1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * PowerNV OPAL Firmware Update Interface 4 * 5 * Copyright 2013 IBM Corp. 6 */ 7 8 #define DEBUG 9 10 #include <linux/kernel.h> 11 #include <linux/reboot.h> 12 #include <linux/init.h> 13 #include <linux/kobject.h> 14 #include <linux/sysfs.h> 15 #include <linux/slab.h> 16 #include <linux/mm.h> 17 #include <linux/vmalloc.h> 18 #include <linux/pagemap.h> 19 #include <linux/delay.h> 20 21 #include <asm/opal.h> 22 23 /* FLASH status codes */ 24 #define FLASH_NO_OP -1099 /* No operation initiated by user */ 25 #define FLASH_NO_AUTH -9002 /* Not a service authority partition */ 26 27 /* Validate image status values */ 28 #define VALIDATE_IMG_READY -1001 /* Image ready for validation */ 29 #define VALIDATE_IMG_INCOMPLETE -1002 /* User copied < VALIDATE_BUF_SIZE */ 30 31 /* Manage image status values */ 32 #define MANAGE_ACTIVE_ERR -9001 /* Cannot overwrite active img */ 33 34 /* Flash image status values */ 35 #define FLASH_IMG_READY 0 /* Img ready for flash on reboot */ 36 #define FLASH_INVALID_IMG -1003 /* Flash image shorter than expected */ 37 #define FLASH_IMG_NULL_DATA -1004 /* Bad data in sg list entry */ 38 #define FLASH_IMG_BAD_LEN -1005 /* Bad length in sg list entry */ 39 40 /* Manage operation tokens */ 41 #define FLASH_REJECT_TMP_SIDE 0 /* Reject temporary fw image */ 42 #define FLASH_COMMIT_TMP_SIDE 1 /* Commit temporary fw image */ 43 44 /* Update tokens */ 45 #define FLASH_UPDATE_CANCEL 0 /* Cancel update request */ 46 #define FLASH_UPDATE_INIT 1 /* Initiate update */ 47 48 /* Validate image update result tokens */ 49 #define VALIDATE_TMP_UPDATE 0 /* T side will be updated */ 50 #define VALIDATE_FLASH_AUTH 1 /* Partition does not have authority */ 51 #define VALIDATE_INVALID_IMG 2 /* Candidate image is not valid */ 52 #define VALIDATE_CUR_UNKNOWN 3 /* Current fixpack level is unknown */ 53 /* 54 * Current T side will be committed to P side before being replace with new 55 * image, and the new image is downlevel from current image 56 */ 57 #define VALIDATE_TMP_COMMIT_DL 4 58 /* 59 * Current T side will be committed to P side before being replaced with new 60 * image 61 */ 62 #define VALIDATE_TMP_COMMIT 5 63 /* 64 * T side will be updated with a downlevel image 65 */ 66 #define VALIDATE_TMP_UPDATE_DL 6 67 /* 68 * The candidate image's release date is later than the system's firmware 69 * service entitlement date - service warranty period has expired 70 */ 71 #define VALIDATE_OUT_OF_WRNTY 7 72 73 /* Validate buffer size */ 74 #define VALIDATE_BUF_SIZE 4096 75 76 /* XXX: Assume candidate image size is <= 1GB */ 77 #define MAX_IMAGE_SIZE 0x40000000 78 79 /* Image status */ 80 enum { 81 IMAGE_INVALID, 82 IMAGE_LOADING, 83 IMAGE_READY, 84 }; 85 86 /* Candidate image data */ 87 struct image_data_t { 88 int status; 89 void *data; 90 uint32_t size; 91 }; 92 93 /* Candidate image header */ 94 struct image_header_t { 95 uint16_t magic; 96 uint16_t version; 97 uint32_t size; 98 }; 99 100 struct validate_flash_t { 101 int status; /* Return status */ 102 void *buf; /* Candidate image buffer */ 103 uint32_t buf_size; /* Image size */ 104 uint32_t result; /* Update results token */ 105 }; 106 107 struct manage_flash_t { 108 int status; /* Return status */ 109 }; 110 111 struct update_flash_t { 112 int status; /* Return status */ 113 }; 114 115 static struct image_header_t image_header; 116 static struct image_data_t image_data; 117 static struct validate_flash_t validate_flash_data; 118 static struct manage_flash_t manage_flash_data; 119 120 /* Initialize update_flash_data status to No Operation */ 121 static struct update_flash_t update_flash_data = { 122 .status = FLASH_NO_OP, 123 }; 124 125 static DEFINE_MUTEX(image_data_mutex); 126 127 /* 128 * Validate candidate image 129 */ 130 static inline void opal_flash_validate(void) 131 { 132 long ret; 133 void *buf = validate_flash_data.buf; 134 __be32 size = cpu_to_be32(validate_flash_data.buf_size); 135 __be32 result; 136 137 ret = opal_validate_flash(__pa(buf), &size, &result); 138 139 validate_flash_data.status = ret; 140 validate_flash_data.buf_size = be32_to_cpu(size); 141 validate_flash_data.result = be32_to_cpu(result); 142 } 143 144 /* 145 * Validate output format: 146 * validate result token 147 * current image version details 148 * new image version details 149 */ 150 static ssize_t validate_show(struct kobject *kobj, 151 struct kobj_attribute *attr, char *buf) 152 { 153 struct validate_flash_t *args_buf = &validate_flash_data; 154 int len; 155 156 /* Candidate image is not validated */ 157 if (args_buf->status < VALIDATE_TMP_UPDATE) { 158 len = sprintf(buf, "%d\n", args_buf->status); 159 goto out; 160 } 161 162 /* Result token */ 163 len = sprintf(buf, "%d\n", args_buf->result); 164 165 /* Current and candidate image version details */ 166 if ((args_buf->result != VALIDATE_TMP_UPDATE) && 167 (args_buf->result < VALIDATE_CUR_UNKNOWN)) 168 goto out; 169 170 if (args_buf->buf_size > (VALIDATE_BUF_SIZE - len)) { 171 memcpy(buf + len, args_buf->buf, VALIDATE_BUF_SIZE - len); 172 len = VALIDATE_BUF_SIZE; 173 } else { 174 memcpy(buf + len, args_buf->buf, args_buf->buf_size); 175 len += args_buf->buf_size; 176 } 177 out: 178 /* Set status to default */ 179 args_buf->status = FLASH_NO_OP; 180 return len; 181 } 182 183 /* 184 * Validate candidate firmware image 185 * 186 * Note: 187 * We are only interested in first 4K bytes of the 188 * candidate image. 189 */ 190 static ssize_t validate_store(struct kobject *kobj, 191 struct kobj_attribute *attr, 192 const char *buf, size_t count) 193 { 194 struct validate_flash_t *args_buf = &validate_flash_data; 195 196 if (buf[0] != '1') 197 return -EINVAL; 198 199 mutex_lock(&image_data_mutex); 200 201 if (image_data.status != IMAGE_READY || 202 image_data.size < VALIDATE_BUF_SIZE) { 203 args_buf->result = VALIDATE_INVALID_IMG; 204 args_buf->status = VALIDATE_IMG_INCOMPLETE; 205 goto out; 206 } 207 208 /* Copy first 4k bytes of candidate image */ 209 memcpy(args_buf->buf, image_data.data, VALIDATE_BUF_SIZE); 210 211 args_buf->status = VALIDATE_IMG_READY; 212 args_buf->buf_size = VALIDATE_BUF_SIZE; 213 214 /* Validate candidate image */ 215 opal_flash_validate(); 216 217 out: 218 mutex_unlock(&image_data_mutex); 219 return count; 220 } 221 222 /* 223 * Manage flash routine 224 */ 225 static inline void opal_flash_manage(uint8_t op) 226 { 227 struct manage_flash_t *const args_buf = &manage_flash_data; 228 229 args_buf->status = opal_manage_flash(op); 230 } 231 232 /* 233 * Show manage flash status 234 */ 235 static ssize_t manage_show(struct kobject *kobj, 236 struct kobj_attribute *attr, char *buf) 237 { 238 struct manage_flash_t *const args_buf = &manage_flash_data; 239 int rc; 240 241 rc = sprintf(buf, "%d\n", args_buf->status); 242 /* Set status to default*/ 243 args_buf->status = FLASH_NO_OP; 244 return rc; 245 } 246 247 /* 248 * Manage operations: 249 * 0 - Reject 250 * 1 - Commit 251 */ 252 static ssize_t manage_store(struct kobject *kobj, 253 struct kobj_attribute *attr, 254 const char *buf, size_t count) 255 { 256 uint8_t op; 257 switch (buf[0]) { 258 case '0': 259 op = FLASH_REJECT_TMP_SIDE; 260 break; 261 case '1': 262 op = FLASH_COMMIT_TMP_SIDE; 263 break; 264 default: 265 return -EINVAL; 266 } 267 268 /* commit/reject temporary image */ 269 opal_flash_manage(op); 270 return count; 271 } 272 273 /* 274 * OPAL update flash 275 */ 276 static int opal_flash_update(int op) 277 { 278 struct opal_sg_list *list; 279 unsigned long addr; 280 int64_t rc = OPAL_PARAMETER; 281 282 if (op == FLASH_UPDATE_CANCEL) { 283 pr_alert("FLASH: Image update cancelled\n"); 284 addr = '\0'; 285 goto flash; 286 } 287 288 list = opal_vmalloc_to_sg_list(image_data.data, image_data.size); 289 if (!list) 290 goto invalid_img; 291 292 /* First entry address */ 293 addr = __pa(list); 294 295 flash: 296 rc = opal_update_flash(addr); 297 298 invalid_img: 299 return rc; 300 } 301 302 /* This gets called just before system reboots */ 303 void opal_flash_update_print_message(void) 304 { 305 if (update_flash_data.status != FLASH_IMG_READY) 306 return; 307 308 pr_alert("FLASH: Flashing new firmware\n"); 309 pr_alert("FLASH: Image is %u bytes\n", image_data.size); 310 pr_alert("FLASH: Performing flash and reboot/shutdown\n"); 311 pr_alert("FLASH: This will take several minutes. Do not power off!\n"); 312 313 /* Small delay to help getting the above message out */ 314 msleep(500); 315 } 316 317 /* 318 * Show candidate image status 319 */ 320 static ssize_t update_show(struct kobject *kobj, 321 struct kobj_attribute *attr, char *buf) 322 { 323 struct update_flash_t *const args_buf = &update_flash_data; 324 return sprintf(buf, "%d\n", args_buf->status); 325 } 326 327 /* 328 * Set update image flag 329 * 1 - Flash new image 330 * 0 - Cancel flash request 331 */ 332 static ssize_t update_store(struct kobject *kobj, 333 struct kobj_attribute *attr, 334 const char *buf, size_t count) 335 { 336 struct update_flash_t *const args_buf = &update_flash_data; 337 int rc = count; 338 339 mutex_lock(&image_data_mutex); 340 341 switch (buf[0]) { 342 case '0': 343 if (args_buf->status == FLASH_IMG_READY) 344 opal_flash_update(FLASH_UPDATE_CANCEL); 345 args_buf->status = FLASH_NO_OP; 346 break; 347 case '1': 348 /* Image is loaded? */ 349 if (image_data.status == IMAGE_READY) 350 args_buf->status = 351 opal_flash_update(FLASH_UPDATE_INIT); 352 else 353 args_buf->status = FLASH_INVALID_IMG; 354 break; 355 default: 356 rc = -EINVAL; 357 } 358 359 mutex_unlock(&image_data_mutex); 360 return rc; 361 } 362 363 /* 364 * Free image buffer 365 */ 366 static void free_image_buf(void) 367 { 368 void *addr; 369 int size; 370 371 addr = image_data.data; 372 size = PAGE_ALIGN(image_data.size); 373 while (size > 0) { 374 ClearPageReserved(vmalloc_to_page(addr)); 375 addr += PAGE_SIZE; 376 size -= PAGE_SIZE; 377 } 378 vfree(image_data.data); 379 image_data.data = NULL; 380 image_data.status = IMAGE_INVALID; 381 } 382 383 /* 384 * Allocate image buffer. 385 */ 386 static int alloc_image_buf(char *buffer, size_t count) 387 { 388 void *addr; 389 int size; 390 391 if (count < sizeof(image_header)) { 392 pr_warn("FLASH: Invalid candidate image\n"); 393 return -EINVAL; 394 } 395 396 memcpy(&image_header, (void *)buffer, sizeof(image_header)); 397 image_data.size = be32_to_cpu(image_header.size); 398 pr_debug("FLASH: Candidate image size = %u\n", image_data.size); 399 400 if (image_data.size > MAX_IMAGE_SIZE) { 401 pr_warn("FLASH: Too large image\n"); 402 return -EINVAL; 403 } 404 if (image_data.size < VALIDATE_BUF_SIZE) { 405 pr_warn("FLASH: Image is shorter than expected\n"); 406 return -EINVAL; 407 } 408 409 image_data.data = vzalloc(PAGE_ALIGN(image_data.size)); 410 if (!image_data.data) { 411 pr_err("%s : Failed to allocate memory\n", __func__); 412 return -ENOMEM; 413 } 414 415 /* Pin memory */ 416 addr = image_data.data; 417 size = PAGE_ALIGN(image_data.size); 418 while (size > 0) { 419 SetPageReserved(vmalloc_to_page(addr)); 420 addr += PAGE_SIZE; 421 size -= PAGE_SIZE; 422 } 423 424 image_data.status = IMAGE_LOADING; 425 return 0; 426 } 427 428 /* 429 * Copy candidate image 430 * 431 * Parse candidate image header to get total image size 432 * and pre-allocate required memory. 433 */ 434 static ssize_t image_data_write(struct file *filp, struct kobject *kobj, 435 struct bin_attribute *bin_attr, 436 char *buffer, loff_t pos, size_t count) 437 { 438 int rc; 439 440 mutex_lock(&image_data_mutex); 441 442 /* New image ? */ 443 if (pos == 0) { 444 /* Free memory, if already allocated */ 445 if (image_data.data) 446 free_image_buf(); 447 448 /* Cancel outstanding image update request */ 449 if (update_flash_data.status == FLASH_IMG_READY) 450 opal_flash_update(FLASH_UPDATE_CANCEL); 451 452 /* Allocate memory */ 453 rc = alloc_image_buf(buffer, count); 454 if (rc) 455 goto out; 456 } 457 458 if (image_data.status != IMAGE_LOADING) { 459 rc = -ENOMEM; 460 goto out; 461 } 462 463 if ((pos + count) > image_data.size) { 464 rc = -EINVAL; 465 goto out; 466 } 467 468 memcpy(image_data.data + pos, (void *)buffer, count); 469 rc = count; 470 471 /* Set image status */ 472 if ((pos + count) == image_data.size) { 473 pr_debug("FLASH: Candidate image loaded....\n"); 474 image_data.status = IMAGE_READY; 475 } 476 477 out: 478 mutex_unlock(&image_data_mutex); 479 return rc; 480 } 481 482 /* 483 * sysfs interface : 484 * OPAL uses below sysfs files for code update. 485 * We create these files under /sys/firmware/opal. 486 * 487 * image : Interface to load candidate firmware image 488 * validate_flash : Validate firmware image 489 * manage_flash : Commit/Reject firmware image 490 * update_flash : Flash new firmware image 491 * 492 */ 493 static const struct bin_attribute image_data_attr = { 494 .attr = {.name = "image", .mode = 0200}, 495 .size = MAX_IMAGE_SIZE, /* Limit image size */ 496 .write = image_data_write, 497 }; 498 499 static struct kobj_attribute validate_attribute = 500 __ATTR(validate_flash, 0600, validate_show, validate_store); 501 502 static struct kobj_attribute manage_attribute = 503 __ATTR(manage_flash, 0600, manage_show, manage_store); 504 505 static struct kobj_attribute update_attribute = 506 __ATTR(update_flash, 0600, update_show, update_store); 507 508 static struct attribute *image_op_attrs[] = { 509 &validate_attribute.attr, 510 &manage_attribute.attr, 511 &update_attribute.attr, 512 NULL /* need to NULL terminate the list of attributes */ 513 }; 514 515 static const struct attribute_group image_op_attr_group = { 516 .attrs = image_op_attrs, 517 }; 518 519 void __init opal_flash_update_init(void) 520 { 521 int ret; 522 523 /* Allocate validate image buffer */ 524 validate_flash_data.buf = kzalloc(VALIDATE_BUF_SIZE, GFP_KERNEL); 525 if (!validate_flash_data.buf) { 526 pr_err("%s : Failed to allocate memory\n", __func__); 527 return; 528 } 529 530 /* Make sure /sys/firmware/opal directory is created */ 531 if (!opal_kobj) { 532 pr_warn("FLASH: opal kobject is not available\n"); 533 goto nokobj; 534 } 535 536 /* Create the sysfs files */ 537 ret = sysfs_create_group(opal_kobj, &image_op_attr_group); 538 if (ret) { 539 pr_warn("FLASH: Failed to create sysfs files\n"); 540 goto nokobj; 541 } 542 543 ret = sysfs_create_bin_file(opal_kobj, &image_data_attr); 544 if (ret) { 545 pr_warn("FLASH: Failed to create sysfs files\n"); 546 goto nosysfs_file; 547 } 548 549 /* Set default status */ 550 validate_flash_data.status = FLASH_NO_OP; 551 manage_flash_data.status = FLASH_NO_OP; 552 update_flash_data.status = FLASH_NO_OP; 553 image_data.status = IMAGE_INVALID; 554 return; 555 556 nosysfs_file: 557 sysfs_remove_group(opal_kobj, &image_op_attr_group); 558 559 nokobj: 560 kfree(validate_flash_data.buf); 561 return; 562 } 563