1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Performance counter support for e500 family processors. 4 * 5 * Copyright 2008-2009 Paul Mackerras, IBM Corporation. 6 * Copyright 2010 Freescale Semiconductor, Inc. 7 */ 8 #include <linux/string.h> 9 #include <linux/perf_event.h> 10 #include <asm/reg.h> 11 #include <asm/cputable.h> 12 13 /* 14 * Map of generic hardware event types to hardware events 15 * Zero if unsupported 16 */ 17 static int e500_generic_events[] = { 18 [PERF_COUNT_HW_CPU_CYCLES] = 1, 19 [PERF_COUNT_HW_INSTRUCTIONS] = 2, 20 [PERF_COUNT_HW_CACHE_MISSES] = 41, /* Data L1 cache reloads */ 21 [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12, 22 [PERF_COUNT_HW_BRANCH_MISSES] = 15, 23 [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 18, 24 [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 19, 25 }; 26 27 #define C(x) PERF_COUNT_HW_CACHE_##x 28 29 /* 30 * Table of generalized cache-related events. 31 * 0 means not supported, -1 means nonsensical, other values 32 * are event codes. 33 */ 34 static int e500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { 35 /* 36 * D-cache misses are not split into read/write/prefetch; 37 * use raw event 41. 38 */ 39 [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ 40 [C(OP_READ)] = { 27, 0 }, 41 [C(OP_WRITE)] = { 28, 0 }, 42 [C(OP_PREFETCH)] = { 29, 0 }, 43 }, 44 [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ 45 [C(OP_READ)] = { 2, 60 }, 46 [C(OP_WRITE)] = { -1, -1 }, 47 [C(OP_PREFETCH)] = { 0, 0 }, 48 }, 49 /* 50 * Assuming LL means L2, it's not a good match for this model. 51 * It allocates only on L1 castout or explicit prefetch, and 52 * does not have separate read/write events (but it does have 53 * separate instruction/data events). 54 */ 55 [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ 56 [C(OP_READ)] = { 0, 0 }, 57 [C(OP_WRITE)] = { 0, 0 }, 58 [C(OP_PREFETCH)] = { 0, 0 }, 59 }, 60 /* 61 * There are data/instruction MMU misses, but that's a miss on 62 * the chip's internal level-one TLB which is probably not 63 * what the user wants. Instead, unified level-two TLB misses 64 * are reported here. 65 */ 66 [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ 67 [C(OP_READ)] = { 26, 66 }, 68 [C(OP_WRITE)] = { -1, -1 }, 69 [C(OP_PREFETCH)] = { -1, -1 }, 70 }, 71 [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ 72 [C(OP_READ)] = { 12, 15 }, 73 [C(OP_WRITE)] = { -1, -1 }, 74 [C(OP_PREFETCH)] = { -1, -1 }, 75 }, 76 [C(NODE)] = { /* RESULT_ACCESS RESULT_MISS */ 77 [C(OP_READ)] = { -1, -1 }, 78 [C(OP_WRITE)] = { -1, -1 }, 79 [C(OP_PREFETCH)] = { -1, -1 }, 80 }, 81 }; 82 83 static int num_events = 128; 84 85 /* Upper half of event id is PMLCb, for threshold events */ 86 static u64 e500_xlate_event(u64 event_id) 87 { 88 u32 event_low = (u32)event_id; 89 u64 ret; 90 91 if (event_low >= num_events) 92 return 0; 93 94 ret = FSL_EMB_EVENT_VALID; 95 96 if (event_low >= 76 && event_low <= 81) { 97 ret |= FSL_EMB_EVENT_RESTRICTED; 98 ret |= event_id & 99 (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH); 100 } else if (event_id & 101 (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)) { 102 /* Threshold requested on non-threshold event */ 103 return 0; 104 } 105 106 return ret; 107 } 108 109 static struct fsl_emb_pmu e500_pmu = { 110 .name = "e500 family", 111 .n_counter = 4, 112 .n_restricted = 2, 113 .xlate_event = e500_xlate_event, 114 .n_generic = ARRAY_SIZE(e500_generic_events), 115 .generic_events = e500_generic_events, 116 .cache_events = &e500_cache_events, 117 }; 118 119 static int init_e500_pmu(void) 120 { 121 unsigned int pvr = mfspr(SPRN_PVR); 122 123 /* ec500mc */ 124 if (PVR_VER(pvr) == PVR_VER_E500MC || PVR_VER(pvr) == PVR_VER_E5500) 125 num_events = 256; 126 /* e500 */ 127 else if (PVR_VER(pvr) != PVR_VER_E500V1 && PVR_VER(pvr) != PVR_VER_E500V2) 128 return -ENODEV; 129 130 return register_fsl_emb_pmu(&e500_pmu); 131 } 132 133 early_initcall(init_e500_pmu); 134