1 /* 2 * Platform setup for the Freescale mpc885ads board 3 * 4 * Vitaly Bordug <vbordug@ru.mvista.com> 5 * 6 * Copyright 2005 MontaVista Software Inc. 7 * 8 * Heavily modified by Scott Wood <scottwood@freescale.com> 9 * Copyright 2007 Freescale Semiconductor, Inc. 10 * 11 * This file is licensed under the terms of the GNU General Public License 12 * version 2. This program is licensed "as is" without any warranty of any 13 * kind, whether express or implied. 14 */ 15 16 #include <linux/init.h> 17 #include <linux/module.h> 18 #include <linux/param.h> 19 #include <linux/string.h> 20 #include <linux/ioport.h> 21 #include <linux/device.h> 22 #include <linux/delay.h> 23 24 #include <linux/fs_enet_pd.h> 25 #include <linux/fs_uart_pd.h> 26 #include <linux/fsl_devices.h> 27 #include <linux/mii.h> 28 #include <linux/of_address.h> 29 #include <linux/of_fdt.h> 30 #include <linux/of_platform.h> 31 32 #include <asm/delay.h> 33 #include <asm/io.h> 34 #include <asm/machdep.h> 35 #include <asm/page.h> 36 #include <asm/processor.h> 37 #include <asm/time.h> 38 #include <asm/8xx_immap.h> 39 #include <asm/cpm1.h> 40 #include <asm/fs_pd.h> 41 #include <asm/udbg.h> 42 43 #include "mpc885ads.h" 44 #include "mpc8xx.h" 45 46 static u32 __iomem *bcsr, *bcsr5; 47 48 struct cpm_pin { 49 int port, pin, flags; 50 }; 51 52 static struct cpm_pin mpc885ads_pins[] = { 53 /* SMC1 */ 54 {CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */ 55 {CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ 56 57 /* SMC2 */ 58 #ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2 59 {CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */ 60 {CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */ 61 #endif 62 63 /* SCC3 */ 64 {CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */ 65 {CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */ 66 {CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */ 67 {CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */ 68 {CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */ 69 {CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */ 70 {CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */ 71 72 /* MII1 */ 73 {CPM_PORTA, 0, CPM_PIN_INPUT}, 74 {CPM_PORTA, 1, CPM_PIN_INPUT}, 75 {CPM_PORTA, 2, CPM_PIN_INPUT}, 76 {CPM_PORTA, 3, CPM_PIN_INPUT}, 77 {CPM_PORTA, 4, CPM_PIN_OUTPUT}, 78 {CPM_PORTA, 10, CPM_PIN_OUTPUT}, 79 {CPM_PORTA, 11, CPM_PIN_OUTPUT}, 80 {CPM_PORTB, 19, CPM_PIN_INPUT}, 81 {CPM_PORTB, 31, CPM_PIN_INPUT}, 82 {CPM_PORTC, 12, CPM_PIN_INPUT}, 83 {CPM_PORTC, 13, CPM_PIN_INPUT}, 84 {CPM_PORTE, 30, CPM_PIN_OUTPUT}, 85 {CPM_PORTE, 31, CPM_PIN_OUTPUT}, 86 87 /* MII2 */ 88 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 89 {CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 90 {CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 91 {CPM_PORTE, 16, CPM_PIN_OUTPUT}, 92 {CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 93 {CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 94 {CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 95 {CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 96 {CPM_PORTE, 21, CPM_PIN_OUTPUT}, 97 {CPM_PORTE, 22, CPM_PIN_OUTPUT}, 98 {CPM_PORTE, 23, CPM_PIN_OUTPUT}, 99 {CPM_PORTE, 24, CPM_PIN_OUTPUT}, 100 {CPM_PORTE, 25, CPM_PIN_OUTPUT}, 101 {CPM_PORTE, 26, CPM_PIN_OUTPUT}, 102 {CPM_PORTE, 27, CPM_PIN_OUTPUT}, 103 {CPM_PORTE, 28, CPM_PIN_OUTPUT}, 104 {CPM_PORTE, 29, CPM_PIN_OUTPUT}, 105 #endif 106 /* I2C */ 107 {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, 108 {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN}, 109 }; 110 111 static void __init init_ioports(void) 112 { 113 int i; 114 115 for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) { 116 struct cpm_pin *pin = &mpc885ads_pins[i]; 117 cpm1_set_pin(pin->port, pin->pin, pin->flags); 118 } 119 120 cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX); 121 cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX); 122 cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX); 123 cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX); 124 125 /* Set FEC1 and FEC2 to MII mode */ 126 clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180); 127 } 128 129 static void __init mpc885ads_setup_arch(void) 130 { 131 struct device_node *np; 132 133 cpm_reset(); 134 init_ioports(); 135 136 np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr"); 137 if (!np) { 138 printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n"); 139 return; 140 } 141 142 bcsr = of_iomap(np, 0); 143 bcsr5 = of_iomap(np, 1); 144 of_node_put(np); 145 146 if (!bcsr || !bcsr5) { 147 printk(KERN_CRIT "Could not remap BCSR\n"); 148 return; 149 } 150 151 clrbits32(&bcsr[1], BCSR1_RS232EN_1); 152 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 153 setbits32(&bcsr[1], BCSR1_RS232EN_2); 154 #else 155 clrbits32(&bcsr[1], BCSR1_RS232EN_2); 156 #endif 157 158 clrbits32(bcsr5, BCSR5_MII1_EN); 159 setbits32(bcsr5, BCSR5_MII1_RST); 160 udelay(1000); 161 clrbits32(bcsr5, BCSR5_MII1_RST); 162 163 #ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 164 clrbits32(bcsr5, BCSR5_MII2_EN); 165 setbits32(bcsr5, BCSR5_MII2_RST); 166 udelay(1000); 167 clrbits32(bcsr5, BCSR5_MII2_RST); 168 #else 169 setbits32(bcsr5, BCSR5_MII2_EN); 170 #endif 171 172 #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 173 clrbits32(&bcsr[4], BCSR4_ETH10_RST); 174 udelay(1000); 175 setbits32(&bcsr[4], BCSR4_ETH10_RST); 176 177 setbits32(&bcsr[1], BCSR1_ETHEN); 178 179 np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80"); 180 #else 181 np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40"); 182 #endif 183 184 /* The SCC3 enet registers overlap the SMC1 registers, so 185 * one of the two must be removed from the device tree. 186 */ 187 188 if (np) { 189 of_detach_node(np); 190 of_node_put(np); 191 } 192 } 193 194 static int __init mpc885ads_probe(void) 195 { 196 return of_machine_is_compatible("fsl,mpc885ads"); 197 } 198 199 static const struct of_device_id of_bus_ids[] __initconst = { 200 { .name = "soc", }, 201 { .name = "cpm", }, 202 { .name = "localbus", }, 203 {}, 204 }; 205 206 static int __init declare_of_platform_devices(void) 207 { 208 /* Publish the QE devices */ 209 of_platform_bus_probe(NULL, of_bus_ids, NULL); 210 211 return 0; 212 } 213 machine_device_initcall(mpc885_ads, declare_of_platform_devices); 214 215 define_machine(mpc885_ads) { 216 .name = "Freescale MPC885 ADS", 217 .probe = mpc885ads_probe, 218 .setup_arch = mpc885ads_setup_arch, 219 .init_IRQ = mpc8xx_pics_init, 220 .get_irq = mpc8xx_get_irq, 221 .restart = mpc8xx_restart, 222 .calibrate_decr = mpc8xx_calibrate_decr, 223 .set_rtc_time = mpc8xx_set_rtc_time, 224 .get_rtc_time = mpc8xx_get_rtc_time, 225 .progress = udbg_progress, 226 }; 227