1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Based on MPC8560 ADS and arch/ppc tqm85xx ports 4 * 5 * Maintained by Kumar Gala (see MAINTAINERS for contact information) 6 * 7 * Copyright 2008 Freescale Semiconductor Inc. 8 * 9 * Copyright (c) 2005-2006 DENX Software Engineering 10 * Stefan Roese <sr@denx.de> 11 * 12 * Based on original work by 13 * Kumar Gala <kumar.gala@freescale.com> 14 * Copyright 2004 Freescale Semiconductor Inc. 15 */ 16 17 #include <linux/stddef.h> 18 #include <linux/kernel.h> 19 #include <linux/pci.h> 20 #include <linux/kdev_t.h> 21 #include <linux/delay.h> 22 #include <linux/seq_file.h> 23 #include <linux/of.h> 24 25 #include <asm/time.h> 26 #include <asm/machdep.h> 27 #include <asm/pci-bridge.h> 28 #include <asm/mpic.h> 29 #include <mm/mmu_decl.h> 30 #include <asm/udbg.h> 31 32 #include <sysdev/fsl_soc.h> 33 #include <sysdev/fsl_pci.h> 34 35 #include "mpc85xx.h" 36 37 #ifdef CONFIG_CPM2 38 #include <asm/cpm2.h> 39 #endif /* CONFIG_CPM2 */ 40 41 static void __init tqm85xx_pic_init(void) 42 { 43 struct mpic *mpic = mpic_alloc(NULL, 0, 44 MPIC_BIG_ENDIAN, 45 0, 256, " OpenPIC "); 46 BUG_ON(mpic == NULL); 47 mpic_init(mpic); 48 49 mpc85xx_cpm2_pic_init(); 50 } 51 52 /* 53 * Setup the architecture 54 */ 55 static void __init tqm85xx_setup_arch(void) 56 { 57 if (ppc_md.progress) 58 ppc_md.progress("tqm85xx_setup_arch()", 0); 59 60 #ifdef CONFIG_CPM2 61 cpm2_reset(); 62 #endif 63 64 fsl_pci_assign_primary(); 65 } 66 67 static void tqm85xx_show_cpuinfo(struct seq_file *m) 68 { 69 uint pvid, svid, phid1; 70 71 pvid = mfspr(SPRN_PVR); 72 svid = mfspr(SPRN_SVR); 73 74 seq_printf(m, "Vendor\t\t: TQ Components\n"); 75 seq_printf(m, "PVR\t\t: 0x%x\n", pvid); 76 seq_printf(m, "SVR\t\t: 0x%x\n", svid); 77 78 /* Display cpu Pll setting */ 79 phid1 = mfspr(SPRN_HID1); 80 seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); 81 } 82 83 static void tqm85xx_ti1520_fixup(struct pci_dev *pdev) 84 { 85 unsigned int val; 86 87 /* Do not do the fixup on other platforms! */ 88 if (!machine_is(tqm85xx)) 89 return; 90 91 dev_info(&pdev->dev, "Using TI 1520 fixup on TQM85xx\n"); 92 93 /* 94 * Enable P2CCLK bit in system control register 95 * to enable CLOCK output to power chip 96 */ 97 pci_read_config_dword(pdev, 0x80, &val); 98 pci_write_config_dword(pdev, 0x80, val | (1 << 27)); 99 100 } 101 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520, 102 tqm85xx_ti1520_fixup); 103 104 machine_arch_initcall(tqm85xx, mpc85xx_common_publish_devices); 105 106 static const char * const board[] __initconst = { 107 "tqc,tqm8540", 108 "tqc,tqm8541", 109 "tqc,tqm8548", 110 "tqc,tqm8555", 111 "tqc,tqm8560", 112 NULL 113 }; 114 115 define_machine(tqm85xx) { 116 .name = "TQM85xx", 117 .compatibles = board, 118 .setup_arch = tqm85xx_setup_arch, 119 .init_IRQ = tqm85xx_pic_init, 120 .show_cpuinfo = tqm85xx_show_cpuinfo, 121 .get_irq = mpic_get_irq, 122 .progress = udbg_progress, 123 }; 124