc_reserved_mpc_new(void) 830 { 831 if (enable_update_mptable && alloc_mptable) 832 mpc_new_phys = e820__memblock_alloc_reserved(mpc_new_length, 4); 833 } 834 835 static int __init update_mp_table(void) 836 { 837 char str[16]; 838 char oem[10]; 839 struct mpf_intel *mpf; 840 struct mpc_table *mpc, *mpc_new; 841 842 if (!enable_update_mptable) 843 return 0; 844 845 mpf = mpf_found; 846 if (!mpf) 847 return 0; 848 849 /* 850 * Now see if we need to go further. 851 */ 852 if (mpf->feature1 != 0) 853 return 0; 854 855 if (!mpf->physptr) 856 return 0; 857 858 mpc = phys_to_virt(mpf->physptr); 859 860 if (!smp_check_mpc(mpc, oem, str)) 861 return 0; 862 863 pr_info("mpf: %llx\n", (u64)virt_to_phys(mpf)); 864 pr_info("physptr: %x\n", mpf->physptr); 865 866 if (mpc_new_phys && mpc->length > mpc_new_length) { 867 mpc_new_phys = 0; 868 pr_info("mpc_new_length is %ld, please use alloc_mptable=8k\n", 869 mpc_new_length); 870 } 871 872 if (!mpc_new_phys) { 873 unsigned char old, new; 874 /* check if we can change the position */ 875 mpc->checksum = 0; 876 old = mpf_checksum((unsigned char *)mpc, mpc->length); 877 mpc->checksum = 0xff; 878 new = mpf_checksum((unsigned char *)mpc, mpc->length); 879 if (old == new) { 880 pr_info("mpc is readonly, please try alloc_mptable instead\n"); 881 return 0; 882 } 883 pr_info("use in-position replacing\n"); 884 } else { 885 mpf->physptr = mpc_new_phys; 886 mpc_new = phys_to_virt(mpc_new_phys); 887 memcpy(mpc_new, mpc, mpc->length); 888 mpc = mpc_new; 889 /* check if we can modify that */ 890 if (mpc_new_phys - mpf->physptr) { 891 struct mpf_intel *mpf_new; 892 /* steal 16 bytes from [0, 1k) */ 893 pr_info("mpf new: %x\n", 0x400 - 16); 894 mpf_new = phys_to_virt(0x400 - 16); 895 memcpy(mpf_new, mpf, 16); 896 mpf = mpf_new; 897 mpf->physptr = mpc_new_phys; 898 } 899 mpf->checksum = 0; 900 mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16); 901 pr_info("physptr new: %x\n", mpf->physptr); 902 } 903 904 /* 905 * only replace the one with mp_INT and 906 * MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 907 * already in mp_irqs , stored by ... and mp_config_acpi_gsi, 908 * may need pci=routeirq for all coverage 909 */ 910 replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length); 911 912 return 0; 913 } 914 915 late_initcall(update_mp_table); 916