1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Kernel Probes Jump Optimization (Optprobes) 4 * 5 * Copyright (C) IBM Corporation, 2002, 2004 6 * Copyright (C) Hitachi Ltd., 2012 7 */ 8 #include <linux/kprobes.h> 9 #include <linux/perf_event.h> 10 #include <linux/ptrace.h> 11 #include <linux/string.h> 12 #include <linux/slab.h> 13 #include <linux/hardirq.h> 14 #include <linux/preempt.h> 15 #include <linux/extable.h> 16 #include <linux/kdebug.h> 17 #include <linux/kallsyms.h> 18 #include <linux/kgdb.h> 19 #include <linux/ftrace.h> 20 #include <linux/objtool.h> 21 #include <linux/pgtable.h> 22 #include <linux/static_call.h> 23 24 #include <asm/text-patching.h> 25 #include <asm/cacheflush.h> 26 #include <asm/desc.h> 27 #include <linux/uaccess.h> 28 #include <asm/alternative.h> 29 #include <asm/insn.h> 30 #include <asm/debugreg.h> 31 #include <asm/set_memory.h> 32 #include <asm/sections.h> 33 #include <asm/nospec-branch.h> 34 35 #include "common.h" 36 37 unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsigned long addr) 38 { 39 struct optimized_kprobe *op; 40 struct kprobe *kp; 41 long offs; 42 int i; 43 44 for (i = 0; i < JMP32_INSN_SIZE; i++) { 45 kp = get_kprobe((void *)addr - i); 46 /* This function only handles jump-optimized kprobe */ 47 if (kp && kprobe_optimized(kp)) { 48 op = container_of(kp, struct optimized_kprobe, kp); 49 /* If op is optimized or under unoptimizing */ 50 if (list_empty(&op->list) || optprobe_queued_unopt(op)) 51 goto found; 52 } 53 } 54 55 return addr; 56 found: 57 /* 58 * If the kprobe can be optimized, original bytes which can be 59 * overwritten by jump destination address. In this case, original 60 * bytes must be recovered from op->optinsn.copied_insn buffer. 61 */ 62 if (copy_from_kernel_nofault(buf, (void *)addr, 63 MAX_INSN_SIZE * sizeof(kprobe_opcode_t))) 64 return 0UL; 65 66 if (addr == (unsigned long)kp->addr) { 67 buf[0] = kp->opcode; 68 memcpy(buf + 1, op->optinsn.copied_insn, DISP32_SIZE); 69 } else { 70 offs = addr - (unsigned long)kp->addr - 1; 71 memcpy(buf, op->optinsn.copied_insn + offs, DISP32_SIZE - offs); 72 } 73 74 return (unsigned long)buf; 75 } 76 77 static void synthesize_clac(kprobe_opcode_t *addr) 78 { 79 /* 80 * Can't be static_cpu_has() due to how objtool treats this feature bit. 81 * This isn't a fast path anyway. 82 */ 83 if (!boot_cpu_has(X86_FEATURE_SMAP)) 84 return; 85 86 /* Replace the NOP3 with CLAC */ 87 addr[0] = 0x0f; 88 addr[1] = 0x01; 89 addr[2] = 0xca; 90 } 91 92 /* Insert a move instruction which sets a pointer to eax/rdi (1st arg). */ 93 static void synthesize_set_arg1(kprobe_opcode_t *addr, unsigned long val) 94 { 95 #ifdef CONFIG_X86_64 96 *addr++ = 0x48; 97 *addr++ = 0xbf; 98 #else 99 *addr++ = 0xb8; 100 #endif 101 *(unsigned long *)addr = val; 102 } 103 104 asm ( 105 ".pushsection .rodata\n" 106 "optprobe_template_func:\n" 107 ".global optprobe_template_entry\n" 108 "optprobe_template_entry:\n" 109 #ifdef CONFIG_X86_64 110 " pushq $" __stringify(__KERNEL_DS) "\n" 111 /* Save the 'sp - 8', this will be fixed later. */ 112 " pushq %rsp\n" 113 " pushfq\n" 114 ".global optprobe_template_clac\n" 115 "optprobe_template_clac:\n" 116 ASM_NOP3 117 SAVE_REGS_STRING 118 " movq %rsp, %rsi\n" 119 ".global optprobe_template_val\n" 120 "optprobe_template_val:\n" 121 ASM_NOP5 122 ASM_NOP5 123 ".global optprobe_template_call\n" 124 "optprobe_template_call:\n" 125 ASM_NOP5 126 /* Copy 'regs->flags' into 'regs->ss'. */ 127 " movq 18*8(%rsp), %rdx\n" 128 " movq %rdx, 20*8(%rsp)\n" 129 RESTORE_REGS_STRING 130 /* Skip 'regs->flags' and 'regs->sp'. */ 131 " addq $16, %rsp\n" 132 /* And pop flags register from 'regs->ss'. */ 133 " popfq\n" 134 #else /* CONFIG_X86_32 */ 135 " pushl %ss\n" 136 /* Save the 'sp - 4', this will be fixed later. */ 137 " pushl %esp\n" 138 " pushfl\n" 139 ".global optprobe_template_clac\n" 140 "optprobe_template_clac:\n" 141 ASM_NOP3 142 SAVE_REGS_STRING 143 " movl %esp, %edx\n" 144 ".global optprobe_template_val\n" 145 "optprobe_template_val:\n" 146 ASM_NOP5 147 ".global optprobe_template_call\n" 148 "optprobe_template_call:\n" 149 ASM_NOP5 150 /* Copy 'regs->flags' into 'regs->ss'. */ 151 " movl 14*4(%esp), %edx\n" 152 " movl %edx, 16*4(%esp)\n" 153 RESTORE_REGS_STRING 154 /* Skip 'regs->flags' and 'regs->sp'. */ 155 " addl $8, %esp\n" 156 /* And pop flags register from 'regs->ss'. */ 157 " popfl\n" 158 #endif 159 ".global optprobe_template_end\n" 160 "optprobe_template_end:\n" 161 ".popsection\n"); 162 163 void optprobe_template_func(void); 164 STACK_FRAME_NON_STANDARD(optprobe_template_func); 165 166 #define TMPL_CLAC_IDX \ 167 ((long)optprobe_template_clac - (long)optprobe_template_entry) 168 #define TMPL_MOVE_IDX \ 169 ((long)optprobe_template_val - (long)optprobe_template_entry) 170 #define TMPL_CALL_IDX \ 171 ((long)optprobe_template_call - (long)optprobe_template_entry) 172 #define TMPL_END_IDX \ 173 ((long)optprobe_template_end - (long)optprobe_template_entry) 174 175 /* Optimized kprobe call back function: called from optinsn */ 176 static void 177 optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) 178 { 179 /* This is possible if op is under delayed unoptimizing */ 180 if (kprobe_disabled(&op->kp)) 181 return; 182 183 preempt_disable(); 184 if (kprobe_running()) { 185 kprobes_inc_nmissed_count(&op->kp); 186 } else { 187 struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); 188 /* Adjust stack pointer */ 189 regs->sp += sizeof(long); 190 /* Save skipped registers */ 191 regs->cs = __KERNEL_CS; 192 #ifdef CONFIG_X86_32 193 regs->gs = 0; 194 #endif 195 regs->ip = (unsigned long)op->kp.addr + INT3_INSN_SIZE; 196 regs->orig_ax = ~0UL; 197 198 __this_cpu_write(current_kprobe, &op->kp); 199 kcb->kprobe_status = KPROBE_HIT_ACTIVE; 200 opt_pre_handler(&op->kp, regs); 201 __this_cpu_write(current_kprobe, NULL); 202 } 203 preempt_enable(); 204 } 205 NOKPROBE_SYMBOL(optimized_callback); 206 207 static int copy_optimized_instructions(u8 *dest, u8 *src, u8 *real) 208 { 209 struct insn insn; 210 int len = 0, ret; 211 212 while (len < JMP32_INSN_SIZE) { 213 ret = __copy_instruction(dest + len, src + len, real + len, &insn); 214 if (!ret || !can_boost(&insn, src + len)) 215 return -EINVAL; 216 len += ret; 217 } 218 /* Check whether the address range is reserved */ 219 if (ftrace_text_reserved(src, src + len - 1) || 220 alternatives_text_reserved(src, src + len - 1) || 221 jump_label_text_reserved(src, src + len - 1) || 222 static_call_text_reserved(src, src + len - 1)) 223 return -EBUSY; 224 225 return len; 226 } 227 228 /* Check whether insn is indirect jump */ 229 static int __insn_is_indirect_jump(struct insn *insn) 230 { 231 return ((insn->opcode.bytes[0] == 0xff && 232 (X86_MODRM_REG(insn->modrm.value) & 6) == 4) || /* Jump */ 233 insn->opcode.bytes[0] == 0xea); /* Segment based jump */ 234 } 235 236 /* Check whether insn jumps into specified address range */ 237 static int insn_jump_into_range(struct insn *insn, unsigned long start, int len) 238 { 239 unsigned long target = 0; 240 241 switch (insn->opcode.bytes[0]) { 242 case 0xe0: /* loopne */ 243 case 0xe1: /* loope */ 244 case 0xe2: /* loop */ 245 case 0xe3: /* jcxz */ 246 case 0xe9: /* near relative jump */ 247 case 0xeb: /* short relative jump */ 248 break; 249 case 0x0f: 250 if ((insn->opcode.bytes[1] & 0xf0) == 0x80) /* jcc near */ 251 break; 252 return 0; 253 default: 254 if ((insn->opcode.bytes[0] & 0xf0) == 0x70) /* jcc short */ 255 break; 256 return 0; 257 } 258 target = (unsigned long)insn->next_byte + insn->immediate.value; 259 260 return (start <= target && target <= start + len); 261 } 262 263 static int insn_is_indirect_jump(struct insn *insn) 264 { 265 int ret = __insn_is_indirect_jump(insn); 266 267 #ifdef CONFIG_RETPOLINE 268 /* 269 * Jump to x86_indirect_thunk_* is treated as an indirect jump. 270 * Note that even with CONFIG_RETPOLINE=y, the kernel compiled with 271 * older gcc may use indirect jump. So we add this check instead of 272 * replace indirect-jump check. 273 */ 274 if (!ret) 275 ret = insn_jump_into_range(insn, 276 (unsigned long)__indirect_thunk_start, 277 (unsigned long)__indirect_thunk_end - 278 (unsigned long)__indirect_thunk_start); 279 #endif 280 return ret; 281 } 282 283 /* Decode whole function to ensure any instructions don't jump into target */ 284 static int can_optimize(unsigned long paddr) 285 { 286 unsigned long addr, size = 0, offset = 0; 287 struct insn insn; 288 kprobe_opcode_t buf[MAX_INSN_SIZE]; 289 290 /* Lookup symbol including addr */ 291 if (!kallsyms_lookup_size_offset(paddr, &size, &offset)) 292 return 0; 293 294 /* 295 * Do not optimize in the entry code due to the unstable 296 * stack handling and registers setup. 297 */ 298 if (((paddr >= (unsigned long)__entry_text_start) && 299 (paddr < (unsigned long)__entry_text_end))) 300 return 0; 301 302 /* Check there is enough space for a relative jump. */ 303 if (size - offset < JMP32_INSN_SIZE) 304 return 0; 305 306 /* Decode instructions */ 307 addr = paddr - offset; 308 while (addr < paddr - offset + size) { /* Decode until function end */ 309 unsigned long recovered_insn; 310 int ret; 311 312 if (search_exception_tables(addr)) 313 /* 314 * Since some fixup code will jumps into this function, 315 * we can't optimize kprobe in this function. 316 */ 317 return 0; 318 recovered_insn = recover_probed_instruction(buf, addr); 319 if (!recovered_insn) 320 return 0; 321 322 ret = insn_decode_kernel(&insn, (void *)recovered_insn); 323 if (ret < 0) 324 return 0; 325 #ifdef CONFIG_KGDB 326 /* 327 * If there is a dynamically installed kgdb sw breakpoint, 328 * this function should not be probed. 329 */ 330 if (insn.opcode.bytes[0] == INT3_INSN_OPCODE && 331 kgdb_has_hit_break(addr)) 332 return 0; 333 #endif 334 /* Recover address */ 335 insn.kaddr = (void *)addr; 336 insn.next_byte = (void *)(addr + insn.length); 337 /* Check any instructions don't jump into target */ 338 if (insn_is_indirect_jump(&insn) || 339 insn_jump_into_range(&insn, paddr + INT3_INSN_SIZE, 340 DISP32_SIZE)) 341 return 0; 342 addr += insn.length; 343 } 344 345 return 1; 346 } 347 348 /* Check optimized_kprobe can actually be optimized. */ 349 int arch_check_optimized_kprobe(struct optimized_kprobe *op) 350 { 351 int i; 352 struct kprobe *p; 353 354 for (i = 1; i < op->optinsn.size; i++) { 355 p = get_kprobe(op->kp.addr + i); 356 if (p && !kprobe_disarmed(p)) 357 return -EEXIST; 358 } 359 360 return 0; 361 } 362 363 /* Check the addr is within the optimized instructions. */ 364 int arch_within_optimized_kprobe(struct optimized_kprobe *op, 365 kprobe_opcode_t *addr) 366 { 367 return (op->kp.addr <= addr && 368 op->kp.addr + op->optinsn.size > addr); 369 } 370 371 /* Free optimized instruction slot */ 372 static 373 void __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty) 374 { 375 u8 *slot = op->optinsn.insn; 376 if (slot) { 377 int len = TMPL_END_IDX + op->optinsn.size + JMP32_INSN_SIZE; 378 379 /* Record the perf event before freeing the slot */ 380 if (dirty) 381 perf_event_text_poke(slot, slot, len, NULL, 0); 382 383 free_optinsn_slot(slot, dirty); 384 op->optinsn.insn = NULL; 385 op->optinsn.size = 0; 386 } 387 } 388 389 void arch_remove_optimized_kprobe(struct optimized_kprobe *op) 390 { 391 __arch_remove_optimized_kprobe(op, 1); 392 } 393 394 /* 395 * Copy replacing target instructions 396 * Target instructions MUST be relocatable (checked inside) 397 * This is called when new aggr(opt)probe is allocated or reused. 398 */ 399 int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, 400 struct kprobe *__unused) 401 { 402 u8 *buf = NULL, *slot; 403 int ret, len; 404 long rel; 405 406 if (!can_optimize((unsigned long)op->kp.addr)) 407 return -EILSEQ; 408 409 buf = kzalloc(MAX_OPTINSN_SIZE, GFP_KERNEL); 410 if (!buf) 411 return -ENOMEM; 412 413 op->optinsn.insn = slot = get_optinsn_slot(); 414 if (!slot) { 415 ret = -ENOMEM; 416 goto out; 417 } 418 419 /* 420 * Verify if the address gap is in 2GB range, because this uses 421 * a relative jump. 422 */ 423 rel = (long)slot - (long)op->kp.addr + JMP32_INSN_SIZE; 424 if (abs(rel) > 0x7fffffff) { 425 ret = -ERANGE; 426 goto err; 427 } 428 429 /* Copy arch-dep-instance from template */ 430 memcpy(buf, optprobe_template_entry, TMPL_END_IDX); 431 432 /* Copy instructions into the out-of-line buffer */ 433 ret = copy_optimized_instructions(buf + TMPL_END_IDX, op->kp.addr, 434 slot + TMPL_END_IDX); 435 if (ret < 0) 436 goto err; 437 op->optinsn.size = ret; 438 len = TMPL_END_IDX + op->optinsn.size; 439 440 synthesize_clac(buf + TMPL_CLAC_IDX); 441 442 /* Set probe information */ 443 synthesize_set_arg1(buf + TMPL_MOVE_IDX, (unsigned long)op); 444 445 /* Set probe function call */ 446 synthesize_relcall(buf + TMPL_CALL_IDX, 447 slot + TMPL_CALL_IDX, optimized_callback); 448 449 /* Set returning jmp instruction at the tail of out-of-line buffer */ 450 synthesize_reljump(buf + len, slot + len, 451 (u8 *)op->kp.addr + op->optinsn.size); 452 len += JMP32_INSN_SIZE; 453 454 /* 455 * Note len = TMPL_END_IDX + op->optinsn.size + JMP32_INSN_SIZE is also 456 * used in __arch_remove_optimized_kprobe(). 457 */ 458 459 /* We have to use text_poke() for instruction buffer because it is RO */ 460 perf_event_text_poke(slot, NULL, 0, buf, len); 461 text_poke(slot, buf, len); 462 463 ret = 0; 464 out: 465 kfree(buf); 466 return ret; 467 468 err: 469 __arch_remove_optimized_kprobe(op, 0); 470 goto out; 471 } 472 473 /* 474 * Replace breakpoints (INT3) with relative jumps (JMP.d32). 475 * Caller must call with locking kprobe_mutex and text_mutex. 476 * 477 * The caller will have installed a regular kprobe and after that issued 478 * syncrhonize_rcu_tasks(), this ensures that the instruction(s) that live in 479 * the 4 bytes after the INT3 are unused and can now be overwritten. 480 */ 481 void arch_optimize_kprobes(struct list_head *oplist) 482 { 483 struct optimized_kprobe *op, *tmp; 484 u8 insn_buff[JMP32_INSN_SIZE]; 485 486 list_for_each_entry_safe(op, tmp, oplist, list) { 487 s32 rel = (s32)((long)op->optinsn.insn - 488 ((long)op->kp.addr + JMP32_INSN_SIZE)); 489 490 WARN_ON(kprobe_disabled(&op->kp)); 491 492 /* Backup instructions which will be replaced by jump address */ 493 memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_INSN_SIZE, 494 DISP32_SIZE); 495 496 insn_buff[0] = JMP32_INSN_OPCODE; 497 *(s32 *)(&insn_buff[1]) = rel; 498 499 text_poke_bp(op->kp.addr, insn_buff, JMP32_INSN_SIZE, NULL); 500 501 list_del_init(&op->list); 502 } 503 } 504 505 /* 506 * Replace a relative jump (JMP.d32) with a breakpoint (INT3). 507 * 508 * After that, we can restore the 4 bytes after the INT3 to undo what 509 * arch_optimize_kprobes() scribbled. This is safe since those bytes will be 510 * unused once the INT3 lands. 511 */ 512 void arch_unoptimize_kprobe(struct optimized_kprobe *op) 513 { 514 u8 new[JMP32_INSN_SIZE] = { INT3_INSN_OPCODE, }; 515 u8 old[JMP32_INSN_SIZE]; 516 u8 *addr = op->kp.addr; 517 518 memcpy(old, op->kp.addr, JMP32_INSN_SIZE); 519 memcpy(new + INT3_INSN_SIZE, 520 op->optinsn.copied_insn, 521 JMP32_INSN_SIZE - INT3_INSN_SIZE); 522 523 text_poke(addr, new, INT3_INSN_SIZE); 524 text_poke_sync(); 525 text_poke(addr + INT3_INSN_SIZE, 526 new + INT3_INSN_SIZE, 527 JMP32_INSN_SIZE - INT3_INSN_SIZE); 528 text_poke_sync(); 529 530 perf_event_text_poke(op->kp.addr, old, JMP32_INSN_SIZE, new, JMP32_INSN_SIZE); 531 } 532 533 /* 534 * Recover original instructions and breakpoints from relative jumps. 535 * Caller must call with locking kprobe_mutex. 536 */ 537 extern void arch_unoptimize_kprobes(struct list_head *oplist, 538 struct list_head *done_list) 539 { 540 struct optimized_kprobe *op, *tmp; 541 542 list_for_each_entry_safe(op, tmp, oplist, list) { 543 arch_unoptimize_kprobe(op); 544 list_move(&op->list, done_list); 545 } 546 } 547 548 int setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter) 549 { 550 struct optimized_kprobe *op; 551 552 if (p->flags & KPROBE_FLAG_OPTIMIZED) { 553 /* This kprobe is really able to run optimized path. */ 554 op = container_of(p, struct optimized_kprobe, kp); 555 /* Detour through copied instructions */ 556 regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX; 557 if (!reenter) 558 reset_current_kprobe(); 559 return 1; 560 } 561 return 0; 562 } 563 NOKPROBE_SYMBOL(setup_detour_execution); 564