xref: /linux/arch/x86/kernel/kexec-bzimage64.c (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Kexec bzImage loader
4  *
5  * Copyright (C) 2014 Red Hat Inc.
6  * Authors:
7  *      Vivek Goyal <vgoyal@redhat.com>
8  */
9 
10 #define pr_fmt(fmt)	"kexec-bzImage64: " fmt
11 
12 #include <linux/string.h>
13 #include <linux/printk.h>
14 #include <linux/errno.h>
15 #include <linux/slab.h>
16 #include <linux/kexec.h>
17 #include <linux/kernel.h>
18 #include <linux/mm.h>
19 #include <linux/efi.h>
20 #include <linux/random.h>
21 
22 #include <asm/bootparam.h>
23 #include <asm/setup.h>
24 #include <asm/crash.h>
25 #include <asm/efi.h>
26 #include <asm/e820/api.h>
27 #include <asm/kexec-bzimage64.h>
28 
29 #define MAX_ELFCOREHDR_STR_LEN	30	/* elfcorehdr=0x<64bit-value> */
30 
31 /*
32  * Defines lowest physical address for various segments. Not sure where
33  * exactly these limits came from. Current bzimage64 loader in kexec-tools
34  * uses these so I am retaining it. It can be changed over time as we gain
35  * more insight.
36  */
37 #define MIN_PURGATORY_ADDR	0x3000
38 #define MIN_BOOTPARAM_ADDR	0x3000
39 #define MIN_KERNEL_LOAD_ADDR	0x100000
40 #define MIN_INITRD_LOAD_ADDR	0x1000000
41 
42 /*
43  * This is a place holder for all boot loader specific data structure which
44  * gets allocated in one call but gets freed much later during cleanup
45  * time. Right now there is only one field but it can grow as need be.
46  */
47 struct bzimage64_data {
48 	/*
49 	 * Temporary buffer to hold bootparams buffer. This should be
50 	 * freed once the bootparam segment has been loaded.
51 	 */
52 	void *bootparams_buf;
53 };
54 
55 static int setup_initrd(struct boot_params *params,
56 		unsigned long initrd_load_addr, unsigned long initrd_len)
57 {
58 	params->hdr.ramdisk_image = initrd_load_addr & 0xffffffffUL;
59 	params->hdr.ramdisk_size = initrd_len & 0xffffffffUL;
60 
61 	params->ext_ramdisk_image = initrd_load_addr >> 32;
62 	params->ext_ramdisk_size = initrd_len >> 32;
63 
64 	return 0;
65 }
66 
67 static int setup_cmdline(struct kimage *image, struct boot_params *params,
68 			 unsigned long bootparams_load_addr,
69 			 unsigned long cmdline_offset, char *cmdline,
70 			 unsigned long cmdline_len)
71 {
72 	char *cmdline_ptr = ((char *)params) + cmdline_offset;
73 	unsigned long cmdline_ptr_phys, len = 0;
74 	uint32_t cmdline_low_32, cmdline_ext_32;
75 
76 	if (image->type == KEXEC_TYPE_CRASH) {
77 		len = sprintf(cmdline_ptr,
78 			"elfcorehdr=0x%lx ", image->elf_load_addr);
79 	}
80 	memcpy(cmdline_ptr + len, cmdline, cmdline_len);
81 	cmdline_len += len;
82 
83 	cmdline_ptr[cmdline_len - 1] = '\0';
84 
85 	kexec_dprintk("Final command line is: %s\n", cmdline_ptr);
86 	cmdline_ptr_phys = bootparams_load_addr + cmdline_offset;
87 	cmdline_low_32 = cmdline_ptr_phys & 0xffffffffUL;
88 	cmdline_ext_32 = cmdline_ptr_phys >> 32;
89 
90 	params->hdr.cmd_line_ptr = cmdline_low_32;
91 	if (cmdline_ext_32)
92 		params->ext_cmd_line_ptr = cmdline_ext_32;
93 
94 	return 0;
95 }
96 
97 static int setup_e820_entries(struct boot_params *params)
98 {
99 	unsigned int nr_e820_entries;
100 
101 	nr_e820_entries = e820_table_kexec->nr_entries;
102 
103 	/* TODO: Pass entries more than E820_MAX_ENTRIES_ZEROPAGE in bootparams setup data */
104 	if (nr_e820_entries > E820_MAX_ENTRIES_ZEROPAGE)
105 		nr_e820_entries = E820_MAX_ENTRIES_ZEROPAGE;
106 
107 	params->e820_entries = nr_e820_entries;
108 	memcpy(&params->e820_table, &e820_table_kexec->entries, nr_e820_entries*sizeof(struct e820_entry));
109 
110 	return 0;
111 }
112 
113 enum { RNG_SEED_LENGTH = 32 };
114 
115 static void
116 setup_rng_seed(struct boot_params *params, unsigned long params_load_addr,
117 	       unsigned int rng_seed_setup_data_offset)
118 {
119 	struct setup_data *sd = (void *)params + rng_seed_setup_data_offset;
120 	unsigned long setup_data_phys;
121 
122 	if (!rng_is_initialized())
123 		return;
124 
125 	sd->type = SETUP_RNG_SEED;
126 	sd->len = RNG_SEED_LENGTH;
127 	get_random_bytes(sd->data, RNG_SEED_LENGTH);
128 	setup_data_phys = params_load_addr + rng_seed_setup_data_offset;
129 	sd->next = params->hdr.setup_data;
130 	params->hdr.setup_data = setup_data_phys;
131 }
132 
133 #ifdef CONFIG_EFI
134 static int setup_efi_info_memmap(struct boot_params *params,
135 				  unsigned long params_load_addr,
136 				  unsigned int efi_map_offset,
137 				  unsigned int efi_map_sz)
138 {
139 	void *efi_map = (void *)params + efi_map_offset;
140 	unsigned long efi_map_phys_addr = params_load_addr + efi_map_offset;
141 	struct efi_info *ei = &params->efi_info;
142 
143 	if (!efi_map_sz)
144 		return 0;
145 
146 	efi_runtime_map_copy(efi_map, efi_map_sz);
147 
148 	ei->efi_memmap = efi_map_phys_addr & 0xffffffff;
149 	ei->efi_memmap_hi = efi_map_phys_addr >> 32;
150 	ei->efi_memmap_size = efi_map_sz;
151 
152 	return 0;
153 }
154 
155 static int
156 prepare_add_efi_setup_data(struct boot_params *params,
157 		       unsigned long params_load_addr,
158 		       unsigned int efi_setup_data_offset)
159 {
160 	unsigned long setup_data_phys;
161 	struct setup_data *sd = (void *)params + efi_setup_data_offset;
162 	struct efi_setup_data *esd = (void *)sd + sizeof(struct setup_data);
163 
164 	esd->fw_vendor = efi_fw_vendor;
165 	esd->tables = efi_config_table;
166 	esd->smbios = efi.smbios;
167 
168 	sd->type = SETUP_EFI;
169 	sd->len = sizeof(struct efi_setup_data);
170 
171 	/* Add setup data */
172 	setup_data_phys = params_load_addr + efi_setup_data_offset;
173 	sd->next = params->hdr.setup_data;
174 	params->hdr.setup_data = setup_data_phys;
175 
176 	return 0;
177 }
178 
179 static int
180 setup_efi_state(struct boot_params *params, unsigned long params_load_addr,
181 		unsigned int efi_map_offset, unsigned int efi_map_sz,
182 		unsigned int efi_setup_data_offset)
183 {
184 	struct efi_info *current_ei = &boot_params.efi_info;
185 	struct efi_info *ei = &params->efi_info;
186 
187 	if (!efi_enabled(EFI_RUNTIME_SERVICES))
188 		return 0;
189 
190 	if (!current_ei->efi_memmap_size)
191 		return 0;
192 
193 	params->secure_boot = boot_params.secure_boot;
194 	ei->efi_loader_signature = current_ei->efi_loader_signature;
195 	ei->efi_systab = current_ei->efi_systab;
196 	ei->efi_systab_hi = current_ei->efi_systab_hi;
197 
198 	ei->efi_memdesc_version = current_ei->efi_memdesc_version;
199 	ei->efi_memdesc_size = efi_get_runtime_map_desc_size();
200 
201 	setup_efi_info_memmap(params, params_load_addr, efi_map_offset,
202 			      efi_map_sz);
203 	prepare_add_efi_setup_data(params, params_load_addr,
204 				   efi_setup_data_offset);
205 	return 0;
206 }
207 #endif /* CONFIG_EFI */
208 
209 static void
210 setup_ima_state(const struct kimage *image, struct boot_params *params,
211 		unsigned long params_load_addr,
212 		unsigned int ima_setup_data_offset)
213 {
214 #ifdef CONFIG_IMA_KEXEC
215 	struct setup_data *sd = (void *)params + ima_setup_data_offset;
216 	unsigned long setup_data_phys;
217 	struct ima_setup_data *ima;
218 
219 	if (!image->ima_buffer_size)
220 		return;
221 
222 	sd->type = SETUP_IMA;
223 	sd->len = sizeof(*ima);
224 
225 	ima = (void *)sd + sizeof(struct setup_data);
226 	ima->addr = image->ima_buffer_addr;
227 	ima->size = image->ima_buffer_size;
228 
229 	/* Add setup data */
230 	setup_data_phys = params_load_addr + ima_setup_data_offset;
231 	sd->next = params->hdr.setup_data;
232 	params->hdr.setup_data = setup_data_phys;
233 #endif /* CONFIG_IMA_KEXEC */
234 }
235 
236 static int
237 setup_boot_parameters(struct kimage *image, struct boot_params *params,
238 		      unsigned long params_load_addr,
239 		      unsigned int efi_map_offset, unsigned int efi_map_sz,
240 		      unsigned int setup_data_offset)
241 {
242 	unsigned int nr_e820_entries;
243 	unsigned long long mem_k, start, end;
244 	int i, ret = 0;
245 
246 	/* Get subarch from existing bootparams */
247 	params->hdr.hardware_subarch = boot_params.hdr.hardware_subarch;
248 
249 	/* Copying screen_info will do? */
250 	memcpy(&params->screen_info, &screen_info, sizeof(struct screen_info));
251 
252 	/* Fill in memsize later */
253 	params->screen_info.ext_mem_k = 0;
254 	params->alt_mem_k = 0;
255 
256 	/* Always fill in RSDP: it is either 0 or a valid value */
257 	params->acpi_rsdp_addr = boot_params.acpi_rsdp_addr;
258 
259 	/* Default APM info */
260 	memset(&params->apm_bios_info, 0, sizeof(params->apm_bios_info));
261 
262 	/* Default drive info */
263 	memset(&params->hd0_info, 0, sizeof(params->hd0_info));
264 	memset(&params->hd1_info, 0, sizeof(params->hd1_info));
265 
266 #ifdef CONFIG_CRASH_DUMP
267 	if (image->type == KEXEC_TYPE_CRASH) {
268 		ret = crash_setup_memmap_entries(image, params);
269 		if (ret)
270 			return ret;
271 	} else
272 #endif
273 		setup_e820_entries(params);
274 
275 	nr_e820_entries = params->e820_entries;
276 
277 	kexec_dprintk("E820 memmap:\n");
278 	for (i = 0; i < nr_e820_entries; i++) {
279 		kexec_dprintk("%016llx-%016llx (%d)\n",
280 			      params->e820_table[i].addr,
281 			      params->e820_table[i].addr + params->e820_table[i].size - 1,
282 			      params->e820_table[i].type);
283 		if (params->e820_table[i].type != E820_TYPE_RAM)
284 			continue;
285 		start = params->e820_table[i].addr;
286 		end = params->e820_table[i].addr + params->e820_table[i].size - 1;
287 
288 		if ((start <= 0x100000) && end > 0x100000) {
289 			mem_k = (end >> 10) - (0x100000 >> 10);
290 			params->screen_info.ext_mem_k = mem_k;
291 			params->alt_mem_k = mem_k;
292 			if (mem_k > 0xfc00)
293 				params->screen_info.ext_mem_k = 0xfc00; /* 64M*/
294 			if (mem_k > 0xffffffff)
295 				params->alt_mem_k = 0xffffffff;
296 		}
297 	}
298 
299 #ifdef CONFIG_EFI
300 	/* Setup EFI state */
301 	setup_efi_state(params, params_load_addr, efi_map_offset, efi_map_sz,
302 			setup_data_offset);
303 	setup_data_offset += sizeof(struct setup_data) +
304 			sizeof(struct efi_setup_data);
305 #endif
306 
307 	if (IS_ENABLED(CONFIG_IMA_KEXEC)) {
308 		/* Setup IMA log buffer state */
309 		setup_ima_state(image, params, params_load_addr,
310 				setup_data_offset);
311 		setup_data_offset += sizeof(struct setup_data) +
312 				     sizeof(struct ima_setup_data);
313 	}
314 
315 	/* Setup RNG seed */
316 	setup_rng_seed(params, params_load_addr, setup_data_offset);
317 
318 	/* Setup EDD info */
319 	memcpy(params->eddbuf, boot_params.eddbuf,
320 				EDDMAXNR * sizeof(struct edd_info));
321 	params->eddbuf_entries = boot_params.eddbuf_entries;
322 
323 	memcpy(params->edd_mbr_sig_buffer, boot_params.edd_mbr_sig_buffer,
324 	       EDD_MBR_SIG_MAX * sizeof(unsigned int));
325 
326 	return ret;
327 }
328 
329 static int bzImage64_probe(const char *buf, unsigned long len)
330 {
331 	int ret = -ENOEXEC;
332 	struct setup_header *header;
333 
334 	/* kernel should be at least two sectors long */
335 	if (len < 2 * 512) {
336 		pr_err("File is too short to be a bzImage\n");
337 		return ret;
338 	}
339 
340 	header = (struct setup_header *)(buf + offsetof(struct boot_params, hdr));
341 	if (memcmp((char *)&header->header, "HdrS", 4) != 0) {
342 		pr_err("Not a bzImage\n");
343 		return ret;
344 	}
345 
346 	if (header->boot_flag != 0xAA55) {
347 		pr_err("No x86 boot sector present\n");
348 		return ret;
349 	}
350 
351 	if (header->version < 0x020C) {
352 		pr_err("Must be at least protocol version 2.12\n");
353 		return ret;
354 	}
355 
356 	if (!(header->loadflags & LOADED_HIGH)) {
357 		pr_err("zImage not a bzImage\n");
358 		return ret;
359 	}
360 
361 	if (!(header->xloadflags & XLF_KERNEL_64)) {
362 		pr_err("Not a bzImage64. XLF_KERNEL_64 is not set.\n");
363 		return ret;
364 	}
365 
366 	if (!(header->xloadflags & XLF_CAN_BE_LOADED_ABOVE_4G)) {
367 		pr_err("XLF_CAN_BE_LOADED_ABOVE_4G is not set.\n");
368 		return ret;
369 	}
370 
371 	/*
372 	 * Can't handle 32bit EFI as it does not allow loading kernel
373 	 * above 4G. This should be handled by 32bit bzImage loader
374 	 */
375 	if (efi_enabled(EFI_RUNTIME_SERVICES) && !efi_enabled(EFI_64BIT)) {
376 		pr_debug("EFI is 32 bit. Can't load kernel above 4G.\n");
377 		return ret;
378 	}
379 
380 	if (!(header->xloadflags & XLF_5LEVEL) && pgtable_l5_enabled()) {
381 		pr_err("bzImage cannot handle 5-level paging mode.\n");
382 		return ret;
383 	}
384 
385 	/* I've got a bzImage */
386 	pr_debug("It's a relocatable bzImage64\n");
387 	ret = 0;
388 
389 	return ret;
390 }
391 
392 static void *bzImage64_load(struct kimage *image, char *kernel,
393 			    unsigned long kernel_len, char *initrd,
394 			    unsigned long initrd_len, char *cmdline,
395 			    unsigned long cmdline_len)
396 {
397 
398 	struct setup_header *header;
399 	int setup_sects, kern16_size, ret = 0;
400 	unsigned long setup_header_size, params_cmdline_sz;
401 	struct boot_params *params;
402 	unsigned long bootparam_load_addr, kernel_load_addr, initrd_load_addr;
403 	struct bzimage64_data *ldata;
404 	struct kexec_entry64_regs regs64;
405 	void *stack;
406 	unsigned int setup_hdr_offset = offsetof(struct boot_params, hdr);
407 	unsigned int efi_map_offset, efi_map_sz, efi_setup_data_offset;
408 	struct kexec_buf kbuf = { .image = image, .buf_max = ULONG_MAX,
409 				  .top_down = true };
410 	struct kexec_buf pbuf = { .image = image, .buf_min = MIN_PURGATORY_ADDR,
411 				  .buf_max = ULONG_MAX, .top_down = true };
412 
413 	header = (struct setup_header *)(kernel + setup_hdr_offset);
414 	setup_sects = header->setup_sects;
415 	if (setup_sects == 0)
416 		setup_sects = 4;
417 
418 	kern16_size = (setup_sects + 1) * 512;
419 	if (kernel_len < kern16_size) {
420 		pr_err("bzImage truncated\n");
421 		return ERR_PTR(-ENOEXEC);
422 	}
423 
424 	if (cmdline_len > header->cmdline_size) {
425 		pr_err("Kernel command line too long\n");
426 		return ERR_PTR(-EINVAL);
427 	}
428 
429 	/*
430 	 * In case of crash dump, we will append elfcorehdr=<addr> to
431 	 * command line. Make sure it does not overflow
432 	 */
433 	if (cmdline_len + MAX_ELFCOREHDR_STR_LEN > header->cmdline_size) {
434 		pr_err("Appending elfcorehdr=<addr> to command line exceeds maximum allowed length\n");
435 		return ERR_PTR(-EINVAL);
436 	}
437 
438 #ifdef CONFIG_CRASH_DUMP
439 	/* Allocate and load backup region */
440 	if (image->type == KEXEC_TYPE_CRASH) {
441 		ret = crash_load_segments(image);
442 		if (ret)
443 			return ERR_PTR(ret);
444 	}
445 #endif
446 
447 	/*
448 	 * Load purgatory. For 64bit entry point, purgatory  code can be
449 	 * anywhere.
450 	 */
451 	ret = kexec_load_purgatory(image, &pbuf);
452 	if (ret) {
453 		pr_err("Loading purgatory failed\n");
454 		return ERR_PTR(ret);
455 	}
456 
457 	kexec_dprintk("Loaded purgatory at 0x%lx\n", pbuf.mem);
458 
459 
460 	/*
461 	 * Load Bootparams and cmdline and space for efi stuff.
462 	 *
463 	 * Allocate memory together for multiple data structures so
464 	 * that they all can go in single area/segment and we don't
465 	 * have to create separate segment for each. Keeps things
466 	 * little bit simple
467 	 */
468 	efi_map_sz = efi_get_runtime_map_size();
469 	params_cmdline_sz = sizeof(struct boot_params) + cmdline_len +
470 				MAX_ELFCOREHDR_STR_LEN;
471 	params_cmdline_sz = ALIGN(params_cmdline_sz, 16);
472 	kbuf.bufsz = params_cmdline_sz + ALIGN(efi_map_sz, 16) +
473 				sizeof(struct setup_data) +
474 				sizeof(struct efi_setup_data) +
475 				sizeof(struct setup_data) +
476 				RNG_SEED_LENGTH;
477 
478 	if (IS_ENABLED(CONFIG_IMA_KEXEC))
479 		kbuf.bufsz += sizeof(struct setup_data) +
480 			      sizeof(struct ima_setup_data);
481 
482 	params = kzalloc(kbuf.bufsz, GFP_KERNEL);
483 	if (!params)
484 		return ERR_PTR(-ENOMEM);
485 	efi_map_offset = params_cmdline_sz;
486 	efi_setup_data_offset = efi_map_offset + ALIGN(efi_map_sz, 16);
487 
488 	/* Copy setup header onto bootparams. Documentation/arch/x86/boot.rst */
489 	setup_header_size = 0x0202 + kernel[0x0201] - setup_hdr_offset;
490 
491 	/* Is there a limit on setup header size? */
492 	memcpy(&params->hdr, (kernel + setup_hdr_offset), setup_header_size);
493 
494 	kbuf.buffer = params;
495 	kbuf.memsz = kbuf.bufsz;
496 	kbuf.buf_align = 16;
497 	kbuf.buf_min = MIN_BOOTPARAM_ADDR;
498 	ret = kexec_add_buffer(&kbuf);
499 	if (ret)
500 		goto out_free_params;
501 	bootparam_load_addr = kbuf.mem;
502 	kexec_dprintk("Loaded boot_param, command line and misc at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
503 		      bootparam_load_addr, kbuf.bufsz, kbuf.memsz);
504 
505 	/* Load kernel */
506 	kbuf.buffer = kernel + kern16_size;
507 	kbuf.bufsz =  kernel_len - kern16_size;
508 	kbuf.memsz = PAGE_ALIGN(header->init_size);
509 	kbuf.buf_align = header->kernel_alignment;
510 	if (header->pref_address < MIN_KERNEL_LOAD_ADDR)
511 		kbuf.buf_min = MIN_KERNEL_LOAD_ADDR;
512 	else
513 		kbuf.buf_min = header->pref_address;
514 	kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
515 	ret = kexec_add_buffer(&kbuf);
516 	if (ret)
517 		goto out_free_params;
518 	kernel_load_addr = kbuf.mem;
519 
520 	kexec_dprintk("Loaded 64bit kernel at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
521 		      kernel_load_addr, kbuf.bufsz, kbuf.memsz);
522 
523 	/* Load initrd high */
524 	if (initrd) {
525 		kbuf.buffer = initrd;
526 		kbuf.bufsz = kbuf.memsz = initrd_len;
527 		kbuf.buf_align = PAGE_SIZE;
528 		kbuf.buf_min = MIN_INITRD_LOAD_ADDR;
529 		kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
530 		ret = kexec_add_buffer(&kbuf);
531 		if (ret)
532 			goto out_free_params;
533 		initrd_load_addr = kbuf.mem;
534 
535 		kexec_dprintk("Loaded initrd at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
536 			      initrd_load_addr, initrd_len, initrd_len);
537 
538 		setup_initrd(params, initrd_load_addr, initrd_len);
539 	}
540 
541 	setup_cmdline(image, params, bootparam_load_addr,
542 		      sizeof(struct boot_params), cmdline, cmdline_len);
543 
544 	/* bootloader info. Do we need a separate ID for kexec kernel loader? */
545 	params->hdr.type_of_loader = 0x0D << 4;
546 	params->hdr.loadflags = 0;
547 
548 	/* Setup purgatory regs for entry */
549 	ret = kexec_purgatory_get_set_symbol(image, "entry64_regs", &regs64,
550 					     sizeof(regs64), 1);
551 	if (ret)
552 		goto out_free_params;
553 
554 	regs64.rbx = 0; /* Bootstrap Processor */
555 	regs64.rsi = bootparam_load_addr;
556 	regs64.rip = kernel_load_addr + 0x200;
557 	stack = kexec_purgatory_get_symbol_addr(image, "stack_end");
558 	if (IS_ERR(stack)) {
559 		pr_err("Could not find address of symbol stack_end\n");
560 		ret = -EINVAL;
561 		goto out_free_params;
562 	}
563 
564 	regs64.rsp = (unsigned long)stack;
565 	ret = kexec_purgatory_get_set_symbol(image, "entry64_regs", &regs64,
566 					     sizeof(regs64), 0);
567 	if (ret)
568 		goto out_free_params;
569 
570 	ret = setup_boot_parameters(image, params, bootparam_load_addr,
571 				    efi_map_offset, efi_map_sz,
572 				    efi_setup_data_offset);
573 	if (ret)
574 		goto out_free_params;
575 
576 	/* Allocate loader specific data */
577 	ldata = kzalloc(sizeof(struct bzimage64_data), GFP_KERNEL);
578 	if (!ldata) {
579 		ret = -ENOMEM;
580 		goto out_free_params;
581 	}
582 
583 	/*
584 	 * Store pointer to params so that it could be freed after loading
585 	 * params segment has been loaded and contents have been copied
586 	 * somewhere else.
587 	 */
588 	ldata->bootparams_buf = params;
589 	return ldata;
590 
591 out_free_params:
592 	kfree(params);
593 	return ERR_PTR(ret);
594 }
595 
596 /* This cleanup function is called after various segments have been loaded */
597 static int bzImage64_cleanup(void *loader_data)
598 {
599 	struct bzimage64_data *ldata = loader_data;
600 
601 	if (!ldata)
602 		return 0;
603 
604 	kfree(ldata->bootparams_buf);
605 	ldata->bootparams_buf = NULL;
606 
607 	return 0;
608 }
609 
610 const struct kexec_file_ops kexec_bzImage64_ops = {
611 	.probe = bzImage64_probe,
612 	.load = bzImage64_load,
613 	.cleanup = bzImage64_cleanup,
614 #ifdef CONFIG_KEXEC_BZIMAGE_VERIFY_SIG
615 	.verify_sig = kexec_kernel_verify_pe_sig,
616 #endif
617 };
618