1 /* 2 * Board setup routines for the Emerson KSI8560 3 * 4 * Author: Alexandr Smirnov <asmirnov@ru.mvista.com> 5 * 6 * Based on mpc85xx_ads.c maintained by Kumar Gala 7 * 8 * 2008 (c) MontaVista, Software, Inc. This file is licensed under 9 * the terms of the GNU General Public License version 2. This program 10 * is licensed "as is" without any warranty of any kind, whether express 11 * or implied. 12 * 13 */ 14 15 #include <linux/stddef.h> 16 #include <linux/kernel.h> 17 #include <linux/pci.h> 18 #include <linux/kdev_t.h> 19 #include <linux/delay.h> 20 #include <linux/seq_file.h> 21 #include <linux/of_platform.h> 22 23 #include <asm/time.h> 24 #include <asm/machdep.h> 25 #include <asm/pci-bridge.h> 26 #include <asm/mpic.h> 27 #include <mm/mmu_decl.h> 28 #include <asm/udbg.h> 29 30 #include <sysdev/fsl_soc.h> 31 #include <sysdev/fsl_pci.h> 32 33 #include <asm/cpm2.h> 34 #include <sysdev/cpm2_pic.h> 35 36 #include "mpc85xx.h" 37 38 #define KSI8560_CPLD_HVR 0x04 /* Hardware Version Register */ 39 #define KSI8560_CPLD_PVR 0x08 /* PLD Version Register */ 40 #define KSI8560_CPLD_RCR1 0x30 /* Reset Command Register 1 */ 41 42 #define KSI8560_CPLD_RCR1_CPUHR 0x80 /* CPU Hard Reset */ 43 44 static void __iomem *cpld_base = NULL; 45 46 static void __noreturn machine_restart(char *cmd) 47 { 48 if (cpld_base) 49 out_8(cpld_base + KSI8560_CPLD_RCR1, KSI8560_CPLD_RCR1_CPUHR); 50 else 51 printk(KERN_ERR "Can't find CPLD base, hang forever\n"); 52 53 for (;;); 54 } 55 56 static void __init ksi8560_pic_init(void) 57 { 58 struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 59 0, 256, " OpenPIC "); 60 BUG_ON(mpic == NULL); 61 mpic_init(mpic); 62 63 mpc85xx_cpm2_pic_init(); 64 } 65 66 #ifdef CONFIG_CPM2 67 /* 68 * Setup I/O ports 69 */ 70 struct cpm_pin { 71 int port, pin, flags; 72 }; 73 74 static struct cpm_pin __initdata ksi8560_pins[] = { 75 /* SCC1 */ 76 {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 77 {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 78 {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 79 80 /* SCC2 */ 81 {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 82 {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 83 {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 84 85 /* FCC1 */ 86 {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 87 {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 88 {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 89 {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, 90 {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 91 {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 92 {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 93 {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, 94 {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, 95 {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, 96 {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 97 {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY}, 98 {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, 99 {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, 100 {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK9 */ 101 {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK10 */ 102 103 }; 104 105 static void __init init_ioports(void) 106 { 107 int i; 108 109 for (i = 0; i < ARRAY_SIZE(ksi8560_pins); i++) { 110 struct cpm_pin *pin = &ksi8560_pins[i]; 111 cpm2_set_pin(pin->port, pin->pin, pin->flags); 112 } 113 114 cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX); 115 cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX); 116 cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX); 117 cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX); 118 cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_RX); 119 cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX); 120 } 121 #endif 122 123 /* 124 * Setup the architecture 125 */ 126 static void __init ksi8560_setup_arch(void) 127 { 128 struct device_node *cpld; 129 130 cpld = of_find_compatible_node(NULL, NULL, "emerson,KSI8560-cpld"); 131 if (cpld) 132 cpld_base = of_iomap(cpld, 0); 133 else 134 printk(KERN_ERR "Can't find CPLD in device tree\n"); 135 136 of_node_put(cpld); 137 138 if (ppc_md.progress) 139 ppc_md.progress("ksi8560_setup_arch()", 0); 140 141 #ifdef CONFIG_CPM2 142 cpm2_reset(); 143 init_ioports(); 144 #endif 145 } 146 147 static void ksi8560_show_cpuinfo(struct seq_file *m) 148 { 149 uint pvid, svid, phid1; 150 151 pvid = mfspr(SPRN_PVR); 152 svid = mfspr(SPRN_SVR); 153 154 seq_printf(m, "Vendor\t\t: Emerson Network Power\n"); 155 seq_printf(m, "Board\t\t: KSI8560\n"); 156 157 if (cpld_base) { 158 seq_printf(m, "Hardware rev\t: %d\n", 159 in_8(cpld_base + KSI8560_CPLD_HVR)); 160 seq_printf(m, "CPLD rev\t: %d\n", 161 in_8(cpld_base + KSI8560_CPLD_PVR)); 162 } else 163 seq_printf(m, "Unknown Hardware and CPLD revs\n"); 164 165 seq_printf(m, "PVR\t\t: 0x%x\n", pvid); 166 seq_printf(m, "SVR\t\t: 0x%x\n", svid); 167 168 /* Display cpu Pll setting */ 169 phid1 = mfspr(SPRN_HID1); 170 seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); 171 } 172 173 machine_device_initcall(ksi8560, mpc85xx_common_publish_devices); 174 175 /* 176 * Called very early, device-tree isn't unflattened 177 */ 178 static int __init ksi8560_probe(void) 179 { 180 return of_machine_is_compatible("emerson,KSI8560"); 181 } 182 183 define_machine(ksi8560) { 184 .name = "KSI8560", 185 .probe = ksi8560_probe, 186 .setup_arch = ksi8560_setup_arch, 187 .init_IRQ = ksi8560_pic_init, 188 .show_cpuinfo = ksi8560_show_cpuinfo, 189 .get_irq = mpic_get_irq, 190 .restart = machine_restart, 191 .calibrate_decr = generic_calibrate_decr, 192 }; 193