1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) 4 */ 5 6 #include <linux/mm.h> 7 #include <linux/sched/signal.h> 8 #include <linux/hardirq.h> 9 #include <linux/module.h> 10 #include <linux/uaccess.h> 11 #include <linux/sched/debug.h> 12 #include <asm/current.h> 13 #include <asm/tlbflush.h> 14 #include <arch.h> 15 #include <as-layout.h> 16 #include <kern_util.h> 17 #include <os.h> 18 #include <skas.h> 19 20 /* 21 * Note this is constrained to return 0, -EFAULT, -EACCES, -ENOMEM by 22 * segv(). 23 */ 24 int handle_page_fault(unsigned long address, unsigned long ip, 25 int is_write, int is_user, int *code_out) 26 { 27 struct mm_struct *mm = current->mm; 28 struct vm_area_struct *vma; 29 pmd_t *pmd; 30 pte_t *pte; 31 int err = -EFAULT; 32 unsigned int flags = FAULT_FLAG_DEFAULT; 33 34 *code_out = SEGV_MAPERR; 35 36 /* 37 * If the fault was with pagefaults disabled, don't take the fault, just 38 * fail. 39 */ 40 if (faulthandler_disabled()) 41 goto out_nosemaphore; 42 43 if (is_user) 44 flags |= FAULT_FLAG_USER; 45 retry: 46 mmap_read_lock(mm); 47 vma = find_vma(mm, address); 48 if (!vma) 49 goto out; 50 else if (vma->vm_start <= address) 51 goto good_area; 52 else if (!(vma->vm_flags & VM_GROWSDOWN)) 53 goto out; 54 else if (is_user && !ARCH_IS_STACKGROW(address)) 55 goto out; 56 else if (expand_stack(vma, address)) 57 goto out; 58 59 good_area: 60 *code_out = SEGV_ACCERR; 61 if (is_write) { 62 if (!(vma->vm_flags & VM_WRITE)) 63 goto out; 64 flags |= FAULT_FLAG_WRITE; 65 } else { 66 /* Don't require VM_READ|VM_EXEC for write faults! */ 67 if (!(vma->vm_flags & (VM_READ | VM_EXEC))) 68 goto out; 69 } 70 71 do { 72 vm_fault_t fault; 73 74 fault = handle_mm_fault(vma, address, flags); 75 76 if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) 77 goto out_nosemaphore; 78 79 if (unlikely(fault & VM_FAULT_ERROR)) { 80 if (fault & VM_FAULT_OOM) { 81 goto out_of_memory; 82 } else if (fault & VM_FAULT_SIGSEGV) { 83 goto out; 84 } else if (fault & VM_FAULT_SIGBUS) { 85 err = -EACCES; 86 goto out; 87 } 88 BUG(); 89 } 90 if (flags & FAULT_FLAG_ALLOW_RETRY) { 91 if (fault & VM_FAULT_MAJOR) 92 current->maj_flt++; 93 else 94 current->min_flt++; 95 if (fault & VM_FAULT_RETRY) { 96 flags |= FAULT_FLAG_TRIED; 97 98 goto retry; 99 } 100 } 101 102 pmd = pmd_off(mm, address); 103 pte = pte_offset_kernel(pmd, address); 104 } while (!pte_present(*pte)); 105 err = 0; 106 /* 107 * The below warning was added in place of 108 * pte_mkyoung(); if (is_write) pte_mkdirty(); 109 * If it's triggered, we'd see normally a hang here (a clean pte is 110 * marked read-only to emulate the dirty bit). 111 * However, the generic code can mark a PTE writable but clean on a 112 * concurrent read fault, triggering this harmlessly. So comment it out. 113 */ 114 #if 0 115 WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte))); 116 #endif 117 flush_tlb_page(vma, address); 118 out: 119 mmap_read_unlock(mm); 120 out_nosemaphore: 121 return err; 122 123 out_of_memory: 124 /* 125 * We ran out of memory, call the OOM killer, and return the userspace 126 * (which will retry the fault, or kill us if we got oom-killed). 127 */ 128 mmap_read_unlock(mm); 129 if (!is_user) 130 goto out_nosemaphore; 131 pagefault_out_of_memory(); 132 return 0; 133 } 134 EXPORT_SYMBOL(handle_page_fault); 135 136 static void show_segv_info(struct uml_pt_regs *regs) 137 { 138 struct task_struct *tsk = current; 139 struct faultinfo *fi = UPT_FAULTINFO(regs); 140 141 if (!unhandled_signal(tsk, SIGSEGV)) 142 return; 143 144 if (!printk_ratelimit()) 145 return; 146 147 printk("%s%s[%d]: segfault at %lx ip %px sp %px error %x", 148 task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, 149 tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi), 150 (void *)UPT_IP(regs), (void *)UPT_SP(regs), 151 fi->error_code); 152 153 print_vma_addr(KERN_CONT " in ", UPT_IP(regs)); 154 printk(KERN_CONT "\n"); 155 } 156 157 static void bad_segv(struct faultinfo fi, unsigned long ip) 158 { 159 current->thread.arch.faultinfo = fi; 160 force_sig_fault(SIGSEGV, SEGV_ACCERR, (void __user *) FAULT_ADDRESS(fi)); 161 } 162 163 void fatal_sigsegv(void) 164 { 165 force_sigsegv(SIGSEGV); 166 do_signal(¤t->thread.regs); 167 /* 168 * This is to tell gcc that we're not returning - do_signal 169 * can, in general, return, but in this case, it's not, since 170 * we just got a fatal SIGSEGV queued. 171 */ 172 os_dump_core(); 173 } 174 175 /** 176 * segv_handler() - the SIGSEGV handler 177 * @sig: the signal number 178 * @unused_si: the signal info struct; unused in this handler 179 * @regs: the ptrace register information 180 * 181 * The handler first extracts the faultinfo from the UML ptrace regs struct. 182 * If the userfault did not happen in an UML userspace process, bad_segv is called. 183 * Otherwise the signal did happen in a cloned userspace process, handle it. 184 */ 185 void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs) 186 { 187 struct faultinfo * fi = UPT_FAULTINFO(regs); 188 189 if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) { 190 show_segv_info(regs); 191 bad_segv(*fi, UPT_IP(regs)); 192 return; 193 } 194 segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs); 195 } 196 197 /* 198 * We give a *copy* of the faultinfo in the regs to segv. 199 * This must be done, since nesting SEGVs could overwrite 200 * the info in the regs. A pointer to the info then would 201 * give us bad data! 202 */ 203 unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, 204 struct uml_pt_regs *regs) 205 { 206 jmp_buf *catcher; 207 int si_code; 208 int err; 209 int is_write = FAULT_WRITE(fi); 210 unsigned long address = FAULT_ADDRESS(fi); 211 212 if (!is_user && regs) 213 current->thread.segv_regs = container_of(regs, struct pt_regs, regs); 214 215 if (!is_user && (address >= start_vm) && (address < end_vm)) { 216 flush_tlb_kernel_vm(); 217 goto out; 218 } 219 else if (current->mm == NULL) { 220 show_regs(container_of(regs, struct pt_regs, regs)); 221 panic("Segfault with no mm"); 222 } 223 else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) { 224 show_regs(container_of(regs, struct pt_regs, regs)); 225 panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx", 226 address, ip); 227 } 228 229 if (SEGV_IS_FIXABLE(&fi)) 230 err = handle_page_fault(address, ip, is_write, is_user, 231 &si_code); 232 else { 233 err = -EFAULT; 234 /* 235 * A thread accessed NULL, we get a fault, but CR2 is invalid. 236 * This code is used in __do_copy_from_user() of TT mode. 237 * XXX tt mode is gone, so maybe this isn't needed any more 238 */ 239 address = 0; 240 } 241 242 catcher = current->thread.fault_catcher; 243 if (!err) 244 goto out; 245 else if (catcher != NULL) { 246 current->thread.fault_addr = (void *) address; 247 UML_LONGJMP(catcher, 1); 248 } 249 else if (current->thread.fault_addr != NULL) 250 panic("fault_addr set but no fault catcher"); 251 else if (!is_user && arch_fixup(ip, regs)) 252 goto out; 253 254 if (!is_user) { 255 show_regs(container_of(regs, struct pt_regs, regs)); 256 panic("Kernel mode fault at addr 0x%lx, ip 0x%lx", 257 address, ip); 258 } 259 260 show_segv_info(regs); 261 262 if (err == -EACCES) { 263 current->thread.arch.faultinfo = fi; 264 force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address); 265 } else { 266 BUG_ON(err != -EFAULT); 267 current->thread.arch.faultinfo = fi; 268 force_sig_fault(SIGSEGV, si_code, (void __user *) address); 269 } 270 271 out: 272 if (regs) 273 current->thread.segv_regs = NULL; 274 275 return 0; 276 } 277 278 void relay_signal(int sig, struct siginfo *si, struct uml_pt_regs *regs) 279 { 280 int code, err; 281 if (!UPT_IS_USER(regs)) { 282 if (sig == SIGBUS) 283 printk(KERN_ERR "Bus error - the host /dev/shm or /tmp " 284 "mount likely just ran out of space\n"); 285 panic("Kernel mode signal %d", sig); 286 } 287 288 arch_examine_signal(sig, regs); 289 290 /* Is the signal layout for the signal known? 291 * Signal data must be scrubbed to prevent information leaks. 292 */ 293 code = si->si_code; 294 err = si->si_errno; 295 if ((err == 0) && (siginfo_layout(sig, code) == SIL_FAULT)) { 296 struct faultinfo *fi = UPT_FAULTINFO(regs); 297 current->thread.arch.faultinfo = *fi; 298 force_sig_fault(sig, code, (void __user *)FAULT_ADDRESS(*fi)); 299 } else { 300 printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d) with errno %d\n", 301 sig, code, err); 302 force_sig(sig); 303 } 304 } 305 306 void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs) 307 { 308 if (current->thread.fault_catcher != NULL) 309 UML_LONGJMP(current->thread.fault_catcher, 1); 310 else 311 relay_signal(sig, si, regs); 312 } 313 314 void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs) 315 { 316 do_IRQ(WINCH_IRQ, regs); 317 } 318 319 void trap_init(void) 320 { 321 } 322