1 /* 2 * MPC83xx/85xx/86xx PCI/PCIE support routing. 3 * 4 * Copyright 2007-2012 Freescale Semiconductor, Inc. 5 * Copyright 2008-2009 MontaVista Software, Inc. 6 * 7 * Initial author: Xianghua Xiao <x.xiao@freescale.com> 8 * Recode: ZHANG WEI <wei.zhang@freescale.com> 9 * Rewrite the routing for Frescale PCI and PCI Express 10 * Roy Zang <tie-fei.zang@freescale.com> 11 * MPC83xx PCI-Express support: 12 * Tony Li <tony.li@freescale.com> 13 * Anton Vorontsov <avorontsov@ru.mvista.com> 14 * 15 * This program is free software; you can redistribute it and/or modify it 16 * under the terms of the GNU General Public License as published by the 17 * Free Software Foundation; either version 2 of the License, or (at your 18 * option) any later version. 19 */ 20 #include <linux/kernel.h> 21 #include <linux/pci.h> 22 #include <linux/delay.h> 23 #include <linux/string.h> 24 #include <linux/init.h> 25 #include <linux/bootmem.h> 26 #include <linux/memblock.h> 27 #include <linux/log2.h> 28 #include <linux/slab.h> 29 #include <linux/uaccess.h> 30 31 #include <asm/io.h> 32 #include <asm/prom.h> 33 #include <asm/pci-bridge.h> 34 #include <asm/ppc-pci.h> 35 #include <asm/machdep.h> 36 #include <asm/disassemble.h> 37 #include <asm/ppc-opcode.h> 38 #include <sysdev/fsl_soc.h> 39 #include <sysdev/fsl_pci.h> 40 41 static int fsl_pcie_bus_fixup, is_mpc83xx_pci; 42 43 static void quirk_fsl_pcie_early(struct pci_dev *dev) 44 { 45 u8 hdr_type; 46 47 /* if we aren't a PCIe don't bother */ 48 if (!pci_is_pcie(dev)) 49 return; 50 51 /* if we aren't in host mode don't bother */ 52 pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type); 53 if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) 54 return; 55 56 dev->class = PCI_CLASS_BRIDGE_PCI << 8; 57 fsl_pcie_bus_fixup = 1; 58 return; 59 } 60 61 static int fsl_indirect_read_config(struct pci_bus *, unsigned int, 62 int, int, u32 *); 63 64 static int fsl_pcie_check_link(struct pci_controller *hose) 65 { 66 u32 val = 0; 67 68 if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) { 69 if (hose->ops->read == fsl_indirect_read_config) { 70 struct pci_bus bus; 71 bus.number = hose->first_busno; 72 bus.sysdata = hose; 73 bus.ops = hose->ops; 74 indirect_read_config(&bus, 0, PCIE_LTSSM, 4, &val); 75 } else 76 early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); 77 if (val < PCIE_LTSSM_L0) 78 return 1; 79 } else { 80 struct ccsr_pci __iomem *pci = hose->private_data; 81 /* for PCIe IP rev 3.0 or greater use CSR0 for link state */ 82 val = (in_be32(&pci->pex_csr0) & PEX_CSR0_LTSSM_MASK) 83 >> PEX_CSR0_LTSSM_SHIFT; 84 if (val != PEX_CSR0_LTSSM_L0) 85 return 1; 86 } 87 88 return 0; 89 } 90 91 static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn, 92 int offset, int len, u32 *val) 93 { 94 struct pci_controller *hose = pci_bus_to_host(bus); 95 96 if (fsl_pcie_check_link(hose)) 97 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; 98 else 99 hose->indirect_type &= ~PPC_INDIRECT_TYPE_NO_PCIE_LINK; 100 101 return indirect_read_config(bus, devfn, offset, len, val); 102 } 103 104 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) 105 106 static struct pci_ops fsl_indirect_pcie_ops = 107 { 108 .read = fsl_indirect_read_config, 109 .write = indirect_write_config, 110 }; 111 112 #define MAX_PHYS_ADDR_BITS 40 113 static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS; 114 115 static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) 116 { 117 if (!dev->dma_mask || !dma_supported(dev, dma_mask)) 118 return -EIO; 119 120 /* 121 * Fixup PCI devices that are able to DMA to above the physical 122 * address width of the SoC such that we can address any internal 123 * SoC address from across PCI if needed 124 */ 125 if ((dev->bus == &pci_bus_type) && 126 dma_mask >= DMA_BIT_MASK(MAX_PHYS_ADDR_BITS)) { 127 set_dma_ops(dev, &dma_direct_ops); 128 set_dma_offset(dev, pci64_dma_offset); 129 } 130 131 *dev->dma_mask = dma_mask; 132 return 0; 133 } 134 135 static int setup_one_atmu(struct ccsr_pci __iomem *pci, 136 unsigned int index, const struct resource *res, 137 resource_size_t offset) 138 { 139 resource_size_t pci_addr = res->start - offset; 140 resource_size_t phys_addr = res->start; 141 resource_size_t size = resource_size(res); 142 u32 flags = 0x80044000; /* enable & mem R/W */ 143 unsigned int i; 144 145 pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n", 146 (u64)res->start, (u64)size); 147 148 if (res->flags & IORESOURCE_PREFETCH) 149 flags |= 0x10000000; /* enable relaxed ordering */ 150 151 for (i = 0; size > 0; i++) { 152 unsigned int bits = min(ilog2(size), 153 __ffs(pci_addr | phys_addr)); 154 155 if (index + i >= 5) 156 return -1; 157 158 out_be32(&pci->pow[index + i].potar, pci_addr >> 12); 159 out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44); 160 out_be32(&pci->pow[index + i].powbar, phys_addr >> 12); 161 out_be32(&pci->pow[index + i].powar, flags | (bits - 1)); 162 163 pci_addr += (resource_size_t)1U << bits; 164 phys_addr += (resource_size_t)1U << bits; 165 size -= (resource_size_t)1U << bits; 166 } 167 168 return i; 169 } 170 171 /* atmu setup for fsl pci/pcie controller */ 172 static void setup_pci_atmu(struct pci_controller *hose) 173 { 174 struct ccsr_pci __iomem *pci = hose->private_data; 175 int i, j, n, mem_log, win_idx = 3, start_idx = 1, end_idx = 4; 176 u64 mem, sz, paddr_hi = 0; 177 u64 offset = 0, paddr_lo = ULLONG_MAX; 178 u32 pcicsrbar = 0, pcicsrbar_sz; 179 u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL | 180 PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; 181 const char *name = hose->dn->full_name; 182 const u64 *reg; 183 int len; 184 185 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { 186 if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) { 187 win_idx = 2; 188 start_idx = 0; 189 end_idx = 3; 190 } 191 } 192 193 /* Disable all windows (except powar0 since it's ignored) */ 194 for(i = 1; i < 5; i++) 195 out_be32(&pci->pow[i].powar, 0); 196 for (i = start_idx; i < end_idx; i++) 197 out_be32(&pci->piw[i].piwar, 0); 198 199 /* Setup outbound MEM window */ 200 for(i = 0, j = 1; i < 3; i++) { 201 if (!(hose->mem_resources[i].flags & IORESOURCE_MEM)) 202 continue; 203 204 paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start); 205 paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end); 206 207 /* We assume all memory resources have the same offset */ 208 offset = hose->mem_offset[i]; 209 n = setup_one_atmu(pci, j, &hose->mem_resources[i], offset); 210 211 if (n < 0 || j >= 5) { 212 pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i); 213 hose->mem_resources[i].flags |= IORESOURCE_DISABLED; 214 } else 215 j += n; 216 } 217 218 /* Setup outbound IO window */ 219 if (hose->io_resource.flags & IORESOURCE_IO) { 220 if (j >= 5) { 221 pr_err("Ran out of outbound PCI ATMUs for IO resource\n"); 222 } else { 223 pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, " 224 "phy base 0x%016llx.\n", 225 (u64)hose->io_resource.start, 226 (u64)resource_size(&hose->io_resource), 227 (u64)hose->io_base_phys); 228 out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12)); 229 out_be32(&pci->pow[j].potear, 0); 230 out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12)); 231 /* Enable, IO R/W */ 232 out_be32(&pci->pow[j].powar, 0x80088000 233 | (ilog2(hose->io_resource.end 234 - hose->io_resource.start + 1) - 1)); 235 } 236 } 237 238 /* convert to pci address space */ 239 paddr_hi -= offset; 240 paddr_lo -= offset; 241 242 if (paddr_hi == paddr_lo) { 243 pr_err("%s: No outbound window space\n", name); 244 return; 245 } 246 247 if (paddr_lo == 0) { 248 pr_err("%s: No space for inbound window\n", name); 249 return; 250 } 251 252 /* setup PCSRBAR/PEXCSRBAR */ 253 early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff); 254 early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz); 255 pcicsrbar_sz = ~pcicsrbar_sz + 1; 256 257 if (paddr_hi < (0x100000000ull - pcicsrbar_sz) || 258 (paddr_lo > 0x100000000ull)) 259 pcicsrbar = 0x100000000ull - pcicsrbar_sz; 260 else 261 pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz; 262 early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar); 263 264 paddr_lo = min(paddr_lo, (u64)pcicsrbar); 265 266 pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar); 267 268 /* Setup inbound mem window */ 269 mem = memblock_end_of_DRAM(); 270 271 /* 272 * The msi-address-64 property, if it exists, indicates the physical 273 * address of the MSIIR register. Normally, this register is located 274 * inside CCSR, so the ATMU that covers all of CCSR is used. But if 275 * this property exists, then we normally need to create a new ATMU 276 * for it. For now, however, we cheat. The only entity that creates 277 * this property is the Freescale hypervisor, and the address is 278 * specified in the partition configuration. Typically, the address 279 * is located in the page immediately after the end of DDR. If so, we 280 * can avoid allocating a new ATMU by extending the DDR ATMU by one 281 * page. 282 */ 283 reg = of_get_property(hose->dn, "msi-address-64", &len); 284 if (reg && (len == sizeof(u64))) { 285 u64 address = be64_to_cpup(reg); 286 287 if ((address >= mem) && (address < (mem + PAGE_SIZE))) { 288 pr_info("%s: extending DDR ATMU to cover MSIIR", name); 289 mem += PAGE_SIZE; 290 } else { 291 /* TODO: Create a new ATMU for MSIIR */ 292 pr_warn("%s: msi-address-64 address of %llx is " 293 "unsupported\n", name, address); 294 } 295 } 296 297 sz = min(mem, paddr_lo); 298 mem_log = ilog2(sz); 299 300 /* PCIe can overmap inbound & outbound since RX & TX are separated */ 301 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { 302 /* Size window to exact size if power-of-two or one size up */ 303 if ((1ull << mem_log) != mem) { 304 mem_log++; 305 if ((1ull << mem_log) > mem) 306 pr_info("%s: Setting PCI inbound window " 307 "greater than memory size\n", name); 308 } 309 310 piwar |= ((mem_log - 1) & PIWAR_SZ_MASK); 311 312 /* Setup inbound memory window */ 313 out_be32(&pci->piw[win_idx].pitar, 0x00000000); 314 out_be32(&pci->piw[win_idx].piwbar, 0x00000000); 315 out_be32(&pci->piw[win_idx].piwar, piwar); 316 win_idx--; 317 318 hose->dma_window_base_cur = 0x00000000; 319 hose->dma_window_size = (resource_size_t)sz; 320 321 /* 322 * if we have >4G of memory setup second PCI inbound window to 323 * let devices that are 64-bit address capable to work w/o 324 * SWIOTLB and access the full range of memory 325 */ 326 if (sz != mem) { 327 mem_log = ilog2(mem); 328 329 /* Size window up if we dont fit in exact power-of-2 */ 330 if ((1ull << mem_log) != mem) 331 mem_log++; 332 333 piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1); 334 335 /* Setup inbound memory window */ 336 out_be32(&pci->piw[win_idx].pitar, 0x00000000); 337 out_be32(&pci->piw[win_idx].piwbear, 338 pci64_dma_offset >> 44); 339 out_be32(&pci->piw[win_idx].piwbar, 340 pci64_dma_offset >> 12); 341 out_be32(&pci->piw[win_idx].piwar, piwar); 342 343 /* 344 * install our own dma_set_mask handler to fixup dma_ops 345 * and dma_offset 346 */ 347 ppc_md.dma_set_mask = fsl_pci_dma_set_mask; 348 349 pr_info("%s: Setup 64-bit PCI DMA window\n", name); 350 } 351 } else { 352 u64 paddr = 0; 353 354 /* Setup inbound memory window */ 355 out_be32(&pci->piw[win_idx].pitar, paddr >> 12); 356 out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); 357 out_be32(&pci->piw[win_idx].piwar, (piwar | (mem_log - 1))); 358 win_idx--; 359 360 paddr += 1ull << mem_log; 361 sz -= 1ull << mem_log; 362 363 if (sz) { 364 mem_log = ilog2(sz); 365 piwar |= (mem_log - 1); 366 367 out_be32(&pci->piw[win_idx].pitar, paddr >> 12); 368 out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); 369 out_be32(&pci->piw[win_idx].piwar, piwar); 370 win_idx--; 371 372 paddr += 1ull << mem_log; 373 } 374 375 hose->dma_window_base_cur = 0x00000000; 376 hose->dma_window_size = (resource_size_t)paddr; 377 } 378 379 if (hose->dma_window_size < mem) { 380 #ifdef CONFIG_SWIOTLB 381 ppc_swiotlb_enable = 1; 382 #else 383 pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to " 384 "map - enable CONFIG_SWIOTLB to avoid dma errors.\n", 385 name); 386 #endif 387 /* adjusting outbound windows could reclaim space in mem map */ 388 if (paddr_hi < 0xffffffffull) 389 pr_warning("%s: WARNING: Outbound window cfg leaves " 390 "gaps in memory map. Adjusting the memory map " 391 "could reduce unnecessary bounce buffering.\n", 392 name); 393 394 pr_info("%s: DMA window size is 0x%llx\n", name, 395 (u64)hose->dma_window_size); 396 } 397 } 398 399 static void __init setup_pci_cmd(struct pci_controller *hose) 400 { 401 u16 cmd; 402 int cap_x; 403 404 early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); 405 cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY 406 | PCI_COMMAND_IO; 407 early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); 408 409 cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX); 410 if (cap_x) { 411 int pci_x_cmd = cap_x + PCI_X_CMD; 412 cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ 413 | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; 414 early_write_config_word(hose, 0, 0, pci_x_cmd, cmd); 415 } else { 416 early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); 417 } 418 } 419 420 void fsl_pcibios_fixup_bus(struct pci_bus *bus) 421 { 422 struct pci_controller *hose = pci_bus_to_host(bus); 423 int i, is_pcie = 0, no_link; 424 425 /* The root complex bridge comes up with bogus resources, 426 * we copy the PHB ones in. 427 * 428 * With the current generic PCI code, the PHB bus no longer 429 * has bus->resource[0..4] set, so things are a bit more 430 * tricky. 431 */ 432 433 if (fsl_pcie_bus_fixup) 434 is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP); 435 no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK); 436 437 if (bus->parent == hose->bus && (is_pcie || no_link)) { 438 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) { 439 struct resource *res = bus->resource[i]; 440 struct resource *par; 441 442 if (!res) 443 continue; 444 if (i == 0) 445 par = &hose->io_resource; 446 else if (i < 4) 447 par = &hose->mem_resources[i-1]; 448 else par = NULL; 449 450 res->start = par ? par->start : 0; 451 res->end = par ? par->end : 0; 452 res->flags = par ? par->flags : 0; 453 } 454 } 455 } 456 457 int __init fsl_add_bridge(struct platform_device *pdev, int is_primary) 458 { 459 int len; 460 struct pci_controller *hose; 461 struct resource rsrc; 462 const int *bus_range; 463 u8 hdr_type, progif; 464 struct device_node *dev; 465 struct ccsr_pci __iomem *pci; 466 467 dev = pdev->dev.of_node; 468 469 if (!of_device_is_available(dev)) { 470 pr_warning("%s: disabled\n", dev->full_name); 471 return -ENODEV; 472 } 473 474 pr_debug("Adding PCI host bridge %s\n", dev->full_name); 475 476 /* Fetch host bridge registers address */ 477 if (of_address_to_resource(dev, 0, &rsrc)) { 478 printk(KERN_WARNING "Can't get pci register base!"); 479 return -ENOMEM; 480 } 481 482 /* Get bus range if any */ 483 bus_range = of_get_property(dev, "bus-range", &len); 484 if (bus_range == NULL || len < 2 * sizeof(int)) 485 printk(KERN_WARNING "Can't get bus-range for %s, assume" 486 " bus 0\n", dev->full_name); 487 488 pci_add_flags(PCI_REASSIGN_ALL_BUS); 489 hose = pcibios_alloc_controller(dev); 490 if (!hose) 491 return -ENOMEM; 492 493 /* set platform device as the parent */ 494 hose->parent = &pdev->dev; 495 hose->first_busno = bus_range ? bus_range[0] : 0x0; 496 hose->last_busno = bus_range ? bus_range[1] : 0xff; 497 498 pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", 499 (u64)rsrc.start, (u64)resource_size(&rsrc)); 500 501 pci = hose->private_data = ioremap(rsrc.start, resource_size(&rsrc)); 502 if (!hose->private_data) 503 goto no_bridge; 504 505 setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, 506 PPC_INDIRECT_TYPE_BIG_ENDIAN); 507 508 if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0) 509 hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK; 510 511 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { 512 /* use fsl_indirect_read_config for PCIe */ 513 hose->ops = &fsl_indirect_pcie_ops; 514 /* For PCIE read HEADER_TYPE to identify controler mode */ 515 early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type); 516 if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) 517 goto no_bridge; 518 519 } else { 520 /* For PCI read PROG to identify controller mode */ 521 early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif); 522 if ((progif & 1) == 1) 523 goto no_bridge; 524 } 525 526 setup_pci_cmd(hose); 527 528 /* check PCI express link status */ 529 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { 530 hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG | 531 PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; 532 if (fsl_pcie_check_link(hose)) 533 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; 534 } 535 536 printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " 537 "Firmware bus number: %d->%d\n", 538 (unsigned long long)rsrc.start, hose->first_busno, 539 hose->last_busno); 540 541 pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", 542 hose, hose->cfg_addr, hose->cfg_data); 543 544 /* Interpret the "ranges" property */ 545 /* This also maps the I/O region and sets isa_io/mem_base */ 546 pci_process_bridge_OF_ranges(hose, dev, is_primary); 547 548 /* Setup PEX window registers */ 549 setup_pci_atmu(hose); 550 551 return 0; 552 553 no_bridge: 554 iounmap(hose->private_data); 555 /* unmap cfg_data & cfg_addr separately if not on same page */ 556 if (((unsigned long)hose->cfg_data & PAGE_MASK) != 557 ((unsigned long)hose->cfg_addr & PAGE_MASK)) 558 iounmap(hose->cfg_data); 559 iounmap(hose->cfg_addr); 560 pcibios_free_controller(hose); 561 return -ENODEV; 562 } 563 #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ 564 565 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, 566 quirk_fsl_pcie_early); 567 568 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) 569 struct mpc83xx_pcie_priv { 570 void __iomem *cfg_type0; 571 void __iomem *cfg_type1; 572 u32 dev_base; 573 }; 574 575 struct pex_inbound_window { 576 u32 ar; 577 u32 tar; 578 u32 barl; 579 u32 barh; 580 }; 581 582 /* 583 * With the convention of u-boot, the PCIE outbound window 0 serves 584 * as configuration transactions outbound. 585 */ 586 #define PEX_OUTWIN0_BAR 0xCA4 587 #define PEX_OUTWIN0_TAL 0xCA8 588 #define PEX_OUTWIN0_TAH 0xCAC 589 #define PEX_RC_INWIN_BASE 0xE60 590 #define PEX_RCIWARn_EN 0x1 591 592 static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn) 593 { 594 struct pci_controller *hose = pci_bus_to_host(bus); 595 596 if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) 597 return PCIBIOS_DEVICE_NOT_FOUND; 598 /* 599 * Workaround for the HW bug: for Type 0 configure transactions the 600 * PCI-E controller does not check the device number bits and just 601 * assumes that the device number bits are 0. 602 */ 603 if (bus->number == hose->first_busno || 604 bus->primary == hose->first_busno) { 605 if (devfn & 0xf8) 606 return PCIBIOS_DEVICE_NOT_FOUND; 607 } 608 609 if (ppc_md.pci_exclude_device) { 610 if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) 611 return PCIBIOS_DEVICE_NOT_FOUND; 612 } 613 614 return PCIBIOS_SUCCESSFUL; 615 } 616 617 static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus, 618 unsigned int devfn, int offset) 619 { 620 struct pci_controller *hose = pci_bus_to_host(bus); 621 struct mpc83xx_pcie_priv *pcie = hose->dn->data; 622 u32 dev_base = bus->number << 24 | devfn << 16; 623 int ret; 624 625 ret = mpc83xx_pcie_exclude_device(bus, devfn); 626 if (ret) 627 return NULL; 628 629 offset &= 0xfff; 630 631 /* Type 0 */ 632 if (bus->number == hose->first_busno) 633 return pcie->cfg_type0 + offset; 634 635 if (pcie->dev_base == dev_base) 636 goto mapped; 637 638 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base); 639 640 pcie->dev_base = dev_base; 641 mapped: 642 return pcie->cfg_type1 + offset; 643 } 644 645 static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, 646 int offset, int len, u32 *val) 647 { 648 void __iomem *cfg_addr; 649 650 cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); 651 if (!cfg_addr) 652 return PCIBIOS_DEVICE_NOT_FOUND; 653 654 switch (len) { 655 case 1: 656 *val = in_8(cfg_addr); 657 break; 658 case 2: 659 *val = in_le16(cfg_addr); 660 break; 661 default: 662 *val = in_le32(cfg_addr); 663 break; 664 } 665 666 return PCIBIOS_SUCCESSFUL; 667 } 668 669 static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, 670 int offset, int len, u32 val) 671 { 672 struct pci_controller *hose = pci_bus_to_host(bus); 673 void __iomem *cfg_addr; 674 675 cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); 676 if (!cfg_addr) 677 return PCIBIOS_DEVICE_NOT_FOUND; 678 679 /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */ 680 if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno) 681 val &= 0xffffff00; 682 683 switch (len) { 684 case 1: 685 out_8(cfg_addr, val); 686 break; 687 case 2: 688 out_le16(cfg_addr, val); 689 break; 690 default: 691 out_le32(cfg_addr, val); 692 break; 693 } 694 695 return PCIBIOS_SUCCESSFUL; 696 } 697 698 static struct pci_ops mpc83xx_pcie_ops = { 699 .read = mpc83xx_pcie_read_config, 700 .write = mpc83xx_pcie_write_config, 701 }; 702 703 static int __init mpc83xx_pcie_setup(struct pci_controller *hose, 704 struct resource *reg) 705 { 706 struct mpc83xx_pcie_priv *pcie; 707 u32 cfg_bar; 708 int ret = -ENOMEM; 709 710 pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL); 711 if (!pcie) 712 return ret; 713 714 pcie->cfg_type0 = ioremap(reg->start, resource_size(reg)); 715 if (!pcie->cfg_type0) 716 goto err0; 717 718 cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR); 719 if (!cfg_bar) { 720 /* PCI-E isn't configured. */ 721 ret = -ENODEV; 722 goto err1; 723 } 724 725 pcie->cfg_type1 = ioremap(cfg_bar, 0x1000); 726 if (!pcie->cfg_type1) 727 goto err1; 728 729 WARN_ON(hose->dn->data); 730 hose->dn->data = pcie; 731 hose->ops = &mpc83xx_pcie_ops; 732 hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK; 733 734 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0); 735 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0); 736 737 if (fsl_pcie_check_link(hose)) 738 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; 739 740 return 0; 741 err1: 742 iounmap(pcie->cfg_type0); 743 err0: 744 kfree(pcie); 745 return ret; 746 747 } 748 749 int __init mpc83xx_add_bridge(struct device_node *dev) 750 { 751 int ret; 752 int len; 753 struct pci_controller *hose; 754 struct resource rsrc_reg; 755 struct resource rsrc_cfg; 756 const int *bus_range; 757 int primary; 758 759 is_mpc83xx_pci = 1; 760 761 if (!of_device_is_available(dev)) { 762 pr_warning("%s: disabled by the firmware.\n", 763 dev->full_name); 764 return -ENODEV; 765 } 766 pr_debug("Adding PCI host bridge %s\n", dev->full_name); 767 768 /* Fetch host bridge registers address */ 769 if (of_address_to_resource(dev, 0, &rsrc_reg)) { 770 printk(KERN_WARNING "Can't get pci register base!\n"); 771 return -ENOMEM; 772 } 773 774 memset(&rsrc_cfg, 0, sizeof(rsrc_cfg)); 775 776 if (of_address_to_resource(dev, 1, &rsrc_cfg)) { 777 printk(KERN_WARNING 778 "No pci config register base in dev tree, " 779 "using default\n"); 780 /* 781 * MPC83xx supports up to two host controllers 782 * one at 0x8500 has config space registers at 0x8300 783 * one at 0x8600 has config space registers at 0x8380 784 */ 785 if ((rsrc_reg.start & 0xfffff) == 0x8500) 786 rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300; 787 else if ((rsrc_reg.start & 0xfffff) == 0x8600) 788 rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380; 789 } 790 /* 791 * Controller at offset 0x8500 is primary 792 */ 793 if ((rsrc_reg.start & 0xfffff) == 0x8500) 794 primary = 1; 795 else 796 primary = 0; 797 798 /* Get bus range if any */ 799 bus_range = of_get_property(dev, "bus-range", &len); 800 if (bus_range == NULL || len < 2 * sizeof(int)) { 801 printk(KERN_WARNING "Can't get bus-range for %s, assume" 802 " bus 0\n", dev->full_name); 803 } 804 805 pci_add_flags(PCI_REASSIGN_ALL_BUS); 806 hose = pcibios_alloc_controller(dev); 807 if (!hose) 808 return -ENOMEM; 809 810 hose->first_busno = bus_range ? bus_range[0] : 0; 811 hose->last_busno = bus_range ? bus_range[1] : 0xff; 812 813 if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) { 814 ret = mpc83xx_pcie_setup(hose, &rsrc_reg); 815 if (ret) 816 goto err0; 817 } else { 818 setup_indirect_pci(hose, rsrc_cfg.start, 819 rsrc_cfg.start + 4, 0); 820 } 821 822 printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " 823 "Firmware bus number: %d->%d\n", 824 (unsigned long long)rsrc_reg.start, hose->first_busno, 825 hose->last_busno); 826 827 pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", 828 hose, hose->cfg_addr, hose->cfg_data); 829 830 /* Interpret the "ranges" property */ 831 /* This also maps the I/O region and sets isa_io/mem_base */ 832 pci_process_bridge_OF_ranges(hose, dev, primary); 833 834 return 0; 835 err0: 836 pcibios_free_controller(hose); 837 return ret; 838 } 839 #endif /* CONFIG_PPC_83xx */ 840 841 u64 fsl_pci_immrbar_base(struct pci_controller *hose) 842 { 843 #ifdef CONFIG_PPC_83xx 844 if (is_mpc83xx_pci) { 845 struct mpc83xx_pcie_priv *pcie = hose->dn->data; 846 struct pex_inbound_window *in; 847 int i; 848 849 /* Walk the Root Complex Inbound windows to match IMMR base */ 850 in = pcie->cfg_type0 + PEX_RC_INWIN_BASE; 851 for (i = 0; i < 4; i++) { 852 /* not enabled, skip */ 853 if (!in_le32(&in[i].ar) & PEX_RCIWARn_EN) 854 continue; 855 856 if (get_immrbase() == in_le32(&in[i].tar)) 857 return (u64)in_le32(&in[i].barh) << 32 | 858 in_le32(&in[i].barl); 859 } 860 861 printk(KERN_WARNING "could not find PCI BAR matching IMMR\n"); 862 } 863 #endif 864 865 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) 866 if (!is_mpc83xx_pci) { 867 u32 base; 868 869 pci_bus_read_config_dword(hose->bus, 870 PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base); 871 return base; 872 } 873 #endif 874 875 return 0; 876 } 877 878 #ifdef CONFIG_E500 879 static int mcheck_handle_load(struct pt_regs *regs, u32 inst) 880 { 881 unsigned int rd, ra, rb, d; 882 883 rd = get_rt(inst); 884 ra = get_ra(inst); 885 rb = get_rb(inst); 886 d = get_d(inst); 887 888 switch (get_op(inst)) { 889 case 31: 890 switch (get_xop(inst)) { 891 case OP_31_XOP_LWZX: 892 case OP_31_XOP_LWBRX: 893 regs->gpr[rd] = 0xffffffff; 894 break; 895 896 case OP_31_XOP_LWZUX: 897 regs->gpr[rd] = 0xffffffff; 898 regs->gpr[ra] += regs->gpr[rb]; 899 break; 900 901 case OP_31_XOP_LBZX: 902 regs->gpr[rd] = 0xff; 903 break; 904 905 case OP_31_XOP_LBZUX: 906 regs->gpr[rd] = 0xff; 907 regs->gpr[ra] += regs->gpr[rb]; 908 break; 909 910 case OP_31_XOP_LHZX: 911 case OP_31_XOP_LHBRX: 912 regs->gpr[rd] = 0xffff; 913 break; 914 915 case OP_31_XOP_LHZUX: 916 regs->gpr[rd] = 0xffff; 917 regs->gpr[ra] += regs->gpr[rb]; 918 break; 919 920 case OP_31_XOP_LHAX: 921 regs->gpr[rd] = ~0UL; 922 break; 923 924 case OP_31_XOP_LHAUX: 925 regs->gpr[rd] = ~0UL; 926 regs->gpr[ra] += regs->gpr[rb]; 927 break; 928 929 default: 930 return 0; 931 } 932 break; 933 934 case OP_LWZ: 935 regs->gpr[rd] = 0xffffffff; 936 break; 937 938 case OP_LWZU: 939 regs->gpr[rd] = 0xffffffff; 940 regs->gpr[ra] += (s16)d; 941 break; 942 943 case OP_LBZ: 944 regs->gpr[rd] = 0xff; 945 break; 946 947 case OP_LBZU: 948 regs->gpr[rd] = 0xff; 949 regs->gpr[ra] += (s16)d; 950 break; 951 952 case OP_LHZ: 953 regs->gpr[rd] = 0xffff; 954 break; 955 956 case OP_LHZU: 957 regs->gpr[rd] = 0xffff; 958 regs->gpr[ra] += (s16)d; 959 break; 960 961 case OP_LHA: 962 regs->gpr[rd] = ~0UL; 963 break; 964 965 case OP_LHAU: 966 regs->gpr[rd] = ~0UL; 967 regs->gpr[ra] += (s16)d; 968 break; 969 970 default: 971 return 0; 972 } 973 974 return 1; 975 } 976 977 static int is_in_pci_mem_space(phys_addr_t addr) 978 { 979 struct pci_controller *hose; 980 struct resource *res; 981 int i; 982 983 list_for_each_entry(hose, &hose_list, list_node) { 984 if (!(hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)) 985 continue; 986 987 for (i = 0; i < 3; i++) { 988 res = &hose->mem_resources[i]; 989 if ((res->flags & IORESOURCE_MEM) && 990 addr >= res->start && addr <= res->end) 991 return 1; 992 } 993 } 994 return 0; 995 } 996 997 int fsl_pci_mcheck_exception(struct pt_regs *regs) 998 { 999 u32 inst; 1000 int ret; 1001 phys_addr_t addr = 0; 1002 1003 /* Let KVM/QEMU deal with the exception */ 1004 if (regs->msr & MSR_GS) 1005 return 0; 1006 1007 #ifdef CONFIG_PHYS_64BIT 1008 addr = mfspr(SPRN_MCARU); 1009 addr <<= 32; 1010 #endif 1011 addr += mfspr(SPRN_MCAR); 1012 1013 if (is_in_pci_mem_space(addr)) { 1014 if (user_mode(regs)) { 1015 pagefault_disable(); 1016 ret = get_user(regs->nip, &inst); 1017 pagefault_enable(); 1018 } else { 1019 ret = probe_kernel_address(regs->nip, inst); 1020 } 1021 1022 if (mcheck_handle_load(regs, inst)) { 1023 regs->nip += 4; 1024 return 1; 1025 } 1026 } 1027 1028 return 0; 1029 } 1030 #endif 1031 1032 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) 1033 static const struct of_device_id pci_ids[] = { 1034 { .compatible = "fsl,mpc8540-pci", }, 1035 { .compatible = "fsl,mpc8548-pcie", }, 1036 { .compatible = "fsl,mpc8610-pci", }, 1037 { .compatible = "fsl,mpc8641-pcie", }, 1038 { .compatible = "fsl,qoriq-pcie-v2.1", }, 1039 { .compatible = "fsl,qoriq-pcie-v2.2", }, 1040 { .compatible = "fsl,qoriq-pcie-v2.3", }, 1041 { .compatible = "fsl,qoriq-pcie-v2.4", }, 1042 { .compatible = "fsl,qoriq-pcie-v3.0", }, 1043 1044 /* 1045 * The following entries are for compatibility with older device 1046 * trees. 1047 */ 1048 { .compatible = "fsl,p1022-pcie", }, 1049 { .compatible = "fsl,p4080-pcie", }, 1050 1051 {}, 1052 }; 1053 1054 struct device_node *fsl_pci_primary; 1055 1056 void fsl_pci_assign_primary(void) 1057 { 1058 struct device_node *np; 1059 1060 /* Callers can specify the primary bus using other means. */ 1061 if (fsl_pci_primary) 1062 return; 1063 1064 /* If a PCI host bridge contains an ISA node, it's primary. */ 1065 np = of_find_node_by_type(NULL, "isa"); 1066 while ((fsl_pci_primary = of_get_parent(np))) { 1067 of_node_put(np); 1068 np = fsl_pci_primary; 1069 1070 if (of_match_node(pci_ids, np) && of_device_is_available(np)) 1071 return; 1072 } 1073 1074 /* 1075 * If there's no PCI host bridge with ISA, arbitrarily 1076 * designate one as primary. This can go away once 1077 * various bugs with primary-less systems are fixed. 1078 */ 1079 for_each_matching_node(np, pci_ids) { 1080 if (of_device_is_available(np)) { 1081 fsl_pci_primary = np; 1082 of_node_put(np); 1083 return; 1084 } 1085 } 1086 } 1087 1088 static int fsl_pci_probe(struct platform_device *pdev) 1089 { 1090 int ret; 1091 struct device_node *node; 1092 1093 node = pdev->dev.of_node; 1094 ret = fsl_add_bridge(pdev, fsl_pci_primary == node); 1095 1096 mpc85xx_pci_err_probe(pdev); 1097 1098 return 0; 1099 } 1100 1101 #ifdef CONFIG_PM 1102 static int fsl_pci_resume(struct device *dev) 1103 { 1104 struct pci_controller *hose; 1105 struct resource pci_rsrc; 1106 1107 hose = pci_find_hose_for_OF_device(dev->of_node); 1108 if (!hose) 1109 return -ENODEV; 1110 1111 if (of_address_to_resource(dev->of_node, 0, &pci_rsrc)) { 1112 dev_err(dev, "Get pci register base failed."); 1113 return -ENODEV; 1114 } 1115 1116 setup_pci_atmu(hose); 1117 1118 return 0; 1119 } 1120 1121 static const struct dev_pm_ops pci_pm_ops = { 1122 .resume = fsl_pci_resume, 1123 }; 1124 1125 #define PCI_PM_OPS (&pci_pm_ops) 1126 1127 #else 1128 1129 #define PCI_PM_OPS NULL 1130 1131 #endif 1132 1133 static struct platform_driver fsl_pci_driver = { 1134 .driver = { 1135 .name = "fsl-pci", 1136 .pm = PCI_PM_OPS, 1137 .of_match_table = pci_ids, 1138 }, 1139 .probe = fsl_pci_probe, 1140 }; 1141 1142 static int __init fsl_pci_init(void) 1143 { 1144 return platform_driver_register(&fsl_pci_driver); 1145 } 1146 arch_initcall(fsl_pci_init); 1147 #endif 1148