xref: /linux/arch/x86/include/asm/stackprotector.h (revision b85d45947951d23cb22d90caecf4c1eb81342c96)
1 /*
2  * GCC stack protector support.
3  *
4  * Stack protector works by putting predefined pattern at the start of
5  * the stack frame and verifying that it hasn't been overwritten when
6  * returning from the function.  The pattern is called stack canary
7  * and unfortunately gcc requires it to be at a fixed offset from %gs.
8  * On x86_64, the offset is 40 bytes and on x86_32 20 bytes.  x86_64
9  * and x86_32 use segment registers differently and thus handles this
10  * requirement differently.
11  *
12  * On x86_64, %gs is shared by percpu area and stack canary.  All
13  * percpu symbols are zero based and %gs points to the base of percpu
14  * area.  The first occupant of the percpu area is always
15  * irq_stack_union which contains stack_canary at offset 40.  Userland
16  * %gs is always saved and restored on kernel entry and exit using
17  * swapgs, so stack protector doesn't add any complexity there.
18  *
19  * On x86_32, it's slightly more complicated.  As in x86_64, %gs is
20  * used for userland TLS.  Unfortunately, some processors are much
21  * slower at loading segment registers with different value when
22  * entering and leaving the kernel, so the kernel uses %fs for percpu
23  * area and manages %gs lazily so that %gs is switched only when
24  * necessary, usually during task switch.
25  *
26  * As gcc requires the stack canary at %gs:20, %gs can't be managed
27  * lazily if stack protector is enabled, so the kernel saves and
28  * restores userland %gs on kernel entry and exit.  This behavior is
29  * controlled by CONFIG_X86_32_LAZY_GS and accessors are defined in
30  * system.h to hide the details.
31  */
32 
33 #ifndef _ASM_STACKPROTECTOR_H
34 #define _ASM_STACKPROTECTOR_H 1
35 
36 #ifdef CONFIG_CC_STACKPROTECTOR
37 
38 #include <asm/tsc.h>
39 #include <asm/processor.h>
40 #include <asm/percpu.h>
41 #include <asm/desc.h>
42 
43 #include <linux/random.h>
44 #include <linux/sched.h>
45 
46 /*
47  * 24 byte read-only segment initializer for stack canary.  Linker
48  * can't handle the address bit shifting.  Address will be set in
49  * head_32 for boot CPU and setup_per_cpu_areas() for others.
50  */
51 #define GDT_STACK_CANARY_INIT						\
52 	[GDT_ENTRY_STACK_CANARY] = GDT_ENTRY_INIT(0x4090, 0, 0x18),
53 
54 /*
55  * Initialize the stackprotector canary value.
56  *
57  * NOTE: this must only be called from functions that never return,
58  * and it must always be inlined.
59  */
60 static __always_inline void boot_init_stack_canary(void)
61 {
62 	u64 canary;
63 	u64 tsc;
64 
65 #ifdef CONFIG_X86_64
66 	BUILD_BUG_ON(offsetof(union irq_stack_union, stack_canary) != 40);
67 #endif
68 	/*
69 	 * We both use the random pool and the current TSC as a source
70 	 * of randomness. The TSC only matters for very early init,
71 	 * there it already has some randomness on most systems. Later
72 	 * on during the bootup the random pool has true entropy too.
73 	 */
74 	get_random_bytes(&canary, sizeof(canary));
75 	tsc = rdtsc();
76 	canary += tsc + (tsc << 32UL);
77 
78 	current->stack_canary = canary;
79 #ifdef CONFIG_X86_64
80 	this_cpu_write(irq_stack_union.stack_canary, canary);
81 #else
82 	this_cpu_write(stack_canary.canary, canary);
83 #endif
84 }
85 
86 static inline void setup_stack_canary_segment(int cpu)
87 {
88 #ifdef CONFIG_X86_32
89 	unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu);
90 	struct desc_struct *gdt_table = get_cpu_gdt_table(cpu);
91 	struct desc_struct desc;
92 
93 	desc = gdt_table[GDT_ENTRY_STACK_CANARY];
94 	set_desc_base(&desc, canary);
95 	write_gdt_entry(gdt_table, GDT_ENTRY_STACK_CANARY, &desc, DESCTYPE_S);
96 #endif
97 }
98 
99 static inline void load_stack_canary_segment(void)
100 {
101 #ifdef CONFIG_X86_32
102 	asm("mov %0, %%gs" : : "r" (__KERNEL_STACK_CANARY) : "memory");
103 #endif
104 }
105 
106 #else	/* CC_STACKPROTECTOR */
107 
108 #define GDT_STACK_CANARY_INIT
109 
110 /* dummy boot_init_stack_canary() is defined in linux/stackprotector.h */
111 
112 static inline void setup_stack_canary_segment(int cpu)
113 { }
114 
115 static inline void load_stack_canary_segment(void)
116 {
117 #ifdef CONFIG_X86_32
118 	asm volatile ("mov %0, %%gs" : : "r" (0));
119 #endif
120 }
121 
122 #endif	/* CC_STACKPROTECTOR */
123 #endif	/* _ASM_STACKPROTECTOR_H */
124