1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * leon_pci_grpci1.c: GRPCI1 Host PCI driver 4 * 5 * Copyright (C) 2013 Aeroflex Gaisler AB 6 * 7 * This GRPCI1 driver does not support PCI interrupts taken from 8 * GPIO pins. Interrupt generation at PCI parity and system error 9 * detection is by default turned off since some GRPCI1 cores does 10 * not support detection. It can be turned on from the bootloader 11 * using the all_pci_errors property. 12 * 13 * Contributors: Daniel Hellstrom <daniel@gaisler.com> 14 */ 15 16 #include <linux/export.h> 17 #include <linux/kernel.h> 18 #include <linux/of.h> 19 #include <linux/of_irq.h> 20 #include <linux/platform_device.h> 21 #include <linux/delay.h> 22 #include <linux/pci.h> 23 24 #include <asm/leon_pci.h> 25 #include <asm/sections.h> 26 #include <asm/vaddrs.h> 27 #include <asm/leon.h> 28 #include <asm/io.h> 29 30 #include "irq.h" 31 32 /* Enable/Disable Debugging Configuration Space Access */ 33 #undef GRPCI1_DEBUG_CFGACCESS 34 35 /* 36 * GRPCI1 APB Register MAP 37 */ 38 struct grpci1_regs { 39 unsigned int cfg_stat; /* 0x00 Configuration / Status */ 40 unsigned int bar0; /* 0x04 BAR0 (RO) */ 41 unsigned int page0; /* 0x08 PAGE0 (RO) */ 42 unsigned int bar1; /* 0x0C BAR1 (RO) */ 43 unsigned int page1; /* 0x10 PAGE1 */ 44 unsigned int iomap; /* 0x14 IO Map */ 45 unsigned int stat_cmd; /* 0x18 PCI Status & Command (RO) */ 46 unsigned int irq; /* 0x1C Interrupt register */ 47 }; 48 49 #define REGLOAD(a) (be32_to_cpu(__raw_readl(&(a)))) 50 #define REGSTORE(a, v) (__raw_writel(cpu_to_be32(v), &(a))) 51 52 #define PAGE0_BTEN_BIT 0 53 #define PAGE0_BTEN (1 << PAGE0_BTEN_BIT) 54 55 #define CFGSTAT_HOST_BIT 13 56 #define CFGSTAT_CTO_BIT 8 57 #define CFGSTAT_HOST (1 << CFGSTAT_HOST_BIT) 58 #define CFGSTAT_CTO (1 << CFGSTAT_CTO_BIT) 59 60 #define IRQ_DPE (1 << 9) 61 #define IRQ_SSE (1 << 8) 62 #define IRQ_RMA (1 << 7) 63 #define IRQ_RTA (1 << 6) 64 #define IRQ_STA (1 << 5) 65 #define IRQ_DPED (1 << 4) 66 #define IRQ_INTD (1 << 3) 67 #define IRQ_INTC (1 << 2) 68 #define IRQ_INTB (1 << 1) 69 #define IRQ_INTA (1 << 0) 70 #define IRQ_DEF_ERRORS (IRQ_RMA | IRQ_RTA | IRQ_STA) 71 #define IRQ_ALL_ERRORS (IRQ_DPED | IRQ_DEF_ERRORS | IRQ_SSE | IRQ_DPE) 72 #define IRQ_INTX (IRQ_INTA | IRQ_INTB | IRQ_INTC | IRQ_INTD) 73 #define IRQ_MASK_BIT 16 74 75 #define DEF_PCI_ERRORS (PCI_STATUS_SIG_TARGET_ABORT | \ 76 PCI_STATUS_REC_TARGET_ABORT | \ 77 PCI_STATUS_REC_MASTER_ABORT) 78 #define ALL_PCI_ERRORS (PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY | \ 79 PCI_STATUS_SIG_SYSTEM_ERROR | DEF_PCI_ERRORS) 80 81 #define TGT 256 82 83 struct grpci1_priv { 84 struct leon_pci_info info; /* must be on top of this structure */ 85 struct grpci1_regs __iomem *regs; /* GRPCI register map */ 86 struct device *dev; 87 int pci_err_mask; /* STATUS register error mask */ 88 int irq; /* LEON irqctrl GRPCI IRQ */ 89 unsigned char irq_map[4]; /* GRPCI nexus PCI INTX# IRQs */ 90 unsigned int irq_err; /* GRPCI nexus Virt Error IRQ */ 91 92 /* AHB PCI Windows */ 93 unsigned long pci_area; /* MEMORY */ 94 unsigned long pci_area_end; 95 unsigned long pci_io; /* I/O */ 96 unsigned long pci_conf; /* CONFIGURATION */ 97 unsigned long pci_conf_end; 98 unsigned long pci_io_va; 99 }; 100 101 static struct grpci1_priv *grpci1priv; 102 103 static int grpci1_cfg_w32(struct grpci1_priv *priv, unsigned int bus, 104 unsigned int devfn, int where, u32 val); 105 106 static int grpci1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 107 { 108 struct grpci1_priv *priv = dev->bus->sysdata; 109 int irq_group; 110 111 /* Use default IRQ decoding on PCI BUS0 according slot numbering */ 112 irq_group = slot & 0x3; 113 pin = ((pin - 1) + irq_group) & 0x3; 114 115 return priv->irq_map[pin]; 116 } 117 118 static int grpci1_cfg_r32(struct grpci1_priv *priv, unsigned int bus, 119 unsigned int devfn, int where, u32 *val) 120 { 121 u32 *pci_conf, tmp, cfg; 122 123 if (where & 0x3) 124 return -EINVAL; 125 126 if (bus == 0) { 127 devfn += (0x8 * 6); /* start at AD16=Device0 */ 128 } else if (bus == TGT) { 129 bus = 0; 130 devfn = 0; /* special case: bridge controller itself */ 131 } 132 133 /* Select bus */ 134 cfg = REGLOAD(priv->regs->cfg_stat); 135 REGSTORE(priv->regs->cfg_stat, (cfg & ~(0xf << 23)) | (bus << 23)); 136 137 /* do read access */ 138 pci_conf = (u32 *) (priv->pci_conf | (devfn << 8) | (where & 0xfc)); 139 tmp = LEON3_BYPASS_LOAD_PA(pci_conf); 140 141 /* check if master abort was received */ 142 if (REGLOAD(priv->regs->cfg_stat) & CFGSTAT_CTO) { 143 *val = 0xffffffff; 144 /* Clear Master abort bit in PCI cfg space (is set) */ 145 tmp = REGLOAD(priv->regs->stat_cmd); 146 grpci1_cfg_w32(priv, TGT, 0, PCI_COMMAND, tmp); 147 } else { 148 /* Bus always little endian (unaffected by byte-swapping) */ 149 *val = swab32(tmp); 150 } 151 152 return 0; 153 } 154 155 static int grpci1_cfg_r16(struct grpci1_priv *priv, unsigned int bus, 156 unsigned int devfn, int where, u32 *val) 157 { 158 u32 v; 159 int ret; 160 161 if (where & 0x1) 162 return -EINVAL; 163 ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v); 164 *val = 0xffff & (v >> (8 * (where & 0x3))); 165 return ret; 166 } 167 168 static int grpci1_cfg_r8(struct grpci1_priv *priv, unsigned int bus, 169 unsigned int devfn, int where, u32 *val) 170 { 171 u32 v; 172 int ret; 173 174 ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v); 175 *val = 0xff & (v >> (8 * (where & 3))); 176 177 return ret; 178 } 179 180 static int grpci1_cfg_w32(struct grpci1_priv *priv, unsigned int bus, 181 unsigned int devfn, int where, u32 val) 182 { 183 unsigned int *pci_conf; 184 u32 cfg; 185 186 if (where & 0x3) 187 return -EINVAL; 188 189 if (bus == 0) { 190 devfn += (0x8 * 6); /* start at AD16=Device0 */ 191 } else if (bus == TGT) { 192 bus = 0; 193 devfn = 0; /* special case: bridge controller itself */ 194 } 195 196 /* Select bus */ 197 cfg = REGLOAD(priv->regs->cfg_stat); 198 REGSTORE(priv->regs->cfg_stat, (cfg & ~(0xf << 23)) | (bus << 23)); 199 200 pci_conf = (unsigned int *) (priv->pci_conf | 201 (devfn << 8) | (where & 0xfc)); 202 LEON3_BYPASS_STORE_PA(pci_conf, swab32(val)); 203 204 return 0; 205 } 206 207 static int grpci1_cfg_w16(struct grpci1_priv *priv, unsigned int bus, 208 unsigned int devfn, int where, u32 val) 209 { 210 int ret; 211 u32 v; 212 213 if (where & 0x1) 214 return -EINVAL; 215 ret = grpci1_cfg_r32(priv, bus, devfn, where&~3, &v); 216 if (ret) 217 return ret; 218 v = (v & ~(0xffff << (8 * (where & 0x3)))) | 219 ((0xffff & val) << (8 * (where & 0x3))); 220 return grpci1_cfg_w32(priv, bus, devfn, where & ~0x3, v); 221 } 222 223 static int grpci1_cfg_w8(struct grpci1_priv *priv, unsigned int bus, 224 unsigned int devfn, int where, u32 val) 225 { 226 int ret; 227 u32 v; 228 229 ret = grpci1_cfg_r32(priv, bus, devfn, where & ~0x3, &v); 230 if (ret != 0) 231 return ret; 232 v = (v & ~(0xff << (8 * (where & 0x3)))) | 233 ((0xff & val) << (8 * (where & 0x3))); 234 return grpci1_cfg_w32(priv, bus, devfn, where & ~0x3, v); 235 } 236 237 /* Read from Configuration Space. When entering here the PCI layer has taken 238 * the pci_lock spinlock and IRQ is off. 239 */ 240 static int grpci1_read_config(struct pci_bus *bus, unsigned int devfn, 241 int where, int size, u32 *val) 242 { 243 struct grpci1_priv *priv = grpci1priv; 244 unsigned int busno = bus->number; 245 int ret; 246 247 if (PCI_SLOT(devfn) > 15 || busno > 15) { 248 *val = ~0; 249 return 0; 250 } 251 252 switch (size) { 253 case 1: 254 ret = grpci1_cfg_r8(priv, busno, devfn, where, val); 255 break; 256 case 2: 257 ret = grpci1_cfg_r16(priv, busno, devfn, where, val); 258 break; 259 case 4: 260 ret = grpci1_cfg_r32(priv, busno, devfn, where, val); 261 break; 262 default: 263 ret = -EINVAL; 264 break; 265 } 266 267 #ifdef GRPCI1_DEBUG_CFGACCESS 268 printk(KERN_INFO 269 "grpci1_read_config: [%02x:%02x:%x] ofs=%d val=%x size=%d\n", 270 busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, *val, size); 271 #endif 272 273 return ret; 274 } 275 276 /* Write to Configuration Space. When entering here the PCI layer has taken 277 * the pci_lock spinlock and IRQ is off. 278 */ 279 static int grpci1_write_config(struct pci_bus *bus, unsigned int devfn, 280 int where, int size, u32 val) 281 { 282 struct grpci1_priv *priv = grpci1priv; 283 unsigned int busno = bus->number; 284 285 if (PCI_SLOT(devfn) > 15 || busno > 15) 286 return 0; 287 288 #ifdef GRPCI1_DEBUG_CFGACCESS 289 printk(KERN_INFO 290 "grpci1_write_config: [%02x:%02x:%x] ofs=%d size=%d val=%x\n", 291 busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val); 292 #endif 293 294 switch (size) { 295 default: 296 return -EINVAL; 297 case 1: 298 return grpci1_cfg_w8(priv, busno, devfn, where, val); 299 case 2: 300 return grpci1_cfg_w16(priv, busno, devfn, where, val); 301 case 4: 302 return grpci1_cfg_w32(priv, busno, devfn, where, val); 303 } 304 } 305 306 static struct pci_ops grpci1_ops = { 307 .read = grpci1_read_config, 308 .write = grpci1_write_config, 309 }; 310 311 /* GENIRQ IRQ chip implementation for grpci1 irqmode=0..2. In configuration 312 * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller 313 * this is not needed and the standard IRQ controller can be used. 314 */ 315 316 static void grpci1_mask_irq(struct irq_data *data) 317 { 318 u32 irqidx; 319 struct grpci1_priv *priv = grpci1priv; 320 321 irqidx = (u32)data->chip_data - 1; 322 if (irqidx > 3) /* only mask PCI interrupts here */ 323 return; 324 irqidx += IRQ_MASK_BIT; 325 326 REGSTORE(priv->regs->irq, REGLOAD(priv->regs->irq) & ~(1 << irqidx)); 327 } 328 329 static void grpci1_unmask_irq(struct irq_data *data) 330 { 331 u32 irqidx; 332 struct grpci1_priv *priv = grpci1priv; 333 334 irqidx = (u32)data->chip_data - 1; 335 if (irqidx > 3) /* only unmask PCI interrupts here */ 336 return; 337 irqidx += IRQ_MASK_BIT; 338 339 REGSTORE(priv->regs->irq, REGLOAD(priv->regs->irq) | (1 << irqidx)); 340 } 341 342 static unsigned int grpci1_startup_irq(struct irq_data *data) 343 { 344 grpci1_unmask_irq(data); 345 return 0; 346 } 347 348 static void grpci1_shutdown_irq(struct irq_data *data) 349 { 350 grpci1_mask_irq(data); 351 } 352 353 static struct irq_chip grpci1_irq = { 354 .name = "grpci1", 355 .irq_startup = grpci1_startup_irq, 356 .irq_shutdown = grpci1_shutdown_irq, 357 .irq_mask = grpci1_mask_irq, 358 .irq_unmask = grpci1_unmask_irq, 359 }; 360 361 /* Handle one or multiple IRQs from the PCI core */ 362 static void grpci1_pci_flow_irq(struct irq_desc *desc) 363 { 364 struct grpci1_priv *priv = grpci1priv; 365 int i, ack = 0; 366 unsigned int irqreg; 367 368 irqreg = REGLOAD(priv->regs->irq); 369 irqreg = (irqreg >> IRQ_MASK_BIT) & irqreg; 370 371 /* Error Interrupt? */ 372 if (irqreg & IRQ_ALL_ERRORS) { 373 generic_handle_irq(priv->irq_err); 374 ack = 1; 375 } 376 377 /* PCI Interrupt? */ 378 if (irqreg & IRQ_INTX) { 379 /* Call respective PCI Interrupt handler */ 380 for (i = 0; i < 4; i++) { 381 if (irqreg & (1 << i)) 382 generic_handle_irq(priv->irq_map[i]); 383 } 384 ack = 1; 385 } 386 387 /* 388 * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ 389 * Controller, this must be done after IRQ sources have been handled to 390 * avoid double IRQ generation 391 */ 392 if (ack) 393 desc->irq_data.chip->irq_eoi(&desc->irq_data); 394 } 395 396 /* Create a virtual IRQ */ 397 static unsigned int grpci1_build_device_irq(unsigned int irq) 398 { 399 unsigned int virq = 0, pil; 400 401 pil = 1 << 8; 402 virq = irq_alloc(irq, pil); 403 if (virq == 0) 404 goto out; 405 406 irq_set_chip_and_handler_name(virq, &grpci1_irq, handle_simple_irq, 407 "pcilvl"); 408 irq_set_chip_data(virq, (void *)irq); 409 410 out: 411 return virq; 412 } 413 414 /* 415 * Initialize mappings AMBA<->PCI, clear IRQ state, setup PCI interface 416 * 417 * Target BARs: 418 * BAR0: unused in this implementation 419 * BAR1: peripheral DMA to host's memory (size at least 256MByte) 420 * BAR2..BAR5: not implemented in hardware 421 */ 422 static void grpci1_hw_init(struct grpci1_priv *priv) 423 { 424 u32 ahbadr, bar_sz, data, pciadr; 425 struct grpci1_regs __iomem *regs = priv->regs; 426 427 /* set 1:1 mapping between AHB -> PCI memory space */ 428 REGSTORE(regs->cfg_stat, priv->pci_area & 0xf0000000); 429 430 /* map PCI accesses to target BAR1 to Linux kernel memory 1:1 */ 431 ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN((unsigned long) &_end)); 432 REGSTORE(regs->page1, ahbadr); 433 434 /* translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */ 435 REGSTORE(regs->iomap, REGLOAD(regs->iomap) & 0x0000ffff); 436 437 /* disable and clear pending interrupts */ 438 REGSTORE(regs->irq, 0); 439 440 /* Setup BAR0 outside access range so that it does not conflict with 441 * peripheral DMA. There is no need to set up the PAGE0 register. 442 */ 443 grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0, 0xffffffff); 444 grpci1_cfg_r32(priv, TGT, 0, PCI_BASE_ADDRESS_0, &bar_sz); 445 bar_sz = ~bar_sz + 1; 446 pciadr = priv->pci_area - bar_sz; 447 grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_0, pciadr); 448 449 /* 450 * Setup the Host's PCI Target BAR1 for other peripherals to access, 451 * and do DMA to the host's memory. 452 */ 453 grpci1_cfg_w32(priv, TGT, 0, PCI_BASE_ADDRESS_1, ahbadr); 454 455 /* 456 * Setup Latency Timer and cache line size. Default cache line 457 * size will result in poor performance (256 word fetches), 0xff 458 * will set it according to the max size of the PCI FIFO. 459 */ 460 grpci1_cfg_w8(priv, TGT, 0, PCI_CACHE_LINE_SIZE, 0xff); 461 grpci1_cfg_w8(priv, TGT, 0, PCI_LATENCY_TIMER, 0x40); 462 463 /* set as bus master, enable pci memory responses, clear status bits */ 464 grpci1_cfg_r32(priv, TGT, 0, PCI_COMMAND, &data); 465 data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); 466 grpci1_cfg_w32(priv, TGT, 0, PCI_COMMAND, data); 467 } 468 469 static irqreturn_t grpci1_jump_interrupt(int irq, void *arg) 470 { 471 struct grpci1_priv *priv = arg; 472 dev_err(priv->dev, "Jump IRQ happened\n"); 473 return IRQ_NONE; 474 } 475 476 /* Handle GRPCI1 Error Interrupt */ 477 static irqreturn_t grpci1_err_interrupt(int irq, void *arg) 478 { 479 struct grpci1_priv *priv = arg; 480 u32 status; 481 482 grpci1_cfg_r16(priv, TGT, 0, PCI_STATUS, &status); 483 status &= priv->pci_err_mask; 484 485 if (status == 0) 486 return IRQ_NONE; 487 488 if (status & PCI_STATUS_PARITY) 489 dev_err(priv->dev, "Data Parity Error\n"); 490 491 if (status & PCI_STATUS_SIG_TARGET_ABORT) 492 dev_err(priv->dev, "Signalled Target Abort\n"); 493 494 if (status & PCI_STATUS_REC_TARGET_ABORT) 495 dev_err(priv->dev, "Received Target Abort\n"); 496 497 if (status & PCI_STATUS_REC_MASTER_ABORT) 498 dev_err(priv->dev, "Received Master Abort\n"); 499 500 if (status & PCI_STATUS_SIG_SYSTEM_ERROR) 501 dev_err(priv->dev, "Signalled System Error\n"); 502 503 if (status & PCI_STATUS_DETECTED_PARITY) 504 dev_err(priv->dev, "Parity Error\n"); 505 506 /* Clear handled INT TYPE IRQs */ 507 grpci1_cfg_w16(priv, TGT, 0, PCI_STATUS, status); 508 509 return IRQ_HANDLED; 510 } 511 512 static int grpci1_of_probe(struct platform_device *ofdev) 513 { 514 struct grpci1_regs __iomem *regs; 515 struct grpci1_priv *priv; 516 int err, len; 517 const int *tmp; 518 u32 cfg, size, err_mask; 519 struct resource *res; 520 521 if (grpci1priv) { 522 dev_err(&ofdev->dev, "only one GRPCI1 supported\n"); 523 return -ENODEV; 524 } 525 526 if (ofdev->num_resources < 3) { 527 dev_err(&ofdev->dev, "not enough APB/AHB resources\n"); 528 return -EIO; 529 } 530 531 priv = devm_kzalloc(&ofdev->dev, sizeof(*priv), GFP_KERNEL); 532 if (!priv) { 533 dev_err(&ofdev->dev, "memory allocation failed\n"); 534 return -ENOMEM; 535 } 536 platform_set_drvdata(ofdev, priv); 537 priv->dev = &ofdev->dev; 538 539 /* find device register base address */ 540 res = platform_get_resource(ofdev, IORESOURCE_MEM, 0); 541 regs = devm_ioremap_resource(&ofdev->dev, res); 542 if (IS_ERR(regs)) 543 return PTR_ERR(regs); 544 545 /* 546 * check that we're in Host Slot and that we can act as a Host Bridge 547 * and not only as target/peripheral. 548 */ 549 cfg = REGLOAD(regs->cfg_stat); 550 if ((cfg & CFGSTAT_HOST) == 0) { 551 dev_err(&ofdev->dev, "not in host system slot\n"); 552 return -EIO; 553 } 554 555 /* check that BAR1 support 256 MByte so that we can map kernel space */ 556 REGSTORE(regs->page1, 0xffffffff); 557 size = ~REGLOAD(regs->page1) + 1; 558 if (size < 0x10000000) { 559 dev_err(&ofdev->dev, "BAR1 must be at least 256MByte\n"); 560 return -EIO; 561 } 562 563 /* hardware must support little-endian PCI (byte-twisting) */ 564 if ((REGLOAD(regs->page0) & PAGE0_BTEN) == 0) { 565 dev_err(&ofdev->dev, "byte-twisting is required\n"); 566 return -EIO; 567 } 568 569 priv->regs = regs; 570 priv->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); 571 dev_info(&ofdev->dev, "host found at 0x%p, irq%d\n", regs, priv->irq); 572 573 /* Find PCI Memory, I/O and Configuration Space Windows */ 574 priv->pci_area = ofdev->resource[1].start; 575 priv->pci_area_end = ofdev->resource[1].end+1; 576 priv->pci_io = ofdev->resource[2].start; 577 priv->pci_conf = ofdev->resource[2].start + 0x10000; 578 priv->pci_conf_end = priv->pci_conf + 0x10000; 579 priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000); 580 if (!priv->pci_io_va) { 581 dev_err(&ofdev->dev, "unable to map PCI I/O area\n"); 582 return -EIO; 583 } 584 585 printk(KERN_INFO 586 "GRPCI1: MEMORY SPACE [0x%08lx - 0x%08lx]\n" 587 " I/O SPACE [0x%08lx - 0x%08lx]\n" 588 " CONFIG SPACE [0x%08lx - 0x%08lx]\n", 589 priv->pci_area, priv->pci_area_end-1, 590 priv->pci_io, priv->pci_conf-1, 591 priv->pci_conf, priv->pci_conf_end-1); 592 593 /* 594 * I/O Space resources in I/O Window mapped into Virtual Adr Space 595 * We never use low 4KB because some devices seem have problems using 596 * address 0. 597 */ 598 priv->info.io_space.name = "GRPCI1 PCI I/O Space"; 599 priv->info.io_space.start = priv->pci_io_va + 0x1000; 600 priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1; 601 priv->info.io_space.flags = IORESOURCE_IO; 602 603 /* 604 * grpci1 has no prefetchable memory, map everything as 605 * non-prefetchable memory 606 */ 607 priv->info.mem_space.name = "GRPCI1 PCI MEM Space"; 608 priv->info.mem_space.start = priv->pci_area; 609 priv->info.mem_space.end = priv->pci_area_end - 1; 610 priv->info.mem_space.flags = IORESOURCE_MEM; 611 612 if (request_resource(&iomem_resource, &priv->info.mem_space) < 0) { 613 dev_err(&ofdev->dev, "unable to request PCI memory area\n"); 614 err = -ENOMEM; 615 goto err1; 616 } 617 618 if (request_resource(&ioport_resource, &priv->info.io_space) < 0) { 619 dev_err(&ofdev->dev, "unable to request PCI I/O area\n"); 620 err = -ENOMEM; 621 goto err2; 622 } 623 624 /* setup maximum supported PCI buses */ 625 priv->info.busn.name = "GRPCI1 busn"; 626 priv->info.busn.start = 0; 627 priv->info.busn.end = 15; 628 629 grpci1priv = priv; 630 631 /* Initialize hardware */ 632 grpci1_hw_init(priv); 633 634 /* 635 * Get PCI Interrupt to System IRQ mapping and setup IRQ handling 636 * Error IRQ. All PCI and PCI-Error interrupts are shared using the 637 * same system IRQ. 638 */ 639 leon_update_virq_handling(priv->irq, grpci1_pci_flow_irq, "pcilvl", 0); 640 641 priv->irq_map[0] = grpci1_build_device_irq(1); 642 priv->irq_map[1] = grpci1_build_device_irq(2); 643 priv->irq_map[2] = grpci1_build_device_irq(3); 644 priv->irq_map[3] = grpci1_build_device_irq(4); 645 priv->irq_err = grpci1_build_device_irq(5); 646 647 printk(KERN_INFO " PCI INTA..D#: IRQ%d, IRQ%d, IRQ%d, IRQ%d\n", 648 priv->irq_map[0], priv->irq_map[1], priv->irq_map[2], 649 priv->irq_map[3]); 650 651 /* Enable IRQs on LEON IRQ controller */ 652 err = devm_request_irq(&ofdev->dev, priv->irq, grpci1_jump_interrupt, 0, 653 "GRPCI1_JUMP", priv); 654 if (err) { 655 dev_err(&ofdev->dev, "ERR IRQ request failed: %d\n", err); 656 goto err3; 657 } 658 659 /* Setup IRQ handler for access errors */ 660 err = devm_request_irq(&ofdev->dev, priv->irq_err, 661 grpci1_err_interrupt, IRQF_SHARED, "GRPCI1_ERR", 662 priv); 663 if (err) { 664 dev_err(&ofdev->dev, "ERR VIRQ request failed: %d\n", err); 665 goto err3; 666 } 667 668 tmp = of_get_property(ofdev->dev.of_node, "all_pci_errors", &len); 669 if (tmp && (len == 4)) { 670 priv->pci_err_mask = ALL_PCI_ERRORS; 671 err_mask = IRQ_ALL_ERRORS << IRQ_MASK_BIT; 672 } else { 673 priv->pci_err_mask = DEF_PCI_ERRORS; 674 err_mask = IRQ_DEF_ERRORS << IRQ_MASK_BIT; 675 } 676 677 /* 678 * Enable Error Interrupts. PCI interrupts are unmasked once request_irq 679 * is called by the PCI Device drivers 680 */ 681 REGSTORE(regs->irq, err_mask); 682 683 /* Init common layer and scan buses */ 684 priv->info.ops = &grpci1_ops; 685 priv->info.map_irq = grpci1_map_irq; 686 leon_pci_init(ofdev, &priv->info); 687 688 return 0; 689 690 err3: 691 release_resource(&priv->info.io_space); 692 err2: 693 release_resource(&priv->info.mem_space); 694 err1: 695 iounmap((void __iomem *)priv->pci_io_va); 696 grpci1priv = NULL; 697 return err; 698 } 699 700 static const struct of_device_id grpci1_of_match[] = { 701 { 702 .name = "GAISLER_PCIFBRG", 703 }, 704 { 705 .name = "01_014", 706 }, 707 {}, 708 }; 709 710 static struct platform_driver grpci1_of_driver = { 711 .driver = { 712 .name = "grpci1", 713 .of_match_table = grpci1_of_match, 714 }, 715 .probe = grpci1_of_probe, 716 }; 717 718 static int __init grpci1_init(void) 719 { 720 return platform_driver_register(&grpci1_of_driver); 721 } 722 723 subsys_initcall(grpci1_init); 724