xref: /linux/arch/powerpc/platforms/powermac/time.c (revision de2fe5e07d58424bc286fff3fd3c1b0bf933cd58)
1 /*
2  * Support for periodic interrupts (100 per second) and for getting
3  * the current time from the RTC on Power Macintoshes.
4  *
5  * We use the decrementer register for our periodic interrupts.
6  *
7  * Paul Mackerras	August 1996.
8  * Copyright (C) 1996 Paul Mackerras.
9  * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
10  *
11  */
12 #include <linux/config.h>
13 #include <linux/errno.h>
14 #include <linux/sched.h>
15 #include <linux/kernel.h>
16 #include <linux/param.h>
17 #include <linux/string.h>
18 #include <linux/mm.h>
19 #include <linux/init.h>
20 #include <linux/time.h>
21 #include <linux/adb.h>
22 #include <linux/cuda.h>
23 #include <linux/pmu.h>
24 #include <linux/interrupt.h>
25 #include <linux/hardirq.h>
26 #include <linux/rtc.h>
27 
28 #include <asm/sections.h>
29 #include <asm/prom.h>
30 #include <asm/system.h>
31 #include <asm/io.h>
32 #include <asm/pgtable.h>
33 #include <asm/machdep.h>
34 #include <asm/time.h>
35 #include <asm/nvram.h>
36 #include <asm/smu.h>
37 
38 #undef DEBUG
39 
40 #ifdef DEBUG
41 #define DBG(x...) printk(x)
42 #else
43 #define DBG(x...)
44 #endif
45 
46 /* Apparently the RTC stores seconds since 1 Jan 1904 */
47 #define RTC_OFFSET	2082844800
48 
49 /*
50  * Calibrate the decrementer frequency with the VIA timer 1.
51  */
52 #define VIA_TIMER_FREQ_6	4700000	/* time 1 frequency * 6 */
53 
54 /* VIA registers */
55 #define RS		0x200		/* skip between registers */
56 #define T1CL		(4*RS)		/* Timer 1 ctr/latch (low 8 bits) */
57 #define T1CH		(5*RS)		/* Timer 1 counter (high 8 bits) */
58 #define T1LL		(6*RS)		/* Timer 1 latch (low 8 bits) */
59 #define T1LH		(7*RS)		/* Timer 1 latch (high 8 bits) */
60 #define ACR		(11*RS)		/* Auxiliary control register */
61 #define IFR		(13*RS)		/* Interrupt flag register */
62 
63 /* Bits in ACR */
64 #define T1MODE		0xc0		/* Timer 1 mode */
65 #define T1MODE_CONT	0x40		/*  continuous interrupts */
66 
67 /* Bits in IFR and IER */
68 #define T1_INT		0x40		/* Timer 1 interrupt */
69 
70 long __init pmac_time_init(void)
71 {
72 	s32 delta = 0;
73 #ifdef CONFIG_NVRAM
74 	int dst;
75 
76 	delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
77 	delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
78 	delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
79 	if (delta & 0x00800000UL)
80 		delta |= 0xFF000000UL;
81 	dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
82 	printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
83 		dst ? "on" : "off");
84 #endif
85 	return delta;
86 }
87 
88 static void to_rtc_time(unsigned long now, struct rtc_time *tm)
89 {
90 	to_tm(now, tm);
91 	tm->tm_year -= 1900;
92 	tm->tm_mon -= 1;
93 }
94 
95 static unsigned long from_rtc_time(struct rtc_time *tm)
96 {
97 	return mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
98 		      tm->tm_hour, tm->tm_min, tm->tm_sec);
99 }
100 
101 #ifdef CONFIG_ADB_CUDA
102 static unsigned long cuda_get_time(void)
103 {
104 	struct adb_request req;
105 	unsigned int now;
106 
107 	if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
108 		return 0;
109 	while (!req.complete)
110 		cuda_poll();
111 	if (req.reply_len != 7)
112 		printk(KERN_ERR "cuda_get_time: got %d byte reply\n",
113 		       req.reply_len);
114 	now = (req.reply[3] << 24) + (req.reply[4] << 16)
115 		+ (req.reply[5] << 8) + req.reply[6];
116 	return ((unsigned long)now) - RTC_OFFSET;
117 }
118 
119 #define cuda_get_rtc_time(tm)	to_rtc_time(cuda_get_time(), (tm))
120 
121 static int cuda_set_rtc_time(struct rtc_time *tm)
122 {
123 	unsigned int nowtime;
124 	struct adb_request req;
125 
126 	nowtime = from_rtc_time(tm) + RTC_OFFSET;
127 	if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
128 			 nowtime >> 24, nowtime >> 16, nowtime >> 8,
129 			 nowtime) < 0)
130 		return -ENXIO;
131 	while (!req.complete)
132 		cuda_poll();
133 	if ((req.reply_len != 3) && (req.reply_len != 7))
134 		printk(KERN_ERR "cuda_set_rtc_time: got %d byte reply\n",
135 		       req.reply_len);
136 	return 0;
137 }
138 
139 #else
140 #define cuda_get_time()		0
141 #define cuda_get_rtc_time(tm)
142 #define cuda_set_rtc_time(tm)	0
143 #endif
144 
145 #ifdef CONFIG_ADB_PMU
146 static unsigned long pmu_get_time(void)
147 {
148 	struct adb_request req;
149 	unsigned int now;
150 
151 	if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
152 		return 0;
153 	pmu_wait_complete(&req);
154 	if (req.reply_len != 4)
155 		printk(KERN_ERR "pmu_get_time: got %d byte reply from PMU\n",
156 		       req.reply_len);
157 	now = (req.reply[0] << 24) + (req.reply[1] << 16)
158 		+ (req.reply[2] << 8) + req.reply[3];
159 	return ((unsigned long)now) - RTC_OFFSET;
160 }
161 
162 #define pmu_get_rtc_time(tm)	to_rtc_time(pmu_get_time(), (tm))
163 
164 static int pmu_set_rtc_time(struct rtc_time *tm)
165 {
166 	unsigned int nowtime;
167 	struct adb_request req;
168 
169 	nowtime = from_rtc_time(tm) + RTC_OFFSET;
170 	if (pmu_request(&req, NULL, 5, PMU_SET_RTC, nowtime >> 24,
171 			nowtime >> 16, nowtime >> 8, nowtime) < 0)
172 		return -ENXIO;
173 	pmu_wait_complete(&req);
174 	if (req.reply_len != 0)
175 		printk(KERN_ERR "pmu_set_rtc_time: %d byte reply from PMU\n",
176 		       req.reply_len);
177 	return 0;
178 }
179 
180 #else
181 #define pmu_get_time()		0
182 #define pmu_get_rtc_time(tm)
183 #define pmu_set_rtc_time(tm)	0
184 #endif
185 
186 #ifdef CONFIG_PMAC_SMU
187 static unsigned long smu_get_time(void)
188 {
189 	struct rtc_time tm;
190 
191 	if (smu_get_rtc_time(&tm, 1))
192 		return 0;
193 	return from_rtc_time(&tm);
194 }
195 
196 #else
197 #define smu_get_time()			0
198 #define smu_get_rtc_time(tm, spin)
199 #define smu_set_rtc_time(tm, spin)	0
200 #endif
201 
202 /* Can't be __init, it's called when suspending and resuming */
203 unsigned long pmac_get_boot_time(void)
204 {
205 	/* Get the time from the RTC, used only at boot time */
206 	switch (sys_ctrler) {
207 	case SYS_CTRLER_CUDA:
208 		return cuda_get_time();
209 	case SYS_CTRLER_PMU:
210 		return pmu_get_time();
211 	case SYS_CTRLER_SMU:
212 		return smu_get_time();
213 	default:
214 		return 0;
215 	}
216 }
217 
218 void pmac_get_rtc_time(struct rtc_time *tm)
219 {
220 	/* Get the time from the RTC, used only at boot time */
221 	switch (sys_ctrler) {
222 	case SYS_CTRLER_CUDA:
223 		cuda_get_rtc_time(tm);
224 		break;
225 	case SYS_CTRLER_PMU:
226 		pmu_get_rtc_time(tm);
227 		break;
228 	case SYS_CTRLER_SMU:
229 		smu_get_rtc_time(tm, 1);
230 		break;
231 	default:
232 		;
233 	}
234 }
235 
236 int pmac_set_rtc_time(struct rtc_time *tm)
237 {
238 	switch (sys_ctrler) {
239 	case SYS_CTRLER_CUDA:
240 		return cuda_set_rtc_time(tm);
241 	case SYS_CTRLER_PMU:
242 		return pmu_set_rtc_time(tm);
243 	case SYS_CTRLER_SMU:
244 		return smu_set_rtc_time(tm, 1);
245 	default:
246 		return -ENODEV;
247 	}
248 }
249 
250 #ifdef CONFIG_PPC32
251 /*
252  * Calibrate the decrementer register using VIA timer 1.
253  * This is used both on powermacs and CHRP machines.
254  */
255 int __init via_calibrate_decr(void)
256 {
257 	struct device_node *vias;
258 	volatile unsigned char __iomem *via;
259 	int count = VIA_TIMER_FREQ_6 / 100;
260 	unsigned int dstart, dend;
261 	struct resource rsrc;
262 
263 	vias = of_find_node_by_name(NULL, "via-cuda");
264 	if (vias == 0)
265 		vias = of_find_node_by_name(NULL, "via-pmu");
266 	if (vias == 0)
267 		vias = of_find_node_by_name(NULL, "via");
268 	if (vias == 0 || of_address_to_resource(vias, 0, &rsrc))
269 		return 0;
270 	via = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
271 	if (via == NULL) {
272 		printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
273 		return 0;
274 	}
275 
276 	/* set timer 1 for continuous interrupts */
277 	out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
278 	/* set the counter to a small value */
279 	out_8(&via[T1CH], 2);
280 	/* set the latch to `count' */
281 	out_8(&via[T1LL], count);
282 	out_8(&via[T1LH], count >> 8);
283 	/* wait until it hits 0 */
284 	while ((in_8(&via[IFR]) & T1_INT) == 0)
285 		;
286 	dstart = get_dec();
287 	/* clear the interrupt & wait until it hits 0 again */
288 	in_8(&via[T1CL]);
289 	while ((in_8(&via[IFR]) & T1_INT) == 0)
290 		;
291 	dend = get_dec();
292 
293 	ppc_tb_freq = (dstart - dend) * 100 / 6;
294 
295 	iounmap(via);
296 
297 	return 1;
298 }
299 #endif
300 
301 #ifdef CONFIG_PM
302 /*
303  * Reset the time after a sleep.
304  */
305 static int
306 time_sleep_notify(struct pmu_sleep_notifier *self, int when)
307 {
308 	static unsigned long time_diff;
309 	unsigned long flags;
310 	unsigned long seq;
311 	struct timespec tv;
312 
313 	switch (when) {
314 	case PBOOK_SLEEP_NOW:
315 		do {
316 			seq = read_seqbegin_irqsave(&xtime_lock, flags);
317 			time_diff = xtime.tv_sec - pmac_get_boot_time();
318 		} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
319 		break;
320 	case PBOOK_WAKE:
321 		tv.tv_sec = pmac_get_boot_time() + time_diff;
322 		tv.tv_nsec = 0;
323 		do_settimeofday(&tv);
324 		break;
325 	}
326 	return PBOOK_SLEEP_OK;
327 }
328 
329 static struct pmu_sleep_notifier time_sleep_notifier = {
330 	time_sleep_notify, SLEEP_LEVEL_MISC,
331 };
332 #endif /* CONFIG_PM */
333 
334 /*
335  * Query the OF and get the decr frequency.
336  */
337 void __init pmac_calibrate_decr(void)
338 {
339 #if defined(CONFIG_PM) && defined(CONFIG_ADB_PMU)
340 	/* XXX why here? */
341 	pmu_register_sleep_notifier(&time_sleep_notifier);
342 #endif
343 
344 	generic_calibrate_decr();
345 
346 #ifdef CONFIG_PPC32
347 	/* We assume MacRISC2 machines have correct device-tree
348 	 * calibration. That's better since the VIA itself seems
349 	 * to be slightly off. --BenH
350 	 */
351 	if (!machine_is_compatible("MacRISC2") &&
352 	    !machine_is_compatible("MacRISC3") &&
353 	    !machine_is_compatible("MacRISC4"))
354 		if (via_calibrate_decr())
355 			return;
356 
357 	/* Special case: QuickSilver G4s seem to have a badly calibrated
358 	 * timebase-frequency in OF, VIA is much better on these. We should
359 	 * probably implement calibration based on the KL timer on these
360 	 * machines anyway... -BenH
361 	 */
362 	if (machine_is_compatible("PowerMac3,5"))
363 		if (via_calibrate_decr())
364 			return;
365 #endif
366 }
367