1menu "Board support" 2 3config SOLUTION_ENGINE 4 bool 5 6config SH_ALPHA_BOARD 7 bool 8 9config SH_DEVICE_TREE 10 bool "Board Described by Device Tree" 11 select OF 12 select OF_EARLY_FLATTREE 13 select TIMER_OF 14 select COMMON_CLK 15 select GENERIC_CALIBRATE_DELAY 16 help 17 Select Board Described by Device Tree to build a kernel that 18 does not hard-code any board-specific knowledge but instead uses 19 a device tree blob provided by the boot-loader. You must enable 20 drivers for any hardware you want to use separately. At this 21 time, only boards based on the open-hardware J-Core processors 22 have sufficient driver coverage to use this option; do not 23 select it if you are using original SuperH hardware. 24 25config SH_JCORE_SOC 26 bool "J-Core SoC" 27 depends on SH_DEVICE_TREE && (CPU_SH2 || CPU_J2) 28 select CLKSRC_JCORE_PIT 29 select JCORE_AIC 30 default y if CPU_J2 31 help 32 Select this option to include drivers core components of the 33 J-Core SoC, including interrupt controllers and timers. 34 35config SH_SOLUTION_ENGINE 36 bool "SolutionEngine" 37 select SOLUTION_ENGINE 38 select CPU_HAS_IPR_IRQ 39 depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ 40 CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ 41 CPU_SUBTYPE_SH7750R 42 help 43 Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, 44 SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. 45 46config SH_7206_SOLUTION_ENGINE 47 bool "SolutionEngine7206" 48 select SOLUTION_ENGINE 49 depends on CPU_SUBTYPE_SH7206 50 help 51 Select 7206 SolutionEngine if configuring for a Hitachi SH7206 52 evaluation board. 53 54config SH_7619_SOLUTION_ENGINE 55 bool "SolutionEngine7619" 56 select SOLUTION_ENGINE 57 depends on CPU_SUBTYPE_SH7619 58 help 59 Select 7619 SolutionEngine if configuring for a Hitachi SH7619 60 evaluation board. 61 62config SH_7721_SOLUTION_ENGINE 63 bool "SolutionEngine7721" 64 select SOLUTION_ENGINE 65 depends on CPU_SUBTYPE_SH7721 66 help 67 Select 7721 SolutionEngine if configuring for a Hitachi SH7721 68 evaluation board. 69 70config SH_7722_SOLUTION_ENGINE 71 bool "SolutionEngine7722" 72 select SOLUTION_ENGINE 73 select GENERIC_IRQ_CHIP 74 select IRQ_DOMAIN 75 depends on CPU_SUBTYPE_SH7722 76 help 77 Select 7722 SolutionEngine if configuring for a Hitachi SH772 78 evaluation board. 79 80config SH_7724_SOLUTION_ENGINE 81 bool "SolutionEngine7724" 82 select SOLUTION_ENGINE 83 depends on CPU_SUBTYPE_SH7724 84 select GPIOLIB 85 select SND_SOC_AK4642 if SND_SIMPLE_CARD 86 select REGULATOR_FIXED_VOLTAGE if REGULATOR 87 help 88 Select 7724 SolutionEngine if configuring for a Hitachi SH7724 89 evaluation board. 90 91config SH_7751_SOLUTION_ENGINE 92 bool "SolutionEngine7751" 93 select SOLUTION_ENGINE 94 select CPU_HAS_IPR_IRQ 95 depends on CPU_SUBTYPE_SH7751 96 help 97 Select 7751 SolutionEngine if configuring for a Hitachi SH7751 98 evaluation board. 99 100config SH_7780_SOLUTION_ENGINE 101 bool "SolutionEngine7780" 102 select SOLUTION_ENGINE 103 select SYS_SUPPORTS_PCI 104 depends on CPU_SUBTYPE_SH7780 105 help 106 Select 7780 SolutionEngine if configuring for a Renesas SH7780 107 evaluation board. 108 109config SH_7343_SOLUTION_ENGINE 110 bool "SolutionEngine7343" 111 select SOLUTION_ENGINE 112 select GENERIC_IRQ_CHIP 113 select IRQ_DOMAIN 114 depends on CPU_SUBTYPE_SH7343 115 help 116 Select 7343 SolutionEngine if configuring for a Hitachi 117 SH7343 (SH-Mobile 3AS) evaluation board. 118 119config SH_HP6XX 120 bool "HP6XX" 121 select SYS_SUPPORTS_APM_EMULATION 122 select HD6446X_SERIES 123 depends on CPU_SUBTYPE_SH7709 124 help 125 Select HP6XX if configuring for a HP jornada HP6xx. 126 More information (hardware only) at 127 <http://www.hp.com/jornada/>. 128 129config SH_DREAMCAST 130 bool "Dreamcast" 131 select SYS_SUPPORTS_PCI 132 depends on CPU_SUBTYPE_SH7091 133 help 134 Select Dreamcast if configuring for a SEGA Dreamcast. 135 More information at <http://www.linux-sh.org> 136 137config SH_SH03 138 bool "Interface CTP/PCI-SH03" 139 depends on CPU_SUBTYPE_SH7751 140 select CPU_HAS_IPR_IRQ 141 select SYS_SUPPORTS_PCI 142 help 143 CTP/PCI-SH03 is a CPU module computer that is produced 144 by Interface Corporation. 145 More information at <http://www.interface.co.jp> 146 147config SH_SECUREEDGE5410 148 bool "SecureEdge5410" 149 depends on CPU_SUBTYPE_SH7751R 150 select CPU_HAS_IPR_IRQ 151 select SYS_SUPPORTS_PCI 152 help 153 Select SecureEdge5410 if configuring for a SnapGear SH board. 154 This includes both the OEM SecureEdge products as well as the 155 SME product line. 156 157config SH_RTS7751R2D 158 bool "RTS7751R2D" 159 depends on CPU_SUBTYPE_SH7751R 160 select SYS_SUPPORTS_PCI 161 select IO_TRAPPED if MMU 162 help 163 Select RTS7751R2D if configuring for a Renesas Technology 164 Sales SH-Graphics board. 165 166config SH_RSK 167 bool "Renesas Starter Kit" 168 depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ 169 CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 170 select REGULATOR_FIXED_VOLTAGE if REGULATOR 171 help 172 Select this option if configuring for any of the RSK+ MCU 173 evaluation platforms. 174 175config SH_SDK7780 176 bool "SDK7780R3" 177 depends on CPU_SUBTYPE_SH7780 178 select SYS_SUPPORTS_PCI 179 help 180 Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 181 evaluation board. 182 183config SH_SDK7786 184 bool "SDK7786" 185 depends on CPU_SUBTYPE_SH7786 186 select SYS_SUPPORTS_PCI 187 select NO_IOPORT_MAP if !PCI 188 select HAVE_SRAM_POOL 189 select REGULATOR_FIXED_VOLTAGE if REGULATOR 190 help 191 Select SDK7786 if configuring for a Renesas Technology Europe 192 SH7786-65nm board. 193 194config SH_HIGHLANDER 195 bool "Highlander" 196 depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 197 select SYS_SUPPORTS_PCI 198 select IO_TRAPPED if MMU 199 200config SH_SH7757LCR 201 bool "SH7757LCR" 202 depends on CPU_SUBTYPE_SH7757 203 select GPIOLIB 204 select REGULATOR_FIXED_VOLTAGE if REGULATOR 205 206config SH_SH7785LCR 207 bool "SH7785LCR" 208 depends on CPU_SUBTYPE_SH7785 209 select SYS_SUPPORTS_PCI 210 211config SH_SH7785LCR_29BIT_PHYSMAPS 212 bool "SH7785LCR 29bit physmaps" 213 depends on SH_SH7785LCR && 29BIT 214 default y 215 help 216 This board has 2 physical memory maps. It can be changed with 217 DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, 218 you can access all on-board device in 29bit address mode. 219 220config SH_SH7785LCR_PT 221 bool "SH7785LCR prototype board on 32-bit MMU mode" 222 depends on SH_SH7785LCR && 32BIT 223 default n 224 help 225 If you use prototype board, this option is enabled. 226 227config SH_URQUELL 228 bool "Urquell" 229 depends on CPU_SUBTYPE_SH7786 230 select GPIOLIB 231 select SYS_SUPPORTS_PCI 232 select NO_IOPORT_MAP if !PCI 233 234config SH_MIGOR 235 bool "Migo-R" 236 depends on CPU_SUBTYPE_SH7722 237 select GPIOLIB 238 select REGULATOR_FIXED_VOLTAGE if REGULATOR 239 help 240 Select Migo-R if configuring for the SH7722 Migo-R platform 241 by Renesas System Solutions Asia Pte. Ltd. 242 243config SH_AP325RXA 244 bool "AP-325RXA" 245 depends on CPU_SUBTYPE_SH7723 246 select GPIOLIB 247 select REGULATOR_FIXED_VOLTAGE if REGULATOR 248 help 249 Renesas "AP-325RXA" support. 250 Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" 251 252config SH_KFR2R09 253 bool "KFR2R09" 254 depends on CPU_SUBTYPE_SH7724 255 select GPIOLIB 256 select REGULATOR_FIXED_VOLTAGE if REGULATOR 257 help 258 "Kit For R2R for 2009" support. 259 260config SH_ECOVEC 261 bool "EcoVec" 262 depends on CPU_SUBTYPE_SH7724 263 select GPIOLIB 264 select SND_SOC_DA7210 if SND_SIMPLE_CARD 265 select REGULATOR_FIXED_VOLTAGE if REGULATOR 266 help 267 Renesas "R0P7724LC0011/21RL (EcoVec)" support. 268 269config SH_SH7763RDP 270 bool "SH7763RDP" 271 depends on CPU_SUBTYPE_SH7763 272 help 273 Select SH7763RDP if configuring for a Renesas SH7763 274 evaluation board. 275 276config SH_ESPT 277 bool "ESPT" 278 depends on CPU_SUBTYPE_SH7763 279 help 280 Select ESPT if configuring for a Renesas SH7763 281 with gigabit ether evaluation board. 282 283config SH_EDOSK7705 284 bool "EDOSK7705" 285 depends on CPU_SUBTYPE_SH7705 286 287config SH_EDOSK7760 288 bool "EDOSK7760" 289 depends on CPU_SUBTYPE_SH7760 290 help 291 Select if configuring for a Renesas EDOSK7760 292 evaluation board. 293 294config SH_SH4202_MICRODEV 295 bool "SH4-202 MicroDev" 296 depends on CPU_SUBTYPE_SH4_202 297 help 298 Select SH4-202 MicroDev if configuring for a SuperH MicroDev board 299 with an SH4-202 CPU. 300 301config SH_LANDISK 302 bool "LANDISK" 303 depends on CPU_SUBTYPE_SH7751R 304 select SYS_SUPPORTS_PCI 305 help 306 I-O DATA DEVICE, INC. "LANDISK Series" support. 307 308config SH_TITAN 309 bool "TITAN" 310 depends on CPU_SUBTYPE_SH7751R 311 select CPU_HAS_IPR_IRQ 312 select SYS_SUPPORTS_PCI 313 help 314 Select Titan if you are configuring for a Nimble Microsystems 315 NetEngine NP51R. 316 317config SH_SHMIN 318 bool "SHMIN" 319 depends on CPU_SUBTYPE_SH7706 320 select CPU_HAS_IPR_IRQ 321 help 322 Select SHMIN if configuring for the SHMIN board. 323 324config SH_LBOX_RE2 325 bool "L-BOX RE2" 326 depends on CPU_SUBTYPE_SH7751R 327 select SYS_SUPPORTS_PCI 328 help 329 Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. 330 331config SH_X3PROTO 332 bool "SH-X3 Prototype board" 333 depends on CPU_SUBTYPE_SHX3 334 select NO_IOPORT_MAP if !PCI 335 select IRQ_DOMAIN 336 337config SH_MAGIC_PANEL_R2 338 bool "Magic Panel R2" 339 depends on CPU_SUBTYPE_SH7720 340 select GPIOLIB 341 select REGULATOR_FIXED_VOLTAGE if REGULATOR 342 help 343 Select Magic Panel R2 if configuring for Magic Panel R2. 344 345config SH_CAYMAN 346 bool "Hitachi Cayman" 347 depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 348 select SYS_SUPPORTS_PCI 349 select ARCH_MIGHT_HAVE_PC_SERIO 350 351config SH_POLARIS 352 bool "SMSC Polaris" 353 select CPU_HAS_IPR_IRQ 354 select REGULATOR_FIXED_VOLTAGE if REGULATOR 355 depends on CPU_SUBTYPE_SH7709 356 help 357 Select if configuring for an SMSC Polaris development board 358 359config SH_SH2007 360 bool "SH-2007 board" 361 select NO_IOPORT_MAP 362 select REGULATOR_FIXED_VOLTAGE if REGULATOR 363 depends on CPU_SUBTYPE_SH7780 364 help 365 SH-2007 is a single-board computer based around SH7780 chip 366 intended for embedded applications. 367 It has an Ethernet interface (SMC9118), direct connected 368 Compact Flash socket, two serial ports and PC-104 bus. 369 More information at <http://sh2000.sh-linux.org>. 370 371config SH_APSH4A3A 372 bool "AP-SH4A-3A" 373 select SH_ALPHA_BOARD 374 select REGULATOR_FIXED_VOLTAGE if REGULATOR 375 depends on CPU_SUBTYPE_SH7785 376 help 377 Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. 378 379config SH_APSH4AD0A 380 bool "AP-SH4AD-0A" 381 select SH_ALPHA_BOARD 382 select SYS_SUPPORTS_PCI 383 select REGULATOR_FIXED_VOLTAGE if REGULATOR 384 depends on CPU_SUBTYPE_SH7786 385 help 386 Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. 387 388source "arch/sh/boards/mach-r2d/Kconfig" 389source "arch/sh/boards/mach-highlander/Kconfig" 390source "arch/sh/boards/mach-sdk7780/Kconfig" 391source "arch/sh/boards/mach-migor/Kconfig" 392source "arch/sh/boards/mach-rsk/Kconfig" 393 394if SH_MAGIC_PANEL_R2 395 396menu "Magic Panel R2 options" 397 398config SH_MAGIC_PANEL_R2_VERSION 399 int "Magic Panel R2 Version" 400 default "3" 401 help 402 Set the version of the Magic Panel R2 403 404endmenu 405 406endif 407 408endmenu 409