1 /* 2 * P1022 RDK board specific routines 3 * 4 * Copyright 2012 Freescale Semiconductor, Inc. 5 * 6 * Author: Timur Tabi <timur@freescale.com> 7 * 8 * Based on p1022_ds.c 9 * 10 * This file is licensed under the terms of the GNU General Public License 11 * version 2. This program is licensed "as is" without any warranty of any 12 * kind, whether express or implied. 13 */ 14 15 #include <linux/fsl/guts.h> 16 #include <linux/pci.h> 17 #include <linux/of.h> 18 #include <linux/of_address.h> 19 #include <asm/div64.h> 20 #include <asm/mpic.h> 21 #include <asm/swiotlb.h> 22 23 #include <sysdev/fsl_soc.h> 24 #include <sysdev/fsl_pci.h> 25 #include <asm/udbg.h> 26 #include "smp.h" 27 28 #include "mpc85xx.h" 29 30 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) 31 32 /* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */ 33 #define CLKDVDR_PXCKEN 0x80000000 34 #define CLKDVDR_PXCKINV 0x10000000 35 #define CLKDVDR_PXCKDLY 0x06000000 36 #define CLKDVDR_PXCLK_MASK 0x00FF0000 37 38 /** 39 * p1022rdk_set_pixel_clock: program the DIU's clock 40 * 41 * @pixclock: the wavelength, in picoseconds, of the clock 42 */ 43 static void p1022rdk_set_pixel_clock(unsigned int pixclock) 44 { 45 struct device_node *guts_np = NULL; 46 struct ccsr_guts __iomem *guts; 47 unsigned long freq; 48 u64 temp; 49 u32 pxclk; 50 51 /* Map the global utilities registers. */ 52 guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); 53 if (!guts_np) { 54 pr_err("p1022rdk: missing global utilities device node\n"); 55 return; 56 } 57 58 guts = of_iomap(guts_np, 0); 59 of_node_put(guts_np); 60 if (!guts) { 61 pr_err("p1022rdk: could not map global utilities device\n"); 62 return; 63 } 64 65 /* Convert pixclock from a wavelength to a frequency */ 66 temp = 1000000000000ULL; 67 do_div(temp, pixclock); 68 freq = temp; 69 70 /* 71 * 'pxclk' is the ratio of the platform clock to the pixel clock. 72 * This number is programmed into the CLKDVDR register, and the valid 73 * range of values is 2-255. 74 */ 75 pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq); 76 pxclk = clamp_t(u32, pxclk, 2, 255); 77 78 /* Disable the pixel clock, and set it to non-inverted and no delay */ 79 clrbits32(&guts->clkdvdr, 80 CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK); 81 82 /* Enable the clock and set the pxclk */ 83 setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16)); 84 85 iounmap(guts); 86 } 87 88 /** 89 * p1022rdk_valid_monitor_port: set the monitor port for sysfs 90 */ 91 static enum fsl_diu_monitor_port 92 p1022rdk_valid_monitor_port(enum fsl_diu_monitor_port port) 93 { 94 return FSL_DIU_PORT_DVI; 95 } 96 97 #endif 98 99 static void __init p1022_rdk_pic_init(void) 100 { 101 struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | 102 MPIC_SINGLE_DEST_CPU, 103 0, 256, " OpenPIC "); 104 BUG_ON(mpic == NULL); 105 mpic_init(mpic); 106 } 107 108 /* 109 * Setup the architecture 110 */ 111 static void __init p1022_rdk_setup_arch(void) 112 { 113 if (ppc_md.progress) 114 ppc_md.progress("p1022_rdk_setup_arch()", 0); 115 116 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) 117 diu_ops.set_pixel_clock = p1022rdk_set_pixel_clock; 118 diu_ops.valid_monitor_port = p1022rdk_valid_monitor_port; 119 #endif 120 121 mpc85xx_smp_init(); 122 123 fsl_pci_assign_primary(); 124 125 swiotlb_detect_4g(); 126 127 pr_info("Freescale / iVeia P1022 RDK reference board\n"); 128 } 129 130 machine_arch_initcall(p1022_rdk, mpc85xx_common_publish_devices); 131 132 define_machine(p1022_rdk) { 133 .name = "P1022 RDK", 134 .compatible = "fsl,p1022rdk", 135 .setup_arch = p1022_rdk_setup_arch, 136 .init_IRQ = p1022_rdk_pic_init, 137 #ifdef CONFIG_PCI 138 .pcibios_fixup_bus = fsl_pcibios_fixup_bus, 139 .pcibios_fixup_phb = fsl_pcibios_fixup_phb, 140 #endif 141 .get_irq = mpic_get_irq, 142 .progress = udbg_progress, 143 }; 144