1 // SPDX-License-Identifier: GPL-2.0 2 #include <linux/linkage.h> 3 #include <linux/errno.h> 4 #include <linux/signal.h> 5 #include <linux/sched.h> 6 #include <linux/ioport.h> 7 #include <linux/interrupt.h> 8 #include <linux/irq.h> 9 #include <linux/timex.h> 10 #include <linux/random.h> 11 #include <linux/kprobes.h> 12 #include <linux/init.h> 13 #include <linux/kernel_stat.h> 14 #include <linux/device.h> 15 #include <linux/bitops.h> 16 #include <linux/acpi.h> 17 #include <linux/io.h> 18 #include <linux/delay.h> 19 #include <linux/pgtable.h> 20 21 #include <linux/atomic.h> 22 #include <asm/timer.h> 23 #include <asm/hw_irq.h> 24 #include <asm/desc.h> 25 #include <asm/io_apic.h> 26 #include <asm/acpi.h> 27 #include <asm/apic.h> 28 #include <asm/setup.h> 29 #include <asm/i8259.h> 30 #include <asm/traps.h> 31 #include <asm/prom.h> 32 33 /* 34 * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: 35 * (these are usually mapped to vectors 0x30-0x3f) 36 */ 37 38 /* 39 * The IO-APIC gives us many more interrupt sources. Most of these 40 * are unused but an SMP system is supposed to have enough memory ... 41 * sometimes (mostly wrt. hw bugs) we get corrupted vectors all 42 * across the spectrum, so we really want to be prepared to get all 43 * of these. Plus, more powerful systems might have more than 64 44 * IO-APIC registers. 45 * 46 * (these are usually mapped into the 0x30-0xff vector range) 47 */ 48 49 DEFINE_PER_CPU(vector_irq_t, vector_irq) = { 50 [0 ... NR_VECTORS - 1] = VECTOR_UNUSED, 51 }; 52 53 void __init init_ISA_irqs(void) 54 { 55 struct irq_chip *chip = legacy_pic->chip; 56 int i; 57 58 /* 59 * Try to set up the through-local-APIC virtual wire mode earlier. 60 * 61 * On some 32-bit UP machines, whose APIC has been disabled by BIOS 62 * and then got re-enabled by "lapic", it hangs at boot time without this. 63 */ 64 init_bsp_APIC(); 65 66 legacy_pic->init(0); 67 68 for (i = 0; i < nr_legacy_irqs(); i++) { 69 irq_set_chip_and_handler(i, chip, handle_level_irq); 70 irq_set_status_flags(i, IRQ_LEVEL); 71 } 72 } 73 74 void __init init_IRQ(void) 75 { 76 int i; 77 78 /* 79 * On cpu 0, Assign ISA_IRQ_VECTOR(irq) to IRQ 0..15. 80 * If these IRQ's are handled by legacy interrupt-controllers like PIC, 81 * then this configuration will likely be static after the boot. If 82 * these IRQs are handled by more modern controllers like IO-APIC, 83 * then this vector space can be freed and re-used dynamically as the 84 * irq's migrate etc. 85 */ 86 for (i = 0; i < nr_legacy_irqs(); i++) 87 per_cpu(vector_irq, 0)[ISA_IRQ_VECTOR(i)] = irq_to_desc(i); 88 89 BUG_ON(irq_init_percpu_irqstack(smp_processor_id())); 90 91 x86_init.irqs.intr_init(); 92 } 93 94 void __init native_init_IRQ(void) 95 { 96 /* Execute any quirks before the call gates are initialised: */ 97 x86_init.irqs.pre_vector_init(); 98 99 idt_setup_apic_and_irq_gates(); 100 lapic_assign_system_vectors(); 101 102 if (!acpi_ioapic && !of_ioapic && nr_legacy_irqs()) { 103 /* IRQ2 is cascade interrupt to second interrupt controller */ 104 if (request_irq(2, no_action, IRQF_NO_THREAD, "cascade", NULL)) 105 pr_err("%s: request_irq() failed\n", "cascade"); 106 } 107 } 108