1config PPC_PS3 2 bool "Sony PS3" 3 depends on PPC64 && PPC_BOOK3S 4 select PPC_CELL 5 select USB_OHCI_LITTLE_ENDIAN 6 select USB_OHCI_BIG_ENDIAN_MMIO 7 select USB_EHCI_BIG_ENDIAN_MMIO 8 select PPC_PCI_CHOICE 9 help 10 This option enables support for the Sony PS3 game console 11 and other platforms using the PS3 hypervisor. Enabling this 12 option will allow building otheros.bld, a kernel image suitable 13 for programming into flash memory, and vmlinux, a kernel image 14 suitable for loading via kexec. 15 16menu "PS3 Platform Options" 17 depends on PPC_PS3 18 19config PS3_ADVANCED 20 depends on PPC_PS3 21 bool "PS3 Advanced configuration options" 22 help 23 This gives you access to some advanced options for the PS3. The 24 defaults should be fine for most users, but these options may make 25 it possible to better control the kernel configuration if you know 26 what you are doing. 27 28 Note that the answer to this question won't directly affect the 29 kernel: saying N will just cause the configurator to skip all 30 the questions about these options. 31 32 Most users should say N to this question. 33 34config PS3_HTAB_SIZE 35 depends on PPC_PS3 36 int "PS3 Platform pagetable size" if PS3_ADVANCED 37 range 18 20 38 default 20 39 help 40 This option is only for experts who may have the desire to fine 41 tune the pagetable size on their system. The value here is 42 expressed as the log2 of the page table size. Valid values are 43 18, 19, and 20, corresponding to 256KB, 512KB and 1MB respectively. 44 45 If unsure, choose the default (20) with the confidence that your 46 system will have optimal runtime performance. 47 48config PS3_DYNAMIC_DMA 49 depends on PPC_PS3 50 bool "PS3 Platform dynamic DMA page table management" 51 default n 52 help 53 This option will enable kernel support to take advantage of the 54 per device dynamic DMA page table management provided by the Cell 55 processor's IO Controller. This support incurs some runtime 56 overhead and also slightly increases kernel memory usage. The 57 current implementation should be considered experimental. 58 59 This support is mainly for Linux kernel development. If unsure, 60 say N. 61 62config PS3_VUART 63 depends on PPC_PS3 64 tristate 65 66config PS3_PS3AV 67 depends on PPC_PS3 68 tristate "PS3 AV settings driver" if PS3_ADVANCED 69 select PS3_VUART 70 default y 71 help 72 Include support for the PS3 AV Settings driver. 73 74 This support is required for PS3 graphics and sound. In 75 general, all users will say Y or M. 76 77config PS3_SYS_MANAGER 78 depends on PPC_PS3 79 tristate "PS3 System Manager driver" if PS3_ADVANCED 80 select PS3_VUART 81 default y 82 help 83 Include support for the PS3 System Manager. 84 85 This support is required for PS3 system control. In 86 general, all users will say Y or M. 87 88config PS3_REPOSITORY_WRITE 89 bool "PS3 Repository write support" if PS3_ADVANCED 90 depends on PPC_PS3 91 default n 92 help 93 Enables support for writing to the PS3 System Repository. 94 95 This support is intended for bootloaders that need to store data 96 in the repository for later boot stages. 97 98 If in doubt, say N here and reduce the size of the kernel by a 99 small amount. 100 101config PS3_STORAGE 102 depends on PPC_PS3 103 tristate 104 105config PS3_DISK 106 tristate "PS3 Disk Storage Driver" 107 depends on PPC_PS3 && BLOCK 108 select PS3_STORAGE 109 help 110 Include support for the PS3 Disk Storage. 111 112 This support is required to access the PS3 hard disk. 113 In general, all users will say Y or M. 114 115config PS3_ROM 116 tristate "PS3 BD/DVD/CD-ROM Storage Driver" 117 depends on PPC_PS3 && SCSI 118 select PS3_STORAGE 119 help 120 Include support for the PS3 ROM Storage. 121 122 This support is required to access the PS3 BD/DVD/CD-ROM drive. 123 In general, all users will say Y or M. 124 Also make sure to say Y or M to "SCSI CDROM support" later. 125 126config PS3_FLASH 127 tristate "PS3 FLASH ROM Storage Driver" 128 depends on PPC_PS3 129 select PS3_STORAGE 130 help 131 Include support for the PS3 FLASH ROM Storage. 132 133 This support is required to access the PS3 FLASH ROM, which 134 contains the boot loader and some boot options. 135 In general, PS3 OtherOS users will say Y or M. 136 137 As this driver needs a fixed buffer of 256 KiB of memory, it can 138 be disabled on the kernel command line using "ps3flash=off", to 139 not allocate this fixed buffer. 140 141config PS3_VRAM 142 tristate "PS3 Video RAM Storage Driver" 143 depends on FB_PS3=y && BLOCK && m 144 help 145 This driver allows you to use excess PS3 video RAM as volatile 146 storage or system swap. 147 148config PS3_LPM 149 tristate "PS3 Logical Performance Monitor support" 150 depends on PPC_PS3 151 help 152 Include support for the PS3 Logical Performance Monitor. 153 154 This support is required to use the logical performance monitor 155 of the PS3's LV1 hypervisor. 156 157 If you intend to use the advanced performance monitoring and 158 profiling support of the Cell processor with programs like 159 oprofile and perfmon2, then say Y or M, otherwise say N. 160 161config PS3GELIC_UDBG 162 bool "PS3 udbg output via UDP broadcasts on Ethernet" 163 depends on PPC_PS3 164 help 165 Enables udbg early debugging output by sending broadcast UDP 166 via the Ethernet port (UDP port number 18194). 167 168 This driver uses a trivial implementation and is independent 169 from the main PS3 gelic network driver. 170 171 If in doubt, say N here. 172 173endmenu 174