xref: /linux/arch/um/kernel/trap.c (revision 165f2d2858013253042809df082b8df7e34e86d7)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
4  */
5 
6 #include <linux/mm.h>
7 #include <linux/sched/signal.h>
8 #include <linux/hardirq.h>
9 #include <linux/module.h>
10 #include <linux/uaccess.h>
11 #include <linux/sched/debug.h>
12 #include <asm/current.h>
13 #include <asm/pgtable.h>
14 #include <asm/tlbflush.h>
15 #include <arch.h>
16 #include <as-layout.h>
17 #include <kern_util.h>
18 #include <os.h>
19 #include <skas.h>
20 
21 /*
22  * Note this is constrained to return 0, -EFAULT, -EACCES, -ENOMEM by
23  * segv().
24  */
25 int handle_page_fault(unsigned long address, unsigned long ip,
26 		      int is_write, int is_user, int *code_out)
27 {
28 	struct mm_struct *mm = current->mm;
29 	struct vm_area_struct *vma;
30 	pgd_t *pgd;
31 	p4d_t *p4d;
32 	pud_t *pud;
33 	pmd_t *pmd;
34 	pte_t *pte;
35 	int err = -EFAULT;
36 	unsigned int flags = FAULT_FLAG_DEFAULT;
37 
38 	*code_out = SEGV_MAPERR;
39 
40 	/*
41 	 * If the fault was with pagefaults disabled, don't take the fault, just
42 	 * fail.
43 	 */
44 	if (faulthandler_disabled())
45 		goto out_nosemaphore;
46 
47 	if (is_user)
48 		flags |= FAULT_FLAG_USER;
49 retry:
50 	down_read(&mm->mmap_sem);
51 	vma = find_vma(mm, address);
52 	if (!vma)
53 		goto out;
54 	else if (vma->vm_start <= address)
55 		goto good_area;
56 	else if (!(vma->vm_flags & VM_GROWSDOWN))
57 		goto out;
58 	else if (is_user && !ARCH_IS_STACKGROW(address))
59 		goto out;
60 	else if (expand_stack(vma, address))
61 		goto out;
62 
63 good_area:
64 	*code_out = SEGV_ACCERR;
65 	if (is_write) {
66 		if (!(vma->vm_flags & VM_WRITE))
67 			goto out;
68 		flags |= FAULT_FLAG_WRITE;
69 	} else {
70 		/* Don't require VM_READ|VM_EXEC for write faults! */
71 		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
72 			goto out;
73 	}
74 
75 	do {
76 		vm_fault_t fault;
77 
78 		fault = handle_mm_fault(vma, address, flags);
79 
80 		if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
81 			goto out_nosemaphore;
82 
83 		if (unlikely(fault & VM_FAULT_ERROR)) {
84 			if (fault & VM_FAULT_OOM) {
85 				goto out_of_memory;
86 			} else if (fault & VM_FAULT_SIGSEGV) {
87 				goto out;
88 			} else if (fault & VM_FAULT_SIGBUS) {
89 				err = -EACCES;
90 				goto out;
91 			}
92 			BUG();
93 		}
94 		if (flags & FAULT_FLAG_ALLOW_RETRY) {
95 			if (fault & VM_FAULT_MAJOR)
96 				current->maj_flt++;
97 			else
98 				current->min_flt++;
99 			if (fault & VM_FAULT_RETRY) {
100 				flags |= FAULT_FLAG_TRIED;
101 
102 				goto retry;
103 			}
104 		}
105 
106 		pgd = pgd_offset(mm, address);
107 		p4d = p4d_offset(pgd, address);
108 		pud = pud_offset(p4d, address);
109 		pmd = pmd_offset(pud, address);
110 		pte = pte_offset_kernel(pmd, address);
111 	} while (!pte_present(*pte));
112 	err = 0;
113 	/*
114 	 * The below warning was added in place of
115 	 *	pte_mkyoung(); if (is_write) pte_mkdirty();
116 	 * If it's triggered, we'd see normally a hang here (a clean pte is
117 	 * marked read-only to emulate the dirty bit).
118 	 * However, the generic code can mark a PTE writable but clean on a
119 	 * concurrent read fault, triggering this harmlessly. So comment it out.
120 	 */
121 #if 0
122 	WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
123 #endif
124 	flush_tlb_page(vma, address);
125 out:
126 	up_read(&mm->mmap_sem);
127 out_nosemaphore:
128 	return err;
129 
130 out_of_memory:
131 	/*
132 	 * We ran out of memory, call the OOM killer, and return the userspace
133 	 * (which will retry the fault, or kill us if we got oom-killed).
134 	 */
135 	up_read(&mm->mmap_sem);
136 	if (!is_user)
137 		goto out_nosemaphore;
138 	pagefault_out_of_memory();
139 	return 0;
140 }
141 EXPORT_SYMBOL(handle_page_fault);
142 
143 static void show_segv_info(struct uml_pt_regs *regs)
144 {
145 	struct task_struct *tsk = current;
146 	struct faultinfo *fi = UPT_FAULTINFO(regs);
147 
148 	if (!unhandled_signal(tsk, SIGSEGV))
149 		return;
150 
151 	if (!printk_ratelimit())
152 		return;
153 
154 	printk("%s%s[%d]: segfault at %lx ip %px sp %px error %x",
155 		task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
156 		tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
157 		(void *)UPT_IP(regs), (void *)UPT_SP(regs),
158 		fi->error_code);
159 
160 	print_vma_addr(KERN_CONT " in ", UPT_IP(regs));
161 	printk(KERN_CONT "\n");
162 }
163 
164 static void bad_segv(struct faultinfo fi, unsigned long ip)
165 {
166 	current->thread.arch.faultinfo = fi;
167 	force_sig_fault(SIGSEGV, SEGV_ACCERR, (void __user *) FAULT_ADDRESS(fi));
168 }
169 
170 void fatal_sigsegv(void)
171 {
172 	force_sigsegv(SIGSEGV);
173 	do_signal(&current->thread.regs);
174 	/*
175 	 * This is to tell gcc that we're not returning - do_signal
176 	 * can, in general, return, but in this case, it's not, since
177 	 * we just got a fatal SIGSEGV queued.
178 	 */
179 	os_dump_core();
180 }
181 
182 /**
183  * segv_handler() - the SIGSEGV handler
184  * @sig:	the signal number
185  * @unused_si:	the signal info struct; unused in this handler
186  * @regs:	the ptrace register information
187  *
188  * The handler first extracts the faultinfo from the UML ptrace regs struct.
189  * If the userfault did not happen in an UML userspace process, bad_segv is called.
190  * Otherwise the signal did happen in a cloned userspace process, handle it.
191  */
192 void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
193 {
194 	struct faultinfo * fi = UPT_FAULTINFO(regs);
195 
196 	if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) {
197 		show_segv_info(regs);
198 		bad_segv(*fi, UPT_IP(regs));
199 		return;
200 	}
201 	segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
202 }
203 
204 /*
205  * We give a *copy* of the faultinfo in the regs to segv.
206  * This must be done, since nesting SEGVs could overwrite
207  * the info in the regs. A pointer to the info then would
208  * give us bad data!
209  */
210 unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
211 		   struct uml_pt_regs *regs)
212 {
213 	jmp_buf *catcher;
214 	int si_code;
215 	int err;
216 	int is_write = FAULT_WRITE(fi);
217 	unsigned long address = FAULT_ADDRESS(fi);
218 
219 	if (!is_user && regs)
220 		current->thread.segv_regs = container_of(regs, struct pt_regs, regs);
221 
222 	if (!is_user && (address >= start_vm) && (address < end_vm)) {
223 		flush_tlb_kernel_vm();
224 		goto out;
225 	}
226 	else if (current->mm == NULL) {
227 		show_regs(container_of(regs, struct pt_regs, regs));
228 		panic("Segfault with no mm");
229 	}
230 	else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) {
231 		show_regs(container_of(regs, struct pt_regs, regs));
232 		panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx",
233 		       address, ip);
234 	}
235 
236 	if (SEGV_IS_FIXABLE(&fi))
237 		err = handle_page_fault(address, ip, is_write, is_user,
238 					&si_code);
239 	else {
240 		err = -EFAULT;
241 		/*
242 		 * A thread accessed NULL, we get a fault, but CR2 is invalid.
243 		 * This code is used in __do_copy_from_user() of TT mode.
244 		 * XXX tt mode is gone, so maybe this isn't needed any more
245 		 */
246 		address = 0;
247 	}
248 
249 	catcher = current->thread.fault_catcher;
250 	if (!err)
251 		goto out;
252 	else if (catcher != NULL) {
253 		current->thread.fault_addr = (void *) address;
254 		UML_LONGJMP(catcher, 1);
255 	}
256 	else if (current->thread.fault_addr != NULL)
257 		panic("fault_addr set but no fault catcher");
258 	else if (!is_user && arch_fixup(ip, regs))
259 		goto out;
260 
261 	if (!is_user) {
262 		show_regs(container_of(regs, struct pt_regs, regs));
263 		panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
264 		      address, ip);
265 	}
266 
267 	show_segv_info(regs);
268 
269 	if (err == -EACCES) {
270 		current->thread.arch.faultinfo = fi;
271 		force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
272 	} else {
273 		BUG_ON(err != -EFAULT);
274 		current->thread.arch.faultinfo = fi;
275 		force_sig_fault(SIGSEGV, si_code, (void __user *) address);
276 	}
277 
278 out:
279 	if (regs)
280 		current->thread.segv_regs = NULL;
281 
282 	return 0;
283 }
284 
285 void relay_signal(int sig, struct siginfo *si, struct uml_pt_regs *regs)
286 {
287 	int code, err;
288 	if (!UPT_IS_USER(regs)) {
289 		if (sig == SIGBUS)
290 			printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
291 			       "mount likely just ran out of space\n");
292 		panic("Kernel mode signal %d", sig);
293 	}
294 
295 	arch_examine_signal(sig, regs);
296 
297 	/* Is the signal layout for the signal known?
298 	 * Signal data must be scrubbed to prevent information leaks.
299 	 */
300 	code = si->si_code;
301 	err = si->si_errno;
302 	if ((err == 0) && (siginfo_layout(sig, code) == SIL_FAULT)) {
303 		struct faultinfo *fi = UPT_FAULTINFO(regs);
304 		current->thread.arch.faultinfo = *fi;
305 		force_sig_fault(sig, code, (void __user *)FAULT_ADDRESS(*fi));
306 	} else {
307 		printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d) with errno %d\n",
308 		       sig, code, err);
309 		force_sig(sig);
310 	}
311 }
312 
313 void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs)
314 {
315 	if (current->thread.fault_catcher != NULL)
316 		UML_LONGJMP(current->thread.fault_catcher, 1);
317 	else
318 		relay_signal(sig, si, regs);
319 }
320 
321 void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
322 {
323 	do_IRQ(WINCH_IRQ, regs);
324 }
325 
326 void trap_init(void)
327 {
328 }
329