1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * This file contains the routines for handling the MMU on those 4 * PowerPC implementations where the MMU substantially follows the 5 * architecture specification. This includes the 6xx, 7xx, 7xxx, 6 * and 8260 implementations but excludes the 8xx and 4xx. 7 * -- paulus 8 * 9 * Derived from arch/ppc/mm/init.c: 10 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) 11 * 12 * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) 13 * and Cort Dougan (PReP) (cort@cs.nmt.edu) 14 * Copyright (C) 1996 Paul Mackerras 15 * 16 * Derived from "arch/i386/mm/init.c" 17 * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds 18 */ 19 20 #include <linux/kernel.h> 21 #include <linux/mm.h> 22 #include <linux/init.h> 23 #include <linux/highmem.h> 24 #include <linux/memblock.h> 25 26 #include <asm/mmu.h> 27 #include <asm/machdep.h> 28 #include <asm/code-patching.h> 29 #include <asm/sections.h> 30 31 #include <mm/mmu_decl.h> 32 33 u8 __initdata early_hash[SZ_256K] __aligned(SZ_256K) = {0}; 34 35 static struct hash_pte __initdata *Hash = (struct hash_pte *)early_hash; 36 static unsigned long __initdata Hash_size, Hash_mask; 37 static unsigned int __initdata hash_mb, hash_mb2; 38 unsigned long __initdata _SDR1; 39 40 struct ppc_bat BATS[8][2]; /* 8 pairs of IBAT, DBAT */ 41 42 static struct batrange { /* stores address ranges mapped by BATs */ 43 unsigned long start; 44 unsigned long limit; 45 phys_addr_t phys; 46 } bat_addrs[8]; 47 48 #ifdef CONFIG_SMP 49 unsigned long mmu_hash_lock; 50 #endif 51 52 /* 53 * Return PA for this VA if it is mapped by a BAT, or 0 54 */ 55 phys_addr_t v_block_mapped(unsigned long va) 56 { 57 int b; 58 for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b) 59 if (va >= bat_addrs[b].start && va < bat_addrs[b].limit) 60 return bat_addrs[b].phys + (va - bat_addrs[b].start); 61 return 0; 62 } 63 64 /* 65 * Return VA for a given PA or 0 if not mapped 66 */ 67 unsigned long p_block_mapped(phys_addr_t pa) 68 { 69 int b; 70 for (b = 0; b < ARRAY_SIZE(bat_addrs); ++b) 71 if (pa >= bat_addrs[b].phys 72 && pa < (bat_addrs[b].limit-bat_addrs[b].start) 73 +bat_addrs[b].phys) 74 return bat_addrs[b].start+(pa-bat_addrs[b].phys); 75 return 0; 76 } 77 78 int __init find_free_bat(void) 79 { 80 int b; 81 int n = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4; 82 83 for (b = 0; b < n; b++) { 84 struct ppc_bat *bat = BATS[b]; 85 86 if (!(bat[1].batu & 3)) 87 return b; 88 } 89 return -1; 90 } 91 92 /* 93 * This function calculates the size of the larger block usable to map the 94 * beginning of an area based on the start address and size of that area: 95 * - max block size is 256 on 6xx. 96 * - base address must be aligned to the block size. So the maximum block size 97 * is identified by the lowest bit set to 1 in the base address (for instance 98 * if base is 0x16000000, max size is 0x02000000). 99 * - block size has to be a power of two. This is calculated by finding the 100 * highest bit set to 1. 101 */ 102 unsigned int bat_block_size(unsigned long base, unsigned long top) 103 { 104 unsigned int max_size = SZ_256M; 105 unsigned int base_shift = (ffs(base) - 1) & 31; 106 unsigned int block_shift = (fls(top - base) - 1) & 31; 107 108 return min3(max_size, 1U << base_shift, 1U << block_shift); 109 } 110 111 /* 112 * Set up one of the IBAT (block address translation) register pairs. 113 * The parameters are not checked; in particular size must be a power 114 * of 2 between 128k and 256M. 115 */ 116 static void setibat(int index, unsigned long virt, phys_addr_t phys, 117 unsigned int size, pgprot_t prot) 118 { 119 unsigned int bl = (size >> 17) - 1; 120 int wimgxpp; 121 struct ppc_bat *bat = BATS[index]; 122 unsigned long flags = pgprot_val(prot); 123 124 if (!cpu_has_feature(CPU_FTR_NEED_COHERENT)) 125 flags &= ~_PAGE_COHERENT; 126 127 wimgxpp = (flags & _PAGE_COHERENT) | (_PAGE_EXEC ? BPP_RX : BPP_XX); 128 bat[0].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */ 129 bat[0].batl = BAT_PHYS_ADDR(phys) | wimgxpp; 130 if (!is_kernel_addr(virt)) 131 bat[0].batu |= 1; /* Vp = 1 */ 132 } 133 134 static void clearibat(int index) 135 { 136 struct ppc_bat *bat = BATS[index]; 137 138 bat[0].batu = 0; 139 bat[0].batl = 0; 140 } 141 142 static unsigned long __init __mmu_mapin_ram(unsigned long base, unsigned long top) 143 { 144 int idx; 145 146 while ((idx = find_free_bat()) != -1 && base != top) { 147 unsigned int size = bat_block_size(base, top); 148 149 if (size < 128 << 10) 150 break; 151 setbat(idx, PAGE_OFFSET + base, base, size, PAGE_KERNEL_X); 152 base += size; 153 } 154 155 return base; 156 } 157 158 unsigned long __init mmu_mapin_ram(unsigned long base, unsigned long top) 159 { 160 unsigned long done; 161 unsigned long border = (unsigned long)__srwx_boundary - PAGE_OFFSET; 162 unsigned long size; 163 164 size = roundup_pow_of_two((unsigned long)_einittext - PAGE_OFFSET); 165 setibat(0, PAGE_OFFSET, 0, size, PAGE_KERNEL_X); 166 167 if (debug_pagealloc_enabled_or_kfence()) { 168 pr_debug_once("Read-Write memory mapped without BATs\n"); 169 if (base >= border) 170 return base; 171 if (top >= border) 172 top = border; 173 } 174 175 if (!strict_kernel_rwx_enabled() || base >= border || top <= border) 176 return __mmu_mapin_ram(base, top); 177 178 done = __mmu_mapin_ram(base, border); 179 if (done != border) 180 return done; 181 182 return __mmu_mapin_ram(border, top); 183 } 184 185 static bool is_module_segment(unsigned long addr) 186 { 187 if (!IS_ENABLED(CONFIG_MODULES)) 188 return false; 189 if (addr < ALIGN_DOWN(MODULES_VADDR, SZ_256M)) 190 return false; 191 if (addr > ALIGN(MODULES_END, SZ_256M) - 1) 192 return false; 193 return true; 194 } 195 196 int mmu_mark_initmem_nx(void) 197 { 198 int nb = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4; 199 int i; 200 unsigned long base = (unsigned long)_stext - PAGE_OFFSET; 201 unsigned long top = ALIGN((unsigned long)_etext - PAGE_OFFSET, SZ_128K); 202 unsigned long border = (unsigned long)__init_begin - PAGE_OFFSET; 203 unsigned long size; 204 205 for (i = 0; i < nb - 1 && base < top;) { 206 size = bat_block_size(base, top); 207 setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT); 208 base += size; 209 } 210 if (base < top) { 211 size = bat_block_size(base, top); 212 if ((top - base) > size) { 213 size <<= 1; 214 if (strict_kernel_rwx_enabled() && base + size > border) 215 pr_warn("Some RW data is getting mapped X. " 216 "Adjust CONFIG_DATA_SHIFT to avoid that.\n"); 217 } 218 setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT); 219 base += size; 220 } 221 for (; i < nb; i++) 222 clearibat(i); 223 224 update_bats(); 225 226 for (i = TASK_SIZE >> 28; i < 16; i++) { 227 /* Do not set NX on VM space for modules */ 228 if (is_module_segment(i << 28)) 229 continue; 230 231 mtsr(mfsr(i << 28) | 0x10000000, i << 28); 232 } 233 return 0; 234 } 235 236 int mmu_mark_rodata_ro(void) 237 { 238 int nb = mmu_has_feature(MMU_FTR_USE_HIGH_BATS) ? 8 : 4; 239 int i; 240 241 for (i = 0; i < nb; i++) { 242 struct ppc_bat *bat = BATS[i]; 243 244 if (bat_addrs[i].start < (unsigned long)__end_rodata) 245 bat[1].batl = (bat[1].batl & ~BPP_RW) | BPP_RX; 246 } 247 248 update_bats(); 249 250 return 0; 251 } 252 253 /* 254 * Set up one of the D BAT (block address translation) register pairs. 255 * The parameters are not checked; in particular size must be a power 256 * of 2 between 128k and 256M. 257 */ 258 void __init setbat(int index, unsigned long virt, phys_addr_t phys, 259 unsigned int size, pgprot_t prot) 260 { 261 unsigned int bl; 262 int wimgxpp; 263 struct ppc_bat *bat; 264 unsigned long flags = pgprot_val(prot); 265 266 if (index == -1) 267 index = find_free_bat(); 268 if (index == -1) { 269 pr_err("%s: no BAT available for mapping 0x%llx\n", __func__, 270 (unsigned long long)phys); 271 return; 272 } 273 bat = BATS[index]; 274 275 if ((flags & _PAGE_NO_CACHE) || 276 (cpu_has_feature(CPU_FTR_NEED_COHERENT) == 0)) 277 flags &= ~_PAGE_COHERENT; 278 279 bl = (size >> 17) - 1; 280 /* Do DBAT first */ 281 wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE 282 | _PAGE_COHERENT | _PAGE_GUARDED); 283 wimgxpp |= (flags & _PAGE_WRITE) ? BPP_RW : BPP_RX; 284 bat[1].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */ 285 bat[1].batl = BAT_PHYS_ADDR(phys) | wimgxpp; 286 if (!is_kernel_addr(virt)) 287 bat[1].batu |= 1; /* Vp = 1 */ 288 if (flags & _PAGE_GUARDED) { 289 /* G bit must be zero in IBATs */ 290 flags &= ~_PAGE_EXEC; 291 } 292 293 bat_addrs[index].start = virt; 294 bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1; 295 bat_addrs[index].phys = phys; 296 } 297 298 /* 299 * Preload a translation in the hash table 300 */ 301 static void hash_preload(struct mm_struct *mm, unsigned long ea) 302 { 303 pmd_t *pmd; 304 305 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 306 return; 307 pmd = pmd_off(mm, ea); 308 if (!pmd_none(*pmd)) 309 add_hash_page(mm->context.id, ea, pmd_val(*pmd)); 310 } 311 312 /* 313 * This is called at the end of handling a user page fault, when the 314 * fault has been handled by updating a PTE in the linux page tables. 315 * We use it to preload an HPTE into the hash table corresponding to 316 * the updated linux PTE. 317 * 318 * This must always be called with the pte lock held. 319 */ 320 void __update_mmu_cache(struct vm_area_struct *vma, unsigned long address, 321 pte_t *ptep) 322 { 323 /* 324 * We don't need to worry about _PAGE_PRESENT here because we are 325 * called with either mm->page_table_lock held or ptl lock held 326 */ 327 328 /* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */ 329 if (!pte_young(*ptep) || address >= TASK_SIZE) 330 return; 331 332 /* We have to test for regs NULL since init will get here first thing at boot */ 333 if (!current->thread.regs) 334 return; 335 336 /* We also avoid filling the hash if not coming from a fault */ 337 if (TRAP(current->thread.regs) != 0x300 && TRAP(current->thread.regs) != 0x400) 338 return; 339 340 hash_preload(vma->vm_mm, address); 341 } 342 343 /* 344 * Initialize the hash table and patch the instructions in hashtable.S. 345 */ 346 void __init MMU_init_hw(void) 347 { 348 unsigned int n_hpteg, lg_n_hpteg; 349 350 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 351 return; 352 353 if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105); 354 355 #define LG_HPTEG_SIZE 6 /* 64 bytes per HPTEG */ 356 #define SDR1_LOW_BITS ((n_hpteg - 1) >> 10) 357 #define MIN_N_HPTEG 1024 /* min 64kB hash table */ 358 359 /* 360 * Allow 1 HPTE (1/8 HPTEG) for each page of memory. 361 * This is less than the recommended amount, but then 362 * Linux ain't AIX. 363 */ 364 n_hpteg = total_memory / (PAGE_SIZE * 8); 365 if (n_hpteg < MIN_N_HPTEG) 366 n_hpteg = MIN_N_HPTEG; 367 lg_n_hpteg = __ilog2(n_hpteg); 368 if (n_hpteg & (n_hpteg - 1)) { 369 ++lg_n_hpteg; /* round up if not power of 2 */ 370 n_hpteg = 1 << lg_n_hpteg; 371 } 372 Hash_size = n_hpteg << LG_HPTEG_SIZE; 373 374 /* 375 * Find some memory for the hash table. 376 */ 377 if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322); 378 Hash = memblock_alloc(Hash_size, Hash_size); 379 if (!Hash) 380 panic("%s: Failed to allocate %lu bytes align=0x%lx\n", 381 __func__, Hash_size, Hash_size); 382 _SDR1 = __pa(Hash) | SDR1_LOW_BITS; 383 384 pr_info("Total memory = %lldMB; using %ldkB for hash table\n", 385 (unsigned long long)(total_memory >> 20), Hash_size >> 10); 386 387 388 Hash_mask = n_hpteg - 1; 389 hash_mb2 = hash_mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg; 390 if (lg_n_hpteg > 16) 391 hash_mb2 = 16 - LG_HPTEG_SIZE; 392 } 393 394 void __init MMU_init_hw_patch(void) 395 { 396 unsigned int hmask = Hash_mask >> (16 - LG_HPTEG_SIZE); 397 unsigned int hash = (unsigned int)Hash - PAGE_OFFSET; 398 399 if (!mmu_has_feature(MMU_FTR_HPTE_TABLE)) 400 return; 401 402 if (ppc_md.progress) 403 ppc_md.progress("hash:patch", 0x345); 404 if (ppc_md.progress) 405 ppc_md.progress("hash:done", 0x205); 406 407 /* WARNING: Make sure nothing can trigger a KASAN check past this point */ 408 409 /* 410 * Patch up the instructions in hashtable.S:create_hpte 411 */ 412 modify_instruction_site(&patch__hash_page_A0, 0xffff, hash >> 16); 413 modify_instruction_site(&patch__hash_page_A1, 0x7c0, hash_mb << 6); 414 modify_instruction_site(&patch__hash_page_A2, 0x7c0, hash_mb2 << 6); 415 modify_instruction_site(&patch__hash_page_B, 0xffff, hmask); 416 modify_instruction_site(&patch__hash_page_C, 0xffff, hmask); 417 418 /* 419 * Patch up the instructions in hashtable.S:flush_hash_page 420 */ 421 modify_instruction_site(&patch__flush_hash_A0, 0xffff, hash >> 16); 422 modify_instruction_site(&patch__flush_hash_A1, 0x7c0, hash_mb << 6); 423 modify_instruction_site(&patch__flush_hash_A2, 0x7c0, hash_mb2 << 6); 424 modify_instruction_site(&patch__flush_hash_B, 0xffff, hmask); 425 } 426 427 void setup_initial_memory_limit(phys_addr_t first_memblock_base, 428 phys_addr_t first_memblock_size) 429 { 430 /* We don't currently support the first MEMBLOCK not mapping 0 431 * physical on those processors 432 */ 433 BUG_ON(first_memblock_base != 0); 434 435 memblock_set_current_limit(min_t(u64, first_memblock_size, SZ_256M)); 436 } 437 438 void __init print_system_hash_info(void) 439 { 440 pr_info("Hash_size = 0x%lx\n", Hash_size); 441 if (Hash_mask) 442 pr_info("Hash_mask = 0x%lx\n", Hash_mask); 443 } 444 445 void __init early_init_mmu(void) 446 { 447 } 448