xref: /linux/arch/x86/include/asm/debugreg.h (revision e6a901a00822659181c93c86d8bbc2a17779fddc)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _ASM_X86_DEBUGREG_H
3 #define _ASM_X86_DEBUGREG_H
4 
5 #include <linux/bug.h>
6 #include <linux/percpu.h>
7 #include <uapi/asm/debugreg.h>
8 
9 #include <asm/cpufeature.h>
10 #include <asm/msr.h>
11 
12 DECLARE_PER_CPU(unsigned long, cpu_dr7);
13 
14 #ifndef CONFIG_PARAVIRT_XXL
15 /*
16  * These special macros can be used to get or set a debugging register
17  */
18 #define get_debugreg(var, register)				\
19 	(var) = native_get_debugreg(register)
20 #define set_debugreg(value, register)				\
21 	native_set_debugreg(register, value)
22 #endif
23 
24 static __always_inline unsigned long native_get_debugreg(int regno)
25 {
26 	unsigned long val = 0;	/* Damn you, gcc! */
27 
28 	switch (regno) {
29 	case 0:
30 		asm("mov %%db0, %0" :"=r" (val));
31 		break;
32 	case 1:
33 		asm("mov %%db1, %0" :"=r" (val));
34 		break;
35 	case 2:
36 		asm("mov %%db2, %0" :"=r" (val));
37 		break;
38 	case 3:
39 		asm("mov %%db3, %0" :"=r" (val));
40 		break;
41 	case 6:
42 		asm("mov %%db6, %0" :"=r" (val));
43 		break;
44 	case 7:
45 		/*
46 		 * Apply __FORCE_ORDER to DR7 reads to forbid re-ordering them
47 		 * with other code.
48 		 *
49 		 * This is needed because a DR7 access can cause a #VC exception
50 		 * when running under SEV-ES. Taking a #VC exception is not a
51 		 * safe thing to do just anywhere in the entry code and
52 		 * re-ordering might place the access into an unsafe location.
53 		 *
54 		 * This happened in the NMI handler, where the DR7 read was
55 		 * re-ordered to happen before the call to sev_es_ist_enter(),
56 		 * causing stack recursion.
57 		 */
58 		asm volatile("mov %%db7, %0" : "=r" (val) : __FORCE_ORDER);
59 		break;
60 	default:
61 		BUG();
62 	}
63 	return val;
64 }
65 
66 static __always_inline void native_set_debugreg(int regno, unsigned long value)
67 {
68 	switch (regno) {
69 	case 0:
70 		asm("mov %0, %%db0"	::"r" (value));
71 		break;
72 	case 1:
73 		asm("mov %0, %%db1"	::"r" (value));
74 		break;
75 	case 2:
76 		asm("mov %0, %%db2"	::"r" (value));
77 		break;
78 	case 3:
79 		asm("mov %0, %%db3"	::"r" (value));
80 		break;
81 	case 6:
82 		asm("mov %0, %%db6"	::"r" (value));
83 		break;
84 	case 7:
85 		/*
86 		 * Apply __FORCE_ORDER to DR7 writes to forbid re-ordering them
87 		 * with other code.
88 		 *
89 		 * While is didn't happen with a DR7 write (see the DR7 read
90 		 * comment above which explains where it happened), add the
91 		 * __FORCE_ORDER here too to avoid similar problems in the
92 		 * future.
93 		 */
94 		asm volatile("mov %0, %%db7"	::"r" (value), __FORCE_ORDER);
95 		break;
96 	default:
97 		BUG();
98 	}
99 }
100 
101 static inline void hw_breakpoint_disable(void)
102 {
103 	/* Zero the control register for HW Breakpoint */
104 	set_debugreg(0UL, 7);
105 
106 	/* Zero-out the individual HW breakpoint address registers */
107 	set_debugreg(0UL, 0);
108 	set_debugreg(0UL, 1);
109 	set_debugreg(0UL, 2);
110 	set_debugreg(0UL, 3);
111 }
112 
113 static __always_inline bool hw_breakpoint_active(void)
114 {
115 	return __this_cpu_read(cpu_dr7) & DR_GLOBAL_ENABLE_MASK;
116 }
117 
118 extern void hw_breakpoint_restore(void);
119 
120 static __always_inline unsigned long local_db_save(void)
121 {
122 	unsigned long dr7;
123 
124 	if (static_cpu_has(X86_FEATURE_HYPERVISOR) && !hw_breakpoint_active())
125 		return 0;
126 
127 	get_debugreg(dr7, 7);
128 	dr7 &= ~0x400; /* architecturally set bit */
129 	if (dr7)
130 		set_debugreg(0, 7);
131 	/*
132 	 * Ensure the compiler doesn't lower the above statements into
133 	 * the critical section; disabling breakpoints late would not
134 	 * be good.
135 	 */
136 	barrier();
137 
138 	return dr7;
139 }
140 
141 static __always_inline void local_db_restore(unsigned long dr7)
142 {
143 	/*
144 	 * Ensure the compiler doesn't raise this statement into
145 	 * the critical section; enabling breakpoints early would
146 	 * not be good.
147 	 */
148 	barrier();
149 	if (dr7)
150 		set_debugreg(dr7, 7);
151 }
152 
153 #ifdef CONFIG_CPU_SUP_AMD
154 extern void amd_set_dr_addr_mask(unsigned long mask, unsigned int dr);
155 extern unsigned long amd_get_dr_addr_mask(unsigned int dr);
156 #else
157 static inline void amd_set_dr_addr_mask(unsigned long mask, unsigned int dr) { }
158 static inline unsigned long amd_get_dr_addr_mask(unsigned int dr)
159 {
160 	return 0;
161 }
162 #endif
163 
164 static inline unsigned long get_debugctlmsr(void)
165 {
166 	unsigned long debugctlmsr = 0;
167 
168 #ifndef CONFIG_X86_DEBUGCTLMSR
169 	if (boot_cpu_data.x86 < 6)
170 		return 0;
171 #endif
172 	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
173 
174 	return debugctlmsr;
175 }
176 
177 static inline void update_debugctlmsr(unsigned long debugctlmsr)
178 {
179 #ifndef CONFIG_X86_DEBUGCTLMSR
180 	if (boot_cpu_data.x86 < 6)
181 		return;
182 #endif
183 	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctlmsr);
184 }
185 
186 #endif /* _ASM_X86_DEBUGREG_H */
187