xref: /linux/arch/powerpc/platforms/embedded6xx/mpc10x.h (revision da1d9caf95def6f0320819cf941c9fd1069ba9e1)
1 /*
2  * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
3  * ctlr/EPIC/etc.
4  *
5  * Author: Mark A. Greer
6  *         mgreer@mvista.com
7  *
8  * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
9  * the terms of the GNU General Public License version 2.  This program
10  * is licensed "as is" without any warranty of any kind, whether express
11  * or implied.
12  */
13 #ifndef __PPC_KERNEL_MPC10X_H
14 #define __PPC_KERNEL_MPC10X_H
15 
16 #include <linux/pci_ids.h>
17 #include <asm/pci-bridge.h>
18 
19 /*
20  * The values here don't completely map everything but should work in most
21  * cases.
22  *
23  * MAP A (PReP Map)
24  *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
25  *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
26  *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
27  *
28  * MAP B (CHRP Map)
29  *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
30  *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
31  *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
32  */
33 
34 /*
35  * Define the vendor/device IDs for the various bridges--should be added to
36  * <linux/pci_ids.h>
37  */
38 #define	MPC10X_BRIDGE_106	((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) |  \
39 				  PCI_VENDOR_ID_MOTOROLA)
40 #define	MPC10X_BRIDGE_8240	((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
41 #define	MPC10X_BRIDGE_107	((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
42 #define	MPC10X_BRIDGE_8245	((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
43 
44 /* Define the type of map to use */
45 #define	MPC10X_MEM_MAP_A		1
46 #define	MPC10X_MEM_MAP_B		2
47 
48 /* Map A (PReP Map) Defines */
49 #define	MPC10X_MAPA_CNFG_ADDR		0x80000cf8
50 #define	MPC10X_MAPA_CNFG_DATA		0x80000cfc
51 
52 #define MPC10X_MAPA_ISA_IO_BASE		0x80000000
53 #define MPC10X_MAPA_ISA_MEM_BASE	0xc0000000
54 #define	MPC10X_MAPA_DRAM_OFFSET		0x80000000
55 
56 #define	MPC10X_MAPA_PCI_INTACK_ADDR	0xbffffff0
57 #define	MPC10X_MAPA_PCI_IO_START	0x00000000
58 #define	MPC10X_MAPA_PCI_IO_END	       (0x00800000 - 1)
59 #define	MPC10X_MAPA_PCI_MEM_START	0x00000000
60 #define	MPC10X_MAPA_PCI_MEM_END	       (0x20000000 - 1)
61 
62 #define	MPC10X_MAPA_PCI_MEM_OFFSET	(MPC10X_MAPA_ISA_MEM_BASE -	\
63 					 MPC10X_MAPA_PCI_MEM_START)
64 
65 /* Map B (CHRP Map) Defines */
66 #define	MPC10X_MAPB_CNFG_ADDR		0xfec00000
67 #define	MPC10X_MAPB_CNFG_DATA		0xfee00000
68 
69 #define MPC10X_MAPB_ISA_IO_BASE		0xfe000000
70 #define MPC10X_MAPB_ISA_MEM_BASE	0x80000000
71 #define	MPC10X_MAPB_DRAM_OFFSET		0x00000000
72 
73 #define	MPC10X_MAPB_PCI_INTACK_ADDR	0xfef00000
74 #define	MPC10X_MAPB_PCI_IO_START	0x00000000
75 #define	MPC10X_MAPB_PCI_IO_END	       (0x00c00000 - 1)
76 #define	MPC10X_MAPB_PCI_MEM_START	0x80000000
77 #define	MPC10X_MAPB_PCI_MEM_END	       (0xc0000000 - 1)
78 
79 #define	MPC10X_MAPB_PCI_MEM_OFFSET	(MPC10X_MAPB_ISA_MEM_BASE -	\
80 					 MPC10X_MAPB_PCI_MEM_START)
81 
82 /* Miscellaneous Configuration register offsets */
83 #define	MPC10X_CFG_PIR_REG		0x09
84 #define	MPC10X_CFG_PIR_HOST_BRIDGE	0x00
85 #define	MPC10X_CFG_PIR_AGENT		0x01
86 
87 #define	MPC10X_CFG_EUMBBAR		0x78
88 
89 #define	MPC10X_CFG_PICR1_REG		0xa8
90 #define	MPC10X_CFG_PICR1_ADDR_MAP_MASK	0x00010000
91 #define	MPC10X_CFG_PICR1_ADDR_MAP_A	0x00010000
92 #define	MPC10X_CFG_PICR1_ADDR_MAP_B	0x00000000
93 #define	MPC10X_CFG_PICR1_SPEC_PCI_RD	0x00000004
94 #define	MPC10X_CFG_PICR1_ST_GATH_EN	0x00000040
95 
96 #define	MPC10X_CFG_PICR2_REG		0xac
97 #define	MPC10X_CFG_PICR2_COPYBACK_OPT	0x00000001
98 
99 #define	MPC10X_CFG_MAPB_OPTIONS_REG	0xe0
100 #define	MPC10X_CFG_MAPB_OPTIONS_CFAE	0x80	/* CPU_FD_ALIAS_EN */
101 #define	MPC10X_CFG_MAPB_OPTIONS_PFAE	0x40	/* PCI_FD_ALIAS_EN */
102 #define	MPC10X_CFG_MAPB_OPTIONS_DR	0x20	/* DLL_RESET */
103 #define	MPC10X_CFG_MAPB_OPTIONS_PCICH	0x08	/* PCI_COMPATIBILITY_HOLE */
104 #define	MPC10X_CFG_MAPB_OPTIONS_PROCCH	0x04	/* PROC_COMPATIBILITY_HOLE */
105 
106 /* Define offsets for the memory controller registers in the config space */
107 #define MPC10X_MCTLR_MEM_START_1	0x80	/* Banks 0-3 */
108 #define MPC10X_MCTLR_MEM_START_2	0x84	/* Banks 4-7 */
109 #define MPC10X_MCTLR_EXT_MEM_START_1	0x88	/* Banks 0-3 */
110 #define MPC10X_MCTLR_EXT_MEM_START_2	0x8c	/* Banks 4-7 */
111 
112 #define MPC10X_MCTLR_MEM_END_1		0x90	/* Banks 0-3 */
113 #define MPC10X_MCTLR_MEM_END_2		0x94	/* Banks 4-7 */
114 #define MPC10X_MCTLR_EXT_MEM_END_1	0x98	/* Banks 0-3 */
115 #define MPC10X_MCTLR_EXT_MEM_END_2	0x9c	/* Banks 4-7 */
116 
117 #define MPC10X_MCTLR_MEM_BANK_ENABLES	0xa0
118 
119 /* Define some offset in the EUMB */
120 #define	MPC10X_EUMB_SIZE		0x00100000 /* Total EUMB size (1MB) */
121 
122 #define MPC10X_EUMB_MU_OFFSET		0x00000000 /* Msg Unit reg offset */
123 #define MPC10X_EUMB_MU_SIZE		0x00001000 /* Msg Unit reg size */
124 #define MPC10X_EUMB_DMA_OFFSET		0x00001000 /* DMA Unit reg offset */
125 #define MPC10X_EUMB_DMA_SIZE		0x00001000 /* DMA Unit reg size  */
126 #define MPC10X_EUMB_ATU_OFFSET		0x00002000 /* Addr xlate reg offset */
127 #define MPC10X_EUMB_ATU_SIZE		0x00001000 /* Addr xlate reg size  */
128 #define MPC10X_EUMB_I2C_OFFSET		0x00003000 /* I2C Unit reg offset */
129 #define MPC10X_EUMB_I2C_SIZE		0x00001000 /* I2C Unit reg size  */
130 #define MPC10X_EUMB_DUART_OFFSET	0x00004000 /* DUART Unit reg offset (8245) */
131 #define MPC10X_EUMB_DUART_SIZE		0x00001000 /* DUART Unit reg size (8245) */
132 #define	MPC10X_EUMB_EPIC_OFFSET		0x00040000 /* EPIC offset in EUMB */
133 #define	MPC10X_EUMB_EPIC_SIZE		0x00030000 /* EPIC size */
134 #define MPC10X_EUMB_PM_OFFSET		0x000fe000 /* Performance Monitor reg offset (8245) */
135 #define MPC10X_EUMB_PM_SIZE		0x00001000 /* Performance Monitor reg size (8245) */
136 #define MPC10X_EUMB_WP_OFFSET		0x000ff000 /* Data path diagnostic, watchpoint reg offset */
137 #define MPC10X_EUMB_WP_SIZE		0x00001000 /* Data path diagnostic, watchpoint reg size */
138 
139 enum ppc_sys_devices {
140 	MPC10X_IIC1,
141 	MPC10X_DMA0,
142 	MPC10X_DMA1,
143 	MPC10X_UART0,
144 	MPC10X_UART1,
145 	NUM_PPC_SYS_DEVS,
146 };
147 
148 int mpc10x_bridge_init(struct pci_controller *hose,
149 		       uint current_map,
150 		       uint new_map,
151 		       uint phys_eumb_base);
152 unsigned long mpc10x_get_mem_size(uint mem_map);
153 int mpc10x_enable_store_gathering(struct pci_controller *hose);
154 int mpc10x_disable_store_gathering(struct pci_controller *hose);
155 
156 /* For MPC107 boards that use the built-in openpic */
157 void mpc10x_set_openpic(void);
158 
159 #endif	/* __PPC_KERNEL_MPC10X_H */
160