1 /* 2 * MPC83xx/85xx/86xx PCI/PCIE support routing. 3 * 4 * Copyright 2007-2011 Freescale Semiconductor, Inc. 5 * Copyright 2008-2009 MontaVista Software, Inc. 6 * 7 * Initial author: Xianghua Xiao <x.xiao@freescale.com> 8 * Recode: ZHANG WEI <wei.zhang@freescale.com> 9 * Rewrite the routing for Frescale PCI and PCI Express 10 * Roy Zang <tie-fei.zang@freescale.com> 11 * MPC83xx PCI-Express support: 12 * Tony Li <tony.li@freescale.com> 13 * Anton Vorontsov <avorontsov@ru.mvista.com> 14 * 15 * This program is free software; you can redistribute it and/or modify it 16 * under the terms of the GNU General Public License as published by the 17 * Free Software Foundation; either version 2 of the License, or (at your 18 * option) any later version. 19 */ 20 #include <linux/kernel.h> 21 #include <linux/pci.h> 22 #include <linux/delay.h> 23 #include <linux/string.h> 24 #include <linux/init.h> 25 #include <linux/bootmem.h> 26 #include <linux/memblock.h> 27 #include <linux/log2.h> 28 #include <linux/slab.h> 29 30 #include <asm/io.h> 31 #include <asm/prom.h> 32 #include <asm/pci-bridge.h> 33 #include <asm/machdep.h> 34 #include <sysdev/fsl_soc.h> 35 #include <sysdev/fsl_pci.h> 36 37 static int fsl_pcie_bus_fixup, is_mpc83xx_pci; 38 39 static void __init quirk_fsl_pcie_header(struct pci_dev *dev) 40 { 41 u8 progif; 42 43 /* if we aren't a PCIe don't bother */ 44 if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) 45 return; 46 47 /* if we aren't in host mode don't bother */ 48 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); 49 if (progif & 0x1) 50 return; 51 52 dev->class = PCI_CLASS_BRIDGE_PCI << 8; 53 fsl_pcie_bus_fixup = 1; 54 return; 55 } 56 57 static int __init fsl_pcie_check_link(struct pci_controller *hose) 58 { 59 u32 val; 60 61 early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); 62 if (val < PCIE_LTSSM_L0) 63 return 1; 64 return 0; 65 } 66 67 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) 68 69 #define MAX_PHYS_ADDR_BITS 40 70 static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS; 71 72 static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) 73 { 74 if (!dev->dma_mask || !dma_supported(dev, dma_mask)) 75 return -EIO; 76 77 /* 78 * Fixup PCI devices that are able to DMA to above the physical 79 * address width of the SoC such that we can address any internal 80 * SoC address from across PCI if needed 81 */ 82 if ((dev->bus == &pci_bus_type) && 83 dma_mask >= DMA_BIT_MASK(MAX_PHYS_ADDR_BITS)) { 84 set_dma_ops(dev, &dma_direct_ops); 85 set_dma_offset(dev, pci64_dma_offset); 86 } 87 88 *dev->dma_mask = dma_mask; 89 return 0; 90 } 91 92 static int __init setup_one_atmu(struct ccsr_pci __iomem *pci, 93 unsigned int index, const struct resource *res, 94 resource_size_t offset) 95 { 96 resource_size_t pci_addr = res->start - offset; 97 resource_size_t phys_addr = res->start; 98 resource_size_t size = resource_size(res); 99 u32 flags = 0x80044000; /* enable & mem R/W */ 100 unsigned int i; 101 102 pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n", 103 (u64)res->start, (u64)size); 104 105 if (res->flags & IORESOURCE_PREFETCH) 106 flags |= 0x10000000; /* enable relaxed ordering */ 107 108 for (i = 0; size > 0; i++) { 109 unsigned int bits = min(__ilog2(size), 110 __ffs(pci_addr | phys_addr)); 111 112 if (index + i >= 5) 113 return -1; 114 115 out_be32(&pci->pow[index + i].potar, pci_addr >> 12); 116 out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44); 117 out_be32(&pci->pow[index + i].powbar, phys_addr >> 12); 118 out_be32(&pci->pow[index + i].powar, flags | (bits - 1)); 119 120 pci_addr += (resource_size_t)1U << bits; 121 phys_addr += (resource_size_t)1U << bits; 122 size -= (resource_size_t)1U << bits; 123 } 124 125 return i; 126 } 127 128 /* atmu setup for fsl pci/pcie controller */ 129 static void __init setup_pci_atmu(struct pci_controller *hose, 130 struct resource *rsrc) 131 { 132 struct ccsr_pci __iomem *pci; 133 int i, j, n, mem_log, win_idx = 3, start_idx = 1, end_idx = 4; 134 u64 mem, sz, paddr_hi = 0; 135 u64 paddr_lo = ULLONG_MAX; 136 u32 pcicsrbar = 0, pcicsrbar_sz; 137 u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL | 138 PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; 139 char *name = hose->dn->full_name; 140 const u64 *reg; 141 int len; 142 143 pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", 144 (u64)rsrc->start, (u64)resource_size(rsrc)); 145 146 if (of_device_is_compatible(hose->dn, "fsl,qoriq-pcie-v2.2")) { 147 win_idx = 2; 148 start_idx = 0; 149 end_idx = 3; 150 } 151 152 pci = ioremap(rsrc->start, resource_size(rsrc)); 153 if (!pci) { 154 dev_err(hose->parent, "Unable to map ATMU registers\n"); 155 return; 156 } 157 158 /* Disable all windows (except powar0 since it's ignored) */ 159 for(i = 1; i < 5; i++) 160 out_be32(&pci->pow[i].powar, 0); 161 for (i = start_idx; i < end_idx; i++) 162 out_be32(&pci->piw[i].piwar, 0); 163 164 /* Setup outbound MEM window */ 165 for(i = 0, j = 1; i < 3; i++) { 166 if (!(hose->mem_resources[i].flags & IORESOURCE_MEM)) 167 continue; 168 169 paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start); 170 paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end); 171 172 n = setup_one_atmu(pci, j, &hose->mem_resources[i], 173 hose->pci_mem_offset); 174 175 if (n < 0 || j >= 5) { 176 pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i); 177 hose->mem_resources[i].flags |= IORESOURCE_DISABLED; 178 } else 179 j += n; 180 } 181 182 /* Setup outbound IO window */ 183 if (hose->io_resource.flags & IORESOURCE_IO) { 184 if (j >= 5) { 185 pr_err("Ran out of outbound PCI ATMUs for IO resource\n"); 186 } else { 187 pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, " 188 "phy base 0x%016llx.\n", 189 (u64)hose->io_resource.start, 190 (u64)resource_size(&hose->io_resource), 191 (u64)hose->io_base_phys); 192 out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12)); 193 out_be32(&pci->pow[j].potear, 0); 194 out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12)); 195 /* Enable, IO R/W */ 196 out_be32(&pci->pow[j].powar, 0x80088000 197 | (__ilog2(hose->io_resource.end 198 - hose->io_resource.start + 1) - 1)); 199 } 200 } 201 202 /* convert to pci address space */ 203 paddr_hi -= hose->pci_mem_offset; 204 paddr_lo -= hose->pci_mem_offset; 205 206 if (paddr_hi == paddr_lo) { 207 pr_err("%s: No outbound window space\n", name); 208 goto out; 209 } 210 211 if (paddr_lo == 0) { 212 pr_err("%s: No space for inbound window\n", name); 213 goto out; 214 } 215 216 /* setup PCSRBAR/PEXCSRBAR */ 217 early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff); 218 early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz); 219 pcicsrbar_sz = ~pcicsrbar_sz + 1; 220 221 if (paddr_hi < (0x100000000ull - pcicsrbar_sz) || 222 (paddr_lo > 0x100000000ull)) 223 pcicsrbar = 0x100000000ull - pcicsrbar_sz; 224 else 225 pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz; 226 early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar); 227 228 paddr_lo = min(paddr_lo, (u64)pcicsrbar); 229 230 pr_info("%s: PCICSRBAR @ 0x%x\n", name, pcicsrbar); 231 232 /* Setup inbound mem window */ 233 mem = memblock_end_of_DRAM(); 234 235 /* 236 * The msi-address-64 property, if it exists, indicates the physical 237 * address of the MSIIR register. Normally, this register is located 238 * inside CCSR, so the ATMU that covers all of CCSR is used. But if 239 * this property exists, then we normally need to create a new ATMU 240 * for it. For now, however, we cheat. The only entity that creates 241 * this property is the Freescale hypervisor, and the address is 242 * specified in the partition configuration. Typically, the address 243 * is located in the page immediately after the end of DDR. If so, we 244 * can avoid allocating a new ATMU by extending the DDR ATMU by one 245 * page. 246 */ 247 reg = of_get_property(hose->dn, "msi-address-64", &len); 248 if (reg && (len == sizeof(u64))) { 249 u64 address = be64_to_cpup(reg); 250 251 if ((address >= mem) && (address < (mem + PAGE_SIZE))) { 252 pr_info("%s: extending DDR ATMU to cover MSIIR", name); 253 mem += PAGE_SIZE; 254 } else { 255 /* TODO: Create a new ATMU for MSIIR */ 256 pr_warn("%s: msi-address-64 address of %llx is " 257 "unsupported\n", name, address); 258 } 259 } 260 261 sz = min(mem, paddr_lo); 262 mem_log = __ilog2_u64(sz); 263 264 /* PCIe can overmap inbound & outbound since RX & TX are separated */ 265 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { 266 /* Size window to exact size if power-of-two or one size up */ 267 if ((1ull << mem_log) != mem) { 268 if ((1ull << mem_log) > mem) 269 pr_info("%s: Setting PCI inbound window " 270 "greater than memory size\n", name); 271 mem_log++; 272 } 273 274 piwar |= ((mem_log - 1) & PIWAR_SZ_MASK); 275 276 /* Setup inbound memory window */ 277 out_be32(&pci->piw[win_idx].pitar, 0x00000000); 278 out_be32(&pci->piw[win_idx].piwbar, 0x00000000); 279 out_be32(&pci->piw[win_idx].piwar, piwar); 280 win_idx--; 281 282 hose->dma_window_base_cur = 0x00000000; 283 hose->dma_window_size = (resource_size_t)sz; 284 285 /* 286 * if we have >4G of memory setup second PCI inbound window to 287 * let devices that are 64-bit address capable to work w/o 288 * SWIOTLB and access the full range of memory 289 */ 290 if (sz != mem) { 291 mem_log = __ilog2_u64(mem); 292 293 /* Size window up if we dont fit in exact power-of-2 */ 294 if ((1ull << mem_log) != mem) 295 mem_log++; 296 297 piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1); 298 299 /* Setup inbound memory window */ 300 out_be32(&pci->piw[win_idx].pitar, 0x00000000); 301 out_be32(&pci->piw[win_idx].piwbear, 302 pci64_dma_offset >> 44); 303 out_be32(&pci->piw[win_idx].piwbar, 304 pci64_dma_offset >> 12); 305 out_be32(&pci->piw[win_idx].piwar, piwar); 306 307 /* 308 * install our own dma_set_mask handler to fixup dma_ops 309 * and dma_offset 310 */ 311 ppc_md.dma_set_mask = fsl_pci_dma_set_mask; 312 313 pr_info("%s: Setup 64-bit PCI DMA window\n", name); 314 } 315 } else { 316 u64 paddr = 0; 317 318 /* Setup inbound memory window */ 319 out_be32(&pci->piw[win_idx].pitar, paddr >> 12); 320 out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); 321 out_be32(&pci->piw[win_idx].piwar, (piwar | (mem_log - 1))); 322 win_idx--; 323 324 paddr += 1ull << mem_log; 325 sz -= 1ull << mem_log; 326 327 if (sz) { 328 mem_log = __ilog2_u64(sz); 329 piwar |= (mem_log - 1); 330 331 out_be32(&pci->piw[win_idx].pitar, paddr >> 12); 332 out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); 333 out_be32(&pci->piw[win_idx].piwar, piwar); 334 win_idx--; 335 336 paddr += 1ull << mem_log; 337 } 338 339 hose->dma_window_base_cur = 0x00000000; 340 hose->dma_window_size = (resource_size_t)paddr; 341 } 342 343 if (hose->dma_window_size < mem) { 344 #ifndef CONFIG_SWIOTLB 345 pr_err("%s: ERROR: Memory size exceeds PCI ATMU ability to " 346 "map - enable CONFIG_SWIOTLB to avoid dma errors.\n", 347 name); 348 #endif 349 /* adjusting outbound windows could reclaim space in mem map */ 350 if (paddr_hi < 0xffffffffull) 351 pr_warning("%s: WARNING: Outbound window cfg leaves " 352 "gaps in memory map. Adjusting the memory map " 353 "could reduce unnecessary bounce buffering.\n", 354 name); 355 356 pr_info("%s: DMA window size is 0x%llx\n", name, 357 (u64)hose->dma_window_size); 358 } 359 360 out: 361 iounmap(pci); 362 } 363 364 static void __init setup_pci_cmd(struct pci_controller *hose) 365 { 366 u16 cmd; 367 int cap_x; 368 369 early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); 370 cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY 371 | PCI_COMMAND_IO; 372 early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); 373 374 cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX); 375 if (cap_x) { 376 int pci_x_cmd = cap_x + PCI_X_CMD; 377 cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ 378 | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; 379 early_write_config_word(hose, 0, 0, pci_x_cmd, cmd); 380 } else { 381 early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); 382 } 383 } 384 385 void fsl_pcibios_fixup_bus(struct pci_bus *bus) 386 { 387 struct pci_controller *hose = pci_bus_to_host(bus); 388 int i; 389 390 if ((bus->parent == hose->bus) && 391 ((fsl_pcie_bus_fixup && 392 early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) || 393 (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK))) 394 { 395 for (i = 0; i < 4; ++i) { 396 struct resource *res = bus->resource[i]; 397 struct resource *par = bus->parent->resource[i]; 398 if (res) { 399 res->start = 0; 400 res->end = 0; 401 res->flags = 0; 402 } 403 if (res && par) { 404 res->start = par->start; 405 res->end = par->end; 406 res->flags = par->flags; 407 } 408 } 409 } 410 } 411 412 int __init fsl_add_bridge(struct device_node *dev, int is_primary) 413 { 414 int len; 415 struct pci_controller *hose; 416 struct resource rsrc; 417 const int *bus_range; 418 u8 progif; 419 420 if (!of_device_is_available(dev)) { 421 pr_warning("%s: disabled\n", dev->full_name); 422 return -ENODEV; 423 } 424 425 pr_debug("Adding PCI host bridge %s\n", dev->full_name); 426 427 /* Fetch host bridge registers address */ 428 if (of_address_to_resource(dev, 0, &rsrc)) { 429 printk(KERN_WARNING "Can't get pci register base!"); 430 return -ENOMEM; 431 } 432 433 /* Get bus range if any */ 434 bus_range = of_get_property(dev, "bus-range", &len); 435 if (bus_range == NULL || len < 2 * sizeof(int)) 436 printk(KERN_WARNING "Can't get bus-range for %s, assume" 437 " bus 0\n", dev->full_name); 438 439 pci_add_flags(PCI_REASSIGN_ALL_BUS); 440 hose = pcibios_alloc_controller(dev); 441 if (!hose) 442 return -ENOMEM; 443 444 hose->first_busno = bus_range ? bus_range[0] : 0x0; 445 hose->last_busno = bus_range ? bus_range[1] : 0xff; 446 447 setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, 448 PPC_INDIRECT_TYPE_BIG_ENDIAN); 449 450 early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif); 451 if ((progif & 1) == 1) { 452 /* unmap cfg_data & cfg_addr separately if not on same page */ 453 if (((unsigned long)hose->cfg_data & PAGE_MASK) != 454 ((unsigned long)hose->cfg_addr & PAGE_MASK)) 455 iounmap(hose->cfg_data); 456 iounmap(hose->cfg_addr); 457 pcibios_free_controller(hose); 458 return 0; 459 } 460 461 setup_pci_cmd(hose); 462 463 /* check PCI express link status */ 464 if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { 465 hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG | 466 PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; 467 if (fsl_pcie_check_link(hose)) 468 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; 469 } 470 471 printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " 472 "Firmware bus number: %d->%d\n", 473 (unsigned long long)rsrc.start, hose->first_busno, 474 hose->last_busno); 475 476 pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", 477 hose, hose->cfg_addr, hose->cfg_data); 478 479 /* Interpret the "ranges" property */ 480 /* This also maps the I/O region and sets isa_io/mem_base */ 481 pci_process_bridge_OF_ranges(hose, dev, is_primary); 482 483 /* Setup PEX window registers */ 484 setup_pci_atmu(hose, &rsrc); 485 486 return 0; 487 } 488 #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ 489 490 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_pcie_header); 491 492 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) 493 struct mpc83xx_pcie_priv { 494 void __iomem *cfg_type0; 495 void __iomem *cfg_type1; 496 u32 dev_base; 497 }; 498 499 struct pex_inbound_window { 500 u32 ar; 501 u32 tar; 502 u32 barl; 503 u32 barh; 504 }; 505 506 /* 507 * With the convention of u-boot, the PCIE outbound window 0 serves 508 * as configuration transactions outbound. 509 */ 510 #define PEX_OUTWIN0_BAR 0xCA4 511 #define PEX_OUTWIN0_TAL 0xCA8 512 #define PEX_OUTWIN0_TAH 0xCAC 513 #define PEX_RC_INWIN_BASE 0xE60 514 #define PEX_RCIWARn_EN 0x1 515 516 static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn) 517 { 518 struct pci_controller *hose = pci_bus_to_host(bus); 519 520 if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) 521 return PCIBIOS_DEVICE_NOT_FOUND; 522 /* 523 * Workaround for the HW bug: for Type 0 configure transactions the 524 * PCI-E controller does not check the device number bits and just 525 * assumes that the device number bits are 0. 526 */ 527 if (bus->number == hose->first_busno || 528 bus->primary == hose->first_busno) { 529 if (devfn & 0xf8) 530 return PCIBIOS_DEVICE_NOT_FOUND; 531 } 532 533 if (ppc_md.pci_exclude_device) { 534 if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) 535 return PCIBIOS_DEVICE_NOT_FOUND; 536 } 537 538 return PCIBIOS_SUCCESSFUL; 539 } 540 541 static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus, 542 unsigned int devfn, int offset) 543 { 544 struct pci_controller *hose = pci_bus_to_host(bus); 545 struct mpc83xx_pcie_priv *pcie = hose->dn->data; 546 u32 dev_base = bus->number << 24 | devfn << 16; 547 int ret; 548 549 ret = mpc83xx_pcie_exclude_device(bus, devfn); 550 if (ret) 551 return NULL; 552 553 offset &= 0xfff; 554 555 /* Type 0 */ 556 if (bus->number == hose->first_busno) 557 return pcie->cfg_type0 + offset; 558 559 if (pcie->dev_base == dev_base) 560 goto mapped; 561 562 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base); 563 564 pcie->dev_base = dev_base; 565 mapped: 566 return pcie->cfg_type1 + offset; 567 } 568 569 static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, 570 int offset, int len, u32 *val) 571 { 572 void __iomem *cfg_addr; 573 574 cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); 575 if (!cfg_addr) 576 return PCIBIOS_DEVICE_NOT_FOUND; 577 578 switch (len) { 579 case 1: 580 *val = in_8(cfg_addr); 581 break; 582 case 2: 583 *val = in_le16(cfg_addr); 584 break; 585 default: 586 *val = in_le32(cfg_addr); 587 break; 588 } 589 590 return PCIBIOS_SUCCESSFUL; 591 } 592 593 static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, 594 int offset, int len, u32 val) 595 { 596 struct pci_controller *hose = pci_bus_to_host(bus); 597 void __iomem *cfg_addr; 598 599 cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); 600 if (!cfg_addr) 601 return PCIBIOS_DEVICE_NOT_FOUND; 602 603 /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */ 604 if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno) 605 val &= 0xffffff00; 606 607 switch (len) { 608 case 1: 609 out_8(cfg_addr, val); 610 break; 611 case 2: 612 out_le16(cfg_addr, val); 613 break; 614 default: 615 out_le32(cfg_addr, val); 616 break; 617 } 618 619 return PCIBIOS_SUCCESSFUL; 620 } 621 622 static struct pci_ops mpc83xx_pcie_ops = { 623 .read = mpc83xx_pcie_read_config, 624 .write = mpc83xx_pcie_write_config, 625 }; 626 627 static int __init mpc83xx_pcie_setup(struct pci_controller *hose, 628 struct resource *reg) 629 { 630 struct mpc83xx_pcie_priv *pcie; 631 u32 cfg_bar; 632 int ret = -ENOMEM; 633 634 pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL); 635 if (!pcie) 636 return ret; 637 638 pcie->cfg_type0 = ioremap(reg->start, resource_size(reg)); 639 if (!pcie->cfg_type0) 640 goto err0; 641 642 cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR); 643 if (!cfg_bar) { 644 /* PCI-E isn't configured. */ 645 ret = -ENODEV; 646 goto err1; 647 } 648 649 pcie->cfg_type1 = ioremap(cfg_bar, 0x1000); 650 if (!pcie->cfg_type1) 651 goto err1; 652 653 WARN_ON(hose->dn->data); 654 hose->dn->data = pcie; 655 hose->ops = &mpc83xx_pcie_ops; 656 657 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0); 658 out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0); 659 660 if (fsl_pcie_check_link(hose)) 661 hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; 662 663 return 0; 664 err1: 665 iounmap(pcie->cfg_type0); 666 err0: 667 kfree(pcie); 668 return ret; 669 670 } 671 672 int __init mpc83xx_add_bridge(struct device_node *dev) 673 { 674 int ret; 675 int len; 676 struct pci_controller *hose; 677 struct resource rsrc_reg; 678 struct resource rsrc_cfg; 679 const int *bus_range; 680 int primary; 681 682 is_mpc83xx_pci = 1; 683 684 if (!of_device_is_available(dev)) { 685 pr_warning("%s: disabled by the firmware.\n", 686 dev->full_name); 687 return -ENODEV; 688 } 689 pr_debug("Adding PCI host bridge %s\n", dev->full_name); 690 691 /* Fetch host bridge registers address */ 692 if (of_address_to_resource(dev, 0, &rsrc_reg)) { 693 printk(KERN_WARNING "Can't get pci register base!\n"); 694 return -ENOMEM; 695 } 696 697 memset(&rsrc_cfg, 0, sizeof(rsrc_cfg)); 698 699 if (of_address_to_resource(dev, 1, &rsrc_cfg)) { 700 printk(KERN_WARNING 701 "No pci config register base in dev tree, " 702 "using default\n"); 703 /* 704 * MPC83xx supports up to two host controllers 705 * one at 0x8500 has config space registers at 0x8300 706 * one at 0x8600 has config space registers at 0x8380 707 */ 708 if ((rsrc_reg.start & 0xfffff) == 0x8500) 709 rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300; 710 else if ((rsrc_reg.start & 0xfffff) == 0x8600) 711 rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380; 712 } 713 /* 714 * Controller at offset 0x8500 is primary 715 */ 716 if ((rsrc_reg.start & 0xfffff) == 0x8500) 717 primary = 1; 718 else 719 primary = 0; 720 721 /* Get bus range if any */ 722 bus_range = of_get_property(dev, "bus-range", &len); 723 if (bus_range == NULL || len < 2 * sizeof(int)) { 724 printk(KERN_WARNING "Can't get bus-range for %s, assume" 725 " bus 0\n", dev->full_name); 726 } 727 728 pci_add_flags(PCI_REASSIGN_ALL_BUS); 729 hose = pcibios_alloc_controller(dev); 730 if (!hose) 731 return -ENOMEM; 732 733 hose->first_busno = bus_range ? bus_range[0] : 0; 734 hose->last_busno = bus_range ? bus_range[1] : 0xff; 735 736 if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) { 737 ret = mpc83xx_pcie_setup(hose, &rsrc_reg); 738 if (ret) 739 goto err0; 740 } else { 741 setup_indirect_pci(hose, rsrc_cfg.start, 742 rsrc_cfg.start + 4, 0); 743 } 744 745 printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " 746 "Firmware bus number: %d->%d\n", 747 (unsigned long long)rsrc_reg.start, hose->first_busno, 748 hose->last_busno); 749 750 pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", 751 hose, hose->cfg_addr, hose->cfg_data); 752 753 /* Interpret the "ranges" property */ 754 /* This also maps the I/O region and sets isa_io/mem_base */ 755 pci_process_bridge_OF_ranges(hose, dev, primary); 756 757 return 0; 758 err0: 759 pcibios_free_controller(hose); 760 return ret; 761 } 762 #endif /* CONFIG_PPC_83xx */ 763 764 u64 fsl_pci_immrbar_base(struct pci_controller *hose) 765 { 766 #ifdef CONFIG_PPC_83xx 767 if (is_mpc83xx_pci) { 768 struct mpc83xx_pcie_priv *pcie = hose->dn->data; 769 struct pex_inbound_window *in; 770 int i; 771 772 /* Walk the Root Complex Inbound windows to match IMMR base */ 773 in = pcie->cfg_type0 + PEX_RC_INWIN_BASE; 774 for (i = 0; i < 4; i++) { 775 /* not enabled, skip */ 776 if (!in_le32(&in[i].ar) & PEX_RCIWARn_EN) 777 continue; 778 779 if (get_immrbase() == in_le32(&in[i].tar)) 780 return (u64)in_le32(&in[i].barh) << 32 | 781 in_le32(&in[i].barl); 782 } 783 784 printk(KERN_WARNING "could not find PCI BAR matching IMMR\n"); 785 } 786 #endif 787 788 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) 789 if (!is_mpc83xx_pci) { 790 u32 base; 791 792 pci_bus_read_config_dword(hose->bus, 793 PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base); 794 return base; 795 } 796 #endif 797 798 return 0; 799 } 800