xref: /linux/arch/powerpc/platforms/8xx/m8xx_setup.c (revision 57390019b68b83f96eb98f490367b9df1f2d77cb)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *  Copyright (C) 1995  Linus Torvalds
4  *  Adapted from 'alpha' version by Gary Thomas
5  *  Modified by Cort Dougan (cort@cs.nmt.edu)
6  *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
7  *  Further modified for generic 8xx by Dan.
8  */
9 
10 /*
11  * bootup setup stuff..
12  */
13 
14 #include <linux/kernel.h>
15 #include <linux/interrupt.h>
16 #include <linux/init.h>
17 #include <linux/time.h>
18 #include <linux/rtc.h>
19 #include <linux/fsl_devices.h>
20 #include <linux/of.h>
21 #include <linux/of_irq.h>
22 
23 #include <asm/io.h>
24 #include <asm/8xx_immap.h>
25 #include <mm/mmu_decl.h>
26 
27 #include "pic.h"
28 
29 #include "mpc8xx.h"
30 
31 /* A place holder for time base interrupts, if they are ever enabled. */
32 static irqreturn_t timebase_interrupt(int irq, void *dev)
33 {
34 	printk ("timebase_interrupt()\n");
35 
36 	return IRQ_HANDLED;
37 }
38 
39 static int __init get_freq(char *name, unsigned long *val)
40 {
41 	struct device_node *cpu;
42 	const unsigned int *fp;
43 	int found = 0;
44 
45 	/* The cpu node should have timebase and clock frequency properties */
46 	cpu = of_get_cpu_node(0, NULL);
47 
48 	if (cpu) {
49 		fp = of_get_property(cpu, name, NULL);
50 		if (fp) {
51 			found = 1;
52 			*val = *fp;
53 		}
54 
55 		of_node_put(cpu);
56 	}
57 
58 	return found;
59 }
60 
61 /* The decrementer counts at the system (internal) clock frequency divided by
62  * sixteen, or external oscillator divided by four.  We force the processor
63  * to use system clock divided by sixteen.
64  */
65 void __init mpc8xx_calibrate_decr(void)
66 {
67 	struct device_node *cpu;
68 	int irq, virq;
69 
70 	/* Unlock the SCCR. */
71 	out_be32(&mpc8xx_immr->im_clkrstk.cark_sccrk, ~KAPWR_KEY);
72 	out_be32(&mpc8xx_immr->im_clkrstk.cark_sccrk, KAPWR_KEY);
73 
74 	/* Force all 8xx processors to use divide by 16 processor clock. */
75 	setbits32(&mpc8xx_immr->im_clkrst.car_sccr, 0x02000000);
76 
77 	/* Processor frequency is MHz.
78 	 */
79 	ppc_proc_freq = 50000000;
80 	if (!get_freq("clock-frequency", &ppc_proc_freq))
81 		printk(KERN_ERR "WARNING: Estimating processor frequency "
82 		                "(not found)\n");
83 
84 	ppc_tb_freq = ppc_proc_freq / 16;
85 	printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
86 
87 	/* Perform some more timer/timebase initialization.  This used
88 	 * to be done elsewhere, but other changes caused it to get
89 	 * called more than once....that is a bad thing.
90 	 *
91 	 * First, unlock all of the registers we are going to modify.
92 	 * To protect them from corruption during power down, registers
93 	 * that are maintained by keep alive power are "locked".  To
94 	 * modify these registers we have to write the key value to
95 	 * the key location associated with the register.
96 	 * Some boards power up with these unlocked, while others
97 	 * are locked.  Writing anything (including the unlock code?)
98 	 * to the unlocked registers will lock them again.  So, here
99 	 * we guarantee the registers are locked, then we unlock them
100 	 * for our use.
101 	 */
102 	out_be32(&mpc8xx_immr->im_sitk.sitk_tbscrk, ~KAPWR_KEY);
103 	out_be32(&mpc8xx_immr->im_sitk.sitk_rtcsck, ~KAPWR_KEY);
104 	out_be32(&mpc8xx_immr->im_sitk.sitk_tbk, ~KAPWR_KEY);
105 	out_be32(&mpc8xx_immr->im_sitk.sitk_tbscrk, KAPWR_KEY);
106 	out_be32(&mpc8xx_immr->im_sitk.sitk_rtcsck, KAPWR_KEY);
107 	out_be32(&mpc8xx_immr->im_sitk.sitk_tbk, KAPWR_KEY);
108 
109 	/* Disable the RTC one second and alarm interrupts. */
110 	clrbits16(&mpc8xx_immr->im_sit.sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
111 
112 	/* Enable the RTC */
113 	setbits16(&mpc8xx_immr->im_sit.sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
114 
115 	/* Enabling the decrementer also enables the timebase interrupts
116 	 * (or from the other point of view, to get decrementer interrupts
117 	 * we have to enable the timebase).  The decrementer interrupt
118 	 * is wired into the vector table, nothing to do here for that.
119 	 */
120 	cpu = of_get_cpu_node(0, NULL);
121 	virq= irq_of_parse_and_map(cpu, 0);
122 	of_node_put(cpu);
123 	irq = virq_to_hw(virq);
124 
125 	out_be16(&mpc8xx_immr->im_sit.sit_tbscr,
126 		 ((1 << (7 - (irq / 2))) << 8) | (TBSCR_TBF | TBSCR_TBE));
127 
128 	if (request_irq(virq, timebase_interrupt, IRQF_NO_THREAD, "tbint",
129 			NULL))
130 		panic("Could not allocate timer IRQ!");
131 }
132 
133 /* The RTC on the MPC8xx is an internal register.
134  * We want to protect this during power down, so we need to unlock,
135  * modify, and re-lock.
136  */
137 
138 int mpc8xx_set_rtc_time(struct rtc_time *tm)
139 {
140 	time64_t time;
141 
142 	time = rtc_tm_to_time64(tm);
143 
144 	out_be32(&mpc8xx_immr->im_sitk.sitk_rtck, KAPWR_KEY);
145 	out_be32(&mpc8xx_immr->im_sit.sit_rtc, (u32)time);
146 	out_be32(&mpc8xx_immr->im_sitk.sitk_rtck, ~KAPWR_KEY);
147 
148 	return 0;
149 }
150 
151 void mpc8xx_get_rtc_time(struct rtc_time *tm)
152 {
153 	unsigned long data;
154 
155 	/* Get time from the RTC. */
156 	data = in_be32(&mpc8xx_immr->im_sit.sit_rtc);
157 	rtc_time64_to_tm(data, tm);
158 	return;
159 }
160 
161 void __noreturn mpc8xx_restart(char *cmd)
162 {
163 	local_irq_disable();
164 
165 	setbits32(&mpc8xx_immr->im_clkrst.car_plprcr, 0x00000080);
166 	/* Clear the ME bit in MSR to cause checkstop on machine check
167 	*/
168 	mtmsr(mfmsr() & ~0x1000);
169 
170 	in_8(&mpc8xx_immr->im_clkrst.res[0]);
171 	panic("Restart failed\n");
172 }
173