1 /* 2 * misc setup functions for MPC83xx 3 * 4 * Maintainer: Kumar Gala <galak@kernel.crashing.org> 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or (at your 9 * option) any later version. 10 */ 11 12 #include <linux/stddef.h> 13 #include <linux/kernel.h> 14 #include <linux/of_platform.h> 15 #include <linux/pci.h> 16 17 #include <asm/io.h> 18 #include <asm/hw_irq.h> 19 #include <asm/ipic.h> 20 #include <asm/qe_ic.h> 21 #include <sysdev/fsl_soc.h> 22 #include <sysdev/fsl_pci.h> 23 24 #include "mpc83xx.h" 25 26 static __be32 __iomem *restart_reg_base; 27 28 static int __init mpc83xx_restart_init(void) 29 { 30 /* map reset restart_reg_baseister space */ 31 restart_reg_base = ioremap(get_immrbase() + 0x900, 0xff); 32 33 return 0; 34 } 35 36 arch_initcall(mpc83xx_restart_init); 37 38 void mpc83xx_restart(char *cmd) 39 { 40 #define RST_OFFSET 0x00000900 41 #define RST_PROT_REG 0x00000018 42 #define RST_CTRL_REG 0x0000001c 43 44 local_irq_disable(); 45 46 if (restart_reg_base) { 47 /* enable software reset "RSTE" */ 48 out_be32(restart_reg_base + (RST_PROT_REG >> 2), 0x52535445); 49 50 /* set software hard reset */ 51 out_be32(restart_reg_base + (RST_CTRL_REG >> 2), 0x2); 52 } else { 53 printk (KERN_EMERG "Error: Restart registers not mapped, spinning!\n"); 54 } 55 56 for (;;) ; 57 } 58 59 long __init mpc83xx_time_init(void) 60 { 61 #define SPCR_OFFSET 0x00000110 62 #define SPCR_TBEN 0x00400000 63 __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4); 64 __be32 tmp; 65 66 tmp = in_be32(spcr); 67 out_be32(spcr, tmp | SPCR_TBEN); 68 69 iounmap(spcr); 70 71 return 0; 72 } 73 74 void __init mpc83xx_ipic_init_IRQ(void) 75 { 76 struct device_node *np; 77 78 /* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */ 79 np = of_find_compatible_node(NULL, NULL, "fsl,ipic"); 80 if (!np) 81 np = of_find_node_by_type(NULL, "ipic"); 82 if (!np) 83 return; 84 85 ipic_init(np, 0); 86 87 of_node_put(np); 88 89 /* Initialize the default interrupt mapping priorities, 90 * in case the boot rom changed something on us. 91 */ 92 ipic_set_default_priority(); 93 } 94 95 #ifdef CONFIG_QUICC_ENGINE 96 void __init mpc83xx_qe_init_IRQ(void) 97 { 98 struct device_node *np; 99 100 np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); 101 if (!np) { 102 np = of_find_node_by_type(NULL, "qeic"); 103 if (!np) 104 return; 105 } 106 qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic); 107 of_node_put(np); 108 } 109 110 void __init mpc83xx_ipic_and_qe_init_IRQ(void) 111 { 112 mpc83xx_ipic_init_IRQ(); 113 mpc83xx_qe_init_IRQ(); 114 } 115 #endif /* CONFIG_QUICC_ENGINE */ 116 117 static const struct of_device_id of_bus_ids[] __initconst = { 118 { .type = "soc", }, 119 { .compatible = "soc", }, 120 { .compatible = "simple-bus" }, 121 { .compatible = "gianfar" }, 122 { .compatible = "gpio-leds", }, 123 { .type = "qe", }, 124 { .compatible = "fsl,qe", }, 125 {}, 126 }; 127 128 int __init mpc83xx_declare_of_platform_devices(void) 129 { 130 of_platform_bus_probe(NULL, of_bus_ids, NULL); 131 return 0; 132 } 133 134 #ifdef CONFIG_PCI 135 void __init mpc83xx_setup_pci(void) 136 { 137 struct device_node *np; 138 139 for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") 140 mpc83xx_add_bridge(np); 141 for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") 142 mpc83xx_add_bridge(np); 143 } 144 #endif 145