xref: /linux/arch/powerpc/sysdev/fsl_pci.h (revision e58e871becec2d3b04ed91c0c16fe8deac9c9dfa)
1 /*
2  * MPC85xx/86xx PCI Express structure define
3  *
4  * Copyright 2007,2011 Freescale Semiconductor, Inc
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  *
11  */
12 
13 #ifdef __KERNEL__
14 #ifndef __POWERPC_FSL_PCI_H
15 #define __POWERPC_FSL_PCI_H
16 
17 struct platform_device;
18 
19 
20 /* FSL PCI controller BRR1 register */
21 #define PCI_FSL_BRR1      0xbf8
22 #define PCI_FSL_BRR1_VER 0xffff
23 
24 #define PCIE_LTSSM	0x0404		/* PCIE Link Training and Status */
25 #define PCIE_LTSSM_L0	0x16		/* L0 state */
26 #define PCIE_IP_REV_2_2		0x02080202 /* PCIE IP block version Rev2.2 */
27 #define PCIE_IP_REV_3_0		0x02080300 /* PCIE IP block version Rev3.0 */
28 #define PIWAR_EN		0x80000000	/* Enable */
29 #define PIWAR_PF		0x20000000	/* prefetch */
30 #define PIWAR_TGI_LOCAL		0x00f00000	/* target - local memory */
31 #define PIWAR_READ_SNOOP	0x00050000
32 #define PIWAR_WRITE_SNOOP	0x00005000
33 #define PIWAR_SZ_MASK          0x0000003f
34 
35 #define PEX_PMCR_PTOMR		0x1
36 #define PEX_PMCR_EXL2S		0x2
37 
38 #define PME_DISR_EN_PTOD	0x00008000
39 #define PME_DISR_EN_ENL23D	0x00002000
40 #define PME_DISR_EN_EXL23D	0x00001000
41 
42 /* PCI/PCI Express outbound window reg */
43 struct pci_outbound_window_regs {
44 	__be32	potar;	/* 0x.0 - Outbound translation address register */
45 	__be32	potear;	/* 0x.4 - Outbound translation extended address register */
46 	__be32	powbar;	/* 0x.8 - Outbound window base address register */
47 	u8	res1[4];
48 	__be32	powar;	/* 0x.10 - Outbound window attributes register */
49 	u8	res2[12];
50 };
51 
52 /* PCI/PCI Express inbound window reg */
53 struct pci_inbound_window_regs {
54 	__be32	pitar;	/* 0x.0 - Inbound translation address register */
55 	u8	res1[4];
56 	__be32	piwbar;	/* 0x.8 - Inbound window base address register */
57 	__be32	piwbear;	/* 0x.c - Inbound window base extended address register */
58 	__be32	piwar;	/* 0x.10 - Inbound window attributes register */
59 	u8	res2[12];
60 };
61 
62 /* PCI/PCI Express IO block registers for 85xx/86xx */
63 struct ccsr_pci {
64 	__be32	config_addr;		/* 0x.000 - PCI/PCIE Configuration Address Register */
65 	__be32	config_data;		/* 0x.004 - PCI/PCIE Configuration Data Register */
66 	__be32	int_ack;		/* 0x.008 - PCI Interrupt Acknowledge Register */
67 	__be32	pex_otb_cpl_tor;	/* 0x.00c - PCIE Outbound completion timeout register */
68 	__be32	pex_conf_tor;		/* 0x.010 - PCIE configuration timeout register */
69 	__be32	pex_config;		/* 0x.014 - PCIE CONFIG Register */
70 	__be32	pex_int_status;		/* 0x.018 - PCIE interrupt status */
71 	u8	res2[4];
72 	__be32	pex_pme_mes_dr;		/* 0x.020 - PCIE PME and message detect register */
73 	__be32	pex_pme_mes_disr;	/* 0x.024 - PCIE PME and message disable register */
74 	__be32	pex_pme_mes_ier;	/* 0x.028 - PCIE PME and message interrupt enable register */
75 	__be32	pex_pmcr;		/* 0x.02c - PCIE power management command register */
76 	u8	res3[3016];
77 	__be32	block_rev1;	/* 0x.bf8 - PCIE Block Revision register 1 */
78 	__be32	block_rev2;	/* 0x.bfc - PCIE Block Revision register 2 */
79 
80 /* PCI/PCI Express outbound window 0-4
81  * Window 0 is the default window and is the only window enabled upon reset.
82  * The default outbound register set is used when a transaction misses
83  * in all of the other outbound windows.
84  */
85 	struct pci_outbound_window_regs pow[5];
86 	u8	res14[96];
87 	struct pci_inbound_window_regs	pmit;	/* 0xd00 - 0xd9c Inbound MSI */
88 	u8	res6[96];
89 /* PCI/PCI Express inbound window 3-0
90  * inbound window 1 supports only a 32-bit base address and does not
91  * define an inbound window base extended address register.
92  */
93 	struct pci_inbound_window_regs piw[4];
94 
95 	__be32	pex_err_dr;		/* 0x.e00 - PCI/PCIE error detect register */
96 	u8	res21[4];
97 	__be32	pex_err_en;		/* 0x.e08 - PCI/PCIE error interrupt enable register */
98 	u8	res22[4];
99 	__be32	pex_err_disr;		/* 0x.e10 - PCI/PCIE error disable register */
100 	u8	res23[12];
101 	__be32	pex_err_cap_stat;	/* 0x.e20 - PCI/PCIE error capture status register */
102 	u8	res24[4];
103 	__be32	pex_err_cap_r0;		/* 0x.e28 - PCIE error capture register 0 */
104 	__be32	pex_err_cap_r1;		/* 0x.e2c - PCIE error capture register 0 */
105 	__be32	pex_err_cap_r2;		/* 0x.e30 - PCIE error capture register 0 */
106 	__be32	pex_err_cap_r3;		/* 0x.e34 - PCIE error capture register 0 */
107 	u8	res_e38[200];
108 	__be32	pdb_stat;		/* 0x.f00 - PCIE Debug Status */
109 	u8	res_f04[16];
110 	__be32	pex_csr0;		/* 0x.f14 - PEX Control/Status register 0*/
111 #define PEX_CSR0_LTSSM_MASK	0xFC
112 #define PEX_CSR0_LTSSM_SHIFT	2
113 #define PEX_CSR0_LTSSM_L0	0x11
114 	__be32	pex_csr1;		/* 0x.f18 - PEX Control/Status register 1*/
115 	u8	res_f1c[228];
116 
117 };
118 
119 extern int fsl_add_bridge(struct platform_device *pdev, int is_primary);
120 extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
121 extern void fsl_pcibios_fixup_phb(struct pci_controller *phb);
122 extern int mpc83xx_add_bridge(struct device_node *dev);
123 u64 fsl_pci_immrbar_base(struct pci_controller *hose);
124 
125 extern struct device_node *fsl_pci_primary;
126 
127 #ifdef CONFIG_PCI
128 void fsl_pci_assign_primary(void);
129 #else
130 static inline void fsl_pci_assign_primary(void) {}
131 #endif
132 
133 #ifdef CONFIG_FSL_PCI
134 extern int fsl_pci_mcheck_exception(struct pt_regs *);
135 #else
136 static inline int fsl_pci_mcheck_exception(struct pt_regs *regs) {return 0; }
137 #endif
138 
139 #endif /* __POWERPC_FSL_PCI_H */
140 #endif /* __KERNEL__ */
141