xref: /linux/arch/powerpc/platforms/8xx/m8xx_setup.c (revision bab2c80e5a6c855657482eac9e97f5f3eedb509a)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *  Copyright (C) 1995  Linus Torvalds
4  *  Adapted from 'alpha' version by Gary Thomas
5  *  Modified by Cort Dougan (cort@cs.nmt.edu)
6  *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
7  *  Further modified for generic 8xx by Dan.
8  */
9 
10 /*
11  * bootup setup stuff..
12  */
13 
14 #include <linux/kernel.h>
15 #include <linux/interrupt.h>
16 #include <linux/init.h>
17 #include <linux/time.h>
18 #include <linux/rtc.h>
19 #include <linux/fsl_devices.h>
20 
21 #include <asm/io.h>
22 #include <asm/8xx_immap.h>
23 #include <asm/prom.h>
24 #include <asm/fs_pd.h>
25 #include <mm/mmu_decl.h>
26 
27 #include "pic.h"
28 
29 #include "mpc8xx.h"
30 
31 extern int cpm_pic_init(void);
32 extern int cpm_get_irq(void);
33 
34 /* A place holder for time base interrupts, if they are ever enabled. */
35 static irqreturn_t timebase_interrupt(int irq, void *dev)
36 {
37 	printk ("timebase_interrupt()\n");
38 
39 	return IRQ_HANDLED;
40 }
41 
42 static struct irqaction tbint_irqaction = {
43 	.handler = timebase_interrupt,
44 	.flags = IRQF_NO_THREAD,
45 	.name = "tbint",
46 };
47 
48 /* per-board overridable init_internal_rtc() function. */
49 void __init __attribute__ ((weak))
50 init_internal_rtc(void)
51 {
52 	sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
53 
54 	/* Disable the RTC one second and alarm interrupts. */
55 	clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
56 
57 	/* Enable the RTC */
58 	setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
59 	immr_unmap(sys_tmr);
60 }
61 
62 static int __init get_freq(char *name, unsigned long *val)
63 {
64 	struct device_node *cpu;
65 	const unsigned int *fp;
66 	int found = 0;
67 
68 	/* The cpu node should have timebase and clock frequency properties */
69 	cpu = of_find_node_by_type(NULL, "cpu");
70 
71 	if (cpu) {
72 		fp = of_get_property(cpu, name, NULL);
73 		if (fp) {
74 			found = 1;
75 			*val = *fp;
76 		}
77 
78 		of_node_put(cpu);
79 	}
80 
81 	return found;
82 }
83 
84 /* The decrementer counts at the system (internal) clock frequency divided by
85  * sixteen, or external oscillator divided by four.  We force the processor
86  * to use system clock divided by sixteen.
87  */
88 void __init mpc8xx_calibrate_decr(void)
89 {
90 	struct device_node *cpu;
91 	cark8xx_t __iomem *clk_r1;
92 	car8xx_t __iomem *clk_r2;
93 	sitk8xx_t __iomem *sys_tmr1;
94 	sit8xx_t __iomem *sys_tmr2;
95 	int irq, virq;
96 
97 	clk_r1 = immr_map(im_clkrstk);
98 
99 	/* Unlock the SCCR. */
100 	out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY);
101 	out_be32(&clk_r1->cark_sccrk, KAPWR_KEY);
102 	immr_unmap(clk_r1);
103 
104 	/* Force all 8xx processors to use divide by 16 processor clock. */
105 	clk_r2 = immr_map(im_clkrst);
106 	setbits32(&clk_r2->car_sccr, 0x02000000);
107 	immr_unmap(clk_r2);
108 
109 	/* Processor frequency is MHz.
110 	 */
111 	ppc_proc_freq = 50000000;
112 	if (!get_freq("clock-frequency", &ppc_proc_freq))
113 		printk(KERN_ERR "WARNING: Estimating processor frequency "
114 		                "(not found)\n");
115 
116 	ppc_tb_freq = ppc_proc_freq / 16;
117 	printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
118 
119 	/* Perform some more timer/timebase initialization.  This used
120 	 * to be done elsewhere, but other changes caused it to get
121 	 * called more than once....that is a bad thing.
122 	 *
123 	 * First, unlock all of the registers we are going to modify.
124 	 * To protect them from corruption during power down, registers
125 	 * that are maintained by keep alive power are "locked".  To
126 	 * modify these registers we have to write the key value to
127 	 * the key location associated with the register.
128 	 * Some boards power up with these unlocked, while others
129 	 * are locked.  Writing anything (including the unlock code?)
130 	 * to the unlocked registers will lock them again.  So, here
131 	 * we guarantee the registers are locked, then we unlock them
132 	 * for our use.
133 	 */
134 	sys_tmr1 = immr_map(im_sitk);
135 	out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY);
136 	out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY);
137 	out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY);
138 	out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY);
139 	out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY);
140 	out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY);
141 	immr_unmap(sys_tmr1);
142 
143 	init_internal_rtc();
144 
145 	/* Enabling the decrementer also enables the timebase interrupts
146 	 * (or from the other point of view, to get decrementer interrupts
147 	 * we have to enable the timebase).  The decrementer interrupt
148 	 * is wired into the vector table, nothing to do here for that.
149 	 */
150 	cpu = of_find_node_by_type(NULL, "cpu");
151 	virq= irq_of_parse_and_map(cpu, 0);
152 	irq = virq_to_hw(virq);
153 
154 	sys_tmr2 = immr_map(im_sit);
155 	out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) |
156 					(TBSCR_TBF | TBSCR_TBE));
157 	immr_unmap(sys_tmr2);
158 
159 	if (setup_irq(virq, &tbint_irqaction))
160 		panic("Could not allocate timer IRQ!");
161 }
162 
163 /* The RTC on the MPC8xx is an internal register.
164  * We want to protect this during power down, so we need to unlock,
165  * modify, and re-lock.
166  */
167 
168 int mpc8xx_set_rtc_time(struct rtc_time *tm)
169 {
170 	sitk8xx_t __iomem *sys_tmr1;
171 	sit8xx_t __iomem *sys_tmr2;
172 	time64_t time;
173 
174 	sys_tmr1 = immr_map(im_sitk);
175 	sys_tmr2 = immr_map(im_sit);
176 	time = rtc_tm_to_time64(tm);
177 
178 	out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY);
179 	out_be32(&sys_tmr2->sit_rtc, (u32)time);
180 	out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY);
181 
182 	immr_unmap(sys_tmr2);
183 	immr_unmap(sys_tmr1);
184 	return 0;
185 }
186 
187 void mpc8xx_get_rtc_time(struct rtc_time *tm)
188 {
189 	unsigned long data;
190 	sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
191 
192 	/* Get time from the RTC. */
193 	data = in_be32(&sys_tmr->sit_rtc);
194 	rtc_time64_to_tm(data, tm);
195 	immr_unmap(sys_tmr);
196 	return;
197 }
198 
199 void __noreturn mpc8xx_restart(char *cmd)
200 {
201 	car8xx_t __iomem *clk_r = immr_map(im_clkrst);
202 
203 
204 	local_irq_disable();
205 
206 	setbits32(&clk_r->car_plprcr, 0x00000080);
207 	/* Clear the ME bit in MSR to cause checkstop on machine check
208 	*/
209 	mtmsr(mfmsr() & ~0x1000);
210 
211 	in_8(&clk_r->res[0]);
212 	panic("Restart failed\n");
213 }
214 
215 static void cpm_cascade(struct irq_desc *desc)
216 {
217 	generic_handle_irq(cpm_get_irq());
218 }
219 
220 /* Initialize the internal interrupt controllers.  The number of
221  * interrupts supported can vary with the processor type, and the
222  * 82xx family can have up to 64.
223  * External interrupts can be either edge or level triggered, and
224  * need to be initialized by the appropriate driver.
225  */
226 void __init mpc8xx_pics_init(void)
227 {
228 	int irq;
229 
230 	if (mpc8xx_pic_init()) {
231 		printk(KERN_ERR "Failed interrupt 8xx controller  initialization\n");
232 		return;
233 	}
234 
235 	irq = cpm_pic_init();
236 	if (irq)
237 		irq_set_chained_handler(irq, cpm_cascade);
238 }
239